xref: /OK3568_Linux_fs/external/rkwifibt/drivers/bcmdhd/include/sbchipc.h (revision 4882a59341e53eb6f0b4789bf948001014eff981)

/*
 * SiliconBackplane Chipcommon core hardware definitions.
 *
 * The chipcommon core provides chip identification, SB control,
 * JTAG, 0/1/2 UARTs, clock frequency control, a watchdog interrupt timer,
 * GPIO interface, extbus, and support for serial and parallel flashes.
 *
 * Copyright (C) 2020, Broadcom.
 *
 *      Unless you and Broadcom execute a separate written software license
 * agreement governing use of this software, this software is licensed to you
 * under the terms of the GNU General Public License version 2 (the "GPL"),
 * available at http://www.broadcom.com/licenses/GPLv2.php, with the
 * following added to such license:
 *
 *      As a special exception, the copyright holders of this software give you
 * permission to link this software with independent modules, and to copy and
 * distribute the resulting executable under terms of your choice, provided that
 * you also meet, for each linked independent module, the terms and conditions of
 * the license of that module.  An independent module is a module which is not
 * derived from this software.  The special exception does not apply to any
 * modifications of the software.
 *
 *
 * <<Broadcom-WL-IPTag/Dual:>>
 */

#ifndef	_SBCHIPC_H
#define	_SBCHIPC_H

#if !defined(_LANGUAGE_ASSEMBLY) && !defined(__ASSEMBLY__)

/* cpp contortions to concatenate w/arg prescan */
#ifndef PAD
#define	_PADLINE(line)	pad ## line
#define	_XSTR(line)	_PADLINE(line)
#define	PAD		_XSTR(__LINE__)
#endif	/* PAD */

#define BCM_MASK32(msb, lsb)	((~0u >> (32u - (msb) - 1u)) & (~0u << (lsb)))
#include <bcmutils.h>
#ifdef WL_INITVALS
#include <wl_initvals.h>
#endif

/**
 * In chipcommon rev 49 the pmu registers have been moved from chipc to the pmu core if the
 * 'AOBPresent' bit of 'CoreCapabilitiesExt' is set. If this field is set, the traditional chipc to
 * [pmu|gci|sreng] register interface is deprecated and removed. These register blocks would instead
 * be assigned their respective chipc-specific address space and connected to the Always On
 * Backplane via the APB interface.
 */
typedef volatile struct {
	uint32  PAD[384];
	uint32  pmucontrol;             /* 0x600 */
	uint32  pmucapabilities;        /* 0x604 */
	uint32  pmustatus;              /* 0x608 */
	uint32  res_state;              /* 0x60C */
	uint32  res_pending;            /* 0x610 */
	uint32  pmutimer;               /* 0x614 */
	uint32  min_res_mask;           /* 0x618 */
	uint32  max_res_mask;           /* 0x61C */
	uint32  res_table_sel;          /* 0x620 */
	uint32  res_dep_mask;
	uint32  res_updn_timer;
	uint32  res_timer;
	uint32  clkstretch;
	uint32  pmuwatchdog;
	uint32  gpiosel;                /* 0x638, rev >= 1 */
	uint32  gpioenable;             /* 0x63c, rev >= 1 */
	uint32  res_req_timer_sel;      /* 0x640 */
	uint32  res_req_timer;          /* 0x644 */
	uint32  res_req_mask;           /* 0x648 */
	uint32	core_cap_ext;           /* 0x64C */
	uint32  chipcontrol_addr;       /* 0x650 */
	uint32  chipcontrol_data;       /* 0x654 */
	uint32  regcontrol_addr;
	uint32  regcontrol_data;
	uint32  pllcontrol_addr;
	uint32  pllcontrol_data;
	uint32  pmustrapopt;            /* 0x668, corerev >= 28 */
	uint32  pmu_xtalfreq;           /* 0x66C, pmurev >= 10 */
	uint32  retention_ctl;          /* 0x670 */
	uint32  ILPPeriod;              /* 0x674 */
	uint32  PAD[2];
	uint32  retention_grpidx;       /* 0x680 */
	uint32  retention_grpctl;       /* 0x684 */
	uint32  mac_res_req_timer;      /* 0x688 */
	uint32  mac_res_req_mask;       /* 0x68c */
	uint32  spm_ctrl;		/* 0x690 */
	uint32  spm_cap;		/* 0x694 */
	uint32  spm_clk_ctrl;		/* 0x698 */
	uint32  int_hi_status;		/* 0x69c */
	uint32  int_lo_status;		/* 0x6a0 */
	uint32  mon_table_addr;		/* 0x6a4 */
	uint32  mon_ctrl_n;		/* 0x6a8 */
	uint32  mon_status_n;		/* 0x6ac */
	uint32  int_treshold_n;		/* 0x6b0 */
	uint32  watermarks_n;		/* 0x6b4 */
	uint32  spm_debug;		/* 0x6b8 */
	uint32  PAD[1];
	uint32  vtrim_ctrl;		/* 0x6c0 */
	uint32  vtrim_status;		/* 0x6c4 */
	uint32  usec_timer;		/* 0x6c8 */
	uint32  usec_timer_frac;	/* 0x6cc */
	uint32  pcie_tpower_on;		/* 0x6d0 */
	uint32  pcie_tport_cnt;		/* 0x6d4 */
	uint32  pmucontrol_ext;         /* 0x6d8 */
	uint32  slowclkperiod;          /* 0x6dc */
	uint32	pmu_statstimer_addr;	/* 0x6e0 */
	uint32	pmu_statstimer_ctrl;	/* 0x6e4 */
	uint32	pmu_statstimer_N;	/* 0x6e8 */
	uint32	PAD[1];
	uint32  mac_res_req_timer1;	/* 0x6f0 */
	uint32  mac_res_req_mask1;	/* 0x6f4 */
	uint32	PAD[2];
	uint32  pmuintmask0;            /* 0x700 */
	uint32  pmuintmask1;            /* 0x704 */
	uint32  PAD[2];
	uint32  fis_start_min_res_mask;	/* 0x710 */
	uint32  PAD[3];
	uint32  rsrc_event0;		/* 0x720 */
	uint32  PAD[3];
	uint32  slowtimer2;		/* 0x730 */
	uint32  slowtimerfrac2;		/* 0x734 */
	uint32  mac_res_req_timer2;	/* 0x738 */
	uint32  mac_res_req_mask2;	/* 0x73c */
	uint32  pmuintstatus;           /* 0x740 */
	uint32  extwakeupstatus;        /* 0x744 */
	uint32  watchdog_res_mask;      /* 0x748 */
	uint32  PAD[1];                 /* 0x74C */
	uint32  swscratch;              /* 0x750 */
	uint32  PAD[3];                 /* 0x754-0x75C */
	uint32	extwakemask0;		/* 0x760 */
	uint32	extwakemask1;		/* 0x764 */
	uint32  PAD[2];                 /* 0x768-0x76C */
	uint32  extwakereqmask[2];      /* 0x770-0x774 */
	uint32  PAD[2];                 /* 0x778-0x77C */
	uint32  pmuintctrl0;            /* 0x780 */
	uint32  pmuintctrl1;            /* 0x784 */
	uint32  PAD[2];
	uint32  extwakectrl[2];         /* 0x790 */
	uint32	PAD[7];
	uint32  fis_ctrl_status;	/* 0x7b4 */
	uint32  fis_min_res_mask;	/* 0x7b8 */
	uint32	PAD[1];
	uint32	precision_tmr_ctrl_status;	/* 0x7c0 */
	uint32	precision_tmr_capture_low;	/* 0x7c4 */
	uint32	precision_tmr_capture_high;	/* 0x7c8 */
	uint32	precision_tmr_capture_frac;	/* 0x7cc */
	uint32	precision_tmr_running_low;	/* 0x7d0 */
	uint32	precision_tmr_running_high;	/* 0x7d4 */
	uint32	precision_tmr_running_frac;	/* 0x7d8 */
	uint32  PAD[3];
	uint32	core_cap_ext1;			/* 0x7e8 */
	uint32	PAD[5];
	uint32  rsrc_substate_ctl_sts;		/* 0x800 */
	uint32  rsrc_substate_trans_tmr;	/* 0x804 */
	uint32	PAD[2];
	uint32  dvfs_ctrl1;			/* 0x810 */
	uint32  dvfs_ctrl2;			/* 0x814 */
	uint32  dvfs_voltage;			/* 0x818 */
	uint32  dvfs_status;			/* 0x81c */
	uint32  dvfs_core_table_address;	/* 0x820 */
	uint32  dvfs_core_ctrl;			/* 0x824 */
} pmuregs_t;

typedef struct eci_prerev35 {
	uint32	eci_output;
	uint32	eci_control;
	uint32	eci_inputlo;
	uint32	eci_inputmi;
	uint32	eci_inputhi;
	uint32	eci_inputintpolaritylo;
	uint32	eci_inputintpolaritymi;
	uint32	eci_inputintpolarityhi;
	uint32	eci_intmasklo;
	uint32	eci_intmaskmi;
	uint32	eci_intmaskhi;
	uint32	eci_eventlo;
	uint32	eci_eventmi;
	uint32	eci_eventhi;
	uint32	eci_eventmasklo;
	uint32	eci_eventmaskmi;
	uint32	eci_eventmaskhi;
	uint32	PAD[3];
} eci_prerev35_t;

typedef struct eci_rev35 {
	uint32	eci_outputlo;
	uint32	eci_outputhi;
	uint32	eci_controllo;
	uint32	eci_controlhi;
	uint32	eci_inputlo;
	uint32	eci_inputhi;
	uint32	eci_inputintpolaritylo;
	uint32	eci_inputintpolarityhi;
	uint32	eci_intmasklo;
	uint32	eci_intmaskhi;
	uint32	eci_eventlo;
	uint32	eci_eventhi;
	uint32	eci_eventmasklo;
	uint32	eci_eventmaskhi;
	uint32	eci_auxtx;
	uint32	eci_auxrx;
	uint32	eci_datatag;
	uint32	eci_uartescvalue;
	uint32	eci_autobaudctr;
	uint32	eci_uartfifolevel;
} eci_rev35_t;

typedef struct flash_config {
	uint32	PAD[19];
	/* Flash struct configuration registers (0x18c) for BCM4706 (corerev = 31) */
	uint32 flashstrconfig;
} flash_config_t;

typedef volatile struct {
	uint32	chipid;			/* 0x0 */
	uint32	capabilities;
	uint32	corecontrol;		/* corerev >= 1 */
	uint32	bist;

	/* OTP */
	uint32	otpstatus;		/* 0x10, corerev >= 10 */
	uint32	otpcontrol;
	uint32	otpprog;
	uint32	otplayout;		/* corerev >= 23 */

	/* Interrupt control */
	uint32	intstatus;		/* 0x20 */
	uint32	intmask;

	/* Chip specific regs */
	uint32	chipcontrol;		/* 0x28, rev >= 11 */
	uint32	chipstatus;		/* 0x2c, rev >= 11 */

	/* Jtag Master */
	uint32	jtagcmd;		/* 0x30, rev >= 10 */
	uint32	jtagir;
	uint32	jtagdr;
	uint32	jtagctrl;

	/* serial flash interface registers */
	uint32	flashcontrol;		/* 0x40 */
	uint32	flashaddress;
	uint32	flashdata;
	uint32	otplayoutextension;	/* rev >= 35 */

	/* Silicon backplane configuration broadcast control */
	uint32	broadcastaddress;	/* 0x50 */
	uint32	broadcastdata;

	/* gpio - cleared only by power-on-reset */
	uint32	gpiopullup;		/* 0x58, corerev >= 20 */
	uint32	gpiopulldown;		/* 0x5c, corerev >= 20 */
	uint32	gpioin;			/* 0x60 */
	uint32	gpioout;		/* 0x64 */
	uint32	gpioouten;		/* 0x68 */
	uint32	gpiocontrol;		/* 0x6C */
	uint32	gpiointpolarity;	/* 0x70 */
	uint32	gpiointmask;		/* 0x74 */

	/* GPIO events corerev >= 11 */
	uint32	gpioevent;
	uint32	gpioeventintmask;

	/* Watchdog timer */
	uint32	watchdog;		/* 0x80 */

	/* GPIO events corerev >= 11 */
	uint32	gpioeventintpolarity;

	/* GPIO based LED powersave regs corerev >= 16 */
	uint32  gpiotimerval;		/* 0x88 */         /* Obsolete and unused now */
	uint32  gpiotimeroutmask;                          /* Obsolete and unused now */

	/* clock control */
	uint32	clockcontrol_n;		/* 0x90 */
	uint32	clockcontrol_sb;	/* aka m0 */
	uint32	clockcontrol_pci;	/* aka m1 */
	uint32	clockcontrol_m2;	/* mii/uart/mipsref */
	uint32	clockcontrol_m3;	/* cpu */
	uint32	clkdiv;			/* corerev >= 3 */
	uint32	gpiodebugsel;		/* corerev >= 28 */
	uint32	capabilities_ext;	/* 0xac  */

	/* pll delay registers (corerev >= 4) */
	uint32	pll_on_delay;		/* 0xb0 */
	uint32	fref_sel_delay;
	uint32	slow_clk_ctl;		/* 5 < corerev < 10 */
	uint32	PAD;

	/* Instaclock registers (corerev >= 10) */
	uint32	system_clk_ctl;		/* 0xc0 */
	uint32	clkstatestretch;
	uint32	PAD[2];

	/* Indirect backplane access (corerev >= 22) */
	uint32	bp_addrlow;		/* 0xd0 */
	uint32	bp_addrhigh;
	uint32	bp_data;
	uint32	PAD;
	uint32	bp_indaccess;
	/* SPI registers, corerev >= 37 */
	uint32	gsioctrl;
	uint32	gsioaddress;
	uint32	gsiodata;

	/* More clock dividers (corerev >= 32) */
	uint32	clkdiv2;
	/* FAB ID (corerev >= 40) */
	uint32	otpcontrol1;
	uint32	fabid;			/* 0xf8 */

	/* In AI chips, pointer to erom */
	uint32	eromptr;		/* 0xfc */

	/* ExtBus control registers (corerev >= 3) */
	uint32	pcmcia_config;		/* 0x100 */
	uint32	pcmcia_memwait;
	uint32	pcmcia_attrwait;
	uint32	pcmcia_iowait;
	uint32	ide_config;
	uint32	ide_memwait;
	uint32	ide_attrwait;
	uint32	ide_iowait;
	uint32	prog_config;
	uint32	prog_waitcount;
	uint32	flash_config;
	uint32	flash_waitcount;
	uint32  SECI_config;		/* 0x130 SECI configuration */
	uint32	SECI_status;
	uint32	SECI_statusmask;
	uint32	SECI_rxnibchanged;

#if !defined(BCMDONGLEHOST)
	union {				/* 0x140 */
		/* Enhanced Coexistence Interface (ECI) registers (corerev >= 21) */
		struct eci_prerev35	lt35;
		struct eci_rev35	ge35;
		/* Other interfaces */
		struct flash_config	flashconf;
		uint32	PAD[20];
	} eci;
#else
	uint32	PAD[20];
#endif /* !defined(BCMDONGLEHOST) */

	/* SROM interface (corerev >= 32) */
	uint32	sromcontrol;		/* 0x190 */
	uint32	sromaddress;
	uint32	sromdata;
	uint32	PAD[1];				/* 0x19C */
	/* NAND flash registers for BCM4706 (corerev = 31) */
	uint32  nflashctrl;         /* 0x1a0 */
	uint32  nflashconf;
	uint32  nflashcoladdr;
	uint32  nflashrowaddr;
	uint32  nflashdata;
	uint32  nflashwaitcnt0;		/* 0x1b4 */
	uint32  PAD[2];

	uint32  seci_uart_data;		/* 0x1C0 */
	uint32  seci_uart_bauddiv;
	uint32  seci_uart_fcr;
	uint32  seci_uart_lcr;
	uint32  seci_uart_mcr;
	uint32  seci_uart_lsr;
	uint32  seci_uart_msr;
	uint32  seci_uart_baudadj;
	/* Clock control and hardware workarounds (corerev >= 20) */
	uint32	clk_ctl_st;		/* 0x1e0 */
	uint32	hw_war;
	uint32  powerctl;		/* 0x1e8 */
	uint32  powerctl2;		/* 0x1ec */
	uint32  PAD[68];

	/* UARTs */
	uint8	uart0data;		/* 0x300 */
	uint8	uart0imr;
	uint8	uart0fcr;
	uint8	uart0lcr;
	uint8	uart0mcr;
	uint8	uart0lsr;
	uint8	uart0msr;
	uint8	uart0scratch;
	uint8	PAD[184];		/* corerev >= 65 */
	uint32	rng_ctrl_0;		/* 0x3c0 */
	uint32	rng_rng_soft_reset;	/* 0x3c4 */
	uint32	rng_rbg_soft_reset;	/* 0x3c8 */
	uint32	rng_total_bit_cnt;	/* 0x3cc */
	uint32	rng_total_bit_thrshld;	/* 0x3d0 */
	uint32	rng_rev_id;		/* 0x3d4 */
	uint32	rng_int_status_0;	/* 0x3d8 */
	uint32	rng_int_enable_0;	/* 0x3dc */
	uint32	rng_fifo_data;		/* 0x3e0 */
	uint32	rng_fifo_cnt;		/* 0x3e4 */
	uint8	PAD[24];		/* corerev >= 65 */

	uint8	uart1data;		/* 0x400 */
	uint8	uart1imr;
	uint8	uart1fcr;
	uint8	uart1lcr;
	uint8	uart1mcr;
	uint8	uart1lsr;
	uint8	uart1msr;
	uint8	uart1scratch;		/* 0x407 */
	uint32	PAD[50];
	uint32	sr_memrw_addr;		/* 0x4d0 */
	uint32	sr_memrw_data;		/* 0x4d4 */
	uint32	etbmemctrl;		/* 0x4d8 */
	uint32	PAD[9];

