xref: /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt (revision 4882a59341e53eb6f0b4789bf948001014eff981)
1*4882a593Smuzhiyun* Samsung S3C2410 Clock Controller
2*4882a593Smuzhiyun
3*4882a593SmuzhiyunThe S3C2410 clock controller generates and supplies clock to various controllers
4*4882a593Smuzhiyunwithin the SoC. The clock binding described here is applicable to the s3c2410,
5*4882a593Smuzhiyuns3c2440 and s3c2442 SoCs in the s3c24x family.
6*4882a593Smuzhiyun
7*4882a593SmuzhiyunRequired Properties:
8*4882a593Smuzhiyun
9*4882a593Smuzhiyun- compatible: should be one of the following.
10*4882a593Smuzhiyun  - "samsung,s3c2410-clock" - controller compatible with S3C2410 SoC.
11*4882a593Smuzhiyun  - "samsung,s3c2440-clock" - controller compatible with S3C2440 SoC.
12*4882a593Smuzhiyun  - "samsung,s3c2442-clock" - controller compatible with S3C2442 SoC.
13*4882a593Smuzhiyun- reg: physical base address of the controller and length of memory mapped
14*4882a593Smuzhiyun  region.
15*4882a593Smuzhiyun- #clock-cells: should be 1.
16*4882a593Smuzhiyun
17*4882a593SmuzhiyunEach clock is assigned an identifier and client nodes can use this identifier
18*4882a593Smuzhiyunto specify the clock which they consume. Some of the clocks are available only
19*4882a593Smuzhiyunon a particular SoC.
20*4882a593Smuzhiyun
21*4882a593SmuzhiyunAll available clocks are defined as preprocessor macros in
22*4882a593Smuzhiyundt-bindings/clock/s3c2410.h header and can be used in device
23*4882a593Smuzhiyuntree sources.
24*4882a593Smuzhiyun
25*4882a593SmuzhiyunExternal clocks:
26*4882a593Smuzhiyun
27*4882a593SmuzhiyunThe xti clock used as input for the plls is generated outside the SoC. It is
28*4882a593Smuzhiyunexpected that is are defined using standard clock bindings with a
29*4882a593Smuzhiyunclock-output-names value of "xti".
30*4882a593Smuzhiyun
31*4882a593SmuzhiyunExample: Clock controller node:
32*4882a593Smuzhiyun
33*4882a593Smuzhiyun	clocks: clock-controller@4c000000 {
34*4882a593Smuzhiyun		compatible = "samsung,s3c2410-clock";
35*4882a593Smuzhiyun		reg = <0x4c000000 0x20>;
36*4882a593Smuzhiyun		#clock-cells = <1>;
37*4882a593Smuzhiyun	};
38*4882a593Smuzhiyun
39*4882a593SmuzhiyunExample: UART controller node that consumes the clock generated by the clock
40*4882a593Smuzhiyun  controller (refer to the standard clock bindings for information about
41*4882a593Smuzhiyun  "clocks" and "clock-names" properties):
42*4882a593Smuzhiyun
43*4882a593Smuzhiyun	serial@50004000 {
44*4882a593Smuzhiyun		compatible = "samsung,s3c2440-uart";
45*4882a593Smuzhiyun		reg = <0x50004000 0x4000>;
46*4882a593Smuzhiyun		interrupts = <1 23 3 4>, <1 23 4 4>;
47*4882a593Smuzhiyun		clock-names = "uart", "clk_uart_baud2";
48*4882a593Smuzhiyun		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>;
49*4882a593Smuzhiyun	};
50