xref: /OK3568_Linux_fs/kernel/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi (revision 4882a59341e53eb6f0b4789bf948001014eff981)

/*
 *  BSD LICENSE
 *
 *  Copyright(c) 2016-2017 Broadcom.  All rights reserved.
 *
 *  Redistribution and use in source and binary forms, with or without
 *  modification, are permitted provided that the following conditions
 *  are met:
 *
 *    * Redistributions of source code must retain the above copyright
 *      notice, this list of conditions and the following disclaimer.
 *    * Redistributions in binary form must reproduce the above copyright
 *      notice, this list of conditions and the following disclaimer in
 *      the documentation and/or other materials provided with the
 *      distribution.
 *    * Neither the name of Broadcom nor the names of its
 *      contributors may be used to endorse or promote products derived
 *      from this software without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

	fs4: fs4 {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0x0 0x0 0x67000000 0x00800000>;

		crypto_mbox: crypto_mbox@0 {
			compatible = "brcm,iproc-flexrm-mbox";
			reg = <0x00000000 0x200000>;
			msi-parent = <&gic_its 0x4100>;
			#mbox-cells = <3>;
			dma-coherent;
		};

		raid_mbox: raid_mbox@400000 {
			compatible = "brcm,iproc-flexrm-mbox";
			reg = <0x00400000 0x200000>;
			dma-coherent;
			msi-parent = <&gic_its 0x4300>;
			#mbox-cells = <3>;
		};

		raid0: raid@0 {
			compatible = "brcm,iproc-sba-v2";
			mboxes = <&raid_mbox 0 0x1 0xff00>,
				 <&raid_mbox 1 0x1 0xff00>,
				 <&raid_mbox 2 0x1 0xff00>,
				 <&raid_mbox 3 0x1 0xff00>;
		};

		raid1: raid@1 {
			compatible = "brcm,iproc-sba-v2";
			mboxes = <&raid_mbox 4 0x1 0xff00>,
				 <&raid_mbox 5 0x1 0xff00>,
				 <&raid_mbox 6 0x1 0xff00>,
				 <&raid_mbox 7 0x1 0xff00>;
		};

		raid2: raid@2 {
			compatible = "brcm,iproc-sba-v2";
			mboxes = <&raid_mbox 8 0x1 0xff00>,
				 <&raid_mbox 9 0x1 0xff00>,
				 <&raid_mbox 10 0x1 0xff00>,
				 <&raid_mbox 11 0x1 0xff00>;
		};

		raid3: raid@3 {
			compatible = "brcm,iproc-sba-v2";
			mboxes = <&raid_mbox 12 0x1 0xff00>,
				 <&raid_mbox 13 0x1 0xff00>,
				 <&raid_mbox 14 0x1 0xff00>,
				 <&raid_mbox 15 0x1 0xff00>;
		};

		raid4: raid@4 {
			compatible = "brcm,iproc-sba-v2";
			mboxes = <&raid_mbox 16 0x1 0xff00>,
				 <&raid_mbox 17 0x1 0xff00>,
				 <&raid_mbox 18 0x1 0xff00>,
				 <&raid_mbox 19 0x1 0xff00>;
		};

		raid5: raid@5 {
			compatible = "brcm,iproc-sba-v2";
			mboxes = <&raid_mbox 20 0x1 0xff00>,
				 <&raid_mbox 21 0x1 0xff00>,
				 <&raid_mbox 22 0x1 0xff00>,
				 <&raid_mbox 23 0x1 0xff00>;
		};

		raid6: raid@6 {
			compatible = "brcm,iproc-sba-v2";
			mboxes = <&raid_mbox 24 0x1 0xff00>,
				 <&raid_mbox 25 0x1 0xff00>,
				 <&raid_mbox 26 0x1 0xff00>,
				 <&raid_mbox 27 0x1 0xff00>;
		};

		raid7: raid@7 {
			compatible = "brcm,iproc-sba-v2";
			mboxes = <&raid_mbox 28 0x1 0xff00>,
				 <&raid_mbox 29 0x1 0xff00>,
				 <&raid_mbox 30 0x1 0xff00>,
				 <&raid_mbox 31 0x1 0xff00>;
		};
	};