	/* save/restore, corerev >= 48 */
	uint32	sr_capability;		/* 0x500 */
	uint32	sr_control0;		/* 0x504 */
	uint32	sr_control1;		/* 0x508 */
	uint32  gpio_control;		/* 0x50C */
	uint32	PAD[29];
	/* 2 SR engines case */
	uint32	sr1_control0;		/* 0x584 */
	uint32	sr1_control1;		/* 0x588 */
	uint32	PAD[29];
	/* PMU registers (corerev >= 20) */
	/* Note: all timers driven by ILP clock are updated asynchronously to HT/ALP.
	 * The CPU must read them twice, compare, and retry if different.
	 */
	uint32	pmucontrol;		/* 0x600 */
	uint32	pmucapabilities;
	uint32	pmustatus;
	uint32	res_state;
	uint32	res_pending;
	uint32	pmutimer;
	uint32	min_res_mask;
	uint32	max_res_mask;
	uint32	res_table_sel;
	uint32	res_dep_mask;
	uint32	res_updn_timer;
	uint32	res_timer;
	uint32	clkstretch;
	uint32	pmuwatchdog;
	uint32	gpiosel;		/* 0x638, rev >= 1 */
	uint32	gpioenable;		/* 0x63c, rev >= 1 */
	uint32	res_req_timer_sel;
	uint32	res_req_timer;
	uint32	res_req_mask;
	uint32	core_cap_ext;		/* 0x64c */
	uint32	chipcontrol_addr;	/* 0x650 */
	uint32	chipcontrol_data;	/* 0x654 */
	uint32	regcontrol_addr;
	uint32	regcontrol_data;
	uint32	pllcontrol_addr;
	uint32	pllcontrol_data;
	uint32	pmustrapopt;		/* 0x668, corerev >= 28 */
	uint32	pmu_xtalfreq;		/* 0x66C, pmurev >= 10 */
	uint32  retention_ctl;		/* 0x670 */
	uint32	ILPPeriod;		/* 0x674 */
	uint32  PAD[2];
	uint32  retention_grpidx;	/* 0x680 */
	uint32  retention_grpctl;	/* 0x684 */
	uint32  mac_res_req_timer;	/* 0x688 */
	uint32  mac_res_req_mask;	/* 0x68c */
	uint32  PAD[18];
	uint32	pmucontrol_ext;		/* 0x6d8 */
	uint32	slowclkperiod;		/* 0x6dc */
	uint32	pmu_statstimer_addr;	/* 0x6e0 */
	uint32	pmu_statstimer_ctrl;	/* 0x6e4 */
	uint32	pmu_statstimer_N;	/* 0x6e8 */
	uint32	PAD[1];
	uint32  mac_res_req_timer1;	/* 0x6f0 */
	uint32  mac_res_req_mask1;	/* 0x6f4 */
	uint32	PAD[2];
	uint32	pmuintmask0;		/* 0x700 */
	uint32	pmuintmask1;		/* 0x704 */
	uint32  PAD[14];
	uint32  pmuintstatus;		/* 0x740 */
	uint32  extwakeupstatus;	/* 0x744 */
	uint32	PAD[6];
	uint32  extwakemask0;		/* 0x760 */
	uint32	extwakemask1;		/* 0x764 */
	uint32	PAD[2];			/* 0x768-0x76C */
	uint32	extwakereqmask[2];	/* 0x770-0x774 */
	uint32	PAD[2];			/* 0x778-0x77C */
	uint32  pmuintctrl0;		/* 0x780 */
	uint32  PAD[3];			/* 0x784 - 0x78c */
	uint32  extwakectrl[1];		/* 0x790 */
	uint32  PAD[PADSZ(0x794u, 0x7b0u)];	/* 0x794 - 0x7b0 */
	uint32  fis_ctrl_status;	/* 0x7b4 */
	uint32  fis_min_res_mask;	/* 0x7b8 */
	uint32  PAD[PADSZ(0x7bcu, 0x7bcu)];	/* 0x7bc */
	uint32	precision_tmr_ctrl_status;	/* 0x7c0 */
	uint32	precision_tmr_capture_low;	/* 0x7c4 */
	uint32	precision_tmr_capture_high;	/* 0x7c8 */
	uint32	precision_tmr_capture_frac;	/* 0x7cc */
	uint32	precision_tmr_running_low;	/* 0x7d0 */
	uint32	precision_tmr_running_high;	/* 0x7d4 */
	uint32	precision_tmr_running_frac;	/* 0x7d8 */
	uint32  PAD[PADSZ(0x7dcu, 0x7e4u)];	/* 0x7dc - 0x7e4 */
	uint32  core_cap_ext1;			/* 0x7e8 */
	uint32  PAD[PADSZ(0x7ecu, 0x7fcu)];	/* 0x7ec - 0x7fc */

	uint16	sromotp[512];		/* 0x800 */
#ifdef CCNFLASH_SUPPORT
	/* Nand flash MLC controller registers (corerev >= 38) */
	uint32	nand_revision;		/* 0xC00 */
	uint32	nand_cmd_start;
	uint32	nand_cmd_addr_x;
	uint32	nand_cmd_addr;
	uint32	nand_cmd_end_addr;
	uint32	nand_cs_nand_select;
	uint32	nand_cs_nand_xor;
	uint32	PAD;
	uint32	nand_spare_rd0;
	uint32	nand_spare_rd4;
	uint32	nand_spare_rd8;
	uint32	nand_spare_rd12;
	uint32	nand_spare_wr0;
	uint32	nand_spare_wr4;
	uint32	nand_spare_wr8;
	uint32	nand_spare_wr12;
	uint32	nand_acc_control;
	uint32	PAD;
	uint32	nand_config;
	uint32	PAD;
	uint32	nand_timing_1;
	uint32	nand_timing_2;
	uint32	nand_semaphore;
	uint32	PAD;
	uint32	nand_devid;
	uint32	nand_devid_x;
	uint32	nand_block_lock_status;
	uint32	nand_intfc_status;
	uint32	nand_ecc_corr_addr_x;
	uint32	nand_ecc_corr_addr;
	uint32	nand_ecc_unc_addr_x;
	uint32	nand_ecc_unc_addr;
	uint32	nand_read_error_count;
	uint32	nand_corr_stat_threshold;
	uint32	PAD[2];
	uint32	nand_read_addr_x;
	uint32	nand_read_addr;
	uint32	nand_page_program_addr_x;
	uint32	nand_page_program_addr;
	uint32	nand_copy_back_addr_x;
	uint32	nand_copy_back_addr;
	uint32	nand_block_erase_addr_x;
	uint32	nand_block_erase_addr;
	uint32	nand_inv_read_addr_x;
	uint32	nand_inv_read_addr;
	uint32	PAD[2];
	uint32	nand_blk_wr_protect;
	uint32	PAD[3];
	uint32	nand_acc_control_cs1;
	uint32	nand_config_cs1;
	uint32	nand_timing_1_cs1;
	uint32	nand_timing_2_cs1;
	uint32	PAD[20];
	uint32	nand_spare_rd16;
	uint32	nand_spare_rd20;
	uint32	nand_spare_rd24;
	uint32	nand_spare_rd28;
	uint32	nand_cache_addr;
	uint32	nand_cache_data;
	uint32	nand_ctrl_config;
	uint32	nand_ctrl_status;
#endif /* CCNFLASH_SUPPORT */
	/* Note: there is a clash between GCI and NFLASH. So,
	* we decided to  have it like below. the functions accessing following
	* have to be protected with NFLASH_SUPPORT. The functions will
	* assert in case the clash happens.
	*/
	uint32  gci_corecaps0; /* GCI starting at 0xC00 */
	uint32  gci_corecaps1;
	uint32  gci_corecaps2;
	uint32  gci_corectrl;
	uint32  gci_corestat; /* 0xC10 */
	uint32  gci_intstat; /* 0xC14 */
	uint32  gci_intmask; /* 0xC18 */
	uint32  gci_wakemask; /* 0xC1C */
	uint32  gci_levelintstat; /* 0xC20 */
	uint32  gci_eventintstat; /* 0xC24 */
	uint32  PAD[6];
	uint32  gci_indirect_addr; /* 0xC40 */
	uint32  gci_gpioctl; /* 0xC44 */
	uint32	gci_gpiostatus;
	uint32  gci_gpiomask; /* 0xC4C */
	uint32  gci_eventsummary; /* 0xC50 */
	uint32  gci_miscctl; /* 0xC54 */
	uint32	gci_gpiointmask;
	uint32	gci_gpiowakemask;
	uint32  gci_input[32]; /* C60 */
	uint32  gci_event[32]; /* CE0 */
	uint32  gci_output[4]; /* D60 */
	uint32  gci_control_0; /* 0xD70 */
	uint32  gci_control_1; /* 0xD74 */
	uint32  gci_intpolreg; /* 0xD78 */
	uint32  gci_levelintmask; /* 0xD7C */
	uint32  gci_eventintmask; /* 0xD80 */
	uint32  PAD[3];
	uint32  gci_inbandlevelintmask; /* 0xD90 */
	uint32  gci_inbandeventintmask; /* 0xD94 */
	uint32  PAD[2];
	uint32  gci_seciauxtx; /* 0xDA0 */
	uint32  gci_seciauxrx; /* 0xDA4 */
	uint32  gci_secitx_datatag; /* 0xDA8 */
	uint32  gci_secirx_datatag; /* 0xDAC */
	uint32  gci_secitx_datamask; /* 0xDB0 */
	uint32  gci_seciusef0tx_reg; /* 0xDB4 */
	uint32  gci_secif0tx_offset; /* 0xDB8 */
	uint32  gci_secif0rx_offset; /* 0xDBC */
	uint32  gci_secif1tx_offset; /* 0xDC0 */
	uint32	gci_rxfifo_common_ctrl; /* 0xDC4 */
	uint32	gci_rxfifoctrl; /* 0xDC8 */
	uint32	gci_uartreadid; /* DCC */
	uint32  gci_seciuartescval; /* DD0 */
	uint32	PAD;
	uint32	gci_secififolevel; /* DD8 */
	uint32	gci_seciuartdata; /* DDC */
	uint32  gci_secibauddiv; /* DE0 */
	uint32  gci_secifcr; /* DE4 */
	uint32  gci_secilcr; /* DE8 */
	uint32  gci_secimcr; /* DEC */
	uint32	gci_secilsr; /* DF0 */
	uint32	gci_secimsr; /* DF4 */
	uint32  gci_baudadj; /* DF8 */
	uint32  PAD;
	uint32  gci_chipctrl; /* 0xE00 */
	uint32  gci_chipsts; /* 0xE04 */
	uint32	gci_gpioout; /* 0xE08 */
	uint32	gci_gpioout_read; /* 0xE0C */
	uint32	gci_mpwaketx; /* 0xE10 */
	uint32	gci_mpwakedetect; /* 0xE14 */
	uint32	gci_seciin_ctrl; /* 0xE18 */
	uint32	gci_seciout_ctrl; /* 0xE1C */
	uint32	gci_seciin_auxfifo_en; /* 0xE20 */
	uint32	gci_seciout_txen_txbr; /* 0xE24 */
	uint32	gci_seciin_rxbrstatus; /* 0xE28 */
	uint32	gci_seciin_rxerrstatus; /* 0xE2C */
	uint32	gci_seciin_fcstatus; /* 0xE30 */
	uint32	gci_seciout_txstatus; /* 0xE34 */
	uint32	gci_seciout_txbrstatus; /* 0xE38 */

} chipcregs_t;

#endif /* !_LANGUAGE_ASSEMBLY && !__ASSEMBLY__ */

#if !defined(IL_BIGENDIAN)
#define	CC_CHIPID		0
#define	CC_CAPABILITIES		4
#define	CC_CHIPST		0x2c
#define	CC_EROMPTR		0xfc
#endif	/* IL_BIGENDIAN */

#define	CC_OTPST		0x10
#define	CC_INTSTATUS		0x20
#define	CC_INTMASK		0x24
#define	CC_JTAGCMD		0x30
#define	CC_JTAGIR		0x34
#define	CC_JTAGDR		0x38
#define	CC_JTAGCTRL		0x3c
#define	CC_GPIOPU		0x58
#define	CC_GPIOPD		0x5c
#define	CC_GPIOIN		0x60
#define	CC_GPIOOUT		0x64
#define	CC_GPIOOUTEN		0x68
#define	CC_GPIOCTRL		0x6c
#define	CC_GPIOPOL		0x70
#define	CC_GPIOINTM		0x74
#define	CC_GPIOEVENT		0x78
#define	CC_GPIOEVENTMASK	0x7c
#define	CC_WATCHDOG		0x80
#define	CC_GPIOEVENTPOL		0x84
#define	CC_CLKC_N		0x90
#define	CC_CLKC_M0		0x94
#define	CC_CLKC_M1		0x98
#define	CC_CLKC_M2		0x9c
#define	CC_CLKC_M3		0xa0
#define	CC_CLKDIV		0xa4
#define	CC_CAP_EXT		0xac
#define	CC_SYS_CLK_CTL		0xc0
#define CC_BP_ADRLOW            0xd0
#define CC_BP_ADRHI             0xd4
#define CC_BP_DATA              0xd8
#define CC_SCR_DHD_TO_BL        CC_BP_ADRHI
#define CC_SCR_BL_TO_DHD        CC_BP_ADRLOW
#define	CC_CLKDIV2		0xf0
#define	CC_CLK_CTL_ST		SI_CLK_CTL_ST
#define	PMU_CTL			0x600
#define	PMU_CAP			0x604
#define	PMU_ST			0x608
#define PMU_RES_STATE		0x60c
#define PMU_RES_PENDING		0x610
#define PMU_TIMER		0x614
#define	PMU_MIN_RES_MASK	0x618
#define	PMU_MAX_RES_MASK	0x61c
#define CC_CHIPCTL_ADDR         0x650
#define CC_CHIPCTL_DATA         0x654
#define PMU_REG_CONTROL_ADDR	0x658
#define PMU_REG_CONTROL_DATA	0x65C
#define PMU_PLL_CONTROL_ADDR	0x660
#define PMU_PLL_CONTROL_DATA	0x664
#define PMU_RSRC_CONTROL_MASK   0x7B0

#define CC_SROM_CTRL		0x190
#define CC_SROM_ADDRESS		0x194u
#define CC_SROM_DATA		0x198u
#define	CC_SROM_OTP		0x0800
#define CC_GCI_INDIRECT_ADDR_REG	0xC40
#define CC_GCI_CHIP_CTRL_REG	0xE00
#define CC_GCI_CC_OFFSET_2	2
#define CC_GCI_CC_OFFSET_5	5
#define CC_SWD_CTRL		0x380
#define CC_SWD_REQACK		0x384
#define CC_SWD_DATA		0x388
#define GPIO_SEL_0					0x00001111
#define GPIO_SEL_1					0x11110000
#define GPIO_SEL_8					0x00001111
#define GPIO_SEL_9					0x11110000

#define CHIPCTRLREG0 0x0
#define CHIPCTRLREG1 0x1
#define CHIPCTRLREG2 0x2
#define CHIPCTRLREG3 0x3
#define CHIPCTRLREG4 0x4
#define CHIPCTRLREG5 0x5
#define CHIPCTRLREG6 0x6
#define CHIPCTRLREG13 0xd
#define CHIPCTRLREG16 0x10
#define REGCTRLREG4 0x4
#define REGCTRLREG5 0x5
#define REGCTRLREG6 0x6
#define MINRESMASKREG 0x618
#define MAXRESMASKREG 0x61c
#define CHIPCTRLADDR 0x650
#define CHIPCTRLDATA 0x654
#define RSRCTABLEADDR 0x620
#define PMU_RES_DEP_MASK 0x624
#define RSRCUPDWNTIME 0x628
#define PMUREG_RESREQ_MASK 0x68c
#define PMUREG_RESREQ_TIMER 0x688
#define PMUREG_RESREQ_MASK1 0x6f4
#define PMUREG_RESREQ_TIMER1 0x6f0
#define EXT_LPO_AVAIL 0x100
#define LPO_SEL					(1 << 0)
#define CC_EXT_LPO_PU 0x200000
#define GC_EXT_LPO_PU 0x2
#define CC_INT_LPO_PU 0x100000
#define GC_INT_LPO_PU 0x1
#define EXT_LPO_SEL 0x8
#define INT_LPO_SEL 0x4
#define ENABLE_FINE_CBUCK_CTRL			(1 << 30)
#define REGCTRL5_PWM_AUTO_CTRL_MASK		0x007e0000
#define REGCTRL5_PWM_AUTO_CTRL_SHIFT		17
#define REGCTRL6_PWM_AUTO_CTRL_MASK		0x3fff0000
#define REGCTRL6_PWM_AUTO_CTRL_SHIFT		16
#define CC_BP_IND_ACCESS_START_SHIFT		9
#define CC_BP_IND_ACCESS_START_MASK		(1 << CC_BP_IND_ACCESS_START_SHIFT)
#define CC_BP_IND_ACCESS_RDWR_SHIFT		8
#define CC_BP_IND_ACCESS_RDWR_MASK		(1 << CC_BP_IND_ACCESS_RDWR_SHIFT)
#define CC_BP_IND_ACCESS_ERROR_SHIFT		10
#define CC_BP_IND_ACCESS_ERROR_MASK		(1 << CC_BP_IND_ACCESS_ERROR_SHIFT)
#define GC_BT_CTRL_UARTPADS_OVRD_EN		(1u << 1)

#define LPO_SEL_TIMEOUT 1000

#define LPO_FINAL_SEL_SHIFT 18

#define LHL_LPO1_SEL 0
#define LHL_LPO2_SEL 0x1
#define LHL_32k_SEL 0x2
#define LHL_EXT_SEL  0x3

#define EXTLPO_BUF_PD	0x40
#define LPO1_PD_EN	0x1
#define LPO1_PD_SEL	0x6
#define LPO1_PD_SEL_VAL	0x4
#define LPO2_PD_EN	0x8
#define LPO2_PD_SEL	0x30
#define LPO2_PD_SEL_VAL	0x20
#define OSC_32k_PD	0x80

#define LHL_CLK_DET_CTL_AD_CNTR_CLK_SEL	0x3

#define LHL_LPO_AUTO	0x0
#define LHL_LPO1_ENAB	0x1
#define LHL_LPO2_ENAB	0x2
#define LHL_OSC_32k_ENAB	0x3
#define LHL_EXT_LPO_ENAB	0x4
#define RADIO_LPO_ENAB 0x5

#define LHL_CLK_DET_CTL_ADR_LHL_CNTR_EN	0x4
#define LHL_CLK_DET_CTL_ADR_LHL_CNTR_CLR	0x8
#define LHL_CLK_DET_CNT		0xF0
#define LHL_CLK_DET_CNT_SHIFT   4
#define LPO_SEL_SHIFT		9

#define LHL_MAIN_CTL_ADR_FINAL_CLK_SEL	0x3C0000
#define LHL_MAIN_CTL_ADR_LHL_WLCLK_SEL	0x600

#define CLK_DET_CNT_THRESH	8

#ifdef SR_DEBUG
#define SUBCORE_POWER_ON 0x0001
#define PHY_POWER_ON 0x0010
#define VDDM_POWER_ON 0x0100
#define MEMLPLDO_POWER_ON 0x1000
#define SUBCORE_POWER_ON_CHK 0x00040000
#define PHY_POWER_ON_CHK 0x00080000
#define VDDM_POWER_ON_CHK 0x00100000
#define MEMLPLDO_POWER_ON_CHK 0x00200000
#endif /* SR_DEBUG */

#ifdef CCNFLASH_SUPPORT
/* NAND flash support */
#define CC_NAND_REVISION	0xC00
#define CC_NAND_CMD_START	0xC04
#define CC_NAND_CMD_ADDR	0xC0C
#define CC_NAND_SPARE_RD_0	0xC20
#define CC_NAND_SPARE_RD_4	0xC24
#define CC_NAND_SPARE_RD_8	0xC28
#define CC_NAND_SPARE_RD_C	0xC2C
#define CC_NAND_CONFIG		0xC48
#define CC_NAND_DEVID		0xC60
#define CC_NAND_DEVID_EXT	0xC64
#define CC_NAND_INTFC_STATUS	0xC6C
#endif /* CCNFLASH_SUPPORT */

/* chipid */
#define	CID_ID_MASK		0x0000ffff	/**< Chip Id mask */
#define	CID_REV_MASK		0x000f0000	/**< Chip Revision mask */
#define	CID_REV_SHIFT		16		/**< Chip Revision shift */
#define	CID_PKG_MASK		0x00f00000	/**< Package Option mask */
#define	CID_PKG_SHIFT		20		/**< Package Option shift */
#define	CID_CC_MASK		0x0f000000	/**< CoreCount (corerev >= 4) */
#define CID_CC_SHIFT		24
#define	CID_TYPE_MASK		0xf0000000	/**< Chip Type */
#define CID_TYPE_SHIFT		28

