xref: /OK3568_Linux_fs/kernel/arch/sh/boards/mach-microdev/fdc37c93xapm.c (revision 4882a59341e53eb6f0b4789bf948001014eff981)

// SPDX-License-Identifier: GPL-2.0
/*
 * Setup for the SMSC FDC37C93xAPM
 *
 * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
 * Copyright (C) 2003, 2004 SuperH, Inc.
 * Copyright (C) 2004, 2005 Paul Mundt
 *
 * SuperH SH4-202 MicroDev board support.
 */
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/err.h>
#include <mach/microdev.h>

#define SMSC_CONFIG_PORT_ADDR	 (0x3F0)
#define SMSC_INDEX_PORT_ADDR	 SMSC_CONFIG_PORT_ADDR
#define SMSC_DATA_PORT_ADDR	 (SMSC_INDEX_PORT_ADDR + 1)

#define SMSC_ENTER_CONFIG_KEY	 0x55
#define SMSC_EXIT_CONFIG_KEY	 0xaa

#define SMCS_LOGICAL_DEV_INDEX	 0x07	/* Logical Device Number */
#define SMSC_DEVICE_ID_INDEX	 0x20	/* Device ID */
#define SMSC_DEVICE_REV_INDEX	 0x21	/* Device Revision */
#define SMSC_ACTIVATE_INDEX	 0x30	/* Activate */
#define SMSC_PRIMARY_BASE_INDEX	 0x60	/* Primary Base Address */
#define SMSC_SECONDARY_BASE_INDEX 0x62	/* Secondary Base Address */
#define SMSC_PRIMARY_INT_INDEX	 0x70	/* Primary Interrupt Select */
#define SMSC_SECONDARY_INT_INDEX 0x72	/* Secondary Interrupt Select */
#define SMSC_HDCS0_INDEX	 0xf0	/* HDCS0 Address Decoder */
#define SMSC_HDCS1_INDEX	 0xf1	/* HDCS1 Address Decoder */

#define SMSC_IDE1_DEVICE	1	/* IDE #1 logical device */
#define SMSC_IDE2_DEVICE	2	/* IDE #2 logical device */
#define SMSC_PARALLEL_DEVICE	3	/* Parallel Port logical device */
#define SMSC_SERIAL1_DEVICE	4	/* Serial #1 logical device */
#define SMSC_SERIAL2_DEVICE	5	/* Serial #2 logical device */
#define SMSC_KEYBOARD_DEVICE	7	/* Keyboard logical device */
#define SMSC_CONFIG_REGISTERS	8	/* Configuration Registers (Aux I/O) */

#define SMSC_READ_INDEXED(index) ({ \
	outb((index), SMSC_INDEX_PORT_ADDR); \
	inb(SMSC_DATA_PORT_ADDR); })
#define SMSC_WRITE_INDEXED(val, index) ({ \
	outb((index), SMSC_INDEX_PORT_ADDR); \
	outb((val),   SMSC_DATA_PORT_ADDR); })

#define	IDE1_PRIMARY_BASE	0x01f0	/* Task File Registe base for IDE #1 */
#define	IDE1_SECONDARY_BASE	0x03f6	/* Miscellaneous AT registers for IDE #1 */
#define	IDE2_PRIMARY_BASE	0x0170	/* Task File Registe base for IDE #2 */
#define	IDE2_SECONDARY_BASE	0x0376	/* Miscellaneous AT registers for IDE #2 */

#define SERIAL1_PRIMARY_BASE	0x03f8
#define SERIAL2_PRIMARY_BASE	0x02f8

#define	MSB(x)		( (x) >> 8 )
#define	LSB(x)		( (x) & 0xff )

	/* General-Purpose base address on CPU-board FPGA */
#define	MICRODEV_FPGA_GP_BASE		0xa6100000ul

static int __init smsc_superio_setup(void)
{

	unsigned char devid, devrev;

		/* Initially the chip is in run state */
		/* Put it into configuration state */
	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);

		/* Read device ID info */
	devid  = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
	devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX);

	if ((devid == 0x30) && (devrev == 0x01))
		printk("SMSC FDC37C93xAPM SuperIO device detected\n");
	else
		return -ENODEV;

		/* Select the keyboard device */
	SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
		/* enable it */
	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
		/* enable the interrupts */
	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_KEYBOARD, SMSC_PRIMARY_INT_INDEX);
	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_MOUSE, SMSC_SECONDARY_INT_INDEX);

		/* Select the Serial #1 device */
	SMSC_WRITE_INDEXED(SMSC_SERIAL1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
		/* enable it */
	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
		/* program with port addresses */
	SMSC_WRITE_INDEXED(MSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
	SMSC_WRITE_INDEXED(LSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
		/* enable the interrupts */
	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL1, SMSC_PRIMARY_INT_INDEX);

		/* Select the Serial #2 device */
	SMSC_WRITE_INDEXED(SMSC_SERIAL2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
		/* enable it */
	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
		/* program with port addresses */
	SMSC_WRITE_INDEXED(MSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
	SMSC_WRITE_INDEXED(LSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
		/* enable the interrupts */
	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL2, SMSC_PRIMARY_INT_INDEX);

		/* Select the IDE#1 device */
	SMSC_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
		/* enable it */
	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
		/* program with port addresses */
	SMSC_WRITE_INDEXED(MSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
	SMSC_WRITE_INDEXED(LSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
	SMSC_WRITE_INDEXED(MSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
	SMSC_WRITE_INDEXED(LSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
	SMSC_WRITE_INDEXED(0x0c, SMSC_HDCS0_INDEX);
	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS1_INDEX);
		/* select the interrupt */
	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE1, SMSC_PRIMARY_INT_INDEX);

		/* Select the IDE#2 device */
	SMSC_WRITE_INDEXED(SMSC_IDE2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
		/* enable it */
	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
		/* program with port addresses */
	SMSC_WRITE_INDEXED(MSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
	SMSC_WRITE_INDEXED(LSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
	SMSC_WRITE_INDEXED(MSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
	SMSC_WRITE_INDEXED(LSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
		/* select the interrupt */
	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE2, SMSC_PRIMARY_INT_INDEX);

		/* Select the configuration registers */
	SMSC_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, SMCS_LOGICAL_DEV_INDEX);
		/* enable the appropriate GPIO pins for IDE functionality:
		 * bit[0]   In/Out		1==input;  0==output
		 * bit[1]   Polarity		1==invert; 0==no invert
		 * bit[2]   Int Enb #1		1==Enable Combined IRQ #1; 0==disable
		 * bit[3:4] Function Select	00==original; 01==Alternate Function #1
		 */
	SMSC_WRITE_INDEXED(0x00, 0xc2);	/* GP42 = nIDE1_OE */
	SMSC_WRITE_INDEXED(0x01, 0xc5);	/* GP45 = IDE1_IRQ */
	SMSC_WRITE_INDEXED(0x00, 0xc6);	/* GP46 = nIOROP */
	SMSC_WRITE_INDEXED(0x00, 0xc7);	/* GP47 = nIOWOP */
	SMSC_WRITE_INDEXED(0x08, 0xe8);	/* GP20 = nIDE2_OE */

		/* Exit the configuration state */
	outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);

	return 0;
}
device_initcall(smsc_superio_setup);