xref: /OK3568_Linux_fs/kernel/arch/arm/boot/dts/qcom-msm8660.dtsi (revision 4882a59341e53eb6f0b4789bf948001014eff981)

// SPDX-License-Identifier: GPL-2.0
/dts-v1/;

#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8660.h>
#include <dt-bindings/soc/qcom,gsbi.h>

/ {
	#address-cells = <1>;
	#size-cells = <1>;
	model = "Qualcomm MSM8660";
	compatible = "qcom,msm8660";
	interrupt-parent = <&intc>;

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu@0 {
			compatible = "qcom,scorpion";
			enable-method = "qcom,gcc-msm8660";
			device_type = "cpu";
			reg = <0>;
			next-level-cache = <&L2>;
		};

		cpu@1 {
			compatible = "qcom,scorpion";
			enable-method = "qcom,gcc-msm8660";
			device_type = "cpu";
			reg = <1>;
			next-level-cache = <&L2>;
		};

		L2: l2-cache {
			compatible = "cache";
			cache-level = <2>;
		};
	};

	memory {
		device_type = "memory";
		reg = <0x0 0x0>;
	};

	cpu-pmu {
		compatible = "qcom,scorpion-mp-pmu";
		interrupts = <1 9 0x304>;
	};

	clocks {
		cxo_board {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <19200000>;
		};

		pxo_board {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <27000000>;
		};

		sleep_clk {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <32768>;
		};
	};

	/*
	 * These channels from the ADC are simply hardware monitors.
	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
	 * ADC.
	 */
	iio-hwmon {
		compatible = "iio-hwmon";
		io-channels = <&xoadc 0x00 0x01>, /* Battery */
			    <&xoadc 0x00 0x02>, /* DC in (charger) */
			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
			    <&xoadc 0x00 0x0b>, /* Die temperature */
			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
			    <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
	};

	soc: soc {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;
		compatible = "simple-bus";

		intc: interrupt-controller@2080000 {
			compatible = "qcom,msm-8660-qgic";
			interrupt-controller;
			#interrupt-cells = <3>;
			reg = < 0x02080000 0x1000 >,
			      < 0x02081000 0x1000 >;
		};

		timer@2000000 {
			compatible = "qcom,scss-timer", "qcom,msm-timer";
			interrupts = <1 0 0x301>,
				     <1 1 0x301>,
				     <1 2 0x301>;
			reg = <0x02000000 0x100>;
			clock-frequency = <27000000>,
					  <32768>;
			cpu-offset = <0x40000>;
		};

		tlmm: pinctrl@800000 {
			compatible = "qcom,msm8660-pinctrl";
			reg = <0x800000 0x4000>;

			gpio-controller;
			gpio-ranges = <&tlmm 0 0 173>;
			#gpio-cells = <2>;
			interrupts = <0 16 0x4>;
			interrupt-controller;
			#interrupt-cells = <2>;

		};

		gcc: clock-controller@900000 {
			compatible = "qcom,gcc-msm8660";
			#clock-cells = <1>;
			#reset-cells = <1>;
			reg = <0x900000 0x4000>;
		};

		gsbi6: gsbi@16500000 {
			compatible = "qcom,gsbi-v1.0.0";
			cell-index = <12>;
			reg = <0x16500000 0x100>;
			clocks = <&gcc GSBI6_H_CLK>;
			clock-names = "iface";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;
			status = "disabled";

			syscon-tcsr = <&tcsr>;

			gsbi6_serial: serial@16540000 {
				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
				reg = <0x16540000 0x1000>,
				      <0x16500000 0x1000>;
				interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
				clock-names = "core", "iface";
				status = "disabled";
			};

			gsbi6_i2c: i2c@16580000 {
				compatible = "qcom,i2c-qup-v1.1.1";
				reg = <0x16580000 0x1000>;
				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
				clock-names = "core", "iface";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};
		};

		gsbi7: gsbi@16600000 {
			compatible = "qcom,gsbi-v1.0.0";
			cell-index = <12>;
			reg = <0x16600000 0x100>;
			clocks = <&gcc GSBI7_H_CLK>;
			clock-names = "iface";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;
			status = "disabled";