/* capabilities */
#define	CC_CAP_UARTS_MASK	0x00000003u	/**< Number of UARTs */
#define CC_CAP_MIPSEB		0x00000004u	/**< MIPS is in big-endian mode */
#define CC_CAP_UCLKSEL		0x00000018u	/**< UARTs clock select */
#define CC_CAP_UINTCLK		0x00000008u	/**< UARTs are driven by internal divided clock */
#define CC_CAP_UARTGPIO		0x00000020u	/**< UARTs own GPIOs 15:12 */
#define CC_CAP_EXTBUS_MASK	0x000000c0u	/**< External bus mask */
#define CC_CAP_EXTBUS_NONE	0x00000000u	/**< No ExtBus present */
#define CC_CAP_EXTBUS_FULL	0x00000040u	/**< ExtBus: PCMCIA, IDE & Prog */
#define CC_CAP_EXTBUS_PROG	0x00000080u	/**< ExtBus: ProgIf only */
#define	CC_CAP_FLASH_MASK	0x00000700u	/**< Type of flash */
#define	CC_CAP_PLL_MASK		0x00038000u	/**< Type of PLL */
#define CC_CAP_PWR_CTL		0x00040000u	/**< Power control */
#define CC_CAP_OTPSIZE		0x00380000u	/**< OTP Size (0 = none) */
#define CC_CAP_OTPSIZE_SHIFT	19		/**< OTP Size shift */
#define CC_CAP_OTPSIZE_BASE	5		/**< OTP Size base */
#define CC_CAP_JTAGP		0x00400000u	/**< JTAG Master Present */
#define CC_CAP_ROM		0x00800000u	/**< Internal boot rom active */
#define CC_CAP_BKPLN64		0x08000000u	/**< 64-bit backplane */
#define	CC_CAP_PMU		0x10000000u	/**< PMU Present, rev >= 20 */
#define	CC_CAP_ECI		0x20000000u	/**< ECI Present, rev >= 21 */
#define	CC_CAP_SROM		0x40000000u	/**< Srom Present, rev >= 32 */
#define	CC_CAP_NFLASH		0x80000000u	/**< Nand flash present, rev >= 35 */

#define	CC_CAP2_SECI		0x00000001u	/**< SECI Present, rev >= 36 */
#define	CC_CAP2_GSIO		0x00000002u	/**< GSIO (spi/i2c) present, rev >= 37 */

/* capabilities extension */
#define CC_CAP_EXT_SECI_PRESENT			0x00000001u	/**< SECI present */
#define CC_CAP_EXT_GSIO_PRESENT			0x00000002u	/**< GSIO present */
#define CC_CAP_EXT_GCI_PRESENT			0x00000004u	/**< GCI present */
#define CC_CAP_EXT_SECI_PUART_PRESENT		0x00000008u	/**< UART present */
#define CC_CAP_EXT_AOB_PRESENT			0x00000040u	/**< AOB present */
#define CC_CAP_EXT_SWD_PRESENT			0x00000400u	/**< SWD present */
#define CC_CAP_SR_AON_PRESENT			0x0001E000u	/**< SWD present */
#define CC_CAP_EXT1_DVFS_PRESENT		0x00001000u	/**< DVFS present */

/* DVFS core count */
#define	CC_CAP_EXT1_CORE_CNT_SHIFT	(7u)
#define	CC_CAP_EXT1_CORE_CNT_MASK	((0x1Fu) << CC_CAP_EXT1_CORE_CNT_SHIFT)

/* SpmCtrl (Chipcommon Offset 0x690)
 * Bits 27:16 AlpDiv
 *   Clock divider control for dividing ALP or TCK clock
 *   (bit 8 determines ALP vs TCK)
 * Bits 8 UseDivTck
 *   See UseDivAlp (bit 1) for more details
 * Bits 7:6 DebugMuxSel
 *   Controls the debug mux for SpmDebug register
 * Bits 5 IntPending
 *   This field is set to 1 when any of the bits in IntHiStatus or IntLoStatus
 *   is set. It is automatically cleared after reading and clearing the
 *   IntHiStatus and IntLoStatus registers. This bit is Read only.
 * Bits 4 SpmIdle
 *   Indicates whether the spm controller is running (SpmIdle=0) or in idle
 *   state (SpmIdle=1); Note that after setting Spmen=1 (or 0), it takes a
 *   few clock cycles (ILP or divided ALP) for SpmIdle to go to 0 (or 1).
 *   This bit is Read only.
 * Bits 3 RoDisOutput
 *   Debug register - gate off all the SPM ring oscillator clock outputs
 * Bits 2 RstSpm
 *   Reset spm controller.
 *   Put spm in reset before changing UseDivAlp and AlpDiv
 * Bits 1 UseDivAlp
 *   This field, along with UseDivTck, selects the clock as the reference clock
 *   Bits [UseDivTck,UseDivAlp]:
 *   00 - Use ILP clock as reference clock
 *   01 - Use divided ALP clock
 *   10 - Use divided jtag TCK
 * Bits 0 Spmen
 *   0 - SPM disabled
 *   1 - SPM enabled
 *   Program all the SPM controls before enabling spm. For one-shot operation,
 *   SpmIdle indicates when the one-shot run has completed. After one-shot
 *   completion, spmen needs to be disabled first before enabling again.
 */
#define SPMCTRL_ALPDIV_FUNC	0x1ffu
#define SPMCTRL_ALPDIV_RO	0xfffu
#define SPMCTRL_ALPDIV_SHIFT	16u
#define SPMCTRL_ALPDIV_MASK	(0xfffu << SPMCTRL_ALPDIV_SHIFT)
#define SPMCTRL_RSTSPM		0x1u
#define SPMCTRL_RSTSPM_SHIFT	2u
#define SPMCTRL_RSTSPM_MASK	(0x1u << SPMCTRL_RSTSPM_SHIFT)
#define SPMCTRL_USEDIVALP	0x1u
#define SPMCTRL_USEDIVALP_SHIFT	1u
#define SPMCTRL_USEDIVALP_MASK	(0x1u << SPMCTRL_USEDIVALP_SHIFT)
#define SPMCTRL_SPMEN		0x1u
#define SPMCTRL_SPMEN_SHIFT	0u
#define SPMCTRL_SPMEN_MASK	(0x1u << SPMCTRL_SPMEN_SHIFT)

/* SpmClkCtrl (Chipcommon Offset 0x698)
 * Bits 31 OneShot
 *   0 means Take periodic measurements based on IntervalValue
 *   1 means Take a one shot measurement
 *   when OneShot=1 IntervalValue determines the amount of time to wait before
 *   taking the measurement
 * Bits 30:28 ROClkprediv1
 *    ROClkprediv1 and ROClkprediv2 controls the clock dividers of the RO clk
 *    before it goes to the monitor
 *    The RO clk goes through prediv1, followed by prediv2
 *    prediv1:
 *      0 - no divide
 *      1 - divide by 2
 *      2 - divide by 4
 *      3 - divide by 8
 *      4 - divide by 16
 *      5 - divide by 32
 *    prediv2:
 *      0 - no divide
 *      1 to 15 - divide by (prediv2+1)
 */
#define SPMCLKCTRL_SAMPLETIME		0x2u
#define SPMCLKCTRL_SAMPLETIME_SHIFT	24u
#define SPMCLKCTRL_SAMPLETIME_MASK	(0xfu << SPMCLKCTRL_SAMPLETIME_SHIFT)
#define SPMCLKCTRL_ONESHOT		0x1u
#define SPMCLKCTRL_ONESHOT_SHIFT	31u
#define SPMCLKCTRL_ONESHOT_MASK		(0x1u << SPMCLKCTRL_ONESHOT_SHIFT)

/* MonCtrlN (Chipcommon Offset 0x6a8)
 * Bits 15:8 TargetRo
 *   The target ring oscillator to observe
 * Bits 7:6 TargetRoExt
 *   Extended select option to choose the target clock to monitor;
 *   00 - selects ring oscillator clock;
 *   10 - selects functional clock;
 *   11 - selects DFT clocks;
 *   Bits 15:8 (TargetRO) is used to select the specific RO or functional or
 *   DFT clock
 * Bits 3 intHiEn
 *   Interrupt hi enable (MonEn should be 1)
 * Bits 2 intLoEn
 *   Interrupt hi enable (MonEn should be 1)
 * Bits 1 HwEnable
 *   TBD
 * Bits 0 MonEn
 *   Enable monitor, interrupt and watermark functions
 */
#define MONCTRLN_TARGETRO_PMU_ALP_CLK		0u
#define MONCTRLN_TARGETRO_PCIE_ALP_CLK		1u
#define MONCTRLN_TARGETRO_CB_BP_CLK		2u
#define MONCTRLN_TARGETRO_ARMCR4_CLK_4387B0	3u
#define MONCTRLN_TARGETRO_ARMCR4_CLK_4387C0	20u
#define MONCTRLN_TARGETRO_SHIFT			8u
#define MONCTRLN_TARGETRO_MASK			(0xffu << MONCTRLN_TARGETRO_SHIFT)
#define MONCTRLN_TARGETROMAX			64u
#define MONCTRLN_TARGETROHI			32u
#define MONCTRLN_TARGETROEXT_RO			0x0u
#define MONCTRLN_TARGETROEXT_FUNC		0x2u
#define MONCTRLN_TARGETROEXT_DFT		0x3u
#define MONCTRLN_TARGETROEXT_SHIFT		6u
#define MONCTRLN_TARGETROEXT_MASK		(0x3u << MONCTRLN_TARGETROEXT_SHIFT)
#define MONCTRLN_MONEN				0x1u
#define MONCTRLN_MONEN_SHIFT			0u
#define MONCTRLN_MONEN_MASK			(0x1u << MONCTRLN_MONENEXT_SHIFT)

/* DvfsCoreCtrlN
 * Bits 10 Request_override_PDn
 *   When set, the dvfs_request logic for this core is overridden with the
 *   content in Request_val_PDn. This field is ignored when
 *   DVFSCtrl1.dvfs_req_override is set.
 * Bits 9:8 Request_val_PDn
 *   see Request_override_PDn description
 * Bits 4:0 DVFS_RsrcTrig_PDn
 *   Specifies the pmu resource that is used to trigger the DVFS request for
 *   this core request. Current plan is to use the appropriate PWRSW_* pmu
 *   resource each power domain / cores
 */
#define CTRLN_REQUEST_OVERRIDE_SHIFT	10u
#define CTRLN_REQUEST_OVERRIDE_MASK	(0x1u << CTRLN_REQUEST_OVERRIDE_SHIFT)
#define CTRLN_REQUEST_VAL_SHIFT		8u
#define CTRLN_REQUEST_VAL_MASK		(0x3u << CTRLN_REQUEST_VAL_SHIFT)
#define CTRLN_RSRC_TRIG_SHIFT           0u
#define CTRLN_RSRC_TRIG_MASK		(0x1Fu << CTRLN_RSRC_TRIG_SHIFT)
#define CTRLN_RSRC_TRIG_CHIPC		0x1Au
#define CTRLN_RSRC_TRIG_PCIE		0x1Au
#define CTRLN_RSRC_TRIG_ARM		0x8u
#define CTRLN_RSRC_TRIG_D11_MAIN	0xEu
#define CTRLN_RSRC_TRIG_D11_AUX		0xBu
#define CTRLN_RSRC_TRIG_D11_SCAN	0xCu
#define CTRLN_RSRC_TRIG_HWA		0x8u
#define CTRLN_RSRC_TRIG_BT_MAIN		0x9u
#define CTRLN_RSRC_TRIG_BT_SCAN		0xAu

/* DVFS core FW index	*/
#define DVFS_CORE_CHIPC			0u
#define DVFS_CORE_PCIE			1u
#define DVFS_CORE_ARM			2u
#define DVFS_CORE_D11_MAIN		3u
#define DVFS_CORE_D11_AUX		4u
#define DVFS_CORE_D11_SCAN		5u
#define DVFS_CORE_BT_MAIN		6u
#define DVFS_CORE_BT_SCAN		7u
#define DVFS_CORE_HWA			8u
#define DVFS_CORE_SYSMEM		((PMUREV((sih)->pmurev) < 43u) ? \
						9u : 8u)
#define DVFS_CORE_MASK			0xFu

#define DVFS_CORE_INVALID_IDX		0xFFu

/* DVFS_Ctrl2 (PMU_BASE + 0x814)
 * Bits 31:28 Voltage ramp down step
 *   Voltage increment amount during ramp down (10mv units)
 * Bits 27:24 Voltage ramp up step
 *   Voltage increment amount during ramp up (10mv units)
 * Bits 23:16 Voltage ramp down interval
 *   Number of clocks to wait during each voltage decrement
 * Bits 15:8 Voltage ramp up interval
 *   Number of clocks to wait during each voltage increment
 * Bits 7:0 Clock stable time
 *   Number of clocks to wait after dvfs_clk_sel is asserted
 */
#define DVFS_VOLTAGE_RAMP_DOWN_STEP		1u
#define DVFS_VOLTAGE_RAMP_DOWN_STEP_SHIFT	28u
#define DVFS_VOLTAGE_RAMP_DOWN_STEP_MASK	(0xFu << DVFS_VOLTAGE_RAMP_DOWN_STEP_SHIFT)
#define DVFS_VOLTAGE_RAMP_UP_STEP		1u
#define DVFS_VOLTAGE_RAMP_UP_STEP_SHIFT		24u
#define DVFS_VOLTAGE_RAMP_UP_STEP_MASK		(0xFu << DVFS_VOLTAGE_RAMP_UP_STEP_SHIFT)
#define DVFS_VOLTAGE_RAMP_DOWN_INTERVAL		1u
#define DVFS_VOLTAGE_RAMP_DOWN_INTERVAL_SHIFT	16u
#define DVFS_VOLTAGE_RAMP_DOWN_INTERVAL_MASK	(0xFFu << DVFS_VOLTAGE_RAMP_DOWN_INTERVAL_SHIFT)
#define DVFS_VOLTAGE_RAMP_UP_INTERVAL		1u
#define DVFS_VOLTAGE_RAMP_UP_INTERVAL_SHIFT	8u
#define DVFS_VOLTAGE_RAMP_UP_INTERVAL_MASK	(0xFFu << DVFS_VOLTAGE_RAMP_UP_INTERVAL_SHIFT)
#define DVFS_CLOCK_STABLE_TIME			3u
#define DVFS_CLOCK_STABLE_TIME_SHIFT		0
#define DVFS_CLOCK_STABLE_TIME_MASK		(0xFFu << DVFS_CLOCK_STABLE_TIME_SHIFT)

/* DVFS_Voltage (PMU_BASE + 0x818)
 * Bits 22:16 HDV Voltage
 *   Specifies the target HDV voltage in 10mv units
 * Bits 14:8 NDV Voltage
 *   Specifies the target NDV voltage in 10mv units
 * Bits 6:0 LDV Voltage
 *   Specifies the target LDV voltage in 10mv units
 */
#define DVFS_VOLTAGE_XDV		0u	/* Reserved */
#ifdef WL_INITVALS
#define DVFS_VOLTAGE_HDV		(wliv_pmu_dvfs_voltage_hdv)	/* 0.72V */
#define DVFS_VOLTAGE_HDV_MAX		(wliv_pmu_dvfs_voltage_hdv_max)	/* 0.80V */
#else
#define DVFS_VOLTAGE_HDV		72u	/* 0.72V */
#define DVFS_VOLTAGE_HDV_MAX		80u	/* 0.80V */
#endif
#define DVFS_VOLTAGE_HDV_PWR_OPT	68u	/* 0.68V */
#define DVFS_VOLTAGE_HDV_SHIFT		16u
#define DVFS_VOLTAGE_HDV_MASK		(0x7Fu << DVFS_VOLTAGE_HDV_SHIFT)
#ifdef WL_INITVALS
#define DVFS_VOLTAGE_NDV		(wliv_pmu_dvfs_voltage_ndv)		/* 0.72V */
#define DVFS_VOLTAGE_NDV_NON_LVM	(wliv_pmu_dvfs_voltage_ndv_non_lvm)	/* 0.76V */
#define DVFS_VOLTAGE_NDV_MAX		(wliv_pmu_dvfs_voltage_ndv_max)		/* 0.80V */
#else
#define DVFS_VOLTAGE_NDV		72u	/* 0.72V */
#define DVFS_VOLTAGE_NDV_NON_LVM	76u	/* 0.76V */
#define DVFS_VOLTAGE_NDV_MAX		80u	/* 0.80V */
#endif
#define DVFS_VOLTAGE_NDV_PWR_OPT	68u	/* 0.68V */
#define DVFS_VOLTAGE_NDV_SHIFT		8u
#define DVFS_VOLTAGE_NDV_MASK		(0x7Fu << DVFS_VOLTAGE_NDV_SHIFT)
#ifdef WL_INITVALS
#define DVFS_VOLTAGE_LDV		(wliv_pmu_dvfs_voltage_ldv)	/* 0.65V */
#else
#define DVFS_VOLTAGE_LDV		65u	/* 0.65V */
#endif
#define DVFS_VOLTAGE_LDV_PWR_OPT	65u	/* 0.65V */
#define DVFS_VOLTAGE_LDV_SHIFT		0u
#define DVFS_VOLTAGE_LDV_MASK		(0x7Fu << DVFS_VOLTAGE_LDV_SHIFT)

/* DVFS_Status (PMU_BASE + 0x81C)
 * Bits 27:26 Raw_Core_Reqn
 * Bits 25:24 Active_Core_Reqn
 * Bits 12:11 Core_dvfs_status
 * Bits 9:8 Dvfs_clk_sel
 *   00 - LDV
 *   01 - NDV
 * Bits 6:0 Dvfs Voltage
 *   The real time voltage that is being output from the dvfs controller
 */
#define DVFS_RAW_CORE_REQ_SHIFT	26u
#define DVFS_RAW_CORE_REQ_MASK	(0x3u << DVFS_RAW_CORE_REQ_SHIFT)
#define DVFS_ACT_CORE_REQ_SHIFT	24u
#define DVFS_ACT_CORE_REQ_MASK	(0x3u << DVFS_ACT_CORE_REQ_SHIFT)
#define DVFS_CORE_STATUS_SHIFT	11u
#define DVFS_CORE_STATUS_MASK	(0x3u << DVFS_CORE_STATUS_SHIFT)
#define DVFS_CLK_SEL_SHIFT	8u
#define DVFS_CLK_SEL_MASK	(0x3u << DVFS_CLK_SEL_SHIFT)
#define DVFS_VOLTAGE_SHIFT	0u
#define DVFS_VOLTAGE_MASK	(0x7Fu << DVFS_VOLTAGE_SHIFT)

/* DVFS_Ctrl1 (PMU_BASE + 0x810)
 * Bits 0 Enable DVFS
 *   This bit will enable DVFS operation. When cleared, the complete DVFS
 *   controller is bypassed and DVFS_voltage output will be the contents of
 *   NDV voltage register
 */
#define DVFS_DISABLE_DVFS	0u
#define DVFS_ENABLE_DVFS	1u
#define DVFS_ENABLE_DVFS_SHIFT	0u
#define DVFS_ENABLE_DVFS_MASK	(1u << DVFS_ENABLE_DVFS_SHIFT)

#define DVFS_LPO_DELAY		40u	/* usec (1 LPO clock + margin) */
#define DVFS_FASTLPO_DELAY	2u	/* usec (1 FAST_LPO clock + margin) */
#define DVFS_NDV_LPO_DELAY	1500u
#define DVFS_NDV_FASTLPO_DELAY	50u

