xref: /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt (revision 4882a59341e53eb6f0b4789bf948001014eff981)
1*4882a593SmuzhiyunROCKCHIP HDMI PHY WITH INNO IP BLOCK
2*4882a593Smuzhiyun
3*4882a593SmuzhiyunRequired properties:
4*4882a593Smuzhiyun - compatible : should be one of the listed compatibles:
5*4882a593Smuzhiyun	* "rockchip,rk3228-hdmi-phy",
6*4882a593Smuzhiyun	* "rockchip,rk3328-hdmi-phy";
7*4882a593Smuzhiyun - reg : Address and length of the hdmi phy control register set
8*4882a593Smuzhiyun - clocks : phandle + clock specifier for the phy clocks
9*4882a593Smuzhiyun - clock-names : string, clock name, must contain "sysclk" for system
10*4882a593Smuzhiyun	  control and register configuration, "refoclk" for crystal-
11*4882a593Smuzhiyun	  oscillator reference PLL clock input and "refpclk" for pclk-
12*4882a593Smuzhiyun	  based refeference PLL clock input.
13*4882a593Smuzhiyun - #clock-cells: should be 0.
14*4882a593Smuzhiyun - clock-output-names : shall be the name for the output clock.
15*4882a593Smuzhiyun - interrupts : phandle + interrupt specified for the hdmiphy interrupt
16*4882a593Smuzhiyun - #phy-cells : must be 0. See ./phy-bindings.txt for details.
17*4882a593Smuzhiyun
18*4882a593SmuzhiyunOptional properties for rk3328-hdmi-phy:
19*4882a593Smuzhiyun - nvmem-cells = phandle + nvmem specifier for the cpu-version efuse
20*4882a593Smuzhiyun - nvmem-cell-names : "cpu-version" to read the chip version, required
21*4882a593Smuzhiyun	  for adjustment to some frequency settings
22*4882a593Smuzhiyun
23*4882a593SmuzhiyunExample:
24*4882a593Smuzhiyun	hdmi_phy: hdmi-phy@12030000 {
25*4882a593Smuzhiyun		compatible = "rockchip,rk3228-hdmi-phy";
26*4882a593Smuzhiyun		reg = <0x12030000 0x10000>;
27*4882a593Smuzhiyun		#phy-cells = <0>;
28*4882a593Smuzhiyun		clocks = <&cru PCLK_HDMI_PHY>, <&xin24m>, <&cru DCLK_HDMIPHY>;
29*4882a593Smuzhiyun		clock-names = "sysclk", "refoclk", "refpclk";
30*4882a593Smuzhiyun		#clock-cells = <0>;
31*4882a593Smuzhiyun		clock-output-names = "hdmi_phy";
32*4882a593Smuzhiyun		status = "disabled";
33*4882a593Smuzhiyun	};
34*4882a593Smuzhiyun
35*4882a593SmuzhiyunThen the PHY can be used in other nodes such as:
36*4882a593Smuzhiyun
37*4882a593Smuzhiyun	hdmi: hdmi@200a0000 {
38*4882a593Smuzhiyun		compatible = "rockchip,rk3228-dw-hdmi";
39*4882a593Smuzhiyun		...
40*4882a593Smuzhiyun		phys = <&hdmi_phy>;
41*4882a593Smuzhiyun		phy-names = "hdmi";
42*4882a593Smuzhiyun		...
43*4882a593Smuzhiyun	};
44