xref: /OK3568_Linux_fs/u-boot/arch/arm/dts/omap3.dtsi (revision 4882a59341e53eb6f0b4789bf948001014eff981)

/*
 * Device Tree Source for OMAP3 SoC
 *
 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
 *
 * This file is licensed under the terms of the GNU General Public License
 * version 2.  This program is licensed "as is" without any warranty of any
 * kind, whether express or implied.
 */

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/omap.h>

/ {
       compatible = "ti,omap3430", "ti,omap3";
       interrupt-parent = <&intc>;
       #address-cells = <1>;
       #size-cells = <1>;
       chosen { };

       aliases {
               i2c0 = &i2c1;
               i2c1 = &i2c2;
               i2c2 = &i2c3;
               serial0 = &uart1;
               serial1 = &uart2;
               serial2 = &uart3;
       };

       cpus {
               #address-cells = <1>;
               #size-cells = <0>;

               cpu@0 {
                       compatible = "arm,cortex-a8";
                       device_type = "cpu";
                       reg = <0x0>;

                       clocks = <&dpll1_ck>;
                       clock-names = "cpu";

                       clock-latency = <300000>; /* From omap-cpufreq driver */
               };
       };

       pmu@54000000 {
               compatible = "arm,cortex-a8-pmu";
               reg = <0x54000000 0x800000>;
               interrupts = <3>;
               ti,hwmods = "debugss";
       };

       /*
        * The soc node represents the soc top level view. It is used for IPs
        * that are not memory mapped in the MPU view or for the MPU itself.
        */
       soc {
               compatible = "ti,omap-infra";
               mpu {
                       compatible = "ti,omap3-mpu";
                       ti,hwmods = "mpu";
               };

               iva: iva {
                       compatible = "ti,iva2.2";
                       ti,hwmods = "iva";

                       dsp {
                               compatible = "ti,omap3-c64";
                       };
               };
       };

       /*
        * XXX: Use a flat representation of the OMAP3 interconnect.
        * The real OMAP interconnect network is quite complex.
        * Since it will not bring real advantage to represent that in DT for
        * the moment, just use a fake OCP bus entry to represent the whole bus
        * hierarchy.
        */
       ocp@68000000 {
               compatible = "ti,omap3-l3-smx", "simple-bus";
               reg = <0x68000000 0x10000>;
               interrupts = <9 10>;
               #address-cells = <1>;
               #size-cells = <1>;
               ranges;
               ti,hwmods = "l3_main";

               l4_core: l4@48000000 {
                       compatible = "ti,omap3-l4-core", "simple-bus";
                       #address-cells = <1>;
                       #size-cells = <1>;
                       ranges = <0 0x48000000 0x1000000>;

                       scm: scm@2000 {
                               compatible = "ti,omap3-scm", "simple-bus";
                               reg = <0x2000 0x2000>;
                               #address-cells = <1>;
                               #size-cells = <1>;
                               ranges = <0 0x2000 0x2000>;

                               omap3_pmx_core: pinmux@30 {
                                       compatible = "ti,omap3-padconf",
                                                    "pinctrl-single";
                                       reg = <0x30 0x238>;
                                       #address-cells = <1>;
                                       #size-cells = <0>;
                                       #interrupt-cells = <1>;
                                       interrupt-controller;
                                       pinctrl-single,register-width = <16>;
                                       pinctrl-single,function-mask = <0xff1f>;
                               };

                               scm_conf: scm_conf@270 {
                                       compatible = "syscon", "simple-bus";
                                       reg = <0x270 0x330>;
                                       #address-cells = <1>;
                                       #size-cells = <1>;
                                       ranges = <0 0x270 0x330>;

                                       pbias_regulator: pbias_regulator@2b0 {
                                               compatible = "ti,pbias-omap3", "ti,pbias-omap";
                                               reg = <0x2b0 0x4>;
                                               syscon = <&scm_conf>;
                                               pbias_mmc_reg: pbias_mmc_omap2430 {
                                                       regulator-name = "pbias_mmc_omap2430";
                                                       regulator-min-microvolt = <1800000>;
                                                       regulator-max-microvolt = <3000000>;
                                               };
                                       };