#if defined(BCM_FASTLPO) && !defined(BCM_FASTLPO_DISABLED)
#define DVFS_DELAY	DVFS_FASTLPO_DELAY
#define DVFS_NDV_DELAY	DVFS_NDV_FASTLPO_DELAY
#else
#define DVFS_DELAY	DVFS_LPO_DELAY
#define DVFS_NDV_DELAY	DVFS_NDV_LPO_DELAY
#endif /* BCM_FASTLPO && !BCM_FASTLPO_DISABLED */

#define DVFS_LDV	0u
#define DVFS_NDV	1u
#define DVFS_HDV	2u

/* PowerControl2 (Core Offset 0x1EC)
 * Bits 17:16 DVFSStatus
 *   This 2-bit field is the DVFS voltage status mapped as
 *   00 - LDV
 *   01 - NDV
 *   10 - HDV
 * Bits 1:0 DVFSRequest
 *   This 2-bit field is used to request DVFS voltage mapped as shown above
 */
#define DVFS_REQ_LDV		DVFS_LDV
#define DVFS_REQ_NDV		DVFS_NDV
#define DVFS_REQ_HDV		DVFS_HDV
#define DVFS_REQ_SHIFT		0u
#define DVFS_REQ_MASK		(0x3u << DVFS_REQ_SHIFT)
#define DVFS_STATUS_SHIFT	16u
#define DVFS_STATUS_MASK	(0x3u << DVFS_STATUS_SHIFT)

/* GCI Chip Control 16 Register
 * Bits 0 CB Clock sel
 *   0 - 160MHz
 *   1 - 80Mhz  - BT can force CB backplane clock to 80Mhz when wl is down
 */
#define GCI_CC16_CB_CLOCK_SEL_160	0u
#define GCI_CC16_CB_CLOCK_SEL_80	1u
#define GCI_CC16_CB_CLOCK_SEL_SHIFT	0u
#define GCI_CC16_CB_CLOCK_SEL_MASK	(0x1u << GCI_CC16_CB_CLOCK_SEL_SHIFT)
#define GCI_CHIPCTRL_16_PRISEL_ANT_MASK_PSM_OVR	(1 << 8)

/* WL Channel Info to BT via GCI - bits 40 - 47 */
#define GCI_WL_CHN_INFO_MASK	(0xFF00)
/* WL indication of MCHAN enabled/disabled to BT - bit 36 */
#define GCI_WL_MCHAN_BIT_MASK	(0x0010)

#ifdef WLC_SW_DIVERSITY
/* WL indication of SWDIV enabled/disabled to BT - bit 33 */
#define GCI_WL_SWDIV_ANT_VALID_BIT_MASK	(0x0002)
#define GCI_SWDIV_ANT_VALID_SHIFT 0x1
#define GCI_SWDIV_ANT_VALID_DISABLE 0x0
#endif

/* Indicate to BT that WL is scheduling ACL based ble scan grant */
#define GCI_WL2BT_ACL_BSD_BLE_SCAN_GRNT_MASK 0x8000000
/* WLAN is awake Indicate to BT */
#define GCI_WL2BT_2G_AWAKE_MASK	  (1u << 28u)

/* WL inidcation of Aux Core 2G hibernate status - bit 50 */
#define GCI_WL2BT_2G_HIB_STATE_MASK	(0x0040000u)

/* WL Traffic Indication  to BT */
#define GCI_WL2BT_TRAFFIC_IND_SHIFT	(12)
#define GCI_WL2BT_TRAFFIC_IND_MASK	(0x3 << GCI_WL2BT_TRAFFIC_IND_SHIFT)

/* WL Strobe to BT */
#define GCI_WL_STROBE_BIT_MASK	(0x0020)
/* bits [51:48] - reserved for wlan TX pwr index */
/* bits [55:52] btc mode indication */
#define GCI_WL_BTC_MODE_SHIFT	(20)
#define GCI_WL_BTC_MODE_MASK	(0xF << GCI_WL_BTC_MODE_SHIFT)
#define GCI_WL_ANT_BIT_MASK	(0x00c0)
#define GCI_WL_ANT_SHIFT_BITS	(6)

/* bit [40] - to indicate RC2CX mode to BT */
#define GCI_WL_RC2CX_PERCTS_MASK	0x00000100u

/* PLL type */
#define PLL_NONE		0x00000000
#define PLL_TYPE1		0x00010000	/**< 48MHz base, 3 dividers */
#define PLL_TYPE2		0x00020000	/**< 48MHz, 4 dividers */
#define PLL_TYPE3		0x00030000	/**< 25MHz, 2 dividers */
#define PLL_TYPE4		0x00008000	/**< 48MHz, 4 dividers */
#define PLL_TYPE5		0x00018000	/**< 25MHz, 4 dividers */
#define PLL_TYPE6		0x00028000	/**< 100/200 or 120/240 only */
#define PLL_TYPE7		0x00038000	/**< 25MHz, 4 dividers */

/* ILP clock */
#define	ILP_CLOCK		32000

/* ALP clock on pre-PMU chips */
#define	ALP_CLOCK		20000000

#ifdef CFG_SIM
#define NS_ALP_CLOCK		84922
#define NS_SLOW_ALP_CLOCK	84922
#define NS_CPU_CLOCK		534500
#define NS_SLOW_CPU_CLOCK	534500
#define NS_SI_CLOCK		271750
#define NS_SLOW_SI_CLOCK	271750
#define NS_FAST_MEM_CLOCK	271750
#define NS_MEM_CLOCK		271750
#define NS_SLOW_MEM_CLOCK	271750
#else
#define NS_ALP_CLOCK		125000000
#define NS_SLOW_ALP_CLOCK	100000000
#define NS_CPU_CLOCK		1000000000
#define NS_SLOW_CPU_CLOCK	800000000
#define NS_SI_CLOCK		250000000
#define NS_SLOW_SI_CLOCK	200000000
#define NS_FAST_MEM_CLOCK	800000000
#define NS_MEM_CLOCK		533000000
#define NS_SLOW_MEM_CLOCK	400000000
#endif /* CFG_SIM */

/* HT clock */
#define	HT_CLOCK		80000000

/* corecontrol */
#define CC_UARTCLKO		0x00000001	/**< Drive UART with internal clock */
#define	CC_SE			0x00000002	/**< sync clk out enable (corerev >= 3) */
#define CC_ASYNCGPIO	0x00000004	/**< 1=generate GPIO interrupt without backplane clock */
#define CC_UARTCLKEN		0x00000008	/**< enable UART Clock (corerev > = 21 */
#define CC_RBG_RESET		0x00000040	/**< Reset RBG block (corerev > = 65 */

/* retention_ctl */
#define RCTL_MEM_RET_SLEEP_LOG_SHIFT	29
#define RCTL_MEM_RET_SLEEP_LOG_MASK	(1 << RCTL_MEM_RET_SLEEP_LOG_SHIFT)

/* 4321 chipcontrol */
#define CHIPCTRL_4321_PLL_DOWN	0x800000	/**< serdes PLL down override */

/* Fields in the otpstatus register in rev >= 21 */
#define OTPS_OL_MASK		0x000000ff
#define OTPS_OL_MFG		0x00000001	/**< manuf row is locked */
#define OTPS_OL_OR1		0x00000002	/**< otp redundancy row 1 is locked */
#define OTPS_OL_OR2		0x00000004	/**< otp redundancy row 2 is locked */
#define OTPS_OL_GU		0x00000008	/**< general use region is locked */
#define OTPS_GUP_MASK		0x00000f00
#define OTPS_GUP_SHIFT		8
#define OTPS_GUP_HW		0x00000100	/**< h/w subregion is programmed */
#define OTPS_GUP_SW		0x00000200	/**< s/w subregion is programmed */
#define OTPS_GUP_CI		0x00000400	/**< chipid/pkgopt subregion is programmed */
#define OTPS_GUP_FUSE		0x00000800	/**< fuse subregion is programmed */
#define OTPS_READY		0x00001000
#define OTPS_RV(x)		(1 << (16 + (x)))	/**< redundancy entry valid */
#define OTPS_RV_MASK		0x0fff0000
#define OTPS_PROGOK     0x40000000

/* Fields in the otpcontrol register in rev >= 21 */
#define OTPC_PROGSEL		0x00000001
#define OTPC_PCOUNT_MASK	0x0000000e
#define OTPC_PCOUNT_SHIFT	1
#define OTPC_VSEL_MASK		0x000000f0
#define OTPC_VSEL_SHIFT		4
#define OTPC_TMM_MASK		0x00000700
#define OTPC_TMM_SHIFT		8
#define OTPC_ODM		0x00000800
#define OTPC_PROGEN		0x80000000

/* Fields in the 40nm otpcontrol register in rev >= 40 */
#define OTPC_40NM_PROGSEL_SHIFT	0
#define OTPC_40NM_PCOUNT_SHIFT	1
#define OTPC_40NM_PCOUNT_WR	0xA
#define OTPC_40NM_PCOUNT_V1X	0xB
#define OTPC_40NM_REGCSEL_SHIFT	5
#define OTPC_40NM_REGCSEL_DEF	0x4
#define OTPC_40NM_PROGIN_SHIFT	8
#define OTPC_40NM_R2X_SHIFT	10
#define OTPC_40NM_ODM_SHIFT	11
#define OTPC_40NM_DF_SHIFT	15
#define OTPC_40NM_VSEL_SHIFT	16
#define OTPC_40NM_VSEL_WR	0xA
#define OTPC_40NM_VSEL_V1X	0xA
#define OTPC_40NM_VSEL_R1X	0x5
#define OTPC_40NM_COFAIL_SHIFT	30

#define OTPC1_CPCSEL_SHIFT	0
#define OTPC1_CPCSEL_DEF	6
#define OTPC1_TM_SHIFT		8
#define OTPC1_TM_WR		0x84
#define OTPC1_TM_V1X		0x84
#define OTPC1_TM_R1X		0x4
#define OTPC1_CLK_EN_MASK	0x00020000
#define OTPC1_CLK_DIV_MASK	0x00FC0000

/* Fields in otpprog in rev >= 21 and HND OTP */
#define OTPP_COL_MASK		0x000000ff
#define OTPP_COL_SHIFT		0
#define OTPP_ROW_MASK		0x0000ff00
#define OTPP_ROW_MASK9		0x0001ff00		/* for ccrev >= 49 */
#define OTPP_ROW_SHIFT		8
#define OTPP_OC_MASK		0x0f000000
#define OTPP_OC_SHIFT		24
#define OTPP_READERR		0x10000000
#define OTPP_VALUE_MASK		0x20000000
#define OTPP_VALUE_SHIFT	29
#define OTPP_START_BUSY		0x80000000
#define	OTPP_READ		0x40000000	/* HND OTP */

/* Fields in otplayout register */
#define OTPL_HWRGN_OFF_MASK	0x00000FFF
#define OTPL_HWRGN_OFF_SHIFT	0
#define OTPL_WRAP_REVID_MASK	0x00F80000
#define OTPL_WRAP_REVID_SHIFT	19
#define OTPL_WRAP_TYPE_MASK	0x00070000
#define OTPL_WRAP_TYPE_SHIFT	16
#define OTPL_WRAP_TYPE_65NM	0
#define OTPL_WRAP_TYPE_40NM	1
#define OTPL_WRAP_TYPE_28NM	2
#define OTPL_WRAP_TYPE_16NM	3
#define OTPL_WRAP_TYPE_7NM	4
#define OTPL_ROW_SIZE_MASK	0x0000F000
#define OTPL_ROW_SIZE_SHIFT	12

/* otplayout reg corerev >= 36 */
#define OTP_CISFORMAT_NEW	0x80000000

/* Opcodes for OTPP_OC field */
#define OTPPOC_READ		0
#define OTPPOC_BIT_PROG		1
#define OTPPOC_VERIFY		3
#define OTPPOC_INIT		4
#define OTPPOC_SET		5
#define OTPPOC_RESET		6
#define OTPPOC_OCST		7
#define OTPPOC_ROW_LOCK		8
#define OTPPOC_PRESCN_TEST	9

/* Opcodes for OTPP_OC field (40NM) */
#define OTPPOC_READ_40NM	0
#define OTPPOC_PROG_ENABLE_40NM 1
#define OTPPOC_PROG_DISABLE_40NM	2
#define OTPPOC_VERIFY_40NM	3
#define OTPPOC_WORD_VERIFY_1_40NM	4
#define OTPPOC_ROW_LOCK_40NM	5
#define OTPPOC_STBY_40NM	6
#define OTPPOC_WAKEUP_40NM	7
#define OTPPOC_WORD_VERIFY_0_40NM	8
#define OTPPOC_PRESCN_TEST_40NM 9
#define OTPPOC_BIT_PROG_40NM	10
#define OTPPOC_WORDPROG_40NM	11
#define OTPPOC_BURNIN_40NM	12
#define OTPPOC_AUTORELOAD_40NM	13
#define OTPPOC_OVST_READ_40NM	14
#define OTPPOC_OVST_PROG_40NM	15

/* Opcodes for OTPP_OC field (28NM) */
#define OTPPOC_READ_28NM	0
#define OTPPOC_READBURST_28NM	1
#define OTPPOC_PROG_ENABLE_28NM 2
#define OTPPOC_PROG_DISABLE_28NM	3
#define OTPPOC_PRESCREEN_28NM	4
#define OTPPOC_PRESCREEN_RP_28NM	5
#define OTPPOC_FLUSH_28NM	6
#define OTPPOC_NOP_28NM	7
#define OTPPOC_PROG_ECC_28NM	8
#define OTPPOC_PROG_ECC_READ_28NM	9
#define OTPPOC_PROG_28NM	10
#define OTPPOC_PROGRAM_RP_28NM	11
#define OTPPOC_PROGRAM_OVST_28NM	12
#define OTPPOC_RELOAD_28NM	13
#define OTPPOC_ERASE_28NM	14
#define OTPPOC_LOAD_RF_28NM	15
#define OTPPOC_CTRL_WR_28NM 16
#define OTPPOC_CTRL_RD_28NM	17
#define OTPPOC_READ_HP_28NM	18
#define OTPPOC_READ_OVST_28NM	19
#define OTPPOC_READ_VERIFY0_28NM	20
#define OTPPOC_READ_VERIFY1_28NM	21
#define OTPPOC_READ_FORCE0_28NM	22
#define OTPPOC_READ_FORCE1_28NM	23
#define OTPPOC_BURNIN_28NM	24
#define OTPPOC_PROGRAM_LOCK_28NM	25
#define OTPPOC_PROGRAM_TESTCOL_28NM	26
#define OTPPOC_READ_TESTCOL_28NM	27
#define OTPPOC_READ_FOUT_28NM	28
#define OTPPOC_SFT_RESET_28NM	29

#define OTPP_OC_MASK_28NM	0x0f800000
#define OTPP_OC_SHIFT_28NM	23

/* OTPControl bitmap for GCI rev >= 7 */
#define OTPC_PROGEN_28NM	0x8
#define OTPC_DBLERRCLR		0x20
#define OTPC_CLK_EN_MASK	0x00000040
#define OTPC_CLK_DIV_MASK	0x00000F80
#define OTPC_FORCE_OTP_PWR_DIS	0x00008000

/* Fields in otplayoutextension */
#define OTPLAYOUTEXT_FUSE_MASK	0x3FF

/* Jtagm characteristics that appeared at a given corerev */
#define	JTAGM_CREV_OLD		10	/**< Old command set, 16bit max IR */
#define	JTAGM_CREV_IRP		22	/**< Able to do pause-ir */
#define	JTAGM_CREV_RTI		28	/**< Able to do return-to-idle */

/* jtagcmd */
#define JCMD_START		0x80000000
#define JCMD_BUSY		0x80000000
#define JCMD_STATE_MASK		0x60000000
#define JCMD_STATE_TLR		0x00000000	/**< Test-logic-reset */
#define JCMD_STATE_PIR		0x20000000	/**< Pause IR */
#define JCMD_STATE_PDR		0x40000000	/**< Pause DR */
#define JCMD_STATE_RTI		0x60000000	/**< Run-test-idle */
#define JCMD0_ACC_MASK		0x0000f000
#define JCMD0_ACC_IRDR		0x00000000
#define JCMD0_ACC_DR		0x00001000
#define JCMD0_ACC_IR		0x00002000
#define JCMD0_ACC_RESET		0x00003000
#define JCMD0_ACC_IRPDR		0x00004000
#define JCMD0_ACC_PDR		0x00005000
#define JCMD0_IRW_MASK		0x00000f00
#define JCMD_ACC_MASK		0x000f0000	/**< Changes for corerev 11 */
#define JCMD_ACC_IRDR		0x00000000
#define JCMD_ACC_DR		0x00010000
#define JCMD_ACC_IR		0x00020000
#define JCMD_ACC_RESET		0x00030000
#define JCMD_ACC_IRPDR		0x00040000
#define JCMD_ACC_PDR		0x00050000
#define JCMD_ACC_PIR		0x00060000
#define JCMD_ACC_IRDR_I		0x00070000	/**< rev 28: return to run-test-idle */
#define JCMD_ACC_DR_I		0x00080000	/**< rev 28: return to run-test-idle */
#define JCMD_IRW_MASK		0x00001f00
#define JCMD_IRW_SHIFT		8
#define JCMD_DRW_MASK		0x0000003f

/* jtagctrl */
#define JCTRL_FORCE_CLK		4		/**< Force clock */
#define JCTRL_EXT_EN		2		/**< Enable external targets */
#define JCTRL_EN		1		/**< Enable Jtag master */
#define JCTRL_TAPSEL_BIT	0x00000008	/**< JtagMasterCtrl tap_sel bit */

/* swdmasterctrl */
#define SWDCTRL_INT_EN		8		/**< Enable internal targets */
#define SWDCTRL_FORCE_CLK	4		/**< Force clock */
#define SWDCTRL_OVJTAG		2		/**< Enable shared SWD/JTAG pins */
#define SWDCTRL_EN		1		/**< Enable Jtag master */

/* Fields in clkdiv */
#define	CLKD_SFLASH		0x1f000000
#define	CLKD_SFLASH_SHIFT	24
#define	CLKD_OTP		0x000f0000
#define	CLKD_OTP_SHIFT		16
#define	CLKD_JTAG		0x00000f00
#define	CLKD_JTAG_SHIFT		8
#define	CLKD_UART		0x000000ff

#define	CLKD2_SROM		0x00000007
#define	CLKD2_SROMDIV_32	0
#define	CLKD2_SROMDIV_64	1
#define	CLKD2_SROMDIV_96	2
#define	CLKD2_SROMDIV_128	3
#define	CLKD2_SROMDIV_192	4
#define	CLKD2_SROMDIV_256	5
#define	CLKD2_SROMDIV_384	6
#define	CLKD2_SROMDIV_512	7
#define	CLKD2_SWD		0xf8000000
#define	CLKD2_SWD_SHIFT		27

