xref: /OK3568_Linux_fs/kernel/arch/arm64/boot/dts/qcom/sdm630.dtsi (revision 4882a59341e53eb6f0b4789bf948001014eff981)

// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2020, Konrad Dybcio
 */

#include <dt-bindings/clock/qcom,gcc-sdm660.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>

/ {
	interrupt-parent = <&intc>;

	#address-cells = <2>;
	#size-cells = <2>;

	chosen { };

	clocks {
		xo_board: xo-board {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <19200000>;
			clock-output-names = "xo_board";
		};

		sleep_clk: sleep-clk {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <32764>;
			clock-output-names = "sleep_clk";
		};
	};

	cpus {
		#address-cells = <2>;
		#size-cells = <0>;

		CPU0: cpu@100 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x0 0x100>;
			enable-method = "psci";
			cpu-idle-states = <&PERF_CPU_SLEEP_0
						&PERF_CPU_SLEEP_1
						&PERF_CLUSTER_SLEEP_0
						&PERF_CLUSTER_SLEEP_1
						&PERF_CLUSTER_SLEEP_2>;
			capacity-dmips-mhz = <1126>;
			#cooling-cells = <2>;
			next-level-cache = <&L2_1>;
			L2_1: l2-cache {
				compatible = "cache";
				cache-level = <2>;
			};
		};

		CPU1: cpu@101 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x0 0x101>;
			enable-method = "psci";
			cpu-idle-states = <&PERF_CPU_SLEEP_0
						&PERF_CPU_SLEEP_1
						&PERF_CLUSTER_SLEEP_0
						&PERF_CLUSTER_SLEEP_1
						&PERF_CLUSTER_SLEEP_2>;
			capacity-dmips-mhz = <1126>;
			#cooling-cells = <2>;
			next-level-cache = <&L2_1>;
		};

		CPU2: cpu@102 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x0 0x102>;
			enable-method = "psci";
			cpu-idle-states = <&PERF_CPU_SLEEP_0
						&PERF_CPU_SLEEP_1
						&PERF_CLUSTER_SLEEP_0
						&PERF_CLUSTER_SLEEP_1
						&PERF_CLUSTER_SLEEP_2>;
			capacity-dmips-mhz = <1126>;
			#cooling-cells = <2>;
			next-level-cache = <&L2_1>;
		};

		CPU3: cpu@103 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x0 0x103>;
			enable-method = "psci";
			cpu-idle-states = <&PERF_CPU_SLEEP_0
						&PERF_CPU_SLEEP_1
						&PERF_CLUSTER_SLEEP_0
						&PERF_CLUSTER_SLEEP_1
						&PERF_CLUSTER_SLEEP_2>;
			capacity-dmips-mhz = <1126>;
			#cooling-cells = <2>;
			next-level-cache = <&L2_1>;
		};

		CPU4: cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x0 0x0>;
			enable-method = "psci";
			cpu-idle-states = <&PWR_CPU_SLEEP_0
						&PWR_CPU_SLEEP_1
						&PWR_CLUSTER_SLEEP_0
						&PWR_CLUSTER_SLEEP_1
						&PWR_CLUSTER_SLEEP_2>;
			capacity-dmips-mhz = <1024>;
			#cooling-cells = <2>;
			next-level-cache = <&L2_0>;
			L2_0: l2-cache {
				compatible = "cache";
				cache-level = <2>;
			};
		};

		CPU5: cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x0 0x1>;
			enable-method = "psci";
			cpu-idle-states = <&PWR_CPU_SLEEP_0
						&PWR_CPU_SLEEP_1
						&PWR_CLUSTER_SLEEP_0
						&PWR_CLUSTER_SLEEP_1
						&PWR_CLUSTER_SLEEP_2>;
			capacity-dmips-mhz = <1024>;
			#cooling-cells = <2>;
			next-level-cache = <&L2_0>;
		};