                                       scm_clocks: clocks {
                                               #address-cells = <1>;
                                               #size-cells = <0>;
                                       };
                               };

                               scm_clockdomains: clockdomains {
                               };

                               omap3_pmx_wkup: pinmux@a00 {
                                       compatible = "ti,omap3-padconf",
                                                    "pinctrl-single";
                                       reg = <0xa00 0x5c>;
                                       #address-cells = <1>;
                                       #size-cells = <0>;
                                       #interrupt-cells = <1>;
                                       interrupt-controller;
                                       pinctrl-single,register-width = <16>;
                                       pinctrl-single,function-mask = <0xff1f>;
                               };
                       };
               };

               aes: aes@480c5000 {
                       compatible = "ti,omap3-aes";
                       ti,hwmods = "aes";
                       reg = <0x480c5000 0x50>;
                       interrupts = <0>;
                       dmas = <&sdma 65 &sdma 66>;
                       dma-names = "tx", "rx";
               };

               prm: prm@48306000 {
                       compatible = "ti,omap3-prm";
                       reg = <0x48306000 0x4000>;
                       interrupts = <11>;

                       prm_clocks: clocks {
                               #address-cells = <1>;
                               #size-cells = <0>;
                       };

                       prm_clockdomains: clockdomains {
                       };
               };

               cm: cm@48004000 {
                       compatible = "ti,omap3-cm";
                       reg = <0x48004000 0x4000>;

                       cm_clocks: clocks {
                               #address-cells = <1>;
                               #size-cells = <0>;
                       };

                       cm_clockdomains: clockdomains {
                       };
               };

               counter32k: counter@48320000 {
                       compatible = "ti,omap-counter32k";
                       reg = <0x48320000 0x20>;
                       ti,hwmods = "counter_32k";
               };

               intc: interrupt-controller@48200000 {
                       compatible = "ti,omap3-intc";
                       interrupt-controller;
                       #interrupt-cells = <1>;
                       reg = <0x48200000 0x1000>;
               };

               sdma: dma-controller@48056000 {
                       compatible = "ti,omap3630-sdma", "ti,omap3430-sdma";
                       reg = <0x48056000 0x1000>;
                       interrupts = <12>,
                                    <13>,
                                    <14>,
                                    <15>;
                       #dma-cells = <1>;
                       dma-channels = <32>;
                       dma-requests = <96>;
               };

               gpio1: gpio@48310000 {
                       compatible = "ti,omap3-gpio";
                       reg = <0x48310000 0x200>;
                       interrupts = <29>;
                       ti,hwmods = "gpio1";
                       ti,gpio-always-on;
                       gpio-controller;
                       #gpio-cells = <2>;
                       interrupt-controller;
                       #interrupt-cells = <2>;
               };

               gpio2: gpio@49050000 {
                       compatible = "ti,omap3-gpio";
                       reg = <0x49050000 0x200>;
                       interrupts = <30>;
                       ti,hwmods = "gpio2";
                       gpio-controller;
                       #gpio-cells = <2>;
                       interrupt-controller;
                       #interrupt-cells = <2>;
               };

               gpio3: gpio@49052000 {
                       compatible = "ti,omap3-gpio";
                       reg = <0x49052000 0x200>;
                       interrupts = <31>;
                       ti,hwmods = "gpio3";
                       gpio-controller;
                       #gpio-cells = <2>;
                       interrupt-controller;
                       #interrupt-cells = <2>;
               };

               gpio4: gpio@49054000 {
                       compatible = "ti,omap3-gpio";
                       reg = <0x49054000 0x200>;
                       interrupts = <32>;
                       ti,hwmods = "gpio4";
                       gpio-controller;
                       #gpio-cells = <2>;
                       interrupt-controller;
                       #interrupt-cells = <2>;
               };

