1*4882a593SmuzhiyunHimax HX8357D display panels 2*4882a593Smuzhiyun 3*4882a593SmuzhiyunThis binding is for display panels using a Himax HX8357D controller in SPI 4*4882a593Smuzhiyunmode, such as the Adafruit 3.5" TFT for Raspberry Pi. 5*4882a593Smuzhiyun 6*4882a593SmuzhiyunRequired properties: 7*4882a593Smuzhiyun- compatible: "adafruit,yx350hv15", "himax,hx8357d" 8*4882a593Smuzhiyun- dc-gpios: D/C pin 9*4882a593Smuzhiyun- reg: address of the panel on the SPI bus 10*4882a593Smuzhiyun 11*4882a593SmuzhiyunThe node for this driver must be a child node of a SPI controller, hence 12*4882a593Smuzhiyunall mandatory properties described in ../spi/spi-bus.txt must be specified. 13*4882a593Smuzhiyun 14*4882a593SmuzhiyunOptional properties: 15*4882a593Smuzhiyun- rotation: panel rotation in degrees counter clockwise (0,90,180,270) 16*4882a593Smuzhiyun- backlight: phandle of the backlight device attached to the panel 17*4882a593Smuzhiyun 18*4882a593SmuzhiyunExample: 19*4882a593Smuzhiyun display@0{ 20*4882a593Smuzhiyun compatible = "adafruit,yx350hv15", "himax,hx8357d"; 21*4882a593Smuzhiyun reg = <0>; 22*4882a593Smuzhiyun spi-max-frequency = <32000000>; 23*4882a593Smuzhiyun dc-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; 24*4882a593Smuzhiyun rotation = <90>; 25*4882a593Smuzhiyun backlight = <&backlight>; 26*4882a593Smuzhiyun }; 27