xref: /OK3568_Linux_fs/kernel/drivers/gpu/drm/panel/Kconfig (revision 4882a59341e53eb6f0b4789bf948001014eff981) 
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	bool
4	depends on DRM
5	help
6	  Panel registration and lookup framework.
7
8menu "Display Panels"
9	depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ARM_VERSATILE
12	tristate "ARM Versatile panel driver"
13	depends on OF
14	depends on MFD_SYSCON
15	select VIDEOMODE_HELPERS
16	help
17	  This driver supports the ARM Versatile panels connected to ARM
18	  reference designs. The panel is detected using special registers
19	  in the Versatile family syscon registers.
20
21config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
22	tristate "ASUS Z00T TM5P5 NT35596 panel"
23	depends on GPIOLIB && OF
24	depends on DRM_MIPI_DSI
25	depends on BACKLIGHT_CLASS_DEVICE
26	help
27	  Say Y here if you want to enable support for the ASUS TMP5P5
28	  NT35596 1080x1920 video mode panel as found in some Asus
29	  Zenfone 2 Laser Z00T devices.
30
31config DRM_PANEL_BOE_HIMAX8279D
32	tristate "Boe Himax8279d panel"
33	depends on OF
34	depends on DRM_MIPI_DSI
35	depends on BACKLIGHT_CLASS_DEVICE
36	help
37	  Say Y here if you want to enable support for Boe Himax8279d
38	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
39	  24 bit RGB per pixel. It provides a MIPI DSI interface to
40	  the host and has a built-in LED backlight.
41
42config DRM_PANEL_BOE_TV101WUM_NL6
43	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
44	depends on OF
45	depends on DRM_MIPI_DSI
46	depends on BACKLIGHT_CLASS_DEVICE
47	help
48	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
49	  45NA WUXGA PANEL DSI Video Mode panel
50
51config DRM_PANEL_LVDS
52	tristate "Generic LVDS panel driver"
53	depends on OF
54	depends on BACKLIGHT_CLASS_DEVICE
55	select VIDEOMODE_HELPERS
56	help
57	  This driver supports LVDS panels that don't require device-specific
58	  handling of power supplies or control signals. It implements automatic
59	  backlight handling if the panel is attached to a backlight controller.
60
61config DRM_PANEL_SIMPLE
62	tristate "support for simple panels"
63	depends on OF
64	depends on BACKLIGHT_CLASS_DEVICE
65	select VIDEOMODE_HELPERS
66	help
67	  DRM panel driver for dumb panels that need at most a regulator and
68	  a GPIO to be powered up. Optionally a backlight can be attached so
69	  that it can be automatically turned off when the panel goes into a
70	  low power state.
71
72config DRM_PANEL_ELIDA_KD35T133
73	tristate "Elida KD35T133 panel driver"
74	depends on OF
75	depends on DRM_MIPI_DSI
76	depends on BACKLIGHT_CLASS_DEVICE
77	help
78	  Say Y here if you want to enable support for the Elida
79	  KD35T133 controller for 320x480 LCD panels with MIPI-DSI
80	  system interfaces.
81
82config DRM_PANEL_FEIXIN_K101_IM2BA02
83	tristate "Feixin K101 IM2BA02 panel"
84	depends on OF
85	depends on DRM_MIPI_DSI
86	depends on BACKLIGHT_CLASS_DEVICE
87	help
88	  Say Y here if you want to enable support for the Feixin K101 IM2BA02
89	  4-lane 800x1280 MIPI DSI panel.