		CPU6: cpu@2 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x0 0x2>;
			enable-method = "psci";
			cpu-idle-states = <&PWR_CPU_SLEEP_0
						&PWR_CPU_SLEEP_1
						&PWR_CLUSTER_SLEEP_0
						&PWR_CLUSTER_SLEEP_1
						&PWR_CLUSTER_SLEEP_2>;
			capacity-dmips-mhz = <1024>;
			#cooling-cells = <2>;
			next-level-cache = <&L2_0>;
		};

		CPU7: cpu@3 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x0 0x3>;
			enable-method = "psci";
			cpu-idle-states = <&PWR_CPU_SLEEP_0
						&PWR_CPU_SLEEP_1
						&PWR_CLUSTER_SLEEP_0
						&PWR_CLUSTER_SLEEP_1
						&PWR_CLUSTER_SLEEP_2>;
			capacity-dmips-mhz = <1024>;
			#cooling-cells = <2>;
			next-level-cache = <&L2_0>;
		};

		cpu-map {
			cluster0 {
				core0 {
					cpu = <&CPU4>;
				};

				core1 {
					cpu = <&CPU5>;
				};

				core2 {
					cpu = <&CPU6>;
				};

				core3 {
					cpu = <&CPU7>;
				};
			};

			cluster1 {
				core0 {
					cpu = <&CPU0>;
				};

				core1 {
					cpu = <&CPU1>;
				};

				core2 {
					cpu = <&CPU2>;
				};

				core3 {
					cpu = <&CPU3>;
				};
			};
		};

		idle-states {
			entry-method = "psci";

			PWR_CPU_SLEEP_0: cpu-sleep-0-0 {
				compatible = "arm,idle-state";
				idle-state-name = "pwr-retention";
				arm,psci-suspend-param = <0x40000002>;
				entry-latency-us = <338>;
				exit-latency-us = <423>;
				min-residency-us = <200>;
			};

			PWR_CPU_SLEEP_1: cpu-sleep-0-1 {
				compatible = "arm,idle-state";
				idle-state-name = "pwr-power-collapse";
				arm,psci-suspend-param = <0x40000003>;
				entry-latency-us = <515>;
				exit-latency-us = <1821>;
				min-residency-us = <1000>;
				local-timer-stop;
			};

			PERF_CPU_SLEEP_0: cpu-sleep-1-0 {
				compatible = "arm,idle-state";
				idle-state-name = "perf-retention";
				arm,psci-suspend-param = <0x40000002>;
				entry-latency-us = <154>;
				exit-latency-us = <87>;
				min-residency-us = <200>;
			};

			PERF_CPU_SLEEP_1: cpu-sleep-1-1 {
				compatible = "arm,idle-state";
				idle-state-name = "perf-power-collapse";
				arm,psci-suspend-param = <0x40000003>;
				entry-latency-us = <262>;
				exit-latency-us = <301>;
				min-residency-us = <1000>;
				local-timer-stop;
			};

			PWR_CLUSTER_SLEEP_0: cluster-sleep-0-0 {
				compatible = "arm,idle-state";
				idle-state-name = "pwr-cluster-dynamic-retention";
				arm,psci-suspend-param = <0x400000F2>;
				entry-latency-us = <284>;
				exit-latency-us = <384>;
				min-residency-us = <9987>;
				local-timer-stop;
			};

			PWR_CLUSTER_SLEEP_1: cluster-sleep-0-1 {
				compatible = "arm,idle-state";
				idle-state-name = "pwr-cluster-retention";
				arm,psci-suspend-param = <0x400000F3>;
				entry-latency-us = <338>;
				exit-latency-us = <423>;
				min-residency-us = <9987>;
				local-timer-stop;
			};

			PWR_CLUSTER_SLEEP_2: cluster-sleep-0-2 {
				compatible = "arm,idle-state";
				idle-state-name = "pwr-cluster-retention";
				arm,psci-suspend-param = <0x400000F4>;
				entry-latency-us = <515>;
				exit-latency-us = <1821>;
				min-residency-us = <9987>;
				local-timer-stop;
			};

