xref: /OK3568_Linux_fs/kernel/arch/powerpc/boot/dts/fsl/t4240qds.dts (revision 4882a59341e53eb6f0b4789bf948001014eff981)

/*
 * T4240QDS Device Tree Source
 *
 * Copyright 2012 - 2015 Freescale Semiconductor Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in the
 *       documentation and/or other materials provided with the distribution.
 *     * Neither the name of Freescale Semiconductor nor the
 *       names of its contributors may be used to endorse or promote products
 *       derived from this software without specific prior written permission.
 *
 *
 * ALTERNATIVELY, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") as published by the Free Software
 * Foundation, either version 2 of that License or (at your option) any
 * later version.
 *
 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/include/ "t4240si-pre.dtsi"

/ {
	model = "fsl,T4240QDS";
	compatible = "fsl,T4240QDS";
	#address-cells = <2>;
	#size-cells = <2>;
	interrupt-parent = <&mpic>;

	aliases{
		phy_rgmii1 = &phyrgmii1;
		phy_rgmii2 = &phyrgmii2;
		phy_sgmii3 = &phy3;
		phy_sgmii4 = &phy4;
		phy_sgmii11 = &phy11;
		phy_sgmii12 = &phy12;
		sgmii_phy11 = &sgmiiphy11;
		sgmii_phy12 = &sgmiiphy12;
		sgmii_phy13 = &sgmiiphy13;
		sgmii_phy14 = &sgmiiphy14;
		sgmii_phy21 = &sgmiiphy21;
		sgmii_phy22 = &sgmiiphy22;
		sgmii_phy23 = &sgmiiphy23;
		sgmii_phy24 = &sgmiiphy24;
		sgmii_phy31 = &sgmiiphy31;
		sgmii_phy32 = &sgmiiphy32;
		sgmii_phy33 = &sgmiiphy33;
		sgmii_phy34 = &sgmiiphy34;
		sgmii_phy41 = &sgmiiphy41;
		sgmii_phy42 = &sgmiiphy42;
		sgmii_phy43 = &sgmiiphy43;
		sgmii_phy44 = &sgmiiphy44;
		phy_xfi1 = &xfiphy1;
		phy_xfi2 = &xfiphy2;
		phy_xfi3 = &xfiphy3;
		phy_xfi4 = &xfiphy4;
		xfi_pcs_mdio1 = &xfimdio0;
		xfi_pcs_mdio2 = &xfimdio1;
		xfi_pcs_mdio3 = &xfimdio2;
		xfi_pcs_mdio4 = &xfimdio3;
		emi1_rgmii = &t4240mdio0;
		emi1_slot1 = &t4240mdio1;
		emi1_slot2 = &t4240mdio2;
		emi1_slot3 = &t4240mdio3;
		emi1_slot4 = &t4240mdio4;
	};

	ifc: localbus@ffe124000 {
		reg = <0xf 0xfe124000 0 0x2000>;
		ranges = <0 0 0xf 0xe8000000 0x08000000
			  2 0 0xf 0xff800000 0x00010000
			  3 0 0xf 0xffdf0000 0x00008000>;

		nor@0,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "cfi-flash";
			reg = <0x0 0x0 0x8000000>;

			bank-width = <2>;
			device-width = <1>;
		};

		nand@2,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,ifc-nand";
			reg = <0x2 0x0 0x10000>;

			partition@0 {
				/* This location must not be altered  */
				/* 1MB for u-boot Bootloader Image */
				reg = <0x0 0x00100000>;
				label = "NAND U-Boot Image";
				read-only;
			};

			partition@100000 {
				/* 1MB for DTB Image */
				reg = <0x00100000 0x00100000>;
				label = "NAND DTB Image";
			};

			partition@200000 {
				/* 10MB for Linux Kernel Image */
				reg = <0x00200000 0x00A00000>;
				label = "NAND Linux Kernel Image";
			};

			partition@C00000 {
				/* 500MB for Root file System Image */
				reg = <0x00c00000 0x1F400000>;
				label = "NAND RFS Image";
			};
		};

		board-control@3,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,t4240qds-fpga", "fsl,fpga-qixis";
			reg = <3 0 0x300>;
			ranges = <0 3 0 0x300>;

