xref: /OK3568_Linux_fs/kernel/arch/arm64/boot/dts/rockchip/rk3568-evb5-ddr4-v10.dtsi (revision 4882a59341e53eb6f0b4789bf948001014eff981)

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
 *
 */

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include "rk3568.dtsi"
#include "rk3568-evb.dtsi"

/ {
	model = "Rockchip RK3568 EVB5 DDR4 V10 Board";
	compatible = "rockchip,rk3568-evb5-ddr4-v10", "rockchip,rk3568";

	rk_headset: rk-headset {
		compatible = "rockchip_headset";
		headset_gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&hp_det>;
	};

	vcc2v5_sys: vcc2v5-ddr {
		compatible = "regulator-fixed";
		regulator-name = "vcc2v5-sys";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <2500000>;
		regulator-max-microvolt = <2500000>;
		vin-supply = <&vcc3v3_sys>;
	};

	pcie30_avdd0v9: pcie30-avdd0v9 {
		compatible = "regulator-fixed";
		regulator-name = "pcie30_avdd0v9";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <900000>;
		regulator-max-microvolt = <900000>;
		vin-supply = <&vcc3v3_sys>;
	};

	pcie30_avdd1v8: pcie30-avdd1v8 {
		compatible = "regulator-fixed";
		regulator-name = "pcie30_avdd1v8";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		vin-supply = <&vcc3v3_sys>;
	};

	vcc3v3_pcie: gpio-regulator {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_pcie";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
		startup-delay-us = <5000>;
		vin-supply = <&dc_12v>;
	};

	vcc3v3_bu: vcc3v3-bu {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_bu";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&vcc5v0_sys>;
	};

	vcc_camera: vcc-camera-regulator {
		compatible = "regulator-fixed";
		gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&camera_pwr>;
		regulator-name = "vcc_camera";
		enable-active-high;
		regulator-always-on;
		regulator-boot-on;
	};
};

&bt_sound {
	status = "disabled";
	simple-audio-card,cpu {
		sound-dai = <&i2s2_2ch>;
	};
};

&combphy0_us {
	status = "okay";
};

&combphy1_usq {
	rockchip,sgmii-mac-sel = <0>;
	status = "okay";
};

&combphy2_psq {
	status = "okay";
};

&csi2_dphy_hw {
	status = "okay";
};

&csi2_dphy0 {
	status = "okay";

	ports {
		#address-cells = <1>;
		#size-cells = <0>;
		port@0 {
			reg = <0>;
			#address-cells = <1>;
			#size-cells = <0>;

			mipi_in_ucam0: endpoint@1 {
				reg = <1>;
				remote-endpoint = <&ucam_out0>;
				data-lanes = <1 2 3 4>;
			};
			mipi_in_ucam1: endpoint@2 {
				reg = <2>;
				remote-endpoint = <&gc8034_out>;
				data-lanes = <1 2 3 4>;
			};
			mipi_in_ucam2: endpoint@3 {
				reg = <3>;
				remote-endpoint = <&ov5695_out>;
				data-lanes = <1 2>;
			};
		};
		port@1 {
			reg = <1>;
			#address-cells = <1>;
			#size-cells = <0>;

			csidphy_out: endpoint@0 {
				reg = <0>;
				remote-endpoint = <&isp0_in>;
			};
		};
	};
};

/*
 * video_phy0 needs to be enabled
 * when dsi0 is enabled
 */
&dsi0 {
	status = "okay";
};

&dsi0_in_vp0 {
	status = "disabled";
};

&dsi0_in_vp1 {
	status = "okay";
};

&dsi0_panel {
	power-supply = <&vcc3v3_lcd0_n>;
};

/*
 * video_phy1 needs to be enabled
 * when dsi1 is enabled
 */
&dsi1 {
	status = "disabled";
};

&dsi1_in_vp0 {
	status = "disabled";
};

&dsi1_in_vp1 {
	status = "disabled";
};

&dsi1_panel {
	power-supply = <&vcc3v3_lcd1_n>;
};

&edp {
	hpd-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
	status = "okay";
};

&edp_phy {
	status = "okay";
};

&edp_in_vp0 {
	status = "okay";
};

&edp_in_vp1 {
	status = "disabled";
};