90
91config DRM_PANEL_FEIYANG_FY07024DI26A30D
92	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
93	depends on OF
94	depends on DRM_MIPI_DSI
95	depends on BACKLIGHT_CLASS_DEVICE
96	help
97	  Say Y if you want to enable support for panels based on the
98	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
99
100config DRM_PANEL_ILITEK_IL9322
101	tristate "Ilitek ILI9322 320x240 QVGA panels"
102	depends on OF && SPI
103	select REGMAP
104	help
105	  Say Y here if you want to enable support for Ilitek IL9322
106	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
107
108config DRM_PANEL_ILITEK_ILI9881C
109	tristate "Ilitek ILI9881C-based panels"
110	depends on OF
111	depends on DRM_MIPI_DSI
112	depends on BACKLIGHT_CLASS_DEVICE
113	help
114	  Say Y if you want to enable support for panels based on the
115	  Ilitek ILI9881c controller.
116
117config DRM_PANEL_INNOLUX_P079ZCA
118	tristate "Innolux P079ZCA panel"
119	depends on OF
120	depends on DRM_MIPI_DSI
121	depends on BACKLIGHT_CLASS_DEVICE
122	help
123	  Say Y here if you want to enable support for Innolux P079ZCA
124	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
125	  24 bit RGB per pixel. It provides a MIPI DSI interface to
126	  the host and has a built-in LED backlight.
127
128config DRM_PANEL_JDI_LT070ME05000
129	tristate "JDI LT070ME05000 WUXGA DSI panel"
130	depends on OF
131	depends on DRM_MIPI_DSI
132	depends on BACKLIGHT_CLASS_DEVICE
133	help
134	  Say Y here if you want to enable support for JDI DSI video mode
135	  panel as found in Google Nexus 7 (2013) devices.
136	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
137	  24 bit per pixel.
138
139config DRM_PANEL_KINGDISPLAY_KD097D04
140	tristate "Kingdisplay kd097d04 panel"
141	depends on OF
142	depends on DRM_MIPI_DSI
143	depends on BACKLIGHT_CLASS_DEVICE
144	help
145	  Say Y here if you want to enable support for Kingdisplay kd097d04
146	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
147	  24 bit RGB per pixel. It provides a MIPI DSI interface to
148	  the host and has a built-in LED backlight.
149
150config DRM_PANEL_LEADTEK_LTK050H3146W
151	tristate "Leadtek LTK050H3146W panel"
152	depends on OF
153	depends on DRM_MIPI_DSI
154	depends on BACKLIGHT_CLASS_DEVICE
155	help
156	  Say Y here if you want to enable support for Leadtek LTK050H3146W
157	  TFT-LCD modules. The panel has a 720x1280 resolution and uses
158	  24 bit RGB per pixel. It provides a MIPI DSI interface to
159	  the host and has a built-in LED backlight.
160
161config DRM_PANEL_LEADTEK_LTK500HD1829
162	tristate "Leadtek LTK500HD1829 panel"
163	depends on OF
164	depends on DRM_MIPI_DSI
165	depends on BACKLIGHT_CLASS_DEVICE
166	help
167	  Say Y here if you want to enable support for Kingdisplay kd097d04
168	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
169	  24 bit RGB per pixel. It provides a MIPI DSI interface to
170	  the host and has a built-in LED backlight.
171
172config DRM_PANEL_SAMSUNG_LD9040
173	tristate "Samsung LD9040 RGB/SPI panel"
174	depends on OF && SPI
175	select VIDEOMODE_HELPERS
176
177config DRM_PANEL_LG_LB035Q02
178	tristate "LG LB035Q024573 RGB panel"
179	depends on GPIOLIB && OF && SPI
180	help
181	  Say Y here if you want to enable support for the LB035Q02 RGB panel
182	  (found on the Gumstix Overo Palo35 board). To compile this driver as
183	  a module, choose M here.
184
185config DRM_PANEL_LG_LG4573
186	tristate "LG4573 RGB/SPI panel"
187	depends on OF && SPI
188	select VIDEOMODE_HELPERS
189	help
190	  Say Y here if you want to enable support for LG4573 RGB panel.
191	  To compile this driver as a module, choose M here.
192
193config DRM_PANEL_NEC_NL8048HL11
194	tristate "NEC NL8048HL11 RGB panel"
195	depends on GPIOLIB && OF && SPI
196	help
197	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
198	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
199	  as a module, choose M here.