			mdio-mux-emi1 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "mdio-mux-mmioreg", "mdio-mux";
				mdio-parent-bus = <&mdio1>;
				reg = <0x54 1>;
				mux-mask = <0xe0>;

				t4240mdio0: mdio@0 {
					#address-cells = <1>;
					#size-cells = <0>;
					reg = <0>;

					phyrgmii1: ethernet-phy@1 {
						reg = <0x1>;
					};

					phyrgmii2: ethernet-phy@2 {
						reg = <0x2>;
					};
				};

				t4240mdio1: mdio@20 {
					#address-cells = <1>;
					#size-cells = <0>;
					reg = <0x20>;
					status = "disabled";

					phy1: ethernet-phy@0 {
						reg = <0x0>;
					};

					phy2: ethernet-phy@1 {
						reg = <0x1>;
					};

					phy3: ethernet-phy@2 {
						reg = <0x2>;
					};

					phy4: ethernet-phy@3 {
						reg = <0x3>;
					};

					sgmiiphy11: ethernet-phy@1c {
						reg = <0x1c>;
					};

					sgmiiphy12: ethernet-phy@1d {
						reg = <0x1d>;
					};

					sgmiiphy13: ethernet-phy@1e {
						reg = <0x1e>;
					};

					sgmiiphy14: ethernet-phy@1f {
						reg = <0x1f>;
					};
				};

				t4240mdio2: mdio@40 {
					#address-cells = <1>;
					#size-cells = <0>;
					reg = <0x40>;
					status = "disabled";

					phy5: ethernet-phy@4 {
						reg = <0x4>;
					};

					phy6: ethernet-phy@5 {
						reg = <0x5>;
					};

					phy7: ethernet-phy@6 {
						reg = <0x6>;
					};

					phy8: ethernet-phy@7 {
						reg = <0x7>;
					};

					sgmiiphy21: ethernet-phy@1c {
						reg = <0x1c>;
					};

					sgmiiphy22: ethernet-phy@1d {
						reg = <0x1d>;
					};

					sgmiiphy23: ethernet-phy@1e {
						reg = <0x1e>;
					};

					sgmiiphy24: ethernet-phy@1f {
						reg = <0x1f>;
					};
				};

				t4240mdio3: mdio@60 {
					#address-cells = <1>;
					#size-cells = <0>;
					reg = <0x60>;
					status = "disabled";

					phy9: ethernet-phy@8 {
						reg = <0x8>;
					};

					phy10: ethernet-phy@9 {
						reg = <0x9>;
					};

					phy11: ethernet-phy@a {
						reg = <0xa>;
					};

					phy12: ethernet-phy@b {
						reg = <0xb>;
					};

					sgmiiphy31: ethernet-phy@1c {
						reg = <0x1c>;
					};

					sgmiiphy32: ethernet-phy@1d {
						reg = <0x1d>;
					};

					sgmiiphy33: ethernet-phy@1e {
						reg = <0x1e>;
					};

					sgmiiphy34: ethernet-phy@1f {
						reg = <0x1f>;
					};
				};

				t4240mdio4: mdio@80 {
					#address-cells = <1>;
					#size-cells = <0>;
					reg = <0x80>;
					status = "disabled";

					phy13: ethernet-phy@c {
						reg = <0xc>;
					};

					phy14: ethernet-phy@d {
						reg = <0xd>;
					};

					phy15: ethernet-phy@e {
						reg = <0xe>;
					};

					phy16: ethernet-phy@f {
						reg = <0xf>;
					};

					sgmiiphy41: ethernet-phy@1c {
						reg = <0x1c>;
					};

					sgmiiphy42: ethernet-phy@1d {
						reg = <0x1d>;
					};

					sgmiiphy43: ethernet-phy@1e {
						reg = <0x1e>;
					};

					sgmiiphy44: ethernet-phy@1f {
						reg = <0x1f>;
					};
				};
			};
		};
	};

	memory {
		device_type = "memory";
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		bman_fbpr: bman-fbpr {
			size = <0 0x1000000>;
			alignment = <0 0x1000000>;
		};
		qman_fqd: qman-fqd {
			size = <0 0x400000>;
			alignment = <0 0x400000>;
		};
		qman_pfdr: qman-pfdr {
			size = <0 0x2000000>;
			alignment = <0 0x2000000>;
		};
	};