/* intstatus/intmask */
#define	CI_GPIO			0x00000001	/**< gpio intr */
#define	CI_EI			0x00000002	/**< extif intr (corerev >= 3) */
#define	CI_TEMP			0x00000004	/**< temp. ctrl intr (corerev >= 15) */
#define	CI_SIRQ			0x00000008	/**< serial IRQ intr (corerev >= 15) */
#define	CI_ECI			0x00000010	/**< eci intr (corerev >= 21) */
#define	CI_PMU			0x00000020	/**< pmu intr (corerev >= 21) */
#define	CI_UART			0x00000040	/**< uart intr (corerev >= 21) */
#define	CI_WECI			0x00000080	/* eci wakeup intr (corerev >= 21) */
#define	CI_SPMI			0x00100000	/* SPMI (corerev >= 65) */
#define	CI_RNG			0x00200000	/**<  rng intr (corerev >= 65) */
#define	CI_SSRESET_F0	0x10000000	/**< ss reset occurred */
#define	CI_SSRESET_F1	0x20000000	/**< ss reset occurred */
#define	CI_SSRESET_F2	0x40000000	/**< ss reset occurred */
#define	CI_WDRESET		0x80000000	/**< watchdog reset occurred */

/* slow_clk_ctl */
#define SCC_SS_MASK		0x00000007	/**< slow clock source mask */
#define	SCC_SS_LPO		0x00000000	/**< source of slow clock is LPO */
#define	SCC_SS_XTAL		0x00000001	/**< source of slow clock is crystal */
#define	SCC_SS_PCI		0x00000002	/**< source of slow clock is PCI */
#define SCC_LF			0x00000200	/**< LPOFreqSel, 1: 160Khz, 0: 32KHz */
#define SCC_LP			0x00000400	/**< LPOPowerDown, 1: LPO is disabled,
						 * 0: LPO is enabled
						 */
#define SCC_FS			0x00000800 /**< ForceSlowClk, 1: sb/cores running on slow clock,
						 * 0: power logic control
						 */
#define SCC_IP			0x00001000 /**< IgnorePllOffReq, 1/0: power logic ignores/honors
						 * PLL clock disable requests from core
						 */
#define SCC_XC			0x00002000	/**< XtalControlEn, 1/0: power logic does/doesn't
						 * disable crystal when appropriate
						 */
#define SCC_XP			0x00004000	/**< XtalPU (RO), 1/0: crystal running/disabled */
#define SCC_CD_MASK		0xffff0000	/**< ClockDivider (SlowClk = 1/(4+divisor)) */
#define SCC_CD_SHIFT		16

/* system_clk_ctl */
#define	SYCC_IE			0x00000001	/**< ILPen: Enable Idle Low Power */
#define	SYCC_AE			0x00000002	/**< ALPen: Enable Active Low Power */
#define	SYCC_FP			0x00000004	/**< ForcePLLOn */
#define	SYCC_AR			0x00000008	/**< Force ALP (or HT if ALPen is not set */
#define	SYCC_HR			0x00000010	/**< Force HT */
#define SYCC_CD_MASK		0xffff0000	/**< ClkDiv  (ILP = 1/(4 * (divisor + 1)) */
#define SYCC_CD_SHIFT		16

/* watchdogcounter */
/* WL sub-system reset */
#define WD_SSRESET_PCIE_F0_EN			0x10000000
/* BT sub-system reset */
#define WD_SSRESET_PCIE_F1_EN			0x20000000
#define WD_SSRESET_PCIE_F2_EN			0x40000000
/* Both WL and BT sub-system reset */
#define WD_SSRESET_PCIE_ALL_FN_EN		0x80000000
#define WD_COUNTER_MASK				0x0fffffff
#define WD_ENABLE_MASK	\
	(WD_SSRESET_PCIE_F0_EN | WD_SSRESET_PCIE_F1_EN | \
	WD_SSRESET_PCIE_F2_EN | WD_SSRESET_PCIE_ALL_FN_EN)

/* Indirect backplane access */
#define	BPIA_BYTEEN		0x0000000f
#define	BPIA_SZ1		0x00000001
#define	BPIA_SZ2		0x00000003
#define	BPIA_SZ4		0x00000007
#define	BPIA_SZ8		0x0000000f
#define	BPIA_WRITE		0x00000100
#define	BPIA_START		0x00000200
#define	BPIA_BUSY		0x00000200
#define	BPIA_ERROR		0x00000400

/* pcmcia/prog/flash_config */
#define	CF_EN			0x00000001	/**< enable */
#define	CF_EM_MASK		0x0000000e	/**< mode */
#define	CF_EM_SHIFT		1
#define	CF_EM_FLASH		0		/**< flash/asynchronous mode */
#define	CF_EM_SYNC		2		/**< synchronous mode */
#define	CF_EM_PCMCIA		4		/**< pcmcia mode */
#define	CF_DS			0x00000010	/**< destsize:  0=8bit, 1=16bit */
#define	CF_BS			0x00000020	/**< byteswap */
#define	CF_CD_MASK		0x000000c0	/**< clock divider */
#define	CF_CD_SHIFT		6
#define	CF_CD_DIV2		0x00000000	/**< backplane/2 */
#define	CF_CD_DIV3		0x00000040	/**< backplane/3 */
#define	CF_CD_DIV4		0x00000080	/**< backplane/4 */
#define	CF_CE			0x00000100	/**< clock enable */
#define	CF_SB			0x00000200	/**< size/bytestrobe (synch only) */

/* pcmcia_memwait */
#define	PM_W0_MASK		0x0000003f	/**< waitcount0 */
#define	PM_W1_MASK		0x00001f00	/**< waitcount1 */
#define	PM_W1_SHIFT		8
#define	PM_W2_MASK		0x001f0000	/**< waitcount2 */
#define	PM_W2_SHIFT		16
#define	PM_W3_MASK		0x1f000000	/**< waitcount3 */
#define	PM_W3_SHIFT		24

/* pcmcia_attrwait */
#define	PA_W0_MASK		0x0000003f	/**< waitcount0 */
#define	PA_W1_MASK		0x00001f00	/**< waitcount1 */
#define	PA_W1_SHIFT		8
#define	PA_W2_MASK		0x001f0000	/**< waitcount2 */
#define	PA_W2_SHIFT		16
#define	PA_W3_MASK		0x1f000000	/**< waitcount3 */
#define	PA_W3_SHIFT		24

/* pcmcia_iowait */
#define	PI_W0_MASK		0x0000003f	/**< waitcount0 */
#define	PI_W1_MASK		0x00001f00	/**< waitcount1 */
#define	PI_W1_SHIFT		8
#define	PI_W2_MASK		0x001f0000	/**< waitcount2 */
#define	PI_W2_SHIFT		16
#define	PI_W3_MASK		0x1f000000	/**< waitcount3 */
#define	PI_W3_SHIFT		24

/* prog_waitcount */
#define	PW_W0_MASK		0x0000001f	/**< waitcount0 */
#define	PW_W1_MASK		0x00001f00	/**< waitcount1 */
#define	PW_W1_SHIFT		8
#define	PW_W2_MASK		0x001f0000	/**< waitcount2 */
#define	PW_W2_SHIFT		16
#define	PW_W3_MASK		0x1f000000	/**< waitcount3 */
#define	PW_W3_SHIFT		24

#define PW_W0			0x0000000c
#define PW_W1			0x00000a00
#define PW_W2			0x00020000
#define PW_W3			0x01000000

/* flash_waitcount */
#define	FW_W0_MASK		0x0000003f	/**< waitcount0 */
#define	FW_W1_MASK		0x00001f00	/**< waitcount1 */
#define	FW_W1_SHIFT		8
#define	FW_W2_MASK		0x001f0000	/**< waitcount2 */
#define	FW_W2_SHIFT		16
#define	FW_W3_MASK		0x1f000000	/**< waitcount3 */
#define	FW_W3_SHIFT		24

/* When Srom support present, fields in sromcontrol */
#define	SRC_START		0x80000000
#define	SRC_BUSY		0x80000000
#define	SRC_OPCODE		0x60000000
#define	SRC_OP_READ		0x00000000
#define	SRC_OP_WRITE		0x20000000
#define	SRC_OP_WRDIS		0x40000000
#define	SRC_OP_WREN		0x60000000
#define	SRC_OTPSEL		0x00000010
#define SRC_OTPPRESENT		0x00000020
#define	SRC_LOCK		0x00000008
#define	SRC_SIZE_MASK		0x00000006
#define	SRC_SIZE_1K		0x00000000
#define	SRC_SIZE_4K		0x00000002
#define	SRC_SIZE_16K		0x00000004
#define	SRC_SIZE_SHIFT		1
#define	SRC_PRESENT		0x00000001

/* Fields in pmucontrol */
#define	PCTL_ILP_DIV_MASK	0xffff0000
#define	PCTL_ILP_DIV_SHIFT	16
#define PCTL_LQ_REQ_EN		0x00008000
#define PCTL_PLL_PLLCTL_UPD	0x00000400	/**< rev 2 */
#define PCTL_NOILP_ON_WAIT	0x00000200	/**< rev 1 */
#define	PCTL_HT_REQ_EN		0x00000100
#define	PCTL_ALP_REQ_EN		0x00000080
#define	PCTL_XTALFREQ_MASK	0x0000007c
#define	PCTL_XTALFREQ_SHIFT	2
#define	PCTL_ILP_DIV_EN		0x00000002
#define	PCTL_LPO_SEL		0x00000001

/* Fields in pmucontrol_ext */
#define PCTL_EXT_FAST_TRANS_ENAB	0x00000001u
#define PCTL_EXT_USE_LHL_TIMER		0x00000010u
#define PCTL_EXT_FASTLPO_ENAB		0x00000080u
#define PCTL_EXT_FASTLPO_SWENAB		0x00000200u
#define PCTL_EXT_FASTSEQ_ENAB		0x00001000u
#define PCTL_EXT_FASTLPO_PCIE_SWENAB	0x00004000u  /**< rev33 for FLL1M */
#define PCTL_EXT_FASTLPO_SB_SWENAB	0x00008000u  /**< rev36 for FLL1M */
#define PCTL_EXT_REQ_MIRROR_ENAB	0x00010000u  /**< rev36 for ReqMirrorEn */

#define DEFAULT_43012_MIN_RES_MASK		0x0f8bfe77

/*  Retention Control */
#define PMU_RCTL_CLK_DIV_SHIFT		0
#define PMU_RCTL_CHAIN_LEN_SHIFT	12
#define PMU_RCTL_MACPHY_DISABLE_SHIFT	26
#define PMU_RCTL_MACPHY_DISABLE_MASK	(1 << 26)
#define PMU_RCTL_LOGIC_DISABLE_SHIFT	27
#define PMU_RCTL_LOGIC_DISABLE_MASK	(1 << 27)
#define PMU_RCTL_MEMSLP_LOG_SHIFT	28
#define PMU_RCTL_MEMSLP_LOG_MASK	(1 << 28)
#define PMU_RCTL_MEMRETSLP_LOG_SHIFT	29
#define PMU_RCTL_MEMRETSLP_LOG_MASK	(1 << 29)

/*  Retention Group Control */
#define PMU_RCTLGRP_CHAIN_LEN_SHIFT	0
#define PMU_RCTLGRP_RMODE_ENABLE_SHIFT	14
#define PMU_RCTLGRP_RMODE_ENABLE_MASK	(1 << 14)
#define PMU_RCTLGRP_DFT_ENABLE_SHIFT	15
#define PMU_RCTLGRP_DFT_ENABLE_MASK	(1 << 15)
#define PMU_RCTLGRP_NSRST_DISABLE_SHIFT	16
#define PMU_RCTLGRP_NSRST_DISABLE_MASK	(1 << 16)

/* Fields in clkstretch */
#define CSTRETCH_HT		0xffff0000
#define CSTRETCH_ALP		0x0000ffff
#define CSTRETCH_REDUCE_8		0x00080008

/* gpiotimerval */
#define GPIO_ONTIME_SHIFT	16

/* clockcontrol_n */
/* Some pll types use less than the number of bits in some of these (n or m) masks */
#define	CN_N1_MASK		0x3f		/**< n1 control */
#define	CN_N2_MASK		0x3f00		/**< n2 control */
#define	CN_N2_SHIFT		8
#define	CN_PLLC_MASK		0xf0000		/**< pll control */
#define	CN_PLLC_SHIFT		16

/* clockcontrol_sb/pci/uart */
#define	CC_M1_MASK		0x3f		/**< m1 control */
#define	CC_M2_MASK		0x3f00		/**< m2 control */
#define	CC_M2_SHIFT		8
#define	CC_M3_MASK		0x3f0000	/**< m3 control */
#define	CC_M3_SHIFT		16
#define	CC_MC_MASK		0x1f000000	/**< mux control */
#define	CC_MC_SHIFT		24

/* N3M Clock control magic field values */
#define	CC_F6_2			0x02		/**< A factor of 2 in */
#define	CC_F6_3			0x03		/**< 6-bit fields like */
#define	CC_F6_4			0x05		/**< N1, M1 or M3 */
#define	CC_F6_5			0x09
#define	CC_F6_6			0x11
#define	CC_F6_7			0x21

#define	CC_F5_BIAS		5		/**< 5-bit fields get this added */

#define	CC_MC_BYPASS		0x08
#define	CC_MC_M1		0x04
#define	CC_MC_M1M2		0x02
#define	CC_MC_M1M2M3		0x01
#define	CC_MC_M1M3		0x11

/* Type 2 Clock control magic field values */
#define	CC_T2_BIAS		2		/**< n1, n2, m1 & m3 bias */
#define	CC_T2M2_BIAS		3		/**< m2 bias */

#define	CC_T2MC_M1BYP		1
#define	CC_T2MC_M2BYP		2
#define	CC_T2MC_M3BYP		4

/* Type 6 Clock control magic field values */
#define	CC_T6_MMASK		1		/**< bits of interest in m */
#define	CC_T6_M0		120000000	/**< sb clock for m = 0 */
#define	CC_T6_M1		100000000	/**< sb clock for m = 1 */
#define	SB2MIPS_T6(sb)		(2 * (sb))

/* Common clock base */
#define	CC_CLOCK_BASE1		24000000	/**< Half the clock freq */
#define CC_CLOCK_BASE2		12500000	/**< Alternate crystal on some PLLs */

/* Flash types in the chipcommon capabilities register */
#define FLASH_NONE		0x000		/**< No flash */
#define SFLASH_ST		0x100		/**< ST serial flash */
#define SFLASH_AT		0x200		/**< Atmel serial flash */
#define NFLASH			0x300		/**< NAND flash */
#define	PFLASH			0x700		/**< Parallel flash */
#define QSPIFLASH_ST		0x800
#define QSPIFLASH_AT		0x900

/* Bits in the ExtBus config registers */
#define	CC_CFG_EN		0x0001		/**< Enable */
#define	CC_CFG_EM_MASK		0x000e		/**< Extif Mode */
#define	CC_CFG_EM_ASYNC		0x0000		/**<   Async/Parallel flash */
#define	CC_CFG_EM_SYNC		0x0002		/**<   Synchronous */
#define	CC_CFG_EM_PCMCIA	0x0004		/**<   PCMCIA */
#define	CC_CFG_EM_IDE		0x0006		/**<   IDE */
#define	CC_CFG_DS		0x0010		/**< Data size, 0=8bit, 1=16bit */
#define	CC_CFG_CD_MASK		0x00e0		/**< Sync: Clock divisor, rev >= 20 */
#define	CC_CFG_CE		0x0100		/**< Sync: Clock enable, rev >= 20 */
#define	CC_CFG_SB		0x0200		/**< Sync: Size/Bytestrobe, rev >= 20 */
#define	CC_CFG_IS		0x0400		/**< Extif Sync Clk Select, rev >= 20 */

/* ExtBus address space */
#define	CC_EB_BASE		0x1a000000	/**< Chipc ExtBus base address */
#define	CC_EB_PCMCIA_MEM	0x1a000000	/**< PCMCIA 0 memory base address */
#define	CC_EB_PCMCIA_IO		0x1a200000	/**< PCMCIA 0 I/O base address */
#define	CC_EB_PCMCIA_CFG	0x1a400000	/**< PCMCIA 0 config base address */
#define	CC_EB_IDE		0x1a800000	/**< IDE memory base */
#define	CC_EB_PCMCIA1_MEM	0x1a800000	/**< PCMCIA 1 memory base address */
#define	CC_EB_PCMCIA1_IO	0x1aa00000	/**< PCMCIA 1 I/O base address */
#define	CC_EB_PCMCIA1_CFG	0x1ac00000	/**< PCMCIA 1 config base address */
#define	CC_EB_PROGIF		0x1b000000	/**< ProgIF Async/Sync base address */

/* Start/busy bit in flashcontrol */
#define SFLASH_OPCODE		0x000000ff
#define SFLASH_ACTION		0x00000700
#define	SFLASH_CS_ACTIVE	0x00001000	/**< Chip Select Active, rev >= 20 */
#define SFLASH_START		0x80000000
#define SFLASH_BUSY		SFLASH_START

/* flashcontrol action codes */
#define	SFLASH_ACT_OPONLY	0x0000		/**< Issue opcode only */
#define	SFLASH_ACT_OP1D		0x0100		/**< opcode + 1 data byte */
#define	SFLASH_ACT_OP3A		0x0200		/**< opcode + 3 addr bytes */
#define	SFLASH_ACT_OP3A1D	0x0300		/**< opcode + 3 addr & 1 data bytes */
#define	SFLASH_ACT_OP3A4D	0x0400		/**< opcode + 3 addr & 4 data bytes */
#define	SFLASH_ACT_OP3A4X4D	0x0500		/**< opcode + 3 addr, 4 don't care & 4 data bytes */
#define	SFLASH_ACT_OP3A1X4D	0x0700		/**< opcode + 3 addr, 1 don't care & 4 data bytes */

/* flashcontrol action+opcodes for ST flashes */
#define SFLASH_ST_WREN		0x0006		/**< Write Enable */
#define SFLASH_ST_WRDIS		0x0004		/**< Write Disable */
#define SFLASH_ST_RDSR		0x0105		/**< Read Status Register */
#define SFLASH_ST_WRSR		0x0101		/**< Write Status Register */
#define SFLASH_ST_READ		0x0303		/**< Read Data Bytes */
#define SFLASH_ST_PP		0x0302		/**< Page Program */
#define SFLASH_ST_SE		0x02d8		/**< Sector Erase */
#define SFLASH_ST_BE		0x00c7		/**< Bulk Erase */
#define SFLASH_ST_DP		0x00b9		/**< Deep Power-down */
#define SFLASH_ST_RES		0x03ab		/**< Read Electronic Signature */
#define SFLASH_ST_CSA		0x1000		/**< Keep chip select asserted */
#define SFLASH_ST_SSE		0x0220		/**< Sub-sector Erase */

#define SFLASH_ST_READ4B	0x6313		/* Read Data Bytes in 4Byte address */
#define SFLASH_ST_PP4B		0x6312		/* Page Program in 4Byte address */
#define SFLASH_ST_SE4B		0x62dc		/* Sector Erase in 4Byte address */
#define SFLASH_ST_SSE4B		0x6221		/* Sub-sector Erase */

#define SFLASH_MXIC_RDID	0x0390		/* Read Manufacture ID */
#define SFLASH_MXIC_MFID	0xc2		/* MXIC Manufacture ID */

#define SFLASH_WINBOND_RDID	0x0390		/* Read Manufacture ID */
#define SFLASH_WINBOND_MFID	0xef		/* Winbond Manufacture ID */

/* Status register bits for ST flashes */
#define SFLASH_ST_WIP		0x01		/**< Write In Progress */
#define SFLASH_ST_WEL		0x02		/**< Write Enable Latch */
#define SFLASH_ST_BP_MASK	0x1c		/**< Block Protect */
#define SFLASH_ST_BP_SHIFT	2
#define SFLASH_ST_SRWD		0x80		/**< Status Register Write Disable */