			PERF_CLUSTER_SLEEP_0: cluster-sleep-1-0 {
				compatible = "arm,idle-state";
				idle-state-name = "perf-cluster-dynamic-retention";
				arm,psci-suspend-param = <0x400000F2>;
				entry-latency-us = <272>;
				exit-latency-us = <329>;
				min-residency-us = <9987>;
				local-timer-stop;
			};

			PERF_CLUSTER_SLEEP_1: cluster-sleep-1-1 {
				compatible = "arm,idle-state";
				idle-state-name = "perf-cluster-retention";
				arm,psci-suspend-param = <0x400000F3>;
				entry-latency-us = <332>;
				exit-latency-us = <368>;
				min-residency-us = <9987>;
				local-timer-stop;
			};

			PERF_CLUSTER_SLEEP_2: cluster-sleep-1-2 {
				compatible = "arm,idle-state";
				idle-state-name = "perf-cluster-retention";
				arm,psci-suspend-param = <0x400000F4>;
				entry-latency-us = <545>;
				exit-latency-us = <1609>;
				min-residency-us = <9987>;
				local-timer-stop;
			};
		};
	};

	firmware {
		scm {
			compatible = "qcom,scm-msm8998", "qcom,scm";
		};
	};

	memory {
		device_type = "memory";
		/* We expect the bootloader to fill in the reg */
		reg = <0 0 0 0>;
	};

	pmu {
		compatible = "arm,armv8-pmuv3";
		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
	};

	psci {
		compatible = "arm,psci-1.0";
		method = "smc";
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		wlan_msa_guard: wlan-msa-guard@85600000 {
			reg = <0x0 0x85600000 0x0 0x100000>;
			no-map;
		};

		wlan_msa_mem: wlan-msa-mem@85700000 {
			reg = <0x0 0x85700000 0x0 0x100000>;
			no-map;
		};

		qhee_code: qhee-code@85800000 {
			reg = <0x0 0x85800000 0x0 0x600000>;
			no-map;
		};

		rmtfs_mem: memory@85e00000 {
			compatible = "qcom,rmtfs-mem";
			reg = <0x0 0x85e00000 0x0 0x200000>;
			no-map;

			qcom,client-id = <1>;
			qcom,vmid = <15>;
		};

		smem_region: smem-mem@86000000 {
			reg = <0 0x86000000 0 0x200000>;
			no-map;
		};

		tz_mem: memory@86200000 {
			reg = <0x0 0x86200000 0x0 0x3300000>;
			no-map;
		};

		mpss_region: mpss@8ac00000 {
			reg = <0x0 0x8ac00000 0x0 0x7e00000>;
			no-map;
		};

		adsp_region: adsp@92a00000 {
			reg = <0x0 0x92a00000 0x0 0x1e00000>;
			no-map;
		};

		mba_region: mba@94800000 {
			reg = <0x0 0x94800000 0x0 0x200000>;
			no-map;
		};

		buffer_mem: tzbuffer@94a00000 {
			reg = <0x0 0x94a00000 0x0 0x100000>;
			no-map;
		};

		venus_region: venus@9f800000 {
			reg = <0x0 0x9f800000 0x0 0x800000>;
			no-map;
		};

		adsp_mem: adsp-region@f6000000 {
			reg = <0x0 0xf6000000 0x0 0x800000>;
			no-map;
		};

		qseecom_mem: qseecom-region@f6800000 {
			reg = <0x0 0xf6800000 0x0 0x1400000>;
			no-map;
		};

		zap_shader_region: gpu@fed00000 {
			compatible = "shared-dma-pool";
			reg = <0x0 0xfed00000 0x0 0xa00000>;
			no-map;
		};
	};

	rpm-glink {
		compatible = "qcom,glink-rpm";

		interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
		qcom,rpm-msg-ram = <&rpm_msg_ram>;
		mboxes = <&apcs_glb 0>;

		rpm_requests: rpm-requests {
			compatible = "qcom,rpm-sdm660";
			qcom,glink-channels = "rpm_requests";

			rpmcc: clock-controller {
				compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc";
				#clock-cells = <1>;
			};
		};
	};