200
201config DRM_PANEL_NOVATEK_NT35510
202	tristate "Novatek NT35510 RGB panel driver"
203	depends on OF
204	depends on DRM_MIPI_DSI
205	depends on BACKLIGHT_CLASS_DEVICE
206	help
207	  Say Y here if you want to enable support for the panels built
208	  around the Novatek NT35510 display controller, such as some
209	  Hydis panels.
210
211config DRM_PANEL_NOVATEK_NT39016
212	tristate "Novatek NT39016 RGB/SPI panel"
213	depends on OF && SPI
214	depends on BACKLIGHT_CLASS_DEVICE
215	select REGMAP_SPI
216	help
217	  Say Y here if you want to enable support for the panels built
218	  around the Novatek NT39016 display controller.
219
220config DRM_PANEL_MANTIX_MLAF057WE51
221	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
222	depends on OF
223	depends on DRM_MIPI_DSI
224	depends on BACKLIGHT_CLASS_DEVICE
225	help
226	  Say Y here if you want to enable support for the Mantix
227	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
228	  has a resolution of 720x1440 pixels, a built in backlight and touch
229	  controller.
230
231config DRM_PANEL_MAXIM_MAX96752F
232	tristate "Maxim MAX96752F-based panels"
233	depends on OF
234	depends on BACKLIGHT_CLASS_DEVICE
235	help
236	  Say Y if you want to enable support for panels based on the
237	  Maxim MAX96752F.
238
239config DRM_PANEL_MAXIM_MAX96772
240	tristate "Maxim MAX96772-based panels"
241	depends on OF
242	depends on BACKLIGHT_CLASS_DEVICE
243	help
244	  Say Y if you want to enable support for panels based on the
245	  Maxim MAX96772.
246
247config DRM_PANEL_OLIMEX_LCD_OLINUXINO
248	tristate "Olimex LCD-OLinuXino panel"
249	depends on OF
250	depends on I2C
251	depends on BACKLIGHT_CLASS_DEVICE
252	select CRC32
253	help
254	  The panel is used with different sizes LCDs, from 480x272 to
255	  1280x800, and 24 bit per pixel.
256
257	  Say Y here if you want to enable support for Olimex Ltd.
258	  LCD-OLinuXino panel.
259
260config DRM_PANEL_ORISETECH_OTM8009A
261	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
262	depends on OF
263	depends on DRM_MIPI_DSI
264	depends on BACKLIGHT_CLASS_DEVICE
265	help
266	  Say Y here if you want to enable support for Orise Technology
267	  otm8009a 480x800 dsi 2dl panel.
268
269config DRM_PANEL_OSD_OSD101T2587_53TS
270	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
271	depends on OF
272	depends on DRM_MIPI_DSI
273	depends on BACKLIGHT_CLASS_DEVICE
274	help
275	  Say Y here if you want to enable support for One Stop Displays
276	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
277
278config DRM_PANEL_PANASONIC_VVX10F034N00
279	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
280	depends on OF
281	depends on DRM_MIPI_DSI
282	depends on BACKLIGHT_CLASS_DEVICE
283	help
284	  Say Y here if you want to enable support for Panasonic VVX10F034N00
285	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
286	  Xperia Z2 tablets
287
288config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
289	tristate "Raspberry Pi 7-inch touchscreen panel"
290	depends on DRM_MIPI_DSI
291	help
292	  Say Y here if you want to enable support for the Raspberry
293	  Pi 7" Touchscreen.  To compile this driver as a module,
294	  choose M here.
295
296config DRM_PANEL_RAYDIUM_RM67191
297	tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
298	depends on OF
299	depends on DRM_MIPI_DSI
300	depends on BACKLIGHT_CLASS_DEVICE
301	help
302	  Say Y here if you want to enable support for Raydium RM67191 FHD
303	  (1080x1920) DSI panel.
304
305config DRM_PANEL_RAYDIUM_RM68200
306	tristate "Raydium RM68200 720x1280 DSI video mode panel"
307	depends on OF
308	depends on DRM_MIPI_DSI
309	depends on BACKLIGHT_CLASS_DEVICE
310	help
311	  Say Y here if you want to enable support for Raydium RM68200
312	  720x1280 DSI video mode panel.
