1*4882a593SmuzhiyunDevicetree bindings for Maxim DS2760 2*4882a593Smuzhiyun==================================== 3*4882a593Smuzhiyun 4*4882a593SmuzhiyunThe ds2760 is a w1 slave device and must hence have its sub-node in DT 5*4882a593Smuzhiyununder a w1 bus master node. 6*4882a593Smuzhiyun 7*4882a593SmuzhiyunThe device exposes a power supply, so the details described in 8*4882a593SmuzhiyunDocumentation/devicetree/bindings/power/supply/power_supply.txt apply. 9*4882a593Smuzhiyun 10*4882a593SmuzhiyunRequired properties: 11*4882a593Smuzhiyun- compatible: must be "maxim,ds2760" 12*4882a593Smuzhiyun 13*4882a593SmuzhiyunOptional properties: 14*4882a593Smuzhiyun- power-supplies: Refers to one or more power supplies connected to 15*4882a593Smuzhiyun this battery. 16*4882a593Smuzhiyun- maxim,pmod-enabled: This boolean property enables the DS2760 to enter 17*4882a593Smuzhiyun sleep mode when the DQ line goes low for greater 18*4882a593Smuzhiyun than 2 seconds and leave sleep Mode when the DQ 19*4882a593Smuzhiyun line goes high. 20*4882a593Smuzhiyun- maxim,cache-time-ms: Time im milliseconds to cache the data for. When 21*4882a593Smuzhiyun this time expires, the values are read again from 22*4882a593Smuzhiyun the hardware. Defaults to 1000. 23*4882a593Smuzhiyun- rated-capacity-microamp-hours: 24*4882a593Smuzhiyun The rated capacity of the battery, in mAh. 25*4882a593Smuzhiyun If not specified, the value stored in the 26*4882a593Smuzhiyun non-volatile chip memory is used. 27