			syscon-tcsr = <&tcsr>;

			gsbi7_serial: serial@16640000 {
				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
				reg = <0x16640000 0x1000>,
				      <0x16600000 0x1000>;
				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
				clock-names = "core", "iface";
				status = "disabled";
			};

			gsbi7_i2c: i2c@16680000 {
				compatible = "qcom,i2c-qup-v1.1.1";
				reg = <0x16680000 0x1000>;
				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
				clock-names = "core", "iface";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};
		};

		gsbi8: gsbi@19800000 {
			compatible = "qcom,gsbi-v1.0.0";
			cell-index = <12>;
			reg = <0x19800000 0x100>;
			clocks = <&gcc GSBI8_H_CLK>;
			clock-names = "iface";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;

			syscon-tcsr = <&tcsr>;

			gsbi8_i2c: i2c@19880000 {
				compatible = "qcom,i2c-qup-v1.1.1";
				reg = <0x19880000 0x1000>;
				interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&gcc GSBI8_QUP_CLK>, <&gcc GSBI8_H_CLK>;
				clock-names = "core", "iface";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};
		};

		gsbi12: gsbi@19c00000 {
			compatible = "qcom,gsbi-v1.0.0";
			cell-index = <12>;
			reg = <0x19c00000 0x100>;
			clocks = <&gcc GSBI12_H_CLK>;
			clock-names = "iface";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;

			syscon-tcsr = <&tcsr>;

			gsbi12_serial: serial@19c40000 {
				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
				reg = <0x19c40000 0x1000>,
				      <0x19c00000 0x1000>;
				interrupts = <0 195 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
				clock-names = "core", "iface";
				status = "disabled";
			};

			gsbi12_i2c: i2c@19c80000 {
				compatible = "qcom,i2c-qup-v1.1.1";
				reg = <0x19c80000 0x1000>;
				interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>;
				clock-names = "core", "iface";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};
		};

		external-bus@1a100000 {
			compatible = "qcom,msm8660-ebi2";
			#address-cells = <2>;
			#size-cells = <1>;
			ranges = <0 0x0 0x1a800000 0x00800000>,
				 <1 0x0 0x1b000000 0x00800000>,
				 <2 0x0 0x1b800000 0x00800000>,
				 <3 0x0 0x1d000000 0x08000000>,
				 <4 0x0 0x1c800000 0x00800000>,
				 <5 0x0 0x1c000000 0x00800000>;
			reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>;
			reg-names = "ebi2", "xmem";
			clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>;
			clock-names = "ebi2x", "ebi2";
			status = "disabled";
		};

		qcom,ssbi@500000 {
			compatible = "qcom,ssbi";
			reg = <0x500000 0x1000>;
			qcom,controller-type = "pmic-arbiter";

			pm8058: pmic@0 {
				compatible = "qcom,pm8058";
				interrupt-parent = <&tlmm>;
				interrupts = <88 8>;
				#interrupt-cells = <2>;
				interrupt-controller;
				#address-cells = <1>;
				#size-cells = <0>;

				pm8058_gpio: gpio@150 {
					compatible = "qcom,pm8058-gpio",
						     "qcom,ssbi-gpio";
					reg = <0x150>;
					interrupt-controller;
					#interrupt-cells = <2>;
					gpio-controller;
					gpio-ranges = <&pm8058_gpio 0 0 44>;
					#gpio-cells = <2>;

