1*4882a593SmuzhiyunTPS51632 Voltage regulators 2*4882a593Smuzhiyun 3*4882a593SmuzhiyunRequired properties: 4*4882a593Smuzhiyun- compatible: Must be "ti,tps51632" 5*4882a593Smuzhiyun- reg: I2C slave address 6*4882a593Smuzhiyun 7*4882a593SmuzhiyunOptional properties: 8*4882a593Smuzhiyun- ti,enable-pwm-dvfs: Enable the DVFS voltage control through the PWM interface. 9*4882a593Smuzhiyun- ti,dvfs-step-20mV: The 20mV step voltage when PWM DVFS enabled. Missing this 10*4882a593Smuzhiyun will set 10mV step voltage in PWM DVFS mode. In normal mode, the voltage 11*4882a593Smuzhiyun step is 10mV as per datasheet. 12*4882a593Smuzhiyun 13*4882a593SmuzhiyunAny property defined as part of the core regulator binding, defined in 14*4882a593Smuzhiyunregulator.txt, can also be used. 15*4882a593Smuzhiyun 16*4882a593SmuzhiyunExample: 17*4882a593Smuzhiyun 18*4882a593Smuzhiyun tps51632 { 19*4882a593Smuzhiyun compatible = "ti,tps51632"; 20*4882a593Smuzhiyun reg = <0x43>; 21*4882a593Smuzhiyun regulator-name = "tps51632-vout"; 22*4882a593Smuzhiyun regulator-min-microvolt = <500000>; 23*4882a593Smuzhiyun regulator-max-microvolt = <1500000>; 24*4882a593Smuzhiyun regulator-boot-on; 25*4882a593Smuzhiyun ti,enable-pwm-dvfs; 26*4882a593Smuzhiyun ti,dvfs-step-20mV; 27*4882a593Smuzhiyun }; 28