	dcsr: dcsr@f00000000 {
		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
	};

	bportals: bman-portals@ff4000000 {
		ranges = <0x0 0xf 0xf4000000 0x2000000>;
	};

	qportals: qman-portals@ff6000000 {
		ranges = <0x0 0xf 0xf6000000 0x2000000>;
	};

	soc: soc@ffe000000 {
		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
		reg = <0xf 0xfe000000 0 0x00001000>;
		spi@110000 {
			flash@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "sst,sst25wf040", "jedec,spi-nor";
				reg = <0>;
				spi-max-frequency = <40000000>; /* input clock */
			};
		};

		i2c@118000 {
			mux@77 {
				compatible = "nxp,pca9547";
				reg = <0x77>;
				#address-cells = <1>;
				#size-cells = <0>;

				i2c@0 {
					#address-cells = <1>;
					#size-cells = <0>;
					reg = <0>;

					eeprom@51 {
						compatible = "atmel,24c256";
						reg = <0x51>;
					};
					eeprom@52 {
						compatible = "atmel,24c256";
						reg = <0x52>;
					};
					eeprom@53 {
						compatible = "atmel,24c256";
						reg = <0x53>;
					};
					eeprom@54 {
						compatible = "atmel,24c256";
						reg = <0x54>;
					};
					eeprom@55 {
						compatible = "atmel,24c256";
						reg = <0x55>;
					};
					eeprom@56 {
						compatible = "atmel,24c256";
						reg = <0x56>;
					};
					rtc@68 {
						compatible = "dallas,ds3232";
						reg = <0x68>;
						interrupts = <0x1 0x1 0 0>;
					};
				};

				i2c@2 {
					#address-cells = <1>;
					#size-cells = <0>;
					reg = <0x2>;

					ina220@40 {
						compatible = "ti,ina220";
						reg = <0x40>;
						shunt-resistor = <1000>;
					};

					ina220@41 {
						compatible = "ti,ina220";
						reg = <0x41>;
						shunt-resistor = <1000>;
					};

					ina220@44 {
						compatible = "ti,ina220";
						reg = <0x44>;
						shunt-resistor = <1000>;
					};

					ina220@45 {
						compatible = "ti,ina220";
						reg = <0x45>;
						shunt-resistor = <1000>;
					};

					ina220@46 {
						compatible = "ti,ina220";
						reg = <0x46>;
						shunt-resistor = <1000>;
					};

					ina220@47 {
						compatible = "ti,ina220";
						reg = <0x47>;
						shunt-resistor = <1000>;
					};
				};
			};
		};

		sdhc@114000 {
			voltage-ranges = <1800 1800 3300 3300>;
		};

		fman@400000 {
			port@83000 {
				status = "disabled";
			};

			port@84000 {
				status = "disabled";
			};

			port@85000 {
				status = "disabled";
			};

			port@86000 {
				status = "disabled";
			};

			port@87000 {
				status = "disabled";
			};

			ethernet@e0000 {
				phy-handle = <&phy5>;
				phy-connection-type = "sgmii";
			};

			ethernet@e2000 {
				phy-handle = <&phy6>;
				phy-connection-type = "sgmii";
			};

			ethernet@e4000 {
				phy-handle = <&phy7>;
				phy-connection-type = "sgmii";
			};

			ethernet@e6000 {
				phy-handle = <&phy8>;
				phy-connection-type = "sgmii";
			};

			ethernet@e8000 {
				phy-handle = <&phyrgmii2>;
				phy-connection-type = "rgmii";
			};

			ethernet@ea000 {
				phy-handle = <&phy2>;
				phy-connection-type = "sgmii";
			};

			ethernet@f0000 {
				phy-handle = <&xauiphy1>;
				phy-connection-type = "xgmii";
			};

			ethernet@f2000 {
				phy-handle = <&xauiphy2>;
				phy-connection-type = "xgmii";
			};

			xfimdio0: mdio@f1000 {
				status = "disabled";

				xfiphy1: ethernet-phy@0 {
					compatible = "ethernet-phy-ieee802.3-c45";
					reg = <0x0>;
				};
			};

