1*4882a593SmuzhiyunFreescale i.MX audio complex with S/PDIF transceiver 2*4882a593Smuzhiyun 3*4882a593SmuzhiyunRequired properties: 4*4882a593Smuzhiyun 5*4882a593Smuzhiyun - compatible : "fsl,imx-audio-spdif" 6*4882a593Smuzhiyun 7*4882a593Smuzhiyun - model : The user-visible name of this sound complex 8*4882a593Smuzhiyun 9*4882a593Smuzhiyun - spdif-controller : The phandle of the i.MX S/PDIF controller 10*4882a593Smuzhiyun 11*4882a593Smuzhiyun 12*4882a593SmuzhiyunOptional properties: 13*4882a593Smuzhiyun 14*4882a593Smuzhiyun - spdif-out : This is a boolean property. If present, the 15*4882a593Smuzhiyun transmitting function of S/PDIF will be enabled, 16*4882a593Smuzhiyun indicating there's a physical S/PDIF out connector 17*4882a593Smuzhiyun or jack on the board or it's connecting to some 18*4882a593Smuzhiyun other IP block, such as an HDMI encoder or 19*4882a593Smuzhiyun display-controller. 20*4882a593Smuzhiyun 21*4882a593Smuzhiyun - spdif-in : This is a boolean property. If present, the receiving 22*4882a593Smuzhiyun function of S/PDIF will be enabled, indicating there 23*4882a593Smuzhiyun is a physical S/PDIF in connector/jack on the board. 24*4882a593Smuzhiyun 25*4882a593Smuzhiyun* Note: At least one of these two properties should be set in the DT binding. 26*4882a593Smuzhiyun 27*4882a593Smuzhiyun 28*4882a593SmuzhiyunExample: 29*4882a593Smuzhiyun 30*4882a593Smuzhiyunsound-spdif { 31*4882a593Smuzhiyun compatible = "fsl,imx-audio-spdif"; 32*4882a593Smuzhiyun model = "imx-spdif"; 33*4882a593Smuzhiyun spdif-controller = <&spdif>; 34*4882a593Smuzhiyun spdif-out; 35*4882a593Smuzhiyun spdif-in; 36*4882a593Smuzhiyun}; 37