&gmac0 {
	phy-mode = "sgmii";

	rockchip,pipegrf = <&pipegrf>;
	rockchip,xpcs = <&xpcs>;

	snps,reset-gpio = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>;
	snps,reset-active-low;
	/* Reset time is 20ms, 100ms for rtl8211f */
	snps,reset-delays-us = <0 20000 100000>;

	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>;
	assigned-clock-parents = <&gmac0_xpcsclk>;

	pinctrl-names = "default";
	pinctrl-0 = <&gmac0_miim>;

	power-domains = <&power RK3568_PD_PIPE>;
	phys = <&combphy1_usq PHY_TYPE_SGMII>;
	phy-handle = <&sgmii_phy>;

	status = "okay";
};

&gmac1 {
	phy-mode = "rgmii";
	clock_in_out = "output";

	snps,reset-gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
	snps,reset-active-low;
	/* Reset time is 20ms, 100ms for rtl8211f */
	snps,reset-delays-us = <0 20000 100000>;

	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
	assigned-clock-rates = <0>, <125000000>;

	pinctrl-names = "default";
	pinctrl-0 = <&gmac1m1_miim
		     &gmac1m1_tx_bus2_level3
		     &gmac1m1_rx_bus2
		     &gmac1m1_rgmii_clk_level2
		     &gmac1m1_rgmii_bus_level3>;

	tx_delay = <0x46>;
	rx_delay = <0x2f>;

	phy-handle = <&rgmii_phy1>;
	status = "okay";
};

/*
 * power-supply should switche to vcc3v3_lcd1_n
 * when mipi panel is connected to dsi1.
 */
&gt1x {
	power-supply = <&vcc3v3_lcd0_n>;
};

&i2c3 {
	clock-frequency = <400000>;
	status = "okay";

	sii9022: sii9022@39 {
		compatible = "sil,sii9022";
		reg = <0x39>;
		pinctrl-names = "default";
		pinctrl-0 = <&sii902x_hdmi_int>;
		interrupt-parent = <&gpio4>;
		interrupts = <RK_PD2 IRQ_TYPE_LEVEL_HIGH>;
		reset-gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_LOW>;
		enable-gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
		bus-format = <0>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;

				sii9022_in_rgb: endpoint {
					remote-endpoint = <&rgb_out_sii9022>;
				};
			};
		};
	};
};

&i2c4 {
	status = "okay";
	gc8034: gc8034@37 {
		compatible = "galaxycore,gc8034";
		status = "okay";
		reg = <0x37>;
		clocks = <&cru CLK_CIF_OUT>;
		clock-names = "xvclk";
		pinctrl-names = "default";
		pinctrl-0 = <&cif_clk>;
		reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
		pwdn-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_LOW>;
		rockchip,grf = <&grf>;
		rockchip,camera-module-index = <0>;
		rockchip,camera-module-facing = "back";
		rockchip,camera-module-name = "RK-CMK-8M-2-v1";
		rockchip,camera-module-lens-name = "CK8401";
		port {
			gc8034_out: endpoint {
				remote-endpoint = <&mipi_in_ucam1>;
				data-lanes = <1 2 3 4>;
			};
		};
	};
	os04a10: os04a10@36 {
		compatible = "ovti,os04a10";
		reg = <0x36>;
		clocks = <&cru CLK_CIF_OUT>;
		clock-names = "xvclk";
		power-domains = <&power RK3568_PD_VI>;
		pinctrl-names = "default";
		pinctrl-0 = <&cif_clk>;
		reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
		pwdn-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
		rockchip,camera-module-index = <0>;
		rockchip,camera-module-facing = "back";
		rockchip,camera-module-name = "CMK-OT1607-FV1";
		rockchip,camera-module-lens-name = "M12-40IRC-4MP-F16";
		port {
			ucam_out0: endpoint {
				remote-endpoint = <&mipi_in_ucam0>;
				data-lanes = <1 2 3 4>;
			};
		};
	};
	ov5695: ov5695@36 {
		status = "okay";
		compatible = "ovti,ov5695";
		reg = <0x36>;
		clocks = <&cru CLK_CIF_OUT>;
		clock-names = "xvclk";
		power-domains = <&power RK3568_PD_VI>;
		pinctrl-names = "default";
		pinctrl-0 = <&cif_clk>;
		reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>;
		pwdn-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
		rockchip,camera-module-index = <0>;
		rockchip,camera-module-facing = "back";
		rockchip,camera-module-name = "TongJu";
		rockchip,camera-module-lens-name = "CHT842-MD";
		port {
			ov5695_out: endpoint {
				remote-endpoint = <&mipi_in_ucam2>;
				data-lanes = <1 2>;
			};
		};
	};
};