				};

				pm8058_mpps: mpps@50 {
					compatible = "qcom,pm8058-mpp",
						     "qcom,ssbi-mpp";
					reg = <0x50>;
					gpio-controller;
					#gpio-cells = <2>;
					interrupt-parent = <&pm8058>;
					interrupts =
					<128 IRQ_TYPE_NONE>,
					<129 IRQ_TYPE_NONE>,
					<130 IRQ_TYPE_NONE>,
					<131 IRQ_TYPE_NONE>,
					<132 IRQ_TYPE_NONE>,
					<133 IRQ_TYPE_NONE>,
					<134 IRQ_TYPE_NONE>,
					<135 IRQ_TYPE_NONE>,
					<136 IRQ_TYPE_NONE>,
					<137 IRQ_TYPE_NONE>,
					<138 IRQ_TYPE_NONE>,
					<139 IRQ_TYPE_NONE>;
				};

				pwrkey@1c {
					compatible = "qcom,pm8058-pwrkey";
					reg = <0x1c>;
					interrupt-parent = <&pm8058>;
					interrupts = <50 1>, <51 1>;
					debounce = <15625>;
					pull-up;
				};

				keypad@148 {
					compatible = "qcom,pm8058-keypad";
					reg = <0x148>;
					interrupt-parent = <&pm8058>;
					interrupts = <74 1>, <75 1>;
					debounce = <15>;
					scan-delay = <32>;
					row-hold = <91500>;
				};

				xoadc: xoadc@197 {
					compatible = "qcom,pm8058-adc";
					reg = <0x197>;
					interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
					#address-cells = <2>;
					#size-cells = <0>;
					#io-channel-cells = <2>;

					vcoin: adc-channel@0 {
						reg = <0x00 0x00>;
					};
					vbat: adc-channel@1 {
						reg = <0x00 0x01>;
					};
					dcin: adc-channel@2 {
						reg = <0x00 0x02>;
					};
					ichg: adc-channel@3 {
						reg = <0x00 0x03>;
					};
					vph_pwr: adc-channel@4 {
						reg = <0x00 0x04>;
					};
					usb_vbus: adc-channel@a {
						reg = <0x00 0x0a>;
					};
					die_temp: adc-channel@b {
						reg = <0x00 0x0b>;
					};
					ref_625mv: adc-channel@c {
						reg = <0x00 0x0c>;
					};
					ref_1250mv: adc-channel@d {
						reg = <0x00 0x0d>;
					};
					ref_325mv: adc-channel@e {
						reg = <0x00 0x0e>;
					};
					ref_muxoff: adc-channel@f {
						reg = <0x00 0x0f>;
					};
				};

				rtc@1e8 {
					compatible = "qcom,pm8058-rtc";
					reg = <0x1e8>;
					interrupt-parent = <&pm8058>;
					interrupts = <39 1>;
					allow-set-time;
				};

				vibrator@4a {
					compatible = "qcom,pm8058-vib";
					reg = <0x4a>;
				};
			};
		};

		l2cc: clock-controller@2082000 {
			compatible	= "syscon";
			reg		= <0x02082000 0x1000>;
		};

		rpm: rpm@104000 {
			compatible	= "qcom,rpm-msm8660";
			reg		= <0x00104000 0x1000>;
			qcom,ipc	= <&l2cc 0x8 2>;

			interrupts	= <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
					  <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
					  <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
			interrupt-names	= "ack", "err", "wakeup";
			clocks = <&gcc RPM_MSG_RAM_H_CLK>;
			clock-names = "ram";

			rpmcc: clock-controller {
				compatible	= "qcom,rpmcc-msm8660", "qcom,rpmcc";
				#clock-cells = <1>;
			};

			pm8901-regulators {
				compatible = "qcom,rpm-pm8901-regulators";

				pm8901_l0: l0 {};
				pm8901_l1: l1 {};
				pm8901_l2: l2 {};
				pm8901_l3: l3 {};
				pm8901_l4: l4 {};
				pm8901_l5: l5 {};
				pm8901_l6: l6 {};

