1*4882a593SmuzhiyunWhat: /sys/class/leds/<led>/device_name 2*4882a593SmuzhiyunDate: Dec 2017 3*4882a593SmuzhiyunKernelVersion: 4.16 4*4882a593SmuzhiyunContact: linux-leds@vger.kernel.org 5*4882a593SmuzhiyunDescription: 6*4882a593Smuzhiyun Specifies the network device name to monitor. 7*4882a593Smuzhiyun 8*4882a593SmuzhiyunWhat: /sys/class/leds/<led>/interval 9*4882a593SmuzhiyunDate: Dec 2017 10*4882a593SmuzhiyunKernelVersion: 4.16 11*4882a593SmuzhiyunContact: linux-leds@vger.kernel.org 12*4882a593SmuzhiyunDescription: 13*4882a593Smuzhiyun Specifies the duration of the LED blink in milliseconds. 14*4882a593Smuzhiyun Defaults to 50 ms. 15*4882a593Smuzhiyun 16*4882a593SmuzhiyunWhat: /sys/class/leds/<led>/link 17*4882a593SmuzhiyunDate: Dec 2017 18*4882a593SmuzhiyunKernelVersion: 4.16 19*4882a593SmuzhiyunContact: linux-leds@vger.kernel.org 20*4882a593SmuzhiyunDescription: 21*4882a593Smuzhiyun Signal the link state of the named network device. 22*4882a593Smuzhiyun 23*4882a593Smuzhiyun If set to 0 (default), the LED's normal state is off. 24*4882a593Smuzhiyun 25*4882a593Smuzhiyun If set to 1, the LED's normal state reflects the link state 26*4882a593Smuzhiyun of the named network device. 27*4882a593Smuzhiyun Setting this value also immediately changes the LED state. 28*4882a593Smuzhiyun 29*4882a593Smuzhiyun 30*4882a593SmuzhiyunWhat: /sys/class/leds/<led>/tx 31*4882a593SmuzhiyunDate: Dec 2017 32*4882a593SmuzhiyunKernelVersion: 4.16 33*4882a593SmuzhiyunContact: linux-leds@vger.kernel.org 34*4882a593SmuzhiyunDescription: 35*4882a593Smuzhiyun Signal transmission of data on the named network device. 36*4882a593Smuzhiyun 37*4882a593Smuzhiyun If set to 0 (default), the LED will not blink on transmission. 38*4882a593Smuzhiyun 39*4882a593Smuzhiyun If set to 1, the LED will blink for the milliseconds specified 40*4882a593Smuzhiyun in interval to signal transmission. 41*4882a593Smuzhiyun 42*4882a593SmuzhiyunWhat: /sys/class/leds/<led>/rx 43*4882a593SmuzhiyunDate: Dec 2017 44*4882a593SmuzhiyunKernelVersion: 4.16 45*4882a593SmuzhiyunContact: linux-leds@vger.kernel.org 46*4882a593SmuzhiyunDescription: 47*4882a593Smuzhiyun Signal reception of data on the named network device. 48*4882a593Smuzhiyun 49*4882a593Smuzhiyun If set to 0 (default), the LED will not blink on reception. 50*4882a593Smuzhiyun 51*4882a593Smuzhiyun If set to 1, the LED will blink for the milliseconds specified 52*4882a593Smuzhiyun in interval to signal reception. 53