xref: /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/iio/proximity/sx9500.txt (revision 4882a59341e53eb6f0b4789bf948001014eff981) 
1*4882a593SmuzhiyunSemtech's SX9500 capacitive proximity button device driver
2*4882a593Smuzhiyun
3*4882a593SmuzhiyunRequired properties:
4*4882a593Smuzhiyun	- compatible: must be "semtech,sx9500"
5*4882a593Smuzhiyun	- reg: i2c address where to find the device
6*4882a593Smuzhiyun	- interrupts : the sole interrupt generated by the device
7*4882a593Smuzhiyun
8*4882a593Smuzhiyun	Refer to interrupt-controller/interrupts.txt for generic
9*4882a593Smuzhiyun	interrupt client node bindings.
10*4882a593Smuzhiyun
11*4882a593SmuzhiyunOptional properties:
12*4882a593Smuzhiyun	- reset-gpios: Reference to the GPIO connected to the device's active
13*4882a593Smuzhiyun	  low reset pin.
14*4882a593Smuzhiyun
15*4882a593SmuzhiyunExample:
16*4882a593Smuzhiyun
17*4882a593Smuzhiyunsx9500@28 {
18*4882a593Smuzhiyun	compatible = "semtech,sx9500";
19*4882a593Smuzhiyun	reg = <0x28>;
20*4882a593Smuzhiyun	interrupt-parent = <&gpio2>;
21*4882a593Smuzhiyun	interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
22*4882a593Smuzhiyun	reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
23*4882a593Smuzhiyun};
24