			xfimdio1: mdio@f3000 {
				status = "disabled";

				xfiphy2: ethernet-phy@0 {
					compatible = "ethernet-phy-ieee802.3-c45";
					reg = <0x0>;
				};
			};
		};

		fman@500000 {
			port@84000 {
				status = "disabled";
			};

			port@85000 {
				status = "disabled";
			};

			port@86000 {
				status = "disabled";
			};

			port@87000 {
				status = "disabled";
			};

			ethernet@e0000 {
				phy-handle = <&phy13>;
				phy-connection-type = "sgmii";
			};

			ethernet@e2000 {
				phy-handle = <&phy14>;
				phy-connection-type = "sgmii";
			};

			ethernet@e4000 {
				phy-handle = <&phy15>;
				phy-connection-type = "sgmii";
			};

			ethernet@e6000 {
				phy-handle = <&phy16>;
				phy-connection-type = "sgmii";
			};

			ethernet@e8000 {
				phy-handle = <&phyrgmii1>;
				phy-connection-type = "rgmii";
			};

			ethernet@ea000 {
				phy-handle = <&phy10>;
				phy-connection-type = "sgmii";
			};

			ethernet@f0000 {
				phy-handle = <&xauiphy3>;
				phy-connection-type = "xgmii";
			};

			ethernet@f2000 {
				phy-handle = <&xauiphy4>;
				phy-connection-type = "xgmii";
			};

			xfimdio2: mdio@f1000 {
				status = "disabled";

				xfiphy3: ethernet-phy@0 {
					compatible = "ethernet-phy-ieee802.3-c45";
					reg = <0x0>;
				};
			};

			xfimdio3: mdio@f3000 {
				status = "disabled";

				xfiphy4: ethernet-phy@0 {
					compatible = "ethernet-phy-ieee802.3-c45";
					reg = <0x0>;
				};
			};

			mdio@fd000 {
				xauiphy1: ethernet-phy@0 {
					compatible = "ethernet-phy-ieee802.3-c45";
					reg = <0x0>;
				};

				xauiphy2: ethernet-phy@1 {
					compatible = "ethernet-phy-ieee802.3-c45";
					reg = <0x1>;
				};

				xauiphy3: ethernet-phy@2 {
					compatible = "ethernet-phy-ieee802.3-c45";
					reg = <0x2>;
				};

				xauiphy4: ethernet-phy@3 {
					compatible = "ethernet-phy-ieee802.3-c45";
					reg = <0x3>;
				};
			};
		};
	};

	pci0: pcie@ffe240000 {
		reg = <0xf 0xfe240000 0 0x10000>;
		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
		pcie@0 {
			ranges = <0x02000000 0 0xe0000000
				  0x02000000 0 0xe0000000
				  0 0x20000000

				  0x01000000 0 0x00000000
				  0x01000000 0 0x00000000
				  0 0x00010000>;
		};
	};

	pci1: pcie@ffe250000 {
		reg = <0xf 0xfe250000 0 0x10000>;
		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
		pcie@0 {
			ranges = <0x02000000 0 0xe0000000
				  0x02000000 0 0xe0000000
				  0 0x20000000

				  0x01000000 0 0x00000000
				  0x01000000 0 0x00000000
				  0 0x00010000>;
		};
	};

	pci2: pcie@ffe260000 {
		reg = <0xf 0xfe260000 0 0x1000>;
		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
		pcie@0 {
			ranges = <0x02000000 0 0xe0000000
				  0x02000000 0 0xe0000000
				  0 0x20000000

				  0x01000000 0 0x00000000
				  0x01000000 0 0x00000000
				  0 0x00010000>;
		};
	};

	pci3: pcie@ffe270000 {
		reg = <0xf 0xfe270000 0 0x10000>;
		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
		pcie@0 {
			ranges = <0x02000000 0 0xe0000000
				  0x02000000 0 0xe0000000
				  0 0x20000000

				  0x01000000 0 0x00000000
				  0x01000000 0 0x00000000
				  0 0x00010000>;
		};
	};
	rio: rapidio@ffe0c0000 {
		reg = <0xf 0xfe0c0000 0 0x11000>;

		port1 {
			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
		};
		port2 {
			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
		};
	};
};

/include/ "t4240si-post.dtsi"