               gpio5: gpio@49056000 {
                       compatible = "ti,omap3-gpio";
                       reg = <0x49056000 0x200>;
                       interrupts = <33>;
                       ti,hwmods = "gpio5";
                       gpio-controller;
                       #gpio-cells = <2>;
                       interrupt-controller;
                       #interrupt-cells = <2>;
               };

               gpio6: gpio@49058000 {
                       compatible = "ti,omap3-gpio";
                       reg = <0x49058000 0x200>;
                       interrupts = <34>;
                       ti,hwmods = "gpio6";
                       gpio-controller;
                       #gpio-cells = <2>;
                       interrupt-controller;
                       #interrupt-cells = <2>;
               };

               uart1: serial@4806a000 {
                       compatible = "ti,omap3-uart";
                       reg = <0x4806a000 0x2000>;
                       reg-shift = <2>;
                       interrupts-extended = <&intc 72>;
                       dmas = <&sdma 49 &sdma 50>;
                       dma-names = "tx", "rx";
                       ti,hwmods = "uart1";
                       clock-frequency = <48000000>;
               };

               uart2: serial@4806c000 {
                       compatible = "ti,omap3-uart";
                       reg = <0x4806c000 0x400>;
                       interrupts-extended = <&intc 73>;
                       dmas = <&sdma 51 &sdma 52>;
                       dma-names = "tx", "rx";
                       ti,hwmods = "uart2";
                       clock-frequency = <48000000>;
               };

               uart3: serial@49020000 {
                       compatible = "ti,omap3-uart";
                       reg = <0x49020000 0x400>;
                       interrupts-extended = <&intc 74>;
                       dmas = <&sdma 53 &sdma 54>;
                       dma-names = "tx", "rx";
                       ti,hwmods = "uart3";
                       clock-frequency = <48000000>;
               };

               i2c1: i2c@48070000 {
                       compatible = "ti,omap3-i2c";
                       reg = <0x48070000 0x80>;
                       interrupts = <56>;
                       dmas = <&sdma 27 &sdma 28>;
                       dma-names = "tx", "rx";
                       #address-cells = <1>;
                       #size-cells = <0>;
                       ti,hwmods = "i2c1";
               };

               i2c2: i2c@48072000 {
                       compatible = "ti,omap3-i2c";
                       reg = <0x48072000 0x80>;
                       interrupts = <57>;
                       dmas = <&sdma 29 &sdma 30>;
                       dma-names = "tx", "rx";
                       #address-cells = <1>;
                       #size-cells = <0>;
                       ti,hwmods = "i2c2";
               };

               i2c3: i2c@48060000 {
                       compatible = "ti,omap3-i2c";
                       reg = <0x48060000 0x80>;
                       interrupts = <61>;
                       dmas = <&sdma 25 &sdma 26>;
                       dma-names = "tx", "rx";
                       #address-cells = <1>;
                       #size-cells = <0>;
                       ti,hwmods = "i2c3";
               };

               mailbox: mailbox@48094000 {
                       compatible = "ti,omap3-mailbox";
                       ti,hwmods = "mailbox";
                       reg = <0x48094000 0x200>;
                       interrupts = <26>;
                       #mbox-cells = <1>;
                       ti,mbox-num-users = <2>;
                       ti,mbox-num-fifos = <2>;
                       mbox_dsp: dsp {
                               ti,mbox-tx = <0 0 0>;
                               ti,mbox-rx = <1 0 0>;
                       };
               };

               mcspi1: spi@48098000 {
                       compatible = "ti,omap2-mcspi";
                       reg = <0x48098000 0x100>;
                       interrupts = <65>;
                       #address-cells = <1>;
                       #size-cells = <0>;
                       ti,hwmods = "mcspi1";
                       ti,spi-num-cs = <4>;
                       dmas = <&sdma 35>,
                              <&sdma 36>,
                              <&sdma 37>,
                              <&sdma 38>,
                              <&sdma 39>,
                              <&sdma 40>,
                              <&sdma 41>,
                              <&sdma 42>;
                       dma-names = "tx0", "rx0", "tx1", "rx1",
                                   "tx2", "rx2", "tx3", "rx3";
               };