313
314config DRM_PANEL_RONBO_RB070D30
315	tristate "Ronbo Electronics RB070D30 panel"
316	depends on OF
317	depends on DRM_MIPI_DSI
318	depends on BACKLIGHT_CLASS_DEVICE
319	help
320	  Say Y here if you want to enable support for Ronbo Electronics
321	  RB070D30 1024x600 DSI panel.
322
323config DRM_PANEL_SAMSUNG_S6D16D0
324	tristate "Samsung S6D16D0 DSI video mode panel"
325	depends on OF
326	depends on DRM_MIPI_DSI
327	select VIDEOMODE_HELPERS
328
329config DRM_PANEL_SAMSUNG_S6E3HA2
330	tristate "Samsung S6E3HA2 DSI video mode panel"
331	depends on OF
332	depends on DRM_MIPI_DSI
333	depends on BACKLIGHT_CLASS_DEVICE
334	select VIDEOMODE_HELPERS
335
336config DRM_PANEL_SAMSUNG_S6E63J0X03
337	tristate "Samsung S6E63J0X03 DSI command mode panel"
338	depends on OF
339	depends on DRM_MIPI_DSI
340	depends on BACKLIGHT_CLASS_DEVICE
341	select VIDEOMODE_HELPERS
342
343config DRM_PANEL_SAMSUNG_S6E63M0
344	tristate "Samsung S6E63M0 RGB panel"
345	depends on OF
346	depends on BACKLIGHT_CLASS_DEVICE
347	help
348	  Say Y here if you want to enable support for Samsung S6E63M0
349	  AMOLED LCD panel. This panel can be accessed using SPI or
350	  DSI.
351
352config DRM_PANEL_SAMSUNG_S6E63M0_SPI
353	tristate "Samsung S6E63M0 RGB SPI interface"
354	depends on SPI
355	depends on DRM_PANEL_SAMSUNG_S6E63M0
356	default DRM_PANEL_SAMSUNG_S6E63M0
357	help
358	  Say Y here if you want to be able to access the Samsung
359	  S6E63M0 panel using SPI.
360
361config DRM_PANEL_SAMSUNG_S6E63M0_DSI
362	tristate "Samsung S6E63M0 RGB DSI interface"
363	depends on DRM_MIPI_DSI
364	depends on DRM_PANEL_SAMSUNG_S6E63M0
365	help
366	  Say Y here if you want to be able to access the Samsung
367	  S6E63M0 panel using DSI.
368
369config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
370	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
371	depends on OF
372	select DRM_MIPI_DSI
373	select VIDEOMODE_HELPERS
374
375config DRM_PANEL_SAMSUNG_S6E8AA0
376	tristate "Samsung S6E8AA0 DSI video mode panel"
377	depends on OF
378	select DRM_MIPI_DSI
379	select VIDEOMODE_HELPERS
380
381config DRM_PANEL_SEIKO_43WVF1G
382	tristate "Seiko 43WVF1G panel"
383	depends on OF
384	depends on BACKLIGHT_CLASS_DEVICE
385	select VIDEOMODE_HELPERS
386	help
387	  Say Y here if you want to enable support for the Seiko
388	  43WVF1G controller for 800x480 LCD panels
389
390config DRM_PANEL_SHARP_LQ101R1SX01
391	tristate "Sharp LQ101R1SX01 panel"
392	depends on OF
393	depends on DRM_MIPI_DSI
394	depends on BACKLIGHT_CLASS_DEVICE
395	help
396	  Say Y here if you want to enable support for Sharp LQ101R1SX01
397	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
398	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
399	  the host and has a built-in LED backlight.
400
401	  To compile this driver as a module, choose M here: the module
402	  will be called panel-sharp-lq101r1sx01.
403
404config DRM_PANEL_SHARP_LS037V7DW01
405	tristate "Sharp LS037V7DW01 VGA LCD panel"
406	depends on GPIOLIB && OF && REGULATOR
407	help
408	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
409	  (480x640) LCD panel (found on the TI SDP3430 board).
