1*4882a593Smuzhiyun* Lontium lt7911d type-c/DP to MIPI-CSI Bridge 2*4882a593Smuzhiyun 3*4882a593SmuzhiyunRequired Properties: 4*4882a593Smuzhiyun- compatible: should be "lontium,lt7911d". 5*4882a593Smuzhiyun- clocks: reference to the 27M xvclk input clock. 6*4882a593Smuzhiyun- clock-names: should be "xvclk". 7*4882a593Smuzhiyun- reset-gpios: Low active reset gpio. 8*4882a593Smuzhiyun- power-gpios: High active power gpio. 9*4882a593Smuzhiyun- hpd-ctl-gpios: High active hpd control gpio. 10*4882a593Smuzhiyun If inverted circuit, choose low active. 11*4882a593Smuzhiyun- plugin-det-gpios: Low active plugin detect gpio. 12*4882a593Smuzhiyun- interrupts: GPIO connected to the gpio5. 13*4882a593Smuzhiyun- data-lanes: should be <1 2 3 4> for four-lane operation, 14*4882a593Smuzhiyun or <1 2> for two-lane operation. 15*4882a593Smuzhiyun 16*4882a593SmuzhiyunAttention: 17*4882a593SmuzhiyunLT7911D device address 0x2b(7bit) 18*4882a593Smuzhiyun 19*4882a593SmuzhiyunExample: 20*4882a593Smuzhiyun&i2c7 { 21*4882a593Smuzhiyun status = "okay"; 22*4882a593Smuzhiyun 23*4882a593Smuzhiyun lt7911d: lt7911d@2b { 24*4882a593Smuzhiyun compatible = "lontium,lt7911d"; 25*4882a593Smuzhiyun status = "okay"; 26*4882a593Smuzhiyun reg = <0x2b>; 27*4882a593Smuzhiyun clocks = <&cru CLK_MIPI_CAMARAOUT_M1>; 28*4882a593Smuzhiyun clock-names = "xvclk"; 29*4882a593Smuzhiyun interrupt-parent = <&gpio3>; 30*4882a593Smuzhiyun interrupts = <RK_PD4 IRQ_TYPE_EDGE_RISING>; 31*4882a593Smuzhiyun power-domains = <&power RK3588_PD_VI>; 32*4882a593Smuzhiyun pinctrl-names = "default"; 33*4882a593Smuzhiyun pinctrl-0 = <&mipim1_camera1_clk>; 34*4882a593Smuzhiyun reset-gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_LOW>; 35*4882a593Smuzhiyun power-gpios = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>; 36*4882a593Smuzhiyun hpd-ctl-gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>; 37*4882a593Smuzhiyun plugin-det-gpios = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; 38*4882a593Smuzhiyun rockchip,camera-module-index = <0>; 39*4882a593Smuzhiyun rockchip,camera-module-facing = "back"; 40*4882a593Smuzhiyun rockchip,camera-module-name = "LT7911D"; 41*4882a593Smuzhiyun rockchip,camera-module-lens-name = "NC"; 42*4882a593Smuzhiyun port { 43*4882a593Smuzhiyun lt7911d_out: endpoint { 44*4882a593Smuzhiyun remote-endpoint = <&hdmi_mipi_in>; 45*4882a593Smuzhiyun data-lanes = <1 2 3 4>; 46*4882a593Smuzhiyun }; 47*4882a593Smuzhiyun }; 48*4882a593Smuzhiyun }; 49*4882a593Smuzhiyun}; 50