               mcspi2: spi@4809a000 {
                       compatible = "ti,omap2-mcspi";
                       reg = <0x4809a000 0x100>;
                       interrupts = <66>;
                       #address-cells = <1>;
                       #size-cells = <0>;
                       ti,hwmods = "mcspi2";
                       ti,spi-num-cs = <2>;
                       dmas = <&sdma 43>,
                              <&sdma 44>,
                              <&sdma 45>,
                              <&sdma 46>;
                       dma-names = "tx0", "rx0", "tx1", "rx1";
               };

               mcspi3: spi@480b8000 {
                       compatible = "ti,omap2-mcspi";
                       reg = <0x480b8000 0x100>;
                       interrupts = <91>;
                       #address-cells = <1>;
                       #size-cells = <0>;
                       ti,hwmods = "mcspi3";
                       ti,spi-num-cs = <2>;
                       dmas = <&sdma 15>,
                              <&sdma 16>,
                              <&sdma 23>,
                              <&sdma 24>;
                       dma-names = "tx0", "rx0", "tx1", "rx1";
               };

               mcspi4: spi@480ba000 {
                       compatible = "ti,omap2-mcspi";
                       reg = <0x480ba000 0x100>;
                       interrupts = <48>;
                       #address-cells = <1>;
                       #size-cells = <0>;
                       ti,hwmods = "mcspi4";
                       ti,spi-num-cs = <1>;
                       dmas = <&sdma 70>, <&sdma 71>;
                       dma-names = "tx0", "rx0";
               };

               hdqw1w: 1w@480b2000 {
                       compatible = "ti,omap3-1w";
                       reg = <0x480b2000 0x1000>;
                       interrupts = <58>;
                       ti,hwmods = "hdq1w";
               };

               mmc1: mmc@4809c000 {
                       compatible = "ti,omap3-hsmmc";
                       reg = <0x4809c000 0x200>;
                       interrupts = <83>;
                       ti,hwmods = "mmc1";
                       ti,dual-volt;
                       dmas = <&sdma 61>, <&sdma 62>;
                       dma-names = "tx", "rx";
                       pbias-supply = <&pbias_mmc_reg>;
               };

               mmc2: mmc@480b4000 {
                       compatible = "ti,omap3-hsmmc";
                       reg = <0x480b4000 0x200>;
                       interrupts = <86>;
                       ti,hwmods = "mmc2";
                       dmas = <&sdma 47>, <&sdma 48>;
                       dma-names = "tx", "rx";
               };

               mmc3: mmc@480ad000 {
                       compatible = "ti,omap3-hsmmc";
                       reg = <0x480ad000 0x200>;
                       interrupts = <94>;
                       ti,hwmods = "mmc3";
                       dmas = <&sdma 77>, <&sdma 78>;
                       dma-names = "tx", "rx";
               };

               mmu_isp: mmu@480bd400 {
                       #iommu-cells = <0>;
                       compatible = "ti,omap2-iommu";
                       reg = <0x480bd400 0x80>;
                       interrupts = <24>;
                       ti,hwmods = "mmu_isp";
                       ti,#tlb-entries = <8>;
               };

               mmu_iva: mmu@5d000000 {
                       #iommu-cells = <0>;
                       compatible = "ti,omap2-iommu";
                       reg = <0x5d000000 0x80>;
                       interrupts = <28>;
                       ti,hwmods = "mmu_iva";
                       status = "disabled";
               };

               wdt2: wdt@48314000 {
                       compatible = "ti,omap3-wdt";
                       reg = <0x48314000 0x80>;
                       ti,hwmods = "wd_timer2";
               };

               mcbsp1: mcbsp@48074000 {
                       compatible = "ti,omap3-mcbsp";
                       reg = <0x48074000 0xff>;
                       reg-names = "mpu";
                       interrupts = <16>, /* OCP compliant interrupt */
                                    <59>, /* TX interrupt */
                                    <60>; /* RX interrupt */
                       interrupt-names = "common", "tx", "rx";
                       ti,buffer-size = <128>;
                       ti,hwmods = "mcbsp1";
                       dmas = <&sdma 31>,
                              <&sdma 32>;
                       dma-names = "tx", "rx";
                       clocks = <&mcbsp1_fck>;
                       clock-names = "fck";
                       status = "disabled";
               };

