1*4882a593Smuzhiyun* Rockchip RV1108 Clock and Reset Unit 2*4882a593Smuzhiyun 3*4882a593SmuzhiyunThe RV1108 clock controller generates and supplies clock to various 4*4882a593Smuzhiyuncontrollers within the SoC and also implements a reset controller for SoC 5*4882a593Smuzhiyunperipherals. 6*4882a593Smuzhiyun 7*4882a593SmuzhiyunRequired Properties: 8*4882a593Smuzhiyun 9*4882a593Smuzhiyun- compatible: should be "rockchip,rv1108-cru" 10*4882a593Smuzhiyun- reg: physical base address of the controller and length of memory mapped 11*4882a593Smuzhiyun region. 12*4882a593Smuzhiyun- #clock-cells: should be 1. 13*4882a593Smuzhiyun- #reset-cells: should be 1. 14*4882a593Smuzhiyun 15*4882a593SmuzhiyunOptional Properties: 16*4882a593Smuzhiyun 17*4882a593Smuzhiyun- rockchip,grf: phandle to the syscon managing the "general register files" 18*4882a593Smuzhiyun If missing pll rates are not changeable, due to the missing pll lock status. 19*4882a593Smuzhiyun 20*4882a593SmuzhiyunEach clock is assigned an identifier and client nodes can use this identifier 21*4882a593Smuzhiyunto specify the clock which they consume. All available clocks are defined as 22*4882a593Smuzhiyunpreprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be 23*4882a593Smuzhiyunused in device tree sources. Similar macros exist for the reset sources in 24*4882a593Smuzhiyunthese files. 25*4882a593Smuzhiyun 26*4882a593SmuzhiyunExternal clocks: 27*4882a593Smuzhiyun 28*4882a593SmuzhiyunThere are several clocks that are generated outside the SoC. It is expected 29*4882a593Smuzhiyunthat they are defined using standard clock bindings with following 30*4882a593Smuzhiyunclock-output-names: 31*4882a593Smuzhiyun - "xin24m" - crystal input - required, 32*4882a593Smuzhiyun - "ext_vip" - external VIP clock - optional 33*4882a593Smuzhiyun - "ext_i2s" - external I2S clock - optional 34*4882a593Smuzhiyun - "ext_gmac" - external GMAC clock - optional 35*4882a593Smuzhiyun - "hdmiphy" - external clock input derived from HDMI PHY - optional 36*4882a593Smuzhiyun - "usbphy" - external clock input derived from USB PHY - optional 37*4882a593Smuzhiyun 38*4882a593SmuzhiyunExample: Clock controller node: 39*4882a593Smuzhiyun 40*4882a593Smuzhiyun cru: cru@20200000 { 41*4882a593Smuzhiyun compatible = "rockchip,rv1108-cru"; 42*4882a593Smuzhiyun reg = <0x20200000 0x1000>; 43*4882a593Smuzhiyun rockchip,grf = <&grf>; 44*4882a593Smuzhiyun 45*4882a593Smuzhiyun #clock-cells = <1>; 46*4882a593Smuzhiyun #reset-cells = <1>; 47*4882a593Smuzhiyun }; 48*4882a593Smuzhiyun 49*4882a593SmuzhiyunExample: UART controller node that consumes the clock generated by the clock 50*4882a593Smuzhiyun controller: 51*4882a593Smuzhiyun 52*4882a593Smuzhiyun uart0: serial@10230000 { 53*4882a593Smuzhiyun compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart"; 54*4882a593Smuzhiyun reg = <0x10230000 0x100>; 55*4882a593Smuzhiyun interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; 56*4882a593Smuzhiyun reg-shift = <2>; 57*4882a593Smuzhiyun reg-io-width = <4>; 58*4882a593Smuzhiyun clocks = <&cru SCLK_UART0>; 59*4882a593Smuzhiyun }; 60