410
411config DRM_PANEL_SHARP_LS043T1LE01
412	tristate "Sharp LS043T1LE01 qHD video mode panel"
413	depends on OF
414	depends on DRM_MIPI_DSI
415	depends on BACKLIGHT_CLASS_DEVICE
416	help
417	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
418	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
419
420config DRM_PANEL_SITRONIX_ST7701
421	tristate "Sitronix ST7701 panel driver"
422	depends on OF
423	depends on DRM_MIPI_DSI
424	depends on BACKLIGHT_CLASS_DEVICE
425	help
426	  Say Y here if you want to enable support for the Sitronix
427	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
428	  system interfaces.
429
430config DRM_PANEL_SITRONIX_ST7703
431	tristate "Sitronix ST7703 based MIPI touchscreen panels"
432	depends on OF
433	depends on DRM_MIPI_DSI
434	depends on BACKLIGHT_CLASS_DEVICE
435	help
436	  Say Y here if you want to enable support for Sitronix ST7703 based
437	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
438	  the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
439	  in backlight and touch controller.
440	  Touch input support is provided by the goodix driver and needs to be
441	  selected separately.
442
443config DRM_PANEL_SITRONIX_ST7789V
444	tristate "Sitronix ST7789V panel"
445	depends on OF && SPI
446	depends on BACKLIGHT_CLASS_DEVICE
447	help
448	  Say Y here if you want to enable support for the Sitronix
449	  ST7789V controller for 240x320 LCD panels
450
451config DRM_PANEL_SONY_ACX424AKP
452	tristate "Sony ACX424AKP DSI command mode panel"
453	depends on OF
454	depends on DRM_MIPI_DSI
455	depends on BACKLIGHT_CLASS_DEVICE
456	select VIDEOMODE_HELPERS
457	help
458	  Say Y here if you want to enable the Sony ACX424 display
459	  panel. This panel supports DSI in both command and video
460	  mode.
461
462config DRM_PANEL_SONY_ACX565AKM
463	tristate "Sony ACX565AKM panel"
464	depends on GPIOLIB && OF && SPI
465	depends on BACKLIGHT_CLASS_DEVICE
466	help
467	  Say Y here if you want to enable support for the Sony ACX565AKM
468	  800x600 3.5" panel (found on the Nokia N900).
469
470config DRM_PANEL_TPO_TD028TTEC1
471	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
472	depends on OF && SPI
473	depends on BACKLIGHT_CLASS_DEVICE
474	help
475	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
476	  2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
477
478config DRM_PANEL_TPO_TD043MTEA1
479	tristate "Toppoly (TPO) TD043MTEA1 panel driver"
480	depends on GPIOLIB && OF && REGULATOR && SPI
481	help
482	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
483	  4.3" panel (found on the OMAP3 Pandora board).
484
485config DRM_PANEL_TPO_TPG110
486	tristate "TPO TPG 800x400 panel"
487	depends on OF && SPI && GPIOLIB
488	depends on BACKLIGHT_CLASS_DEVICE
489	help
490	  Say Y here if you want to enable support for TPO TPG110
491	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
492	  800x400 LCD panels.
493
494config DRM_PANEL_TRULY_NT35597_WQXGA
495	tristate "Truly WQXGA"
496	depends on OF
497	depends on DRM_MIPI_DSI
498	help
499	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
500	  Video Mode panel
501
502config DRM_PANEL_VISIONOX_RM69299
503	tristate "Visionox RM69299"
504	depends on OF
505	depends on DRM_MIPI_DSI
506	help
507	  Say Y here if you want to enable support for Visionox
508	  RM69299  DSI Video Mode panel.
509
510config DRM_PANEL_XINPENG_XPP055C272
511	tristate "Xinpeng XPP055C272 panel driver"
512	depends on OF
513	depends on DRM_MIPI_DSI
514	depends on BACKLIGHT_CLASS_DEVICE
515	help
516	  Say Y here if you want to enable support for the Xinpeng
517	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
518	  system interfaces.
519endmenu
520