               mcbsp2: mcbsp@49022000 {
                       compatible = "ti,omap3-mcbsp";
                       reg = <0x49022000 0xff>,
                             <0x49028000 0xff>;
                       reg-names = "mpu", "sidetone";
                       interrupts = <17>, /* OCP compliant interrupt */
                                    <62>, /* TX interrupt */
                                    <63>, /* RX interrupt */
                                    <4>;  /* Sidetone */
                       interrupt-names = "common", "tx", "rx", "sidetone";
                       ti,buffer-size = <1280>;
                       ti,hwmods = "mcbsp2", "mcbsp2_sidetone";
                       dmas = <&sdma 33>,
                              <&sdma 34>;
                       dma-names = "tx", "rx";
                       clocks = <&mcbsp2_fck>, <&mcbsp2_ick>;
                       clock-names = "fck", "ick";
                       status = "disabled";
               };

               mcbsp3: mcbsp@49024000 {
                       compatible = "ti,omap3-mcbsp";
                       reg = <0x49024000 0xff>,
                             <0x4902a000 0xff>;
                       reg-names = "mpu", "sidetone";
                       interrupts = <22>, /* OCP compliant interrupt */
                                    <89>, /* TX interrupt */
                                    <90>, /* RX interrupt */
                                    <5>;  /* Sidetone */
                       interrupt-names = "common", "tx", "rx", "sidetone";
                       ti,buffer-size = <128>;
                       ti,hwmods = "mcbsp3", "mcbsp3_sidetone";
                       dmas = <&sdma 17>,
                              <&sdma 18>;
                       dma-names = "tx", "rx";
                       clocks = <&mcbsp3_fck>, <&mcbsp3_ick>;
                       clock-names = "fck", "ick";
                       status = "disabled";
               };

               mcbsp4: mcbsp@49026000 {
                       compatible = "ti,omap3-mcbsp";
                       reg = <0x49026000 0xff>;
                       reg-names = "mpu";
                       interrupts = <23>, /* OCP compliant interrupt */
                                    <54>, /* TX interrupt */
                                    <55>; /* RX interrupt */
                       interrupt-names = "common", "tx", "rx";
                       ti,buffer-size = <128>;
                       ti,hwmods = "mcbsp4";
                       dmas = <&sdma 19>,
                              <&sdma 20>;
                       dma-names = "tx", "rx";
                       clocks = <&mcbsp4_fck>;
                       clock-names = "fck";
                       status = "disabled";
               };

               mcbsp5: mcbsp@48096000 {
                       compatible = "ti,omap3-mcbsp";
                       reg = <0x48096000 0xff>;
                       reg-names = "mpu";
                       interrupts = <27>, /* OCP compliant interrupt */
                                    <81>, /* TX interrupt */
                                    <82>; /* RX interrupt */
                       interrupt-names = "common", "tx", "rx";
                       ti,buffer-size = <128>;
                       ti,hwmods = "mcbsp5";
                       dmas = <&sdma 21>,
                              <&sdma 22>;
                       dma-names = "tx", "rx";
                       clocks = <&mcbsp5_fck>;
                       clock-names = "fck";
                       status = "disabled";
               };

               sham: sham@480c3000 {
                       compatible = "ti,omap3-sham";
                       ti,hwmods = "sham";
                       reg = <0x480c3000 0x64>;
                       interrupts = <49>;
                       dmas = <&sdma 69>;
                       dma-names = "rx";
               };

               smartreflex_core: smartreflex@480cb000 {
                       compatible = "ti,omap3-smartreflex-core";
                       ti,hwmods = "smartreflex_core";
                       reg = <0x480cb000 0x400>;
                       interrupts = <19>;
               };