				/* S0 and S1 Handled as SAW regulators by SPM */
				pm8901_s2: s2 {};
				pm8901_s3: s3 {};
				pm8901_s4: s4 {};

				pm8901_lvs0: lvs0 {};
				pm8901_lvs1: lvs1 {};
				pm8901_lvs2: lvs2 {};
				pm8901_lvs3: lvs3 {};

				pm8901_mvs: mvs {};
			};

			pm8058-regulators {
				compatible = "qcom,rpm-pm8058-regulators";

				pm8058_l0: l0 {};
				pm8058_l1: l1 {};
				pm8058_l2: l2 {};
				pm8058_l3: l3 {};
				pm8058_l4: l4 {};
				pm8058_l5: l5 {};
				pm8058_l6: l6 {};
				pm8058_l7: l7 {};
				pm8058_l8: l8 {};
				pm8058_l9: l9 {};
				pm8058_l10: l10 {};
				pm8058_l11: l11 {};
				pm8058_l12: l12 {};
				pm8058_l13: l13 {};
				pm8058_l14: l14 {};
				pm8058_l15: l15 {};
				pm8058_l16: l16 {};
				pm8058_l17: l17 {};
				pm8058_l18: l18 {};
				pm8058_l19: l19 {};
				pm8058_l20: l20 {};
				pm8058_l21: l21 {};
				pm8058_l22: l22 {};
				pm8058_l23: l23 {};
				pm8058_l24: l24 {};
				pm8058_l25: l25 {};

				pm8058_s0: s0 {};
				pm8058_s1: s1 {};
				pm8058_s2: s2 {};
				pm8058_s3: s3 {};
				pm8058_s4: s4 {};

				pm8058_lvs0: lvs0 {};
				pm8058_lvs1: lvs1 {};

				pm8058_ncp: ncp {};
			};
		};

		amba {
			compatible = "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;
			sdcc1: sdcc@12400000 {
				status		= "disabled";
				compatible	= "arm,pl18x", "arm,primecell";
				arm,primecell-periphid = <0x00051180>;
				reg		= <0x12400000 0x8000>;
				interrupts	= <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-names	= "cmd_irq";
				clocks		= <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
				clock-names	= "mclk", "apb_pclk";
				bus-width	= <8>;
				max-frequency	= <48000000>;
				non-removable;
				cap-sd-highspeed;
				cap-mmc-highspeed;
			};

			sdcc2: sdcc@12140000 {
				status		= "disabled";
				compatible	= "arm,pl18x", "arm,primecell";
				arm,primecell-periphid = <0x00051180>;
				reg		= <0x12140000 0x8000>;
				interrupts	= <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-names	= "cmd_irq";
				clocks		= <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
				clock-names	= "mclk", "apb_pclk";
				bus-width	= <8>;
				max-frequency	= <48000000>;
				cap-sd-highspeed;
				cap-mmc-highspeed;
			};

			sdcc3: sdcc@12180000 {
				compatible	= "arm,pl18x", "arm,primecell";
				arm,primecell-periphid = <0x00051180>;
				status		= "disabled";
				reg		= <0x12180000 0x8000>;
				interrupts	= <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-names	= "cmd_irq";
				clocks		= <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
				clock-names	= "mclk", "apb_pclk";
				bus-width	= <4>;
				cap-sd-highspeed;
				cap-mmc-highspeed;
				max-frequency	= <48000000>;
				no-1-8-v;
			};

			sdcc4: sdcc@121c0000 {
				compatible	= "arm,pl18x", "arm,primecell";
				arm,primecell-periphid = <0x00051180>;
				status		= "disabled";
				reg		= <0x121c0000 0x8000>;
				interrupts	= <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-names	= "cmd_irq";
				clocks		= <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
				clock-names	= "mclk", "apb_pclk";
				bus-width	= <4>;
				max-frequency	= <48000000>;
				cap-sd-highspeed;
				cap-mmc-highspeed;
			};

			sdcc5: sdcc@12200000 {
				compatible	= "arm,pl18x", "arm,primecell";
				arm,primecell-periphid = <0x00051180>;
				status		= "disabled";
				reg		= <0x12200000 0x8000>;
				interrupts	= <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-names	= "cmd_irq";
				clocks		= <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
				clock-names	= "mclk", "apb_pclk";
				bus-width	= <4>;
				cap-sd-highspeed;
				cap-mmc-highspeed;
				max-frequency	= <48000000>;
			};
		};

		tcsr: syscon@1a400000 {
			compatible = "qcom,tcsr-msm8660", "syscon";
			reg = <0x1a400000 0x100>;
		};
	};

};