/* flashcontrol action+opcodes for Atmel flashes */
#define SFLASH_AT_READ				0x07e8
#define SFLASH_AT_PAGE_READ			0x07d2
/* PR9631: impossible to specify Atmel Buffer Read command */
#define SFLASH_AT_BUF1_READ
#define SFLASH_AT_BUF2_READ
#define SFLASH_AT_STATUS			0x01d7
#define SFLASH_AT_BUF1_WRITE			0x0384
#define SFLASH_AT_BUF2_WRITE			0x0387
#define SFLASH_AT_BUF1_ERASE_PROGRAM		0x0283
#define SFLASH_AT_BUF2_ERASE_PROGRAM		0x0286
#define SFLASH_AT_BUF1_PROGRAM			0x0288
#define SFLASH_AT_BUF2_PROGRAM			0x0289
#define SFLASH_AT_PAGE_ERASE			0x0281
#define SFLASH_AT_BLOCK_ERASE			0x0250
#define SFLASH_AT_BUF1_WRITE_ERASE_PROGRAM	0x0382
#define SFLASH_AT_BUF2_WRITE_ERASE_PROGRAM	0x0385
#define SFLASH_AT_BUF1_LOAD			0x0253
#define SFLASH_AT_BUF2_LOAD			0x0255
#define SFLASH_AT_BUF1_COMPARE			0x0260
#define SFLASH_AT_BUF2_COMPARE			0x0261
#define SFLASH_AT_BUF1_REPROGRAM		0x0258
#define SFLASH_AT_BUF2_REPROGRAM		0x0259

/* Status register bits for Atmel flashes */
#define SFLASH_AT_READY				0x80
#define SFLASH_AT_MISMATCH			0x40
#define SFLASH_AT_ID_MASK			0x38
#define SFLASH_AT_ID_SHIFT			3

/* SPI register bits, corerev >= 37 */
#define GSIO_START			0x80000000u
#define GSIO_BUSY			GSIO_START

/* UART Function sel related */
#define MUXENAB_DEF_UART_MASK           0x0000000fu
#define MUXENAB_DEF_UART_SHIFT          0

/* HOST_WAKE Function sel related */
#define MUXENAB_DEF_HOSTWAKE_MASK	0x000000f0u	/**< configure GPIO for host_wake */
#define MUXENAB_DEF_HOSTWAKE_SHIFT	4u

/* GCI UART Function sel related */
#define MUXENAB_GCI_UART_MASK		0x00000f00u
#define MUXENAB_GCI_UART_SHIFT		8u
#define MUXENAB_GCI_UART_FNSEL_MASK	0x00003000u
#define MUXENAB_GCI_UART_FNSEL_SHIFT	12u

/* Mask used to decide whether MUX to be performed or not */
#define MUXENAB_DEF_GETIX(val, name) \
	((((val) & MUXENAB_DEF_ ## name ## _MASK) >> MUXENAB_DEF_ ## name ## _SHIFT) - 1)

/*
 * These are the UART port assignments, expressed as offsets from the base
 * register.  These assignments should hold for any serial port based on
 * a 8250, 16450, or 16550(A).
 */

#define UART_RX		0	/**< In:  Receive buffer (DLAB=0) */
#define UART_TX		0	/**< Out: Transmit buffer (DLAB=0) */
#define UART_DLL	0	/**< Out: Divisor Latch Low (DLAB=1) */
#define UART_IER	1	/**< In/Out: Interrupt Enable Register (DLAB=0) */
#define UART_DLM	1	/**< Out: Divisor Latch High (DLAB=1) */
#define UART_IIR	2	/**< In: Interrupt Identity Register  */
#define UART_FCR	2	/**< Out: FIFO Control Register */
#define UART_LCR	3	/**< Out: Line Control Register */
#define UART_MCR	4	/**< Out: Modem Control Register */
#define UART_LSR	5	/**< In:  Line Status Register */
#define UART_MSR	6	/**< In:  Modem Status Register */
#define UART_SCR	7	/**< I/O: Scratch Register */
#define UART_LCR_DLAB	0x80	/**< Divisor latch access bit */
#define UART_LCR_WLEN8	0x03	/**< Word length: 8 bits */
#define UART_MCR_OUT2	0x08	/**< MCR GPIO out 2 */
#define UART_MCR_LOOP	0x10	/**< Enable loopback test mode */
#define UART_LSR_RX_FIFO	0x80	/**< Receive FIFO error */
#define UART_LSR_TDHR		0x40	/**< Data-hold-register empty */
#define UART_LSR_THRE		0x20	/**< Transmit-hold-register empty */
#define UART_LSR_BREAK		0x10	/**< Break interrupt */
#define UART_LSR_FRAMING	0x08	/**< Framing error */
#define UART_LSR_PARITY		0x04	/**< Parity error */
#define UART_LSR_OVERRUN	0x02	/**< Overrun error */
#define UART_LSR_RXRDY		0x01	/**< Receiver ready */
#define UART_FCR_FIFO_ENABLE 1	/**< FIFO control register bit controlling FIFO enable/disable */

/* Interrupt Identity Register (IIR) bits */
#define UART_IIR_FIFO_MASK	0xc0	/**< IIR FIFO disable/enabled mask */
#define UART_IIR_INT_MASK	0xf	/**< IIR interrupt ID source */
#define UART_IIR_MDM_CHG	0x0	/**< Modem status changed */
#define UART_IIR_NOINT		0x1	/**< No interrupt pending */
#define UART_IIR_THRE		0x2	/**< THR empty */
#define UART_IIR_RCVD_DATA	0x4	/**< Received data available */
#define UART_IIR_RCVR_STATUS	0x6	/**< Receiver status */
#define UART_IIR_CHAR_TIME	0xc	/**< Character time */

/* Interrupt Enable Register (IER) bits */
#define UART_IER_PTIME	128	/**< Programmable THRE Interrupt Mode Enable */
#define UART_IER_EDSSI	8	/**< enable modem status interrupt */
#define UART_IER_ELSI	4	/**< enable receiver line status interrupt */
#define UART_IER_ETBEI  2	/**< enable transmitter holding register empty interrupt */
#define UART_IER_ERBFI	1	/**< enable data available interrupt */

/* pmustatus */
#define PST_SLOW_WR_PENDING 0x0400
#define PST_EXTLPOAVAIL	0x0100
#define PST_WDRESET	0x0080
#define	PST_INTPEND	0x0040
#define	PST_SBCLKST	0x0030
#define	PST_SBCLKST_ILP	0x0010
#define	PST_SBCLKST_ALP	0x0020
#define	PST_SBCLKST_HT	0x0030
#define	PST_ALPAVAIL	0x0008
#define	PST_HTAVAIL	0x0004
#define	PST_RESINIT	0x0003
#define	PST_ILPFASTLPO	0x00010000

/* pmucapabilities */
#define PCAP_REV_MASK	0x000000ff
#define PCAP_RC_MASK	0x00001f00
#define PCAP_RC_SHIFT	8
#define PCAP_TC_MASK	0x0001e000
#define PCAP_TC_SHIFT	13
#define PCAP_PC_MASK	0x001e0000
#define PCAP_PC_SHIFT	17
#define PCAP_VC_MASK	0x01e00000
#define PCAP_VC_SHIFT	21
#define PCAP_CC_MASK	0x1e000000
#define PCAP_CC_SHIFT	25
#define PCAP5_PC_MASK	0x003e0000	/**< PMU corerev >= 5 */
#define PCAP5_PC_SHIFT	17
#define PCAP5_VC_MASK	0x07c00000
#define PCAP5_VC_SHIFT	22
#define PCAP5_CC_MASK	0xf8000000
#define PCAP5_CC_SHIFT	27

/* pmucapabilities ext */
#define PCAP_EXT_ST_NUM_SHIFT			(8)	/* stat timer number */
#define PCAP_EXT_ST_NUM_MASK			(0xf << PCAP_EXT_ST_NUM_SHIFT)
#define PCAP_EXT_ST_SRC_NUM_SHIFT		(12)	/* stat timer source number */
#define PCAP_EXT_ST_SRC_NUM_MASK		(0xf << PCAP_EXT_ST_SRC_NUM_SHIFT)
#define PCAP_EXT_MAC_RSRC_REQ_TMR_CNT_SHIFT	(20u)	/* # of MAC rsrc req timers */
#define PCAP_EXT_MAC_RSRC_REQ_TMR_CNT_MASK	(7u << PCAP_EXT_MAC_RSRC_REQ_TMR_CNT_SHIFT)
#define PCAP_EXT_PMU_INTR_RCVR_CNT_SHIFT	(23u)	/* pmu int rcvr cnt */
#define PCAP_EXT_PMU_INTR_RCVR_CNT_MASK		(7u << PCAP_EXT_PMU_INTR_RCVR_CNT_SHIFT)

/* pmustattimer ctrl */
#define PMU_ST_SRC_SHIFT	(0)	/* stat timer source number */
#define PMU_ST_SRC_MASK		(0xff << PMU_ST_SRC_SHIFT)
#define PMU_ST_CNT_MODE_SHIFT	(10)	/* stat timer count mode */
#define PMU_ST_CNT_MODE_MASK	(0x3 << PMU_ST_CNT_MODE_SHIFT)
#define PMU_ST_EN_SHIFT		(8)	/* stat timer enable */
#define PMU_ST_EN_MASK		(0x1 << PMU_ST_EN_SHIFT)
#define PMU_ST_ENAB		1
#define PMU_ST_DISAB		0
#define PMU_ST_INT_EN_SHIFT	(9)	/* stat timer enable */
#define PMU_ST_INT_EN_MASK	(0x1 << PMU_ST_INT_EN_SHIFT)
#define PMU_ST_INT_ENAB		1
#define PMU_ST_INT_DISAB	0

/* CoreCapabilitiesExtension */
#define PCAP_EXT_USE_MUXED_ILP_CLK_MASK	0x04000000

/* PMU Resource Request Timer registers */
/* This is based on PmuRev0 */
#define	PRRT_TIME_MASK	0x03ff
#define	PRRT_INTEN	0x0400
/* ReqActive	25
 * The hardware sets this field to 1 when the timer expires.
 * Software writes this field to 1 to make immediate resource requests.
 */
#define	PRRT_REQ_ACTIVE	0x0800	/* To check h/w status */
#define	PRRT_IMMEDIATE_RES_REQ	0x0800	/* macro for sw immediate res req */
#define	PRRT_ALP_REQ	0x1000
#define	PRRT_HT_REQ	0x2000
#define PRRT_HQ_REQ 0x4000

/* PMU Int Control register bits */
#define PMU_INTC_ALP_REQ	0x1
#define PMU_INTC_HT_REQ		0x2
#define PMU_INTC_HQ_REQ		0x4

/* bit 0 of the PMU interrupt vector is asserted if this mask is enabled */
#define RSRC_INTR_MASK_TIMER_INT_0 1
#define PMU_INTR_MASK_EXTWAKE_REQ_ACTIVE_0 (1 << 20)

#define PMU_INT_STAT_RSRC_EVENT_INT0_SHIFT	(8u)
#define PMU_INT_STAT_RSRC_EVENT_INT0_MASK	(1u << PMU_INT_STAT_RSRC_EVENT_INT0_SHIFT)

/* bit 16 of the PMU interrupt vector - Stats Timer Interrupt */
#define PMU_INT_STAT_TIMER_INT_SHIFT		(16u)
#define PMU_INT_STAT_TIMER_INT_MASK		(1u <<  PMU_INT_STAT_TIMER_INT_SHIFT)

/*
 * bit 18 of the PMU interrupt vector - S/R self test fails
 */
#define PMU_INT_STAT_SR_ERR_SHIFT		(18u)
#define PMU_INT_STAT_SR_ERR_MASK		(1u <<  PMU_INT_STAT_SR_ERR_SHIFT)

/* PMU resource bit position */
#define PMURES_BIT(bit)	(1u << (bit))

/* PMU resource number limit */
#define PMURES_MAX_RESNUM	30

/* PMU chip control0 register */
#define	PMU_CHIPCTL0		0

#define PMU_CC0_4369_XTALCORESIZE_BIAS_ADJ_START_VAL	(0x20 << 0)
#define PMU_CC0_4369_XTALCORESIZE_BIAS_ADJ_START_MASK	(0x3F << 0)
#define PMU_CC0_4369_XTALCORESIZE_BIAS_ADJ_NORMAL_VAL	(0xF << 6)
#define PMU_CC0_4369B0_XTALCORESIZE_BIAS_ADJ_NORMAL_VAL	(0x1A << 6)
#define PMU_CC0_4369_XTALCORESIZE_BIAS_ADJ_NORMAL_MASK	(0x3F << 6)
#define PMU_CC0_4369_XTAL_RES_BYPASS_START_VAL			(0 << 12)
#define PMU_CC0_4369_XTAL_RES_BYPASS_START_MASK			(0x7 << 12)
#define PMU_CC0_4369_XTAL_RES_BYPASS_NORMAL_VAL			(0x1 << 15)
#define PMU_CC0_4369_XTAL_RES_BYPASS_NORMAL_MASK		(0x7 << 15)

// This is not used. so retains reset value
#define PMU_CC0_4362_XTALCORESIZE_BIAS_ADJ_START_VAL		(0x20u << 0u)

#define PMU_CC0_4362_XTALCORESIZE_BIAS_ADJ_START_MASK		(0x3Fu << 0u)
#define PMU_CC0_4362_XTALCORESIZE_BIAS_ADJ_NORMAL_VAL		(0x1Au << 6u)
#define PMU_CC0_4362_XTALCORESIZE_BIAS_ADJ_NORMAL_MASK		(0x3Fu << 6u)
#define PMU_CC0_4362_XTAL_RES_BYPASS_START_VAL			(0x00u << 12u)
#define PMU_CC0_4362_XTAL_RES_BYPASS_START_MASK			(0x07u << 12u)
#define PMU_CC0_4362_XTAL_RES_BYPASS_NORMAL_VAL			(0x02u << 15u)
#define PMU_CC0_4362_XTAL_RES_BYPASS_NORMAL_MASK		(0x07u << 15u)

#define PMU_CC0_4378_XTALCORESIZE_BIAS_ADJ_START_VAL	(0x20 << 0)
#define PMU_CC0_4378_XTALCORESIZE_BIAS_ADJ_START_MASK	(0x3F << 0)
#define PMU_CC0_4378_XTALCORESIZE_BIAS_ADJ_NORMAL_VAL	(0x1A << 6)
#define PMU_CC0_4378_XTALCORESIZE_BIAS_ADJ_NORMAL_MASK	(0x3F << 6)
#define PMU_CC0_4378_XTAL_RES_BYPASS_START_VAL			(0 << 12)
#define PMU_CC0_4378_XTAL_RES_BYPASS_START_MASK			(0x7 << 12)
#define PMU_CC0_4378_XTAL_RES_BYPASS_NORMAL_VAL			(0x2 << 15)
#define PMU_CC0_4378_XTAL_RES_BYPASS_NORMAL_MASK		(0x7 << 15)

#define PMU_CC0_4387_XTALCORESIZE_BIAS_ADJ_START_VAL	(0x20 << 0)
#define PMU_CC0_4387_XTALCORESIZE_BIAS_ADJ_START_MASK	(0x3F << 0)
#define PMU_CC0_4387_XTALCORESIZE_BIAS_ADJ_NORMAL_VAL	(0x1A << 6)
#define PMU_CC0_4387_XTALCORESIZE_BIAS_ADJ_NORMAL_MASK	(0x3F << 6)
#define PMU_CC0_4387_XTAL_RES_BYPASS_START_VAL			(0 << 12)
#define PMU_CC0_4387_XTAL_RES_BYPASS_START_MASK			(0x7 << 12)
#define PMU_CC0_4387_XTAL_RES_BYPASS_NORMAL_VAL			(0x2 << 15)
#define PMU_CC0_4387_XTAL_RES_BYPASS_NORMAL_MASK		(0x7 << 15)
#define PMU_CC0_4387_BT_PU_WAKE_MASK				(0x3u << 30u)

/* clock req types */
#define PMU_CC1_CLKREQ_TYPE_SHIFT	19
#define PMU_CC1_CLKREQ_TYPE_MASK	(1 << PMU_CC1_CLKREQ_TYPE_SHIFT)

#define CLKREQ_TYPE_CONFIG_OPENDRAIN		0
#define CLKREQ_TYPE_CONFIG_PUSHPULL		1

/* Power Control */
#define PWRCTL_ENAB_MEM_CLK_GATE_SHIFT		5
#define PWRCTL_FORCE_HW_PWR_REQ_OFF_SHIFT	6
#define PWRCTL_AUTO_MEM_STBYRET			28

/* PMU chip control1 register */
#define	PMU_CHIPCTL1			1
#define	PMU_CC1_RXC_DLL_BYPASS		0x00010000
#define PMU_CC1_ENABLE_BBPLL_PWR_DOWN	0x00000010

#define PMU_CC1_IF_TYPE_MASK		0x00000030
#define PMU_CC1_IF_TYPE_RMII		0x00000000
#define PMU_CC1_IF_TYPE_MII		0x00000010
#define PMU_CC1_IF_TYPE_RGMII		0x00000020

#define PMU_CC1_SW_TYPE_MASK		0x000000c0
#define PMU_CC1_SW_TYPE_EPHY		0x00000000
#define PMU_CC1_SW_TYPE_EPHYMII		0x00000040
#define PMU_CC1_SW_TYPE_EPHYRMII	0x00000080
#define PMU_CC1_SW_TYPE_RGMII		0x000000c0

#define PMU_CC1_ENABLE_CLOSED_LOOP_MASK 0x00000080
#define PMU_CC1_ENABLE_CLOSED_LOOP      0x00000000

#define PMU_CC1_PWRSW_CLKSTRSTP_DELAY_MASK	0x00003F00u
#ifdef BCM_FASTLPO_PMU
#define PMU_CC1_PWRSW_CLKSTRSTP_DELAY		0x00002000u
#else
#define PMU_CC1_PWRSW_CLKSTRSTP_DELAY		0x00000400u
#endif /* BCM_FASTLPO_PMU */

/* PMU chip control2 register */
#define PMU_CC2_CB2WL_INTR_PWRREQ_EN		(1u << 13u)
#define PMU_CC2_RFLDO3P3_PU_FORCE_ON		(1u << 15u)
#define PMU_CC2_RFLDO3P3_PU_CLEAR		0x00000000u

#define PMU_CC2_WL2CDIG_I_PMU_SLEEP		(1u << 16u)
#define	PMU_CHIPCTL2		2u
#define PMU_CC2_FORCE_SUBCORE_PWR_SWITCH_ON	(1u << 18u)
#define PMU_CC2_FORCE_PHY_PWR_SWITCH_ON		(1u << 19u)
#define PMU_CC2_FORCE_VDDM_PWR_SWITCH_ON	(1u << 20u)
#define PMU_CC2_FORCE_MEMLPLDO_PWR_SWITCH_ON	(1u << 21u)
#define PMU_CC2_MASK_WL_DEV_WAKE             (1u << 22u)
#define PMU_CC2_INV_GPIO_POLARITY_PMU_WAKE   (1u << 25u)
#define PMU_CC2_GCI2_WAKE                    (1u << 31u)

#define PMU_CC2_4369_XTALCORESIZE_BIAS_ADJ_START_VAL	(0x3u << 26u)
#define PMU_CC2_4369_XTALCORESIZE_BIAS_ADJ_START_MASK	(0x3u << 26u)
#define PMU_CC2_4369_XTALCORESIZE_BIAS_ADJ_NORMAL_VAL	(0x0u << 28u)
#define PMU_CC2_4369_XTALCORESIZE_BIAS_ADJ_NORMAL_MASK	(0x3u << 28u)