               smartreflex_mpu_iva: smartreflex@480c9000 {
                       compatible = "ti,omap3-smartreflex-iva";
                       ti,hwmods = "smartreflex_mpu_iva";
                       reg = <0x480c9000 0x400>;
                       interrupts = <18>;
               };

               timer1: timer@48318000 {
                       compatible = "ti,omap3430-timer";
                       reg = <0x48318000 0x400>;
                       interrupts = <37>;
                       ti,hwmods = "timer1";
                       ti,timer-alwon;
               };

               timer2: timer@49032000 {
                       compatible = "ti,omap3430-timer";
                       reg = <0x49032000 0x400>;
                       interrupts = <38>;
                       ti,hwmods = "timer2";
               };

               timer3: timer@49034000 {
                       compatible = "ti,omap3430-timer";
                       reg = <0x49034000 0x400>;
                       interrupts = <39>;
                       ti,hwmods = "timer3";
               };

               timer4: timer@49036000 {
                       compatible = "ti,omap3430-timer";
                       reg = <0x49036000 0x400>;
                       interrupts = <40>;
                       ti,hwmods = "timer4";
               };

               timer5: timer@49038000 {
                       compatible = "ti,omap3430-timer";
                       reg = <0x49038000 0x400>;
                       interrupts = <41>;
                       ti,hwmods = "timer5";
                       ti,timer-dsp;
               };

               timer6: timer@4903a000 {
                       compatible = "ti,omap3430-timer";
                       reg = <0x4903a000 0x400>;
                       interrupts = <42>;
                       ti,hwmods = "timer6";
                       ti,timer-dsp;
               };

               timer7: timer@4903c000 {
                       compatible = "ti,omap3430-timer";
                       reg = <0x4903c000 0x400>;
                       interrupts = <43>;
                       ti,hwmods = "timer7";
                       ti,timer-dsp;
               };

               timer8: timer@4903e000 {
                       compatible = "ti,omap3430-timer";
                       reg = <0x4903e000 0x400>;
                       interrupts = <44>;
                       ti,hwmods = "timer8";
                       ti,timer-pwm;
                       ti,timer-dsp;
               };

               timer9: timer@49040000 {
                       compatible = "ti,omap3430-timer";
                       reg = <0x49040000 0x400>;
                       interrupts = <45>;
                       ti,hwmods = "timer9";
                       ti,timer-pwm;
               };

               timer10: timer@48086000 {
                       compatible = "ti,omap3430-timer";
                       reg = <0x48086000 0x400>;
                       interrupts = <46>;
                       ti,hwmods = "timer10";
                       ti,timer-pwm;
               };

               timer11: timer@48088000 {
                       compatible = "ti,omap3430-timer";
                       reg = <0x48088000 0x400>;
                       interrupts = <47>;
                       ti,hwmods = "timer11";
                       ti,timer-pwm;
               };

               timer12: timer@48304000 {
                       compatible = "ti,omap3430-timer";
                       reg = <0x48304000 0x400>;
                       interrupts = <95>;
                       ti,hwmods = "timer12";
                       ti,timer-alwon;
                       ti,timer-secure;
               };

               usbhstll: usbhstll@48062000 {
                       compatible = "ti,usbhs-tll";
                       reg = <0x48062000 0x1000>;
                       interrupts = <78>;
                       ti,hwmods = "usb_tll_hs";
               };

               usbhshost: usbhshost@48064000 {
                       compatible = "ti,usbhs-host";
                       reg = <0x48064000 0x400>;
                       ti,hwmods = "usb_host_hs";
                       #address-cells = <1>;
                       #size-cells = <1>;
                       ranges;

                       usbhsohci: ohci@48064400 {
                               compatible = "ti,ohci-omap3";
                               reg = <0x48064400 0x400>;
                               interrupt-parent = <&intc>;
                               interrupts = <76>;
                       };

                       usbhsehci: ehci@48064800 {
                               compatible = "ti,ehci-omap";
                               reg = <0x48064800 0x400>;
                               interrupt-parent = <&intc>;
                               interrupts = <77>;
                       };
               };