	smem: smem {
		compatible = "qcom,smem";
		memory-region = <&smem_region>;
		hwlocks = <&tcsr_mutex 3>;
	};

	soc {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0 0 0 0xffffffff>;
		compatible = "simple-bus";

		gcc: clock-controller@100000 {
			compatible = "qcom,gcc-sdm630";
			#clock-cells = <1>;
			#reset-cells = <1>;
			#power-domain-cells = <1>;
			reg = <0x00100000 0x94000>;

			clock-names = "xo", "sleep_clk";
			clocks = <&xo_board>,
					<&sleep_clk>;
		};

		rpm_msg_ram: memory@778000 {
			compatible = "qcom,rpm-msg-ram";
			reg = <0x00778000 0x7000>;
		};

		qfprom: qfprom@780000 {
			compatible = "qcom,qfprom";
			reg = <0x00780000 0x621c>;
			#address-cells = <1>;
			#size-cells = <1>;
		};

		rng: rng@793000 {
			compatible = "qcom,prng-ee";
			reg = <0x00793000 0x1000>;
			clocks = <&gcc GCC_PRNG_AHB_CLK>;
			clock-names = "core";
		};

		restart@10ac000 {
			compatible = "qcom,pshold";
			reg = <0x010ac000 0x4>;
		};

		anoc2_smmu: iommu@16c0000 {
			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
			reg = <0x016c0000 0x40000>;
			#iommu-cells = <1>;

			#global-interrupts = <2>;
			interrupts =
				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,

				<GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 374 IRQ_TYPE_LEVEL_LOW>,
				<GIC_SPI 375 IRQ_TYPE_LEVEL_LOW>,
				<GIC_SPI 376 IRQ_TYPE_LEVEL_LOW>,
				<GIC_SPI 377 IRQ_TYPE_LEVEL_LOW>,
				<GIC_SPI 378 IRQ_TYPE_LEVEL_LOW>,
				<GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;

			status = "disabled";
		};

		tcsr_mutex_regs: syscon@1f40000 {
			compatible = "syscon";
			reg = <0x01f40000 0x20000>;
		};

		tlmm: pinctrl@3100000 {
			compatible = "qcom,sdm630-pinctrl";
			reg = <0x03100000 0x400000>,
				  <0x03500000 0x400000>,
				  <0x03900000 0x400000>;
			reg-names = "south", "center", "north";
			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			gpio-ranges = <&tlmm 0 0 114>;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;

			blsp1_uart1_default: blsp1-uart1-default {
				pins = "gpio0", "gpio1", "gpio2", "gpio3";
				drive-strength = <2>;
				bias-disable;
			};

			blsp1_uart1_sleep: blsp1-uart1-sleep {
				pins = "gpio0", "gpio1", "gpio2", "gpio3";
				drive-strength = <2>;
				bias-disable;
			};

			blsp1_uart2_default: blsp1-uart2-default {
				pins = "gpio4", "gpio5";
				drive-strength = <2>;
				bias-disable;
			};

			blsp2_uart1_default: blsp2-uart1-active {
				tx-rts {
					pins = "gpio16", "gpio19";
					function = "blsp_uart5";
					drive-strength = <2>;
					bias-disable;
				};

				rx {
					/*
					 * Avoid garbage data while BT module
					 * is powered off or not driving signal
					 */
					pins = "gpio17";
					function = "blsp_uart5";
					drive-strength = <2>;
					bias-pull-up;
				};

				cts {
					/* Match the pull of the BT module */
					pins = "gpio18";
					function = "blsp_uart5";
					drive-strength = <2>;
					bias-pull-down;
				};
			};

			blsp2_uart1_sleep: blsp2-uart1-sleep {
				tx {
					pins = "gpio16";
					function = "gpio";
					drive-strength = <2>;
					bias-pull-up;
				};

				rx-cts-rts {
					pins = "gpio17", "gpio18", "gpio19";
					function = "gpio";
					drive-strength = <2>;
					bias-no-pull;
				};
			};

			i2c1_default: i2c1-default {
				pins = "gpio2", "gpio3";
				drive-strength = <2>;
				bias-disable;
			};