&i2c5 {
	status = "disabled";
};

&i2s2_2ch {
	pinctrl-0 = <&i2s2m0_sclktx &i2s2m0_lrcktx &i2s2m0_sdi &i2s2m0_sdo>;
	rockchip,bclk-fs = <32>;
	status = "disabled";
};

&mdio0 {
	sgmii_phy: phy@1 {
		compatible = "ethernet-phy-ieee802.3-c22";
		reg = <0x1>;
	};
};

&mdio1 {
	rgmii_phy1: phy@0 {
		compatible = "ethernet-phy-ieee802.3-c22";
		reg = <0x0>;
	};
};

&video_phy0 {
	status = "okay";
};

&video_phy1 {
	status = "disabled";
};

&pcie30phy {
	status = "okay";
};

&pcie3x2 {
	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
	vpcie3v3-supply = <&vcc3v3_pcie>;
	status = "okay";
};

&pinctrl {
	cam {
		camera_pwr: camera-pwr {
			rockchip,pins =
				/* camera power en */
				<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};
	headphone {
		hp_det: hp-det {
			rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
		};
	};

	sii902x {
		sii902x_hdmi_int: sii902x-hdmi-int {
			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	wireless-wlan {
		wifi_host_wake_irq: wifi-host-wake-irq {
			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
		};
	};

	wireless-bluetooth {
		uart8_gpios: uart8-gpios {
			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};
};

&rgb {
	status = "okay";

	ports {
		port@1 {
			reg = <1>;
			#address-cells = <1>;
			#size-cells = <0>;

			rgb_out_sii9022: endpoint@0 {
				reg = <0>;
				remote-endpoint = <&sii9022_in_rgb>;
			};
		};
	};
};

&rgb_in_vp2 {
	status = "okay";
};

&rkisp {
	status = "okay";
};

&rkisp_mmu {
	status = "okay";
};

&rkisp_vir0 {
	status = "okay";

	port {
		#address-cells = <1>;
		#size-cells = <0>;

		isp0_in: endpoint@0 {
			reg = <0>;
			remote-endpoint = <&csidphy_out>;
		};
	};
};

&route_dsi0 {
	status = "okay";
	connect = <&vp1_out_dsi0>;
};

&sata2 {
	status = "okay";
};

&sdmmc2 {
	max-frequency = <150000000>;
	no-sd;
	no-mmc;
	bus-width = <4>;
	disable-wp;
	cap-sd-highspeed;
	cap-sdio-irq;
	keep-power-in-suspend;
	mmc-pwrseq = <&sdio_pwrseq>;
	non-removable;
	pinctrl-names = "default";
	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
	sd-uhs-sdr104;
	status = "okay";
};

&spdif_8ch {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&spdifm1_tx>;
};

&uart8 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn>;
};

&vcc3v3_lcd0_n {
	gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
	enable-active-high;
};

&vcc3v3_lcd1_n {
	gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
	enable-active-high;
};

&wireless_wlan {
	pinctrl-names = "default";
	pinctrl-0 = <&wifi_host_wake_irq>;
	WIFI,host_wake_irq = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
};

&wireless_bluetooth {
	compatible = "bluetooth-platdata";
	clocks = <&rk809 1>;
	clock-names = "ext_clock";
	//wifi-bt-power-toggle;
	uart_rts_gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
	pinctrl-names = "default", "rts_gpio";
	pinctrl-0 = <&uart8m0_rtsn>;
	pinctrl-1 = <&uart8_gpios>;
	BT,reset_gpio    = <&gpio3 RK_PA0 GPIO_ACTIVE_HIGH>;
	BT,wake_gpio     = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
	BT,wake_host_irq = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
	status = "okay";
};