xref: /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt (revision 4882a59341e53eb6f0b4789bf948001014eff981)
1*4882a593Smuzhiyun* Freescale LINFlexD UART
2*4882a593Smuzhiyun
3*4882a593SmuzhiyunThe LINFlexD controller implements several LIN protocol versions, as well as
4*4882a593Smuzhiyunsupport for full-duplex UART communication through 8-bit and 9-bit frames.
5*4882a593Smuzhiyun
6*4882a593SmuzhiyunSee chapter 47 ("LINFlexD") in the reference manual[1].
7*4882a593Smuzhiyun
8*4882a593SmuzhiyunRequired properties:
9*4882a593Smuzhiyun- compatible :
10*4882a593Smuzhiyun  - "fsl,s32v234-linflexuart" for LINFlexD configured in UART mode, which
11*4882a593Smuzhiyun    is compatible with the one integrated on S32V234 SoC
12*4882a593Smuzhiyun- reg : Address and length of the register set for the device
13*4882a593Smuzhiyun- interrupts : Should contain uart interrupt
14*4882a593Smuzhiyun
15*4882a593SmuzhiyunExample:
16*4882a593Smuzhiyunuart0: serial@40053000 {
17*4882a593Smuzhiyun	compatible = "fsl,s32v234-linflexuart";
18*4882a593Smuzhiyun	reg = <0x0 0x40053000 0x0 0x1000>;
19*4882a593Smuzhiyun	interrupts = <0 59 4>;
20*4882a593Smuzhiyun};
21*4882a593Smuzhiyun
22*4882a593Smuzhiyun[1] https://www.nxp.com/webapp/Download?colCode=S32V234RM
23