			i2c1_sleep: i2c1-sleep {
				pins = "gpio2", "gpio3";
				drive-strength = <2>;
				bias-pull-up;
			};

			i2c2_default: i2c2-default {
				pins = "gpio6", "gpio7";
				drive-strength = <2>;
				bias-disable;
			};

			i2c2_sleep: i2c2-sleep {
				pins = "gpio6", "gpio7";
				drive-strength = <2>;
				bias-pull-up;
			};

			i2c3_default: i2c3-default {
				pins = "gpio10", "gpio11";
				drive-strength = <2>;
				bias-disable;
			};

			i2c3_sleep: i2c3-sleep {
				pins = "gpio10", "gpio11";
				drive-strength = <2>;
				bias-pull-up;
			};

			i2c4_default: i2c4-default {
				pins = "gpio14", "gpio15";
				drive-strength = <2>;
				bias-disable;
			};

			i2c4_sleep: i2c4-sleep {
				pins = "gpio14", "gpio15";
				drive-strength = <2>;
				bias-pull-up;
			};

			i2c5_default: i2c5-default {
				pins = "gpio18", "gpio19";
				drive-strength = <2>;
				bias-disable;
			};

			i2c5_sleep: i2c5-sleep {
				pins = "gpio18", "gpio19";
				drive-strength = <2>;
				bias-pull-up;
			};

			i2c6_default: i2c6-default {
				pins = "gpio22", "gpio23";
				drive-strength = <2>;
				bias-disable;
			};

			i2c6_sleep: i2c6-sleep {
				pins = "gpio22", "gpio23";
				drive-strength = <2>;
				bias-pull-up;
			};

			i2c7_default: i2c7-default {
				pins = "gpio26", "gpio27";
				drive-strength = <2>;
				bias-disable;
			};

			i2c7_sleep: i2c7-sleep {
				pins = "gpio26", "gpio27";
				drive-strength = <2>;
				bias-pull-up;
			};

			i2c8_default: i2c8-default {
				pins = "gpio30", "gpio31";
				drive-strength = <2>;
				bias-disable;
			};

			i2c8_sleep: i2c8-sleep {
				pins = "gpio30", "gpio31";
				drive-strength = <2>;
				bias-pull-up;
			};

			sdc1_state_on: sdc1-on {
				clk {
					pins = "sdc1_clk";
					bias-disable;
					drive-strength = <16>;
				};

				cmd {
					pins = "sdc1_cmd";
					bias-pull-up;
					drive-strength = <10>;
				};

				data {
					pins = "sdc1_data";
					bias-pull-up;
					drive-strength = <10>;
				};

				rclk {
					pins = "sdc1_rclk";
					bias-pull-down;
				};
			};

			sdc1_state_off: sdc1-off {
				clk {
					pins = "sdc1_clk";
					bias-disable;
					drive-strength = <2>;
				};

				cmd {
					pins = "sdc1_cmd";
					bias-pull-up;
					drive-strength = <2>;
				};

				data {
					pins = "sdc1_data";
					bias-pull-up;
					drive-strength = <2>;
				};

				rclk {
					pins = "sdc1_rclk";
					bias-pull-down;
				};
			};

			sdc2_state_on: sdc2-on {
				clk {
					pins = "sdc2_clk";
					bias-disable;
					drive-strength = <16>;
				};

				cmd {
					pins = "sdc2_cmd";
					bias-pull-up;
					drive-strength = <10>;
				};

				data {
					pins = "sdc2_data";
					bias-pull-up;
					drive-strength = <10>;
				};

				sd-cd {
					pins = "gpio54";
					bias-pull-up;
					drive-strength = <2>;
				};
			};

			sdc2_state_off: sdc2-off {
				clk {
					pins = "sdc2_clk";
					bias-disable;
					drive-strength = <2>;
				};

				cmd {
					pins = "sdc2_cmd";
					bias-pull-up;
					drive-strength = <2>;
				};

				data {
					pins = "sdc2_data";
					bias-pull-up;
					drive-strength = <2>;
				};

				sd-cd {
					pins = "gpio54";
					bias-disable;
					drive-strength = <2>;
				};
			};
		};

		kgsl_smmu: iommu@5040000 {
			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
			reg = <0x05040000 0x10000>;
			#iommu-cells = <1>;