#define PMU_CC2_4362_XTALCORESIZE_BIAS_ADJ_START_VAL	(0x3u << 26u)
#define PMU_CC2_4362_XTALCORESIZE_BIAS_ADJ_START_MASK	(0x3u << 26u)
#define PMU_CC2_4362_XTALCORESIZE_BIAS_ADJ_NORMAL_VAL	(0x0u << 28u)
#define PMU_CC2_4362_XTALCORESIZE_BIAS_ADJ_NORMAL_MASK	(0x3u << 28u)

#define PMU_CC2_4378_XTALCORESIZE_BIAS_ADJ_START_VAL	(0x3u << 26u)
#define PMU_CC2_4378_XTALCORESIZE_BIAS_ADJ_START_MASK	(0x3u << 26u)
#define PMU_CC2_4378_XTALCORESIZE_BIAS_ADJ_NORMAL_VAL	(0x0u << 28u)
#define PMU_CC2_4378_XTALCORESIZE_BIAS_ADJ_NORMAL_MASK	(0x3u << 28u)

#define PMU_CC2_4387_XTALCORESIZE_BIAS_ADJ_START_VAL	(0x3u << 26u)
#define PMU_CC2_4387_XTALCORESIZE_BIAS_ADJ_START_MASK	(0x3u << 26u)
#define PMU_CC2_4387_XTALCORESIZE_BIAS_ADJ_NORMAL_VAL	(0x0u << 28u)
#define PMU_CC2_4387_XTALCORESIZE_BIAS_ADJ_NORMAL_MASK	(0x3u << 28u)

/* PMU chip control3 register */
#define	PMU_CHIPCTL3		3u
#define PMU_CC3_ENABLE_SDIO_WAKEUP_SHIFT  19u
#define PMU_CC3_ENABLE_RF_SHIFT           22u
#define PMU_CC3_RF_DISABLE_IVALUE_SHIFT   23u

#define PMU_CC3_4369_XTALCORESIZE_PMOS_START_VAL	(0x3Fu << 0u)
#define PMU_CC3_4369_XTALCORESIZE_PMOS_START_MASK	(0x3Fu << 0u)
#define PMU_CC3_4369_XTALCORESIZE_PMOS_NORMAL_VAL	(0x3Fu << 15u)
#define PMU_CC3_4369_XTALCORESIZE_PMOS_NORMAL_MASK	(0x3Fu << 15u)
#define PMU_CC3_4369_XTALCORESIZE_NMOS_START_VAL	(0x3Fu << 6u)
#define PMU_CC3_4369_XTALCORESIZE_NMOS_START_MASK	(0x3Fu << 6u)
#define PMU_CC3_4369_XTALCORESIZE_NMOS_NORMAL_VAL	(0x3Fu << 21)
#define PMU_CC3_4369_XTALCORESIZE_NMOS_NORMAL_MASK	(0x3Fu << 21)
#define PMU_CC3_4369_XTALSEL_BIAS_RES_START_VAL		(0x2u << 12u)
#define PMU_CC3_4369_XTALSEL_BIAS_RES_START_MASK	(0x7u << 12u)
#define PMU_CC3_4369_XTALSEL_BIAS_RES_NORMAL_VAL	(0x2u << 27u)
#define PMU_CC3_4369_XTALSEL_BIAS_RES_NORMAL_MASK	(0x7u << 27u)

#define PMU_CC3_4362_XTALCORESIZE_PMOS_START_VAL	(0x3Fu << 0u)
#define PMU_CC3_4362_XTALCORESIZE_PMOS_START_MASK	(0x3Fu << 0u)
#define PMU_CC3_4362_XTALCORESIZE_PMOS_NORMAL_VAL	(0x3Fu << 15u)
#define PMU_CC3_4362_XTALCORESIZE_PMOS_NORMAL_MASK	(0x3Fu << 15u)
#define PMU_CC3_4362_XTALCORESIZE_NMOS_START_VAL	(0x3Fu << 6u)
#define PMU_CC3_4362_XTALCORESIZE_NMOS_START_MASK	(0x3Fu << 6u)
#define PMU_CC3_4362_XTALCORESIZE_NMOS_NORMAL_VAL	(0x3Fu << 21u)
#define PMU_CC3_4362_XTALCORESIZE_NMOS_NORMAL_MASK	(0x3Fu << 21u)
#define PMU_CC3_4362_XTALSEL_BIAS_RES_START_VAL		(0x02u << 12u)
#define PMU_CC3_4362_XTALSEL_BIAS_RES_START_MASK	(0x07u << 12u)
/* Changed from 6 to 4 for wlan PHN and to 2 for BT PER issues */
#define PMU_CC3_4362_XTALSEL_BIAS_RES_NORMAL_VAL	(0x02u << 27u)
#define PMU_CC3_4362_XTALSEL_BIAS_RES_NORMAL_MASK	(0x07u << 27u)

#define PMU_CC3_4378_XTALCORESIZE_PMOS_START_VAL	(0x3F << 0)
#define PMU_CC3_4378_XTALCORESIZE_PMOS_START_MASK	(0x3F << 0)
#define PMU_CC3_4378_XTALCORESIZE_PMOS_NORMAL_VAL	(0x3F << 15)
#define PMU_CC3_4378_XTALCORESIZE_PMOS_NORMAL_MASK	(0x3F << 15)
#define PMU_CC3_4378_XTALCORESIZE_NMOS_START_VAL	(0x3F << 6)
#define PMU_CC3_4378_XTALCORESIZE_NMOS_START_MASK	(0x3F << 6)
#define PMU_CC3_4378_XTALCORESIZE_NMOS_NORMAL_VAL	(0x3F << 21)
#define PMU_CC3_4378_XTALCORESIZE_NMOS_NORMAL_MASK	(0x3F << 21)
#define PMU_CC3_4378_XTALSEL_BIAS_RES_START_VAL		(0x2 << 12)
#define PMU_CC3_4378_XTALSEL_BIAS_RES_START_MASK	(0x7 << 12)
#define PMU_CC3_4378_XTALSEL_BIAS_RES_NORMAL_VAL	(0x2 << 27)
#define PMU_CC3_4378_XTALSEL_BIAS_RES_NORMAL_MASK	(0x7 << 27)

#define PMU_CC3_4387_XTALCORESIZE_PMOS_START_VAL	(0x3F << 0)
#define PMU_CC3_4387_XTALCORESIZE_PMOS_START_MASK	(0x3F << 0)
#define PMU_CC3_4387_XTALCORESIZE_PMOS_NORMAL_VAL	(0x3F << 15)
#define PMU_CC3_4387_XTALCORESIZE_PMOS_NORMAL_MASK	(0x3F << 15)
#define PMU_CC3_4387_XTALCORESIZE_NMOS_START_VAL	(0x3F << 6)
#define PMU_CC3_4387_XTALCORESIZE_NMOS_START_MASK	(0x3F << 6)
#define PMU_CC3_4387_XTALCORESIZE_NMOS_NORMAL_VAL	(0x3F << 21)
#define PMU_CC3_4387_XTALCORESIZE_NMOS_NORMAL_MASK	(0x3F << 21)
#define PMU_CC3_4387_XTALSEL_BIAS_RES_START_VAL		(0x2 << 12)
#define PMU_CC3_4387_XTALSEL_BIAS_RES_START_MASK	(0x7 << 12)
#define PMU_CC3_4387_XTALSEL_BIAS_RES_NORMAL_VAL	(0x5 << 27)
#define PMU_CC3_4387_XTALSEL_BIAS_RES_NORMAL_MASK	(0x7 << 27)

/* PMU chip control4 register */
#define PMU_CHIPCTL4                    4

/* 53537 series moved switch_type and gmac_if_type to CC4 [15:14] and [13:12] */
#define PMU_CC4_IF_TYPE_MASK		0x00003000
#define PMU_CC4_IF_TYPE_RMII		0x00000000
#define PMU_CC4_IF_TYPE_MII		0x00001000
#define PMU_CC4_IF_TYPE_RGMII		0x00002000

#define PMU_CC4_SW_TYPE_MASK		0x0000c000
#define PMU_CC4_SW_TYPE_EPHY		0x00000000
#define PMU_CC4_SW_TYPE_EPHYMII		0x00004000
#define PMU_CC4_SW_TYPE_EPHYRMII	0x00008000
#define PMU_CC4_SW_TYPE_RGMII		0x0000c000
#define PMU_CC4_DISABLE_LQ_AVAIL	(1<<27)

#define PMU_CC4_4369_MAIN_PD_CBUCK2VDDB_ON	(1u << 15u)
#define PMU_CC4_4369_MAIN_PD_CBUCK2VDDRET_ON	(1u << 16u)
#define PMU_CC4_4369_MAIN_PD_MEMLPLDO2VDDB_ON	(1u << 17u)
#define PMU_CC4_4369_MAIN_PD_MEMLPDLO2VDDRET_ON	(1u << 18u)

#define PMU_CC4_4369_AUX_PD_CBUCK2VDDB_ON	(1u << 21u)
#define PMU_CC4_4369_AUX_PD_CBUCK2VDDRET_ON	(1u << 22u)
#define PMU_CC4_4369_AUX_PD_MEMLPLDO2VDDB_ON	(1u << 23u)
#define PMU_CC4_4369_AUX_PD_MEMLPLDO2VDDRET_ON	(1u << 24u)

#define PMU_CC4_4362_PD_CBUCK2VDDB_ON		(1u << 15u)
#define PMU_CC4_4362_PD_CBUCK2VDDRET_ON		(1u << 16u)
#define PMU_CC4_4362_PD_MEMLPLDO2VDDB_ON	(1u << 17u)
#define PMU_CC4_4362_PD_MEMLPDLO2VDDRET_ON	(1u << 18u)

#define PMU_CC4_4378_MAIN_PD_CBUCK2VDDB_ON	(1u << 15u)
#define PMU_CC4_4378_MAIN_PD_CBUCK2VDDRET_ON	(1u << 16u)
#define PMU_CC4_4378_MAIN_PD_MEMLPLDO2VDDB_ON	(1u << 17u)
#define PMU_CC4_4378_MAIN_PD_MEMLPDLO2VDDRET_ON	(1u << 18u)

#define PMU_CC4_4378_AUX_PD_CBUCK2VDDB_ON	(1u << 21u)
#define PMU_CC4_4378_AUX_PD_CBUCK2VDDRET_ON	(1u << 22u)
#define PMU_CC4_4378_AUX_PD_MEMLPLDO2VDDB_ON	(1u << 23u)
#define PMU_CC4_4378_AUX_PD_MEMLPLDO2VDDRET_ON	(1u << 24u)

#define PMU_CC4_4387_MAIN_PD_CBUCK2VDDB_ON	(1u << 15u)
#define PMU_CC4_4387_MAIN_PD_CBUCK2VDDRET_ON	(1u << 16u)
#define PMU_CC4_4387_MAIN_PD_MEMLPLDO2VDDB_ON	(1u << 17u)
#define PMU_CC4_4387_MAIN_PD_MEMLPDLO2VDDRET_ON	(1u << 18u)

#define PMU_CC4_4387_AUX_PD_CBUCK2VDDB_ON	(1u << 21u)
#define PMU_CC4_4387_AUX_PD_CBUCK2VDDRET_ON	(1u << 22u)
#define PMU_CC4_4387_AUX_PD_MEMLPLDO2VDDB_ON	(1u << 23u)
#define PMU_CC4_4387_AUX_PD_MEMLPLDO2VDDRET_ON	(1u << 24u)

/* PMU chip control5 register */
#define PMU_CHIPCTL5                    5

#define PMU_CC5_4369_SUBCORE_CBUCK2VDDB_ON	(1u << 9u)
#define PMU_CC5_4369_SUBCORE_CBUCK2VDDRET_ON	(1u << 10u)
#define PMU_CC5_4369_SUBCORE_MEMLPLDO2VDDB_ON	(1u << 11u)
#define PMU_CC5_4369_SUBCORE_MEMLPLDO2VDDRET_ON	(1u << 12u)

#define PMU_CC5_4362_SUBCORE_CBUCK2VDDB_ON	(1u << 9u)
#define PMU_CC5_4362_SUBCORE_CBUCK2VDDRET_ON	(1u << 10u)
#define PMU_CC5_4362_SUBCORE_MEMLPLDO2VDDB_ON	(1u << 11u)
#define PMU_CC5_4362_SUBCORE_MEMLPLDO2VDDRET_ON	(1u << 12u)

#define PMU_CC5_4378_SUBCORE_CBUCK2VDDB_ON	(1u << 9u)
#define PMU_CC5_4378_SUBCORE_CBUCK2VDDRET_ON	(1u << 10u)
#define PMU_CC5_4378_SUBCORE_MEMLPLDO2VDDB_ON	(1u << 11u)
#define PMU_CC5_4378_SUBCORE_MEMLPLDO2VDDRET_ON	(1u << 12u)

#define PMU_CC5_4387_SUBCORE_CBUCK2VDDB_ON	(1u << 9u)
#define PMU_CC5_4387_SUBCORE_CBUCK2VDDRET_ON	(1u << 10u)
#define PMU_CC5_4387_SUBCORE_MEMLPLDO2VDDB_ON	(1u << 11u)
#define PMU_CC5_4387_SUBCORE_MEMLPLDO2VDDRET_ON	(1u << 12u)

#define PMU_CC5_4388_SUBCORE_SDTCCLK0_ON	(1u << 3u)
#define PMU_CC5_4388_SUBCORE_SDTCCLK1_ON	(1u << 4u)

#define PMU_CC5_4389_SUBCORE_SDTCCLK0_ON	(1u << 3u)
#define PMU_CC5_4389_SUBCORE_SDTCCLK1_ON	(1u << 4u)

/* PMU chip control6 register */
#define PMU_CHIPCTL6                    6
#define PMU_CC6_RX4_CLK_SEQ_SELECT_MASK	BCM_MASK32(1u, 0u)
#define PMU_CC6_ENABLE_DMN1_WAKEUP      (1 << 3)
#define PMU_CC6_ENABLE_CLKREQ_WAKEUP    (1 << 4)
#define PMU_CC6_ENABLE_PMU_WAKEUP_ALP   (1 << 6)
#define PMU_CC6_ENABLE_PCIE_RETENTION	(1 << 12)
#define PMU_CC6_ENABLE_PMU_EXT_PERST	(1 << 13)
#define PMU_CC6_ENABLE_PMU_WAKEUP_PERST	(1 << 14)
#define PMU_CC6_ENABLE_LEGACY_WAKEUP	(1 << 16)

/* PMU chip control7 register */
#define PMU_CHIPCTL7				7
#define PMU_CC7_ENABLE_L2REFCLKPAD_PWRDWN	(1 << 25)
#define PMU_CC7_ENABLE_MDIO_RESET_WAR		(1 << 27)
/* 53537 series have gmca1 gmac_if_type in cc7 [7:6](defalut 0b01) */
#define PMU_CC7_IF_TYPE_MASK		0x000000c0
#define PMU_CC7_IF_TYPE_RMII		0x00000000
#define PMU_CC7_IF_TYPE_MII		0x00000040
#define PMU_CC7_IF_TYPE_RGMII		0x00000080

#define PMU_CHIPCTL8			8
#define PMU_CHIPCTL9			9

#define PMU_CHIPCTL10			10
#define PMU_CC10_PCIE_PWRSW_RESET0_CNT_SHIFT		0
#define PMU_CC10_PCIE_PWRSW_RESET0_CNT_MASK		0x000000ff
#define PMU_CC10_PCIE_PWRSW_RESET1_CNT_SHIFT		8
#define PMU_CC10_PCIE_PWRSW_RESET1_CNT_MASK		0x0000ff00
#define PMU_CC10_PCIE_PWRSW_UP_DLY_SHIFT		16
#define PMU_CC10_PCIE_PWRSW_UP_DLY_MASK		0x000f0000
#define PMU_CC10_PCIE_PWRSW_FORCE_PWROK_DLY_SHIFT	20
#define PMU_CC10_PCIE_PWRSW_FORCE_PWROK_DLY_MASK	0x00f00000
#define PMU_CC10_FORCE_PCIE_ON		(1 << 24)
#define PMU_CC10_FORCE_PCIE_SW_ON	(1 << 25)
#define PMU_CC10_FORCE_PCIE_RETNT_ON	(1 << 26)

#define PMU_CC10_PCIE_PWRSW_RESET_CNT_4US		1
#define PMU_CC10_PCIE_PWRSW_RESET_CNT_8US		2

#define PMU_CC10_PCIE_PWRSW_UP_DLY_0US			0

#define PMU_CC10_PCIE_PWRSW_FORCE_PWROK_DLY_4US	1
#define PMU_CC10_PCIE_RESET0_CNT_SLOW_MASK	(0xFu << 4u)
#define PMU_CC10_PCIE_RESET1_CNT_SLOW_MASK	(0xFu << 12u)

#define PMU_CHIPCTL11			11

/* PMU chip control12 register */
#define PMU_CHIPCTL12			12
#define PMU_CC12_DISABLE_LQ_CLK_ON	(1u << 31u) /* HW4387-254 */

/* PMU chip control13 register */
#define PMU_CHIPCTL13			13

#define PMU_CC13_SUBCORE_CBUCK2VDDB_OFF		(1u << 0u)
#define PMU_CC13_SUBCORE_CBUCK2VDDRET_OFF	(1u << 1u)
#define PMU_CC13_SUBCORE_MEMLPLDO2VDDB_OFF	(1u << 2u)
#define PMU_CC13_SUBCORE_MEMLPLDO2VDDRET_OFF	(1u << 3u)

#define PMU_CC13_MAIN_CBUCK2VDDB_OFF		(1u << 4u)
#define PMU_CC13_MAIN_CBUCK2VDDRET_OFF		(1u << 5u)
#define PMU_CC13_MAIN_MEMLPLDO2VDDB_OFF		(1u << 6u)
#define PMU_CC13_MAIN_MEMLPLDO2VDDRET_OFF	(1u << 7u)

#define PMU_CC13_AUX_CBUCK2VDDB_OFF		(1u << 8u)
#define PMU_CC13_AUX_MEMLPLDO2VDDB_OFF		(1u << 10u)
#define PMU_CC13_AUX_MEMLPLDO2VDDRET_OFF	(1u << 11u)
#define PMU_CC13_AUX_CBUCK2VDDRET_OFF		(1u << 12u)
#define PMU_CC13_CMN_MEMLPLDO2VDDRET_ON		(1u << 18u)

/* HW4368-331 */
#define PMU_CC13_MAIN_ALWAYS_USE_COHERENT_IF0	(1u << 13u)
#define PMU_CC13_MAIN_ALWAYS_USE_COHERENT_IF1	(1u << 14u)
#define PMU_CC13_AUX_ALWAYS_USE_COHERENT_IF0	(1u << 15u)
#define PMU_CC13_AUX_ALWAYS_USE_COHERENT_IF1	(1u << 19u)

#define PMU_CC13_LHL_TIMER_SELECT		(1u << 23u)

#define PMU_CC13_4369_LHL_TIMER_SELECT		(1u << 23u)
#define PMU_CC13_4378_LHL_TIMER_SELECT		(1u << 23u)

#define PMU_CC13_4387_ENAB_RADIO_REG_CLK	(1u << 9u)
#define PMU_CC13_4387_LHL_TIMER_SELECT		(1u << 23u)

