1*4882a593SmuzhiyunMurata ZPA2326 pressure sensor 2*4882a593Smuzhiyun 3*4882a593SmuzhiyunPressure sensor from Murata with SPI and I2C bus interfaces. 4*4882a593Smuzhiyun 5*4882a593SmuzhiyunRequired properties: 6*4882a593Smuzhiyun- compatible: "murata,zpa2326" 7*4882a593Smuzhiyun- reg: the I2C address or SPI chip select the device will respond to 8*4882a593Smuzhiyun 9*4882a593SmuzhiyunRecommended properties for SPI bus usage: 10*4882a593Smuzhiyun- spi-max-frequency: maximum SPI bus frequency as documented in 11*4882a593Smuzhiyun Documentation/devicetree/bindings/spi/spi-bus.txt 12*4882a593Smuzhiyun 13*4882a593SmuzhiyunOptional properties: 14*4882a593Smuzhiyun- vref-supply: an optional regulator that needs to be on to provide VREF 15*4882a593Smuzhiyun power to the sensor 16*4882a593Smuzhiyun- vdd-supply: an optional regulator that needs to be on to provide VDD 17*4882a593Smuzhiyun power to the sensor 18*4882a593Smuzhiyun- interrupts: interrupt mapping for IRQ as documented in 19*4882a593Smuzhiyun Documentation/devicetree/bindings/interrupt-controller/interrupts.txt 20*4882a593Smuzhiyun 21*4882a593SmuzhiyunExample: 22*4882a593Smuzhiyun 23*4882a593Smuzhiyunzpa2326@5c { 24*4882a593Smuzhiyun compatible = "murata,zpa2326"; 25*4882a593Smuzhiyun reg = <0x5c>; 26*4882a593Smuzhiyun interrupt-parent = <&gpio>; 27*4882a593Smuzhiyun interrupts = <12>; 28*4882a593Smuzhiyun vdd-supply = <&ldo_1v8_gnss>; 29*4882a593Smuzhiyun}; 30