			#global-interrupts = <2>;
			interrupts =
				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,

				<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>;

			status = "disabled";
		};

		lpass_smmu: iommu@5100000 {
			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
			reg = <0x05100000 0x40000>;
			#iommu-cells = <1>;

			#global-interrupts = <2>;
			interrupts =
				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,

				<GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;

			status = "disabled";
		};

		spmi_bus: spmi@800f000 {
			compatible = "qcom,spmi-pmic-arb";
			reg =	<0x0800f000 0x1000>,
				<0x08400000 0x1000000>,
				<0x09400000 0x1000000>,
				<0x0a400000 0x220000>,
				<0x0800a000 0x3000>;
			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
			interrupt-names = "periph_irq";
			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
			qcom,ee = <0>;
			qcom,channel = <0>;
			#address-cells = <2>;
			#size-cells = <0>;
			interrupt-controller;
			#interrupt-cells = <4>;
			cell-index = <0>;
		};

		sdhc_1: sdhci@c0c4000 {
			compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5";
			reg = <0x0c0c4000 0x1000>,
				<0x0c0c5000 0x1000>;
			reg-names = "hc", "cqhci";

			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "hc_irq", "pwr_irq";

			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
					<&gcc GCC_SDCC1_AHB_CLK>,
					<&xo_board>;
			clock-names = "core", "iface", "xo";

			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&sdc1_state_on>;
			pinctrl-1 = <&sdc1_state_off>;

			bus-width = <8>;
			non-removable;

			status = "disabled";
		};

		blsp1_dma: dma@c144000 {
			compatible = "qcom,bam-v1.7.0";
			reg = <0x0c144000 0x1f000>;
			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "bam_clk";
			#dma-cells = <1>;
			qcom,ee = <0>;
			qcom,controlled-remotely;
			num-channels = <18>;
			qcom,num-ees = <4>;
		};

		blsp1_uart1: serial@c16f000 {
			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
			reg = <0x0c16f000 0x200>;
			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
			dma-names = "tx", "rx";
			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&blsp1_uart1_default>;
			pinctrl-1 = <&blsp1_uart1_sleep>;
			status = "disabled";
		};

		blsp1_uart2: serial@c170000 {
			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
			reg = <0x0c170000 0x1000>;
			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
			dma-names = "tx", "rx";
			pinctrl-names = "default";
			pinctrl-0 = <&blsp1_uart2_default>;
			status = "disabled";
		};

		blsp_i2c1: i2c@c175000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x0c175000 0x600>;
			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
					<&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			clock-frequency = <400000>;

			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&i2c1_default>;
			pinctrl-1 = <&i2c1_sleep>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp_i2c2: i2c@c176000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x0c176000 0x600>;
			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			clock-frequency = <400000>;

			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&i2c2_default>;
			pinctrl-1 = <&i2c2_sleep>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp_i2c3: i2c@c177000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x0c177000 0x600>;
			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			clock-frequency = <400000>;

			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&i2c3_default>;
			pinctrl-1 = <&i2c3_sleep>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp_i2c4: i2c@c178000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x0c178000 0x600>;
			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			clock-frequency = <400000>;

			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&i2c4_default>;
			pinctrl-1 = <&i2c4_sleep>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp2_dma: dma@c184000 {
			compatible = "qcom,bam-v1.7.0";
			reg = <0x0c184000 0x1f000>;
			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
			clock-names = "bam_clk";
			#dma-cells = <1>;
			qcom,ee = <0>;
			qcom,controlled-remotely;
			num-channels = <18>;
			qcom,num-ees = <4>;
		};

		blsp2_uart1: serial@c1af000 {
			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
			reg = <0x0c1af000 0x200>;
			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>,
				 <&gcc GCC_BLSP2_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
			dma-names = "tx", "rx";
			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&blsp2_uart1_default>;
			pinctrl-1 = <&blsp2_uart1_sleep>;
			status = "disabled";
		};

		blsp_i2c5: i2c@c1b5000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x0c1b5000 0x600>;
			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
				 <&gcc GCC_BLSP2_AHB_CLK>;
			clock-names = "core", "iface";
			clock-frequency = <400000>;

