1*4882a593SmuzhiyunMulti-Inno MI0283QT display panel 2*4882a593Smuzhiyun 3*4882a593SmuzhiyunRequired properties: 4*4882a593Smuzhiyun- compatible: "multi-inno,mi0283qt". 5*4882a593Smuzhiyun 6*4882a593SmuzhiyunThe node for this driver must be a child node of a SPI controller, hence 7*4882a593Smuzhiyunall mandatory properties described in ../spi/spi-bus.txt must be specified. 8*4882a593Smuzhiyun 9*4882a593SmuzhiyunOptional properties: 10*4882a593Smuzhiyun- dc-gpios: D/C pin. The presence/absence of this GPIO determines 11*4882a593Smuzhiyun the panel interface mode (IM[3:0] pins): 12*4882a593Smuzhiyun - present: IM=x110 4-wire 8-bit data serial interface 13*4882a593Smuzhiyun - absent: IM=x101 3-wire 9-bit data serial interface 14*4882a593Smuzhiyun- reset-gpios: Reset pin 15*4882a593Smuzhiyun- power-supply: A regulator node for the supply voltage. 16*4882a593Smuzhiyun- backlight: phandle of the backlight device attached to the panel 17*4882a593Smuzhiyun- rotation: panel rotation in degrees counter clockwise (0,90,180,270) 18*4882a593Smuzhiyun 19*4882a593SmuzhiyunExample: 20*4882a593Smuzhiyun mi0283qt@0{ 21*4882a593Smuzhiyun compatible = "multi-inno,mi0283qt"; 22*4882a593Smuzhiyun reg = <0>; 23*4882a593Smuzhiyun spi-max-frequency = <32000000>; 24*4882a593Smuzhiyun rotation = <90>; 25*4882a593Smuzhiyun dc-gpios = <&gpio 25 0>; 26*4882a593Smuzhiyun backlight = <&backlight>; 27*4882a593Smuzhiyun }; 28