1*4882a593Smuzhiyun============== 2*4882a593SmuzhiyunCerfBoard/Cube 3*4882a593Smuzhiyun============== 4*4882a593Smuzhiyun 5*4882a593Smuzhiyun*** The StrongARM version of the CerfBoard/Cube has been discontinued *** 6*4882a593Smuzhiyun 7*4882a593SmuzhiyunThe Intrinsyc CerfBoard is a StrongARM 1110-based computer on a board 8*4882a593Smuzhiyunthat measures approximately 2" square. It includes an Ethernet 9*4882a593Smuzhiyuncontroller, an RS232-compatible serial port, a USB function port, and 10*4882a593Smuzhiyunone CompactFlash+ slot on the back. Pictures can be found at the 11*4882a593SmuzhiyunIntrinsyc website, http://www.intrinsyc.com. 12*4882a593Smuzhiyun 13*4882a593SmuzhiyunThis document describes the support in the Linux kernel for the 14*4882a593SmuzhiyunIntrinsyc CerfBoard. 15*4882a593Smuzhiyun 16*4882a593SmuzhiyunSupported in this version 17*4882a593Smuzhiyun========================= 18*4882a593Smuzhiyun 19*4882a593Smuzhiyun - CompactFlash+ slot (select PCMCIA in General Setup and any options 20*4882a593Smuzhiyun that may be required) 21*4882a593Smuzhiyun - Onboard Crystal CS8900 Ethernet controller (Cerf CS8900A support in 22*4882a593Smuzhiyun Network Devices) 23*4882a593Smuzhiyun - Serial ports with a serial console (hardcoded to 38400 8N1) 24*4882a593Smuzhiyun 25*4882a593SmuzhiyunIn order to get this kernel onto your Cerf, you need a server that runs 26*4882a593Smuzhiyunboth BOOTP and TFTP. Detailed instructions should have come with your 27*4882a593Smuzhiyunevaluation kit on how to use the bootloader. This series of commands 28*4882a593Smuzhiyunwill suffice:: 29*4882a593Smuzhiyun 30*4882a593Smuzhiyun make ARCH=arm CROSS_COMPILE=arm-linux- cerfcube_defconfig 31*4882a593Smuzhiyun make ARCH=arm CROSS_COMPILE=arm-linux- zImage 32*4882a593Smuzhiyun make ARCH=arm CROSS_COMPILE=arm-linux- modules 33*4882a593Smuzhiyun cp arch/arm/boot/zImage <TFTP directory> 34*4882a593Smuzhiyun 35*4882a593Smuzhiyunsupport@intrinsyc.com 36