			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&i2c5_default>;
			pinctrl-1 = <&i2c5_sleep>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp_i2c6: i2c@c1b6000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x0c1b6000 0x600>;
			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
				 <&gcc GCC_BLSP2_AHB_CLK>;
			clock-names = "core", "iface";
			clock-frequency = <400000>;

			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&i2c6_default>;
			pinctrl-1 = <&i2c6_sleep>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp_i2c7: i2c@c1b7000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x0c1b7000 0x600>;
			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
				 <&gcc GCC_BLSP2_AHB_CLK>;
			clock-names = "core", "iface";
			clock-frequency = <400000>;

			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&i2c7_default>;
			pinctrl-1 = <&i2c7_sleep>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp_i2c8: i2c@c1b8000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x0c1b8000 0x600>;
			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
				 <&gcc GCC_BLSP2_AHB_CLK>;
			clock-names = "core", "iface";
			clock-frequency = <400000>;

			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&i2c8_default>;
			pinctrl-1 = <&i2c8_sleep>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		mmss_smmu: iommu@cd00000 {
			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
			reg = <0x0cd00000 0x40000>;
			#iommu-cells = <1>;

			#global-interrupts = <2>;
			interrupts =
				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,

				<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;

			status = "disabled";
		};

		apcs_glb: mailbox@17911000 {
			compatible = "qcom,sdm660-apcs-hmss-global";
			reg = <0x17911000 0x1000>;

			#mbox-cells = <1>;
		};

		timer@17920000 {
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;
			compatible = "arm,armv7-timer-mem";
			reg = <0x17920000 0x1000>;
			clock-frequency = <19200000>;

			frame@17921000 {
				frame-number = <0>;
				interrupts = <0 8 0x4>,
						<0 7 0x4>;
				reg = <0x17921000 0x1000>,
					<0x17922000 0x1000>;
			};

			frame@17923000 {
				frame-number = <1>;
				interrupts = <0 9 0x4>;
				reg = <0x17923000 0x1000>;
				status = "disabled";
			};

			frame@17924000 {
				frame-number = <2>;
				interrupts = <0 10 0x4>;
				reg = <0x17924000 0x1000>;
				status = "disabled";
			};

			frame@17925000 {
				frame-number = <3>;
				interrupts = <0 11 0x4>;
				reg = <0x17925000 0x1000>;
				status = "disabled";
			};

			frame@17926000 {
				frame-number = <4>;
				interrupts = <0 12 0x4>;
				reg = <0x17926000 0x1000>;
				status = "disabled";
			};

			frame@17927000 {
				frame-number = <5>;
				interrupts = <0 13 0x4>;
				reg = <0x17927000 0x1000>;
				status = "disabled";
			};

			frame@17928000 {
				frame-number = <6>;
				interrupts = <0 14 0x4>;
				reg = <0x17928000 0x1000>;
				status = "disabled";
			};
		};

		intc: interrupt-controller@17a00000 {
			compatible = "arm,gic-v3";
			reg = <0x17a00000 0x10000>,	   /* GICD */
				  <0x17b00000 0x100000>;	  /* GICR * 8 */
			#interrupt-cells = <3>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;
			interrupt-controller;
			#redistributor-regions = <1>;
			redistributor-stride = <0x0 0x20000>;
			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
		};
	};

	tcsr_mutex: hwlock {
		compatible = "qcom,tcsr-mutex";
		syscon = <&tcsr_mutex_regs 0 0x1000>;
		#hwlock-cells = <1>;
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <GIC_PPI 1 0xf08>,
				 <GIC_PPI 2 0xf08>,
				 <GIC_PPI 3 0xf08>,
				 <GIC_PPI 0 0xf08>;
	};
};