               gpmc: gpmc@6e000000 {
                       compatible = "ti,omap3430-gpmc";
                       ti,hwmods = "gpmc";
                       reg = <0x6e000000 0x02d0>;
                       interrupts = <20>;
                       dmas = <&sdma 4>;
                       dma-names = "rxtx";
                       gpmc,num-cs = <8>;
                       gpmc,num-waitpins = <4>;
                       #address-cells = <2>;
                       #size-cells = <1>;
                       interrupt-controller;
                       #interrupt-cells = <2>;
                       gpio-controller;
                       #gpio-cells = <2>;
               };

               usb_otg_hs: usb_otg_hs@480ab000 {
                       compatible = "ti,omap3-musb";
                       reg = <0x480ab000 0x1000>;
                       interrupts = <92>, <93>;
                       interrupt-names = "mc", "dma";
                       ti,hwmods = "usb_otg_hs";
                       multipoint = <1>;
                       num-eps = <16>;
                       ram-bits = <12>;
               };

               dss: dss@48050000 {
                       compatible = "ti,omap3-dss";
                       reg = <0x48050000 0x200>;
                       status = "disabled";
                       ti,hwmods = "dss_core";
                       clocks = <&dss1_alwon_fck>;
                       clock-names = "fck";
                       #address-cells = <1>;
                       #size-cells = <1>;
                       ranges;

                       dispc@48050400 {
                               compatible = "ti,omap3-dispc";
                               reg = <0x48050400 0x400>;
                               interrupts = <25>;
                               ti,hwmods = "dss_dispc";
                               clocks = <&dss1_alwon_fck>;
                               clock-names = "fck";
                       };

                       dsi: encoder@4804fc00 {
                               compatible = "ti,omap3-dsi";
                               reg = <0x4804fc00 0x200>,
                                     <0x4804fe00 0x40>,
                                     <0x4804ff00 0x20>;
                               reg-names = "proto", "phy", "pll";
                               interrupts = <25>;
                               status = "disabled";
                               ti,hwmods = "dss_dsi1";
                               clocks = <&dss1_alwon_fck>, <&dss2_alwon_fck>;
                               clock-names = "fck", "sys_clk";
                       };

                       rfbi: encoder@48050800 {
                               compatible = "ti,omap3-rfbi";
                               reg = <0x48050800 0x100>;
                               status = "disabled";
                               ti,hwmods = "dss_rfbi";
                               clocks = <&dss1_alwon_fck>, <&dss_ick>;
                               clock-names = "fck", "ick";
                       };

                       venc: encoder@48050c00 {
                               compatible = "ti,omap3-venc";
                               reg = <0x48050c00 0x100>;
                               status = "disabled";
                               ti,hwmods = "dss_venc";
                               clocks = <&dss_tv_fck>;
                               clock-names = "fck";
                       };
               };

               ssi: ssi-controller@48058000 {
                       compatible = "ti,omap3-ssi";
                       ti,hwmods = "ssi";

                       status = "disabled";

                       reg = <0x48058000 0x1000>,
                             <0x48059000 0x1000>;
                       reg-names = "sys",
                                   "gdd";

                       interrupts = <71>;
                       interrupt-names = "gdd_mpu";

                       #address-cells = <1>;
                       #size-cells = <1>;
                       ranges;

                       ssi_port1: ssi-port@4805a000 {
                               compatible = "ti,omap3-ssi-port";

                               reg = <0x4805a000 0x800>,
                                     <0x4805a800 0x800>;
                               reg-names = "tx",
                                           "rx";

                               interrupt-parent = <&intc>;
                               interrupts = <67>,
                                            <68>;
                       };

                       ssi_port2: ssi-port@4805b000 {
                               compatible = "ti,omap3-ssi-port";

                               reg = <0x4805b000 0x800>,
                                     <0x4805b800 0x800>;
                               reg-names = "tx",
                                           "rx";

                               interrupt-parent = <&intc>;
                               interrupts = <69>,
                                            <70>;
                       };
               };
       };
};

/include/ "omap3xxx-clocks.dtsi"