xref: /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/display/bridge/anx6345.txt (revision 4882a59341e53eb6f0b4789bf948001014eff981) 
1*4882a593SmuzhiyunAnalogix ANX6345 eDP Transmitter
2*4882a593Smuzhiyun--------------------------------
3*4882a593Smuzhiyun
4*4882a593SmuzhiyunThe ANX6345 is an ultra-low power Full-HD eDP transmitter designed for
5*4882a593Smuzhiyunportable devices.
6*4882a593Smuzhiyun
7*4882a593SmuzhiyunRequired properties:
8*4882a593Smuzhiyun
9*4882a593Smuzhiyun - compatible		: "analogix,anx6345"
10*4882a593Smuzhiyun - reg			: I2C address of the device
11*4882a593Smuzhiyun - reset-gpios		: Which GPIO to use for reset
12*4882a593Smuzhiyun
13*4882a593SmuzhiyunOptional properties:
14*4882a593Smuzhiyun
15*4882a593Smuzhiyun - dvdd12-supply	: Regulator for 1.2V digital core power.
16*4882a593Smuzhiyun - dvdd25-supply	: Regulator for 2.5V digital core power.
17*4882a593Smuzhiyun - panel-supply		: Regulator for the power of the panel.
18*4882a593Smuzhiyun - edid			: verbatim EDID data block describing attached
19*4882a593Smuzhiyun			  panel, only used when the panel has no EDID info.
20*4882a593Smuzhiyun - Video port for RGB input, using the DT bindings defined in [1].
21*4882a593Smuzhiyun
22*4882a593Smuzhiyun[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
23*4882a593Smuzhiyun
24*4882a593SmuzhiyunExample:
25*4882a593Smuzhiyun
26*4882a593Smuzhiyunanx6345: anx6345@38 {
27*4882a593Smuzhiyun	compatible = "analogix,anx6345";
28*4882a593Smuzhiyun	reg = <0x38>;
29*4882a593Smuzhiyun	reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
30*4882a593Smuzhiyun	panel-supply = <&reg_dc1sw>;
31*4882a593Smuzhiyun	dvdd25-supply = <&reg_dldo2>;
32*4882a593Smuzhiyun	dvdd12-supply = <&reg_fldo1>;
33*4882a593Smuzhiyun
34*4882a593Smuzhiyun	port {
35*4882a593Smuzhiyun		anx6345_in: endpoint {
36*4882a593Smuzhiyun			remote-endpoint = <&tcon0_out_anx6345>;
37*4882a593Smuzhiyun		};
38*4882a593Smuzhiyun	};
39*4882a593Smuzhiyun};
40