1*4882a593Smuzhiyun /****************************************************************************** 2*4882a593Smuzhiyun * 3*4882a593Smuzhiyun * Copyright(c) 2007 - 2017 Realtek Corporation. 4*4882a593Smuzhiyun * 5*4882a593Smuzhiyun * This program is free software; you can redistribute it and/or modify it 6*4882a593Smuzhiyun * under the terms of version 2 of the GNU General Public License as 7*4882a593Smuzhiyun * published by the Free Software Foundation. 8*4882a593Smuzhiyun * 9*4882a593Smuzhiyun * This program is distributed in the hope that it will be useful, but WITHOUT 10*4882a593Smuzhiyun * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11*4882a593Smuzhiyun * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12*4882a593Smuzhiyun * more details. 13*4882a593Smuzhiyun * 14*4882a593Smuzhiyun *****************************************************************************/ 15*4882a593Smuzhiyun #ifndef __RTL8192F_LED_H__ 16*4882a593Smuzhiyun #define __RTL8192F_LED_H__ 17*4882a593Smuzhiyun 18*4882a593Smuzhiyun #include <drv_conf.h> 19*4882a593Smuzhiyun #include <osdep_service.h> 20*4882a593Smuzhiyun #include <drv_types.h> 21*4882a593Smuzhiyun 22*4882a593Smuzhiyun #ifdef CONFIG_RTW_SW_LED 23*4882a593Smuzhiyun /* ******************************************************************************** 24*4882a593Smuzhiyun * Interface to manipulate LED objects. 25*4882a593Smuzhiyun * ******************************************************************************** */ 26*4882a593Smuzhiyun #ifdef CONFIG_USB_HCI 27*4882a593Smuzhiyun /** REG_LED_CFG (0x4C) **/ 28*4882a593Smuzhiyun /* LED0 GPIO Enable, 0: disable, 1: enable*/ 29*4882a593Smuzhiyun #define LED0_GPIO_ENABLE_8192FU (BIT21) 30*4882a593Smuzhiyun /* LED0 Disabled for analog signal usage, 0:Enable (output mode), 1: disable (input mode) */ 31*4882a593Smuzhiyun #define LED0_DISABLE_ANALOGSIGNAL_8192FU (BIT7) 32*4882a593Smuzhiyun /* LED0 software value, 0: turn off, 1:turn on */ 33*4882a593Smuzhiyun #define LED0_SW_VALUE_8192FU (BIT3) 34*4882a593Smuzhiyun 35*4882a593Smuzhiyun /** REG_GPIO_MUXCFG (0x40) **/ 36*4882a593Smuzhiyun /* Enable LED[1:0] for RFE CTRL[7:6], 0: BT, 1: Wi-Fi */ 37*4882a593Smuzhiyun #define ENABLE_LED0_AND_LED1_CTRL_BY_WIFI_8192FU (BIT3) 38*4882a593Smuzhiyun 39*4882a593Smuzhiyun /** REG_SW_GPIO_SHARE_CTRL_0 (0x1038) **/ 40*4882a593Smuzhiyun /* LED Output PIN Location, 0: GPIOA_0, 1:GPIOB_4*/ 41*4882a593Smuzhiyun #define LED_OUTPUT_PIN_LOCATION_8192FU (BIT16) 42*4882a593Smuzhiyun 43*4882a593Smuzhiyun u8 rtl8192fu_CfgLed0Hw(PADAPTER padapter); 44*4882a593Smuzhiyun void rtl8192fu_InitSwLeds(PADAPTER padapter); 45*4882a593Smuzhiyun void rtl8192fu_DeInitSwLeds(PADAPTER padapter); 46*4882a593Smuzhiyun #endif 47*4882a593Smuzhiyun 48*4882a593Smuzhiyun #ifdef CONFIG_SDIO_HCI 49*4882a593Smuzhiyun void rtl8192fs_InitSwLeds(PADAPTER padapter); 50*4882a593Smuzhiyun void rtl8192fs_DeInitSwLeds(PADAPTER padapter); 51*4882a593Smuzhiyun #endif 52*4882a593Smuzhiyun 53*4882a593Smuzhiyun #ifdef CONFIG_PCI_HCI 54*4882a593Smuzhiyun void rtl8192fe_InitSwLeds(PADAPTER padapter); 55*4882a593Smuzhiyun void rtl8192fe_DeInitSwLeds(PADAPTER padapter); 56*4882a593Smuzhiyun #endif 57*4882a593Smuzhiyun #endif /*#ifdef CONFIG_RTW_SW_LED*/ 58*4882a593Smuzhiyun 59*4882a593Smuzhiyun #endif 60