xref: /OK3568_Linux_fs/kernel/arch/powerpc/boot/dts/fsl/p4080ds.dts (revision 4882a59341e53eb6f0b4789bf948001014eff981)

/*
 * P4080DS Device Tree Source
 *
 * Copyright 2009 - 2015 Freescale Semiconductor Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in the
 *       documentation and/or other materials provided with the distribution.
 *     * Neither the name of Freescale Semiconductor nor the
 *       names of its contributors may be used to endorse or promote products
 *       derived from this software without specific prior written permission.
 *
 *
 * ALTERNATIVELY, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") as published by the Free Software
 * Foundation, either version 2 of that License or (at your option) any
 * later version.
 *
 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/include/ "p4080si-pre.dtsi"

/ {
	model = "fsl,P4080DS";
	compatible = "fsl,P4080DS";
	#address-cells = <2>;
	#size-cells = <2>;
	interrupt-parent = <&mpic>;

	aliases {
		phy_rgmii = &phyrgmii;
		phy5_slot3 = &phy5slot3;
		phy6_slot3 = &phy6slot3;
		phy7_slot3 = &phy7slot3;
		phy8_slot3 = &phy8slot3;
		emi1_slot3 = &p4080mdio2;
		emi1_slot4 = &p4080mdio1;
		emi1_slot5 = &p4080mdio3;
		emi1_rgmii = &p4080mdio0;
		emi2_slot4 = &p4080xmdio1;
		emi2_slot5 = &p4080xmdio3;
	};

	memory {
		device_type = "memory";
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		bman_fbpr: bman-fbpr {
			size = <0 0x1000000>;
			alignment = <0 0x1000000>;
		};
		qman_fqd: qman-fqd {
			size = <0 0x400000>;
			alignment = <0 0x400000>;
		};
		qman_pfdr: qman-pfdr {
			size = <0 0x2000000>;
			alignment = <0 0x2000000>;
		};
	};

	dcsr: dcsr@f00000000 {
		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
	};

	bportals: bman-portals@ff4000000 {
		ranges = <0x0 0xf 0xf4000000 0x200000>;
	};

	qportals: qman-portals@ff4200000 {
		ranges = <0x0 0xf 0xf4200000 0x200000>;
	};

	soc: soc@ffe000000 {
		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
		reg = <0xf 0xfe000000 0 0x00001000>;

		spi@110000 {
			flash@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "spansion,s25sl12801", "jedec,spi-nor";
				reg = <0>;
				spi-max-frequency = <40000000>; /* input clock */
				partition@u-boot {
					label = "u-boot";
					reg = <0x00000000 0x00100000>;
					read-only;
				};
				partition@kernel {
					label = "kernel";
					reg = <0x00100000 0x00500000>;
					read-only;
				};
				partition@dtb {
					label = "dtb";
					reg = <0x00600000 0x00100000>;
					read-only;
				};
				partition@fs {
					label = "file system";
					reg = <0x00700000 0x00900000>;
				};
			};
		};

		i2c@118100 {
			eeprom@51 {
				compatible = "atmel,spd";
				reg = <0x51>;
			};
			eeprom@52 {
				compatible = "atmel,spd";
				reg = <0x52>;
			};
			rtc@68 {
				compatible = "dallas,ds3232";
				reg = <0x68>;
				interrupts = <0x1 0x1 0 0>;
			};
			adt7461@4c {
				compatible = "adi,adt7461";
				reg = <0x4c>;
			};
		};

		i2c@118000 {
			zl2006@21 {
				compatible = "zl2006";
				reg = <0x21>;
			};
			zl2006@22 {
				compatible = "zl2006";
				reg = <0x22>;
			};
			zl2006@23 {
				compatible = "zl2006";
				reg = <0x23>;
			};
			zl2006@24 {
				compatible = "zl2006";
				reg = <0x24>;
			};
			eeprom@50 {
				compatible = "atmel,24c64";
				reg = <0x50>;
			};
			eeprom@55 {
				compatible = "atmel,24c64";
				reg = <0x55>;
			};
			eeprom@56 {
				compatible = "atmel,24c64";
				reg = <0x56>;
			};
			eeprom@57 {
				compatible = "atmel,24c02";
				reg = <0x57>;
			};
		};

		i2c@119100 {
			/* 0x6E: ICS9FG108 */
		};

		usb0: usb@210000 {
			phy_type = "ulpi";
		};

		usb1: usb@211000 {
			dr_mode = "host";
			phy_type = "ulpi";
		};

		fman@400000 {
			ethernet@e0000 {
				phy-handle = <&phy0>;
				phy-connection-type = "sgmii";
			};

			ethernet@e2000 {
				phy-handle = <&phy1>;
				phy-connection-type = "sgmii";
			};

			ethernet@e4000 {
				phy-handle = <&phy2>;
				phy-connection-type = "sgmii";
			};

			ethernet@e6000 {
				phy-handle = <&phy3>;
				phy-connection-type = "sgmii";
			};

			ethernet@f0000 {
				phy-handle = <&phy10>;
				phy-connection-type = "xgmii";
			};
		};

		fman@500000 {
			ethernet@e0000 {
				phy-handle = <&phy5>;
				phy-connection-type = "sgmii";
			};

			ethernet@e2000 {
				phy-handle = <&phy6>;
				phy-connection-type = "sgmii";
			};

			ethernet@e4000 {
				phy-handle = <&phy7>;
				phy-connection-type = "sgmii";
			};

			ethernet@e6000 {
				phy-handle = <&phy8>;
				phy-connection-type = "sgmii";
			};

			ethernet@f0000 {
				phy-handle = <&phy11>;
				phy-connection-type = "xgmii";
			};
		};
	};

	rio: rapidio@ffe0c0000 {
		reg = <0xf 0xfe0c0000 0 0x11000>;

		port1 {
			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
		};
		port2 {
			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
		};
	};

	lbc: localbus@ffe124000 {
		reg = <0xf 0xfe124000 0 0x1000>;
		ranges = <0 0 0xf 0xe8000000 0x08000000
			  3 0 0xf 0xffdf0000 0x00008000>;

		flash@0,0 {
			compatible = "cfi-flash";
			reg = <0 0 0x08000000>;
			bank-width = <2>;
			device-width = <2>;
		};

		board-control@3,0 {
			compatible = "fsl,p4080ds-fpga", "fsl,fpga-ngpixis";
			reg = <3 0 0x30>;
		};
	};

	pci0: pcie@ffe200000 {
		reg = <0xf 0xfe200000 0 0x1000>;
		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
		pcie@0 {
			ranges = <0x02000000 0 0xe0000000
				  0x02000000 0 0xe0000000
				  0 0x20000000

				  0x01000000 0 0x00000000
				  0x01000000 0 0x00000000
				  0 0x00010000>;
		};
	};

	pci1: pcie@ffe201000 {
		reg = <0xf 0xfe201000 0 0x1000>;
		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
		pcie@0 {
			ranges = <0x02000000 0 0xe0000000
				  0x02000000 0 0xe0000000
				  0 0x20000000

				  0x01000000 0 0x00000000
				  0x01000000 0 0x00000000
				  0 0x00010000>;
		};
	};

	pci2: pcie@ffe202000 {
		reg = <0xf 0xfe202000 0 0x1000>;
		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
		pcie@0 {
			ranges = <0x02000000 0 0xe0000000
				  0x02000000 0 0xe0000000
				  0 0x20000000

				  0x01000000 0 0x00000000
				  0x01000000 0 0x00000000
				  0 0x00010000>;
		};
	};

	mdio-mux-emi1 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "mdio-mux-gpio", "mdio-mux";
		mdio-parent-bus = <&mdio0>;
		gpios = <&gpio0 1 0>, <&gpio0 0 0>;

		p4080mdio0: mdio@0 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0>;

			phyrgmii: ethernet-phy@0 {
				reg = <0x0>;
			};
		};

		p4080mdio1: mdio@1 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <1>;

			phy5: ethernet-phy@1c {
				reg = <0x1c>;
			};

			phy6: ethernet-phy@1d {
				reg = <0x1d>;
			};

			phy7: ethernet-phy@1e {
				reg = <0x1e>;
			};

			phy8: ethernet-phy@1f {
				reg = <0x1f>;
			};
		};

		p4080mdio2: mdio@2 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <2>;
			status = "disabled";

			phy5slot3: ethernet-phy@1c {
				reg = <0x1c>;
			};

			phy6slot3: ethernet-phy@1d {
				reg = <0x1d>;
			};

			phy7slot3: ethernet-phy@1e {
				reg = <0x1e>;
			};

			phy8slot3: ethernet-phy@1f {
				reg = <0x1f>;
			};
		};

		p4080mdio3: mdio@3 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <3>;

			phy0: ethernet-phy@1c {
				reg = <0x1c>;
			};

			phy1: ethernet-phy@1d {
				reg = <0x1d>;
			};

			phy2: ethernet-phy@1e {
				reg = <0x1e>;
			};

			phy3: ethernet-phy@1f {
				reg = <0x1f>;
			};
		};
	};

	mdio-mux-emi2 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "mdio-mux-gpio", "mdio-mux";
		mdio-parent-bus = <&xmdio0>;
		gpios = <&gpio0 3 0>, <&gpio0 2 0>;

		p4080xmdio1: mdio@1 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <1>;

			phy11: ethernet-phy@0 {
				compatible = "ethernet-phy-ieee802.3-c45";
				reg = <0x0>;
			};
		};

		p4080xmdio3: mdio@3 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <3>;

			phy10: ethernet-phy@4 {
				compatible = "ethernet-phy-ieee802.3-c45";
				reg = <0x4>;
			};
		};
	};
};

/include/ "p4080si-post.dtsi"