#define PMU_CHIPCTL14			14
#define PMU_CHIPCTL15			15
#define PMU_CHIPCTL16			16
#define PMU_CC16_CLK4M_DIS		(1 << 4)
#define PMU_CC16_FF_ZERO_ADJ		(4 << 5)

/* PMU chip control17 register */
#define PMU_CHIPCTL17				17u

#define PMU_CC17_SCAN_DIG_SR_CLK_SHIFT		(2u)
#define PMU_CC17_SCAN_DIG_SR_CLK_MASK		(3u << 2u)
#define PMU_CC17_SCAN_CBUCK2VDDB_OFF		(1u << 8u)
#define PMU_CC17_SCAN_MEMLPLDO2VDDB_OFF		(1u << 10u)
#define PMU_CC17_SCAN_MEMLPLDO2VDDRET_OFF	(1u << 11u)
#define PMU_CC17_SCAN_CBUCK2VDDB_ON		(1u << 24u)
#define PMU_CC17_SCAN_MEMLPLDO2VDDB_ON		(1u << 26u)
#define PMU_CC17_SCAN_MEMLPLDO2VDDRET_ON	(1u << 27u)

#define SCAN_DIG_SR_CLK_80_MHZ		(0)	/* 80 MHz */
#define SCAN_DIG_SR_CLK_53P35_MHZ	(1u)	/* 53.35 MHz */
#define SCAN_DIG_SR_CLK_40_MHZ		(2u)	/* 40 MHz */

/* PMU chip control18 register */
#define PMU_CHIPCTL18				18u

/* Expiry time for wl_SSReset if P channel sleep handshake is not through */
#define PMU_CC18_WL_P_CHAN_TIMER_SEL_OFF	(1u << 1u)
#define PMU_CC18_WL_P_CHAN_TIMER_SEL_MASK	(7u << 1u)

#define PMU_CC18_WL_P_CHAN_TIMER_SEL_8ms	7u	/* (2^(7+1))*32us = 8ms */

/* Enable wl booker to force a P channel sleep handshake upon assertion of wl_SSReset */
#define PMU_CC18_WL_BOOKER_FORCEPWRDWN_EN	(1u << 4u)

/* PMU chip control 19 register */
#define PMU_CHIPCTL19			19u

#define PMU_CC19_ASYNC_ATRESETMN	(1u << 9u)

#define PMU_CHIPCTL23			23
#define PMU_CC23_MACPHYCLK_MASK		(1u << 31u)

#define PMU_CC23_AT_CLK0_ON		(1u << 14u)
#define PMU_CC23_AT_CLK1_ON		(1u << 15u)

/* PMU chip control14 register */
#define PMU_CC14_MAIN_VDDB2VDDRET_UP_DLY_MASK		(0xF)
#define PMU_CC14_MAIN_VDDB2VDD_UP_DLY_MASK		(0xF << 4)
#define PMU_CC14_AUX_VDDB2VDDRET_UP_DLY_MASK		(0xF << 8)
#define PMU_CC14_AUX_VDDB2VDD_UP_DLY_MASK		(0xF << 12)
#define PMU_CC14_PCIE_VDDB2VDDRET_UP_DLY_MASK		(0xF << 16)
#define PMU_CC14_PCIE_VDDB2VDD_UP_DLY_MASK		(0xF << 20)

/* PMU chip control15 register */
#define PMU_CC15_PCIE_VDDB_CURRENT_LIMIT_DELAY_MASK	(0xFu << 4u)
#define PMU_CC15_PCIE_VDDB_FORCE_RPS_PWROK_DELAY_MASK	(0xFu << 8u)

/* PMU corerev and chip specific PLL controls.
 * PMU<rev>_PLL<num>_XX where <rev> is PMU corerev and <num> is an arbitrary number
 * to differentiate different PLLs controlled by the same PMU rev.
 */
/* pllcontrol registers */
/* PDIV, div_phy, div_arm, div_adc, dith_sel, ioff, kpd_scale, lsb_sel, mash_sel, lf_c & lf_r */
#define	PMU0_PLL0_PLLCTL0		0
#define	PMU0_PLL0_PC0_PDIV_MASK		1
#define	PMU0_PLL0_PC0_PDIV_FREQ		25000
#define PMU0_PLL0_PC0_DIV_ARM_MASK	0x00000038
#define PMU0_PLL0_PC0_DIV_ARM_SHIFT	3
#define PMU0_PLL0_PC0_DIV_ARM_BASE	8

/* PC0_DIV_ARM for PLLOUT_ARM */
#define PMU0_PLL0_PC0_DIV_ARM_110MHZ	0
#define PMU0_PLL0_PC0_DIV_ARM_97_7MHZ	1
#define PMU0_PLL0_PC0_DIV_ARM_88MHZ	2
#define PMU0_PLL0_PC0_DIV_ARM_80MHZ	3 /* Default */
#define PMU0_PLL0_PC0_DIV_ARM_73_3MHZ	4
#define PMU0_PLL0_PC0_DIV_ARM_67_7MHZ	5
#define PMU0_PLL0_PC0_DIV_ARM_62_9MHZ	6
#define PMU0_PLL0_PC0_DIV_ARM_58_6MHZ	7

/* Wildcard base, stop_mod, en_lf_tp, en_cal & lf_r2 */
#define	PMU0_PLL0_PLLCTL1		1
#define	PMU0_PLL0_PC1_WILD_INT_MASK	0xf0000000
#define	PMU0_PLL0_PC1_WILD_INT_SHIFT	28
#define	PMU0_PLL0_PC1_WILD_FRAC_MASK	0x0fffff00
#define	PMU0_PLL0_PC1_WILD_FRAC_SHIFT	8
#define	PMU0_PLL0_PC1_STOP_MOD		0x00000040

/* Wildcard base, vco_calvar, vco_swc, vco_var_selref, vso_ical & vco_sel_avdd */
#define	PMU0_PLL0_PLLCTL2		2
#define	PMU0_PLL0_PC2_WILD_INT_MASK	0xf
#define	PMU0_PLL0_PC2_WILD_INT_SHIFT	4

/* pllcontrol registers */
/* ndiv_pwrdn, pwrdn_ch<x>, refcomp_pwrdn, dly_ch<x>, p1div, p2div, _bypass_sdmod */
#define PMU1_PLL0_PLLCTL0		0
#define PMU1_PLL0_PC0_P1DIV_MASK	0x00f00000
#define PMU1_PLL0_PC0_P1DIV_SHIFT	20
#define PMU1_PLL0_PC0_P2DIV_MASK	0x0f000000
#define PMU1_PLL0_PC0_P2DIV_SHIFT	24

/* m<x>div */
#define PMU1_PLL0_PLLCTL1		1
#define PMU1_PLL0_PC1_M1DIV_MASK	0x000000ff
#define PMU1_PLL0_PC1_M1DIV_SHIFT	0
#define PMU1_PLL0_PC1_M2DIV_MASK	0x0000ff00
#define PMU1_PLL0_PC1_M2DIV_SHIFT	8
#define PMU1_PLL0_PC1_M3DIV_MASK	0x00ff0000
#define PMU1_PLL0_PC1_M3DIV_SHIFT	16
#define PMU1_PLL0_PC1_M4DIV_MASK	0xff000000
#define PMU1_PLL0_PC1_M4DIV_SHIFT	24
#define PMU1_PLL0_PC1_M4DIV_BY_9	9
#define PMU1_PLL0_PC1_M4DIV_BY_18	0x12
#define PMU1_PLL0_PC1_M4DIV_BY_36	0x24
#define PMU1_PLL0_PC1_M4DIV_BY_60	0x3C
#define PMU1_PLL0_PC1_M2_M4DIV_MASK     0xff00ff00
#define PMU1_PLL0_PC1_HOLD_LOAD_CH      0x28

#define DOT11MAC_880MHZ_CLK_DIVISOR_SHIFT 8
#define DOT11MAC_880MHZ_CLK_DIVISOR_MASK (0xFF << DOT11MAC_880MHZ_CLK_DIVISOR_SHIFT)
#define DOT11MAC_880MHZ_CLK_DIVISOR_VAL  (0xE << DOT11MAC_880MHZ_CLK_DIVISOR_SHIFT)

/* m<x>div, ndiv_dither_mfb, ndiv_mode, ndiv_int */
#define PMU1_PLL0_PLLCTL2		2
#define PMU1_PLL0_PC2_M5DIV_MASK	0x000000ff
#define PMU1_PLL0_PC2_M5DIV_SHIFT	0
#define PMU1_PLL0_PC2_M5DIV_BY_12	0xc
#define PMU1_PLL0_PC2_M5DIV_BY_18	0x12
#define PMU1_PLL0_PC2_M5DIV_BY_31	0x1f
#define PMU1_PLL0_PC2_M5DIV_BY_36	0x24
#define PMU1_PLL0_PC2_M5DIV_BY_42	0x2a
#define PMU1_PLL0_PC2_M5DIV_BY_60	0x3c
#define PMU1_PLL0_PC2_M6DIV_MASK	0x0000ff00
#define PMU1_PLL0_PC2_M6DIV_SHIFT	8
#define PMU1_PLL0_PC2_M6DIV_BY_18	0x12
#define PMU1_PLL0_PC2_M6DIV_BY_36	0x24
#define PMU1_PLL0_PC2_NDIV_MODE_MASK	0x000e0000
#define PMU1_PLL0_PC2_NDIV_MODE_SHIFT	17
#define PMU1_PLL0_PC2_NDIV_MODE_MASH	1
#define PMU1_PLL0_PC2_NDIV_MODE_MFB	2
#define PMU1_PLL0_PC2_NDIV_INT_MASK	0x1ff00000
#define PMU1_PLL0_PC2_NDIV_INT_SHIFT	20

/* ndiv_frac */
#define PMU1_PLL0_PLLCTL3		3
#define PMU1_PLL0_PC3_NDIV_FRAC_MASK	0x00ffffff
#define PMU1_PLL0_PC3_NDIV_FRAC_SHIFT	0

/* pll_ctrl */
#define PMU1_PLL0_PLLCTL4		4

/* pll_ctrl, vco_rng, clkdrive_ch<x> */
#define PMU1_PLL0_PLLCTL5		5
#define PMU1_PLL0_PC5_CLK_DRV_MASK	0xffffff00
#define PMU1_PLL0_PC5_CLK_DRV_SHIFT	8
#define PMU1_PLL0_PC5_ASSERT_CH_MASK	0x3f000000
#define PMU1_PLL0_PC5_ASSERT_CH_SHIFT	24
#define PMU1_PLL0_PC5_DEASSERT_CH_MASK	0xff000000

#define PMU1_PLL0_PLLCTL6		6
#define PMU1_PLL0_PLLCTL7		7
#define PMU1_PLL0_PLLCTL8		8

#define PMU1_PLLCTL8_OPENLOOP_MASK	(1 << 1)

#define PMU1_PLL0_PLLCTL9		9

#define PMU1_PLL0_PLLCTL10		10

/* PMU rev 2 control words */
#define PMU2_PHY_PLL_PLLCTL		4
#define PMU2_SI_PLL_PLLCTL		10

/* PMU rev 2 */
/* pllcontrol registers */
/* ndiv_pwrdn, pwrdn_ch<x>, refcomp_pwrdn, dly_ch<x>, p1div, p2div, _bypass_sdmod */
#define PMU2_PLL_PLLCTL0		0
#define PMU2_PLL_PC0_P1DIV_MASK		0x00f00000
#define PMU2_PLL_PC0_P1DIV_SHIFT	20
#define PMU2_PLL_PC0_P2DIV_MASK		0x0f000000
#define PMU2_PLL_PC0_P2DIV_SHIFT	24

/* m<x>div */
#define PMU2_PLL_PLLCTL1		1
#define PMU2_PLL_PC1_M1DIV_MASK		0x000000ff
#define PMU2_PLL_PC1_M1DIV_SHIFT	0
#define PMU2_PLL_PC1_M2DIV_MASK		0x0000ff00
#define PMU2_PLL_PC1_M2DIV_SHIFT	8
#define PMU2_PLL_PC1_M3DIV_MASK		0x00ff0000
#define PMU2_PLL_PC1_M3DIV_SHIFT	16
#define PMU2_PLL_PC1_M4DIV_MASK		0xff000000
#define PMU2_PLL_PC1_M4DIV_SHIFT	24

/* m<x>div, ndiv_dither_mfb, ndiv_mode, ndiv_int */
#define PMU2_PLL_PLLCTL2		2
#define PMU2_PLL_PC2_M5DIV_MASK		0x000000ff
#define PMU2_PLL_PC2_M5DIV_SHIFT	0
#define PMU2_PLL_PC2_M6DIV_MASK		0x0000ff00
#define PMU2_PLL_PC2_M6DIV_SHIFT	8
#define PMU2_PLL_PC2_NDIV_MODE_MASK	0x000e0000
#define PMU2_PLL_PC2_NDIV_MODE_SHIFT	17
#define PMU2_PLL_PC2_NDIV_INT_MASK	0x1ff00000
#define PMU2_PLL_PC2_NDIV_INT_SHIFT	20

/* ndiv_frac */
#define PMU2_PLL_PLLCTL3		3
#define PMU2_PLL_PC3_NDIV_FRAC_MASK	0x00ffffff
#define PMU2_PLL_PC3_NDIV_FRAC_SHIFT	0

/* pll_ctrl */
#define PMU2_PLL_PLLCTL4		4

/* pll_ctrl, vco_rng, clkdrive_ch<x> */
#define PMU2_PLL_PLLCTL5		5
#define PMU2_PLL_PC5_CLKDRIVE_CH1_MASK	0x00000f00
#define PMU2_PLL_PC5_CLKDRIVE_CH1_SHIFT	8
#define PMU2_PLL_PC5_CLKDRIVE_CH2_MASK	0x0000f000
#define PMU2_PLL_PC5_CLKDRIVE_CH2_SHIFT	12
#define PMU2_PLL_PC5_CLKDRIVE_CH3_MASK	0x000f0000
#define PMU2_PLL_PC5_CLKDRIVE_CH3_SHIFT	16
#define PMU2_PLL_PC5_CLKDRIVE_CH4_MASK	0x00f00000
#define PMU2_PLL_PC5_CLKDRIVE_CH4_SHIFT	20
#define PMU2_PLL_PC5_CLKDRIVE_CH5_MASK	0x0f000000
#define PMU2_PLL_PC5_CLKDRIVE_CH5_SHIFT	24
#define PMU2_PLL_PC5_CLKDRIVE_CH6_MASK	0xf0000000
#define PMU2_PLL_PC5_CLKDRIVE_CH6_SHIFT	28

/* PMU rev 5 (& 6) */
#define	PMU5_PLL_P1P2_OFF		0
#define	PMU5_PLL_P1_MASK		0x0f000000
#define	PMU5_PLL_P1_SHIFT		24
#define	PMU5_PLL_P2_MASK		0x00f00000
#define	PMU5_PLL_P2_SHIFT		20
#define	PMU5_PLL_M14_OFF		1
#define	PMU5_PLL_MDIV_MASK		0x000000ff
#define	PMU5_PLL_MDIV_WIDTH		8
#define	PMU5_PLL_NM5_OFF		2
#define	PMU5_PLL_NDIV_MASK		0xfff00000
#define	PMU5_PLL_NDIV_SHIFT		20
#define	PMU5_PLL_NDIV_MODE_MASK		0x000e0000
#define	PMU5_PLL_NDIV_MODE_SHIFT	17
#define	PMU5_PLL_FMAB_OFF		3
#define	PMU5_PLL_MRAT_MASK		0xf0000000
#define	PMU5_PLL_MRAT_SHIFT		28
#define	PMU5_PLL_ABRAT_MASK		0x08000000
#define	PMU5_PLL_ABRAT_SHIFT		27
#define	PMU5_PLL_FDIV_MASK		0x07ffffff
#define	PMU5_PLL_PLLCTL_OFF		4
#define	PMU5_PLL_PCHI_OFF		5
#define	PMU5_PLL_PCHI_MASK		0x0000003f

/* pmu XtalFreqRatio */
#define	PMU_XTALFREQ_REG_ILPCTR_MASK	0x00001FFF
#define	PMU_XTALFREQ_REG_MEASURE_MASK	0x80000000
#define	PMU_XTALFREQ_REG_MEASURE_SHIFT	31

/* Divider allocation in 5357 */
#define	PMU5_MAINPLL_CPU		1
#define	PMU5_MAINPLL_MEM		2
#define	PMU5_MAINPLL_SI			3

#define PMU7_PLL_PLLCTL7                7
#define PMU7_PLL_CTL7_M4DIV_MASK	0xff000000
#define PMU7_PLL_CTL7_M4DIV_SHIFT	24
#define PMU7_PLL_CTL7_M4DIV_BY_6	6
#define PMU7_PLL_CTL7_M4DIV_BY_12	0xc
#define PMU7_PLL_CTL7_M4DIV_BY_24	0x18
#define PMU7_PLL_PLLCTL8                8
#define PMU7_PLL_CTL8_M5DIV_MASK	0x000000ff
#define PMU7_PLL_CTL8_M5DIV_SHIFT	0
#define PMU7_PLL_CTL8_M5DIV_BY_8	8
#define PMU7_PLL_CTL8_M5DIV_BY_12	0xc
#define PMU7_PLL_CTL8_M5DIV_BY_24	0x18
#define PMU7_PLL_CTL8_M6DIV_MASK	0x0000ff00
#define PMU7_PLL_CTL8_M6DIV_SHIFT	8
#define PMU7_PLL_CTL8_M6DIV_BY_12	0xc
#define PMU7_PLL_CTL8_M6DIV_BY_24	0x18
#define PMU7_PLL_PLLCTL11		11
#define PMU7_PLL_PLLCTL11_MASK		0xffffff00
#define PMU7_PLL_PLLCTL11_VAL		0x22222200

/* PMU rev 15 */
#define PMU15_PLL_PLLCTL0		0
#define PMU15_PLL_PC0_CLKSEL_MASK	0x00000003
#define PMU15_PLL_PC0_CLKSEL_SHIFT	0
#define PMU15_PLL_PC0_FREQTGT_MASK	0x003FFFFC
#define PMU15_PLL_PC0_FREQTGT_SHIFT	2
#define PMU15_PLL_PC0_PRESCALE_MASK	0x00C00000
#define PMU15_PLL_PC0_PRESCALE_SHIFT	22
#define PMU15_PLL_PC0_KPCTRL_MASK	0x07000000
#define PMU15_PLL_PC0_KPCTRL_SHIFT	24
#define PMU15_PLL_PC0_FCNTCTRL_MASK	0x38000000
#define PMU15_PLL_PC0_FCNTCTRL_SHIFT	27
#define PMU15_PLL_PC0_FDCMODE_MASK	0x40000000
#define PMU15_PLL_PC0_FDCMODE_SHIFT	30
#define PMU15_PLL_PC0_CTRLBIAS_MASK	0x80000000
#define PMU15_PLL_PC0_CTRLBIAS_SHIFT	31

#define PMU15_PLL_PLLCTL1			1
#define PMU15_PLL_PC1_BIAS_CTLM_MASK		0x00000060
#define PMU15_PLL_PC1_BIAS_CTLM_SHIFT		5
#define PMU15_PLL_PC1_BIAS_CTLM_RST_MASK	0x00000040
#define PMU15_PLL_PC1_BIAS_CTLM_RST_SHIFT	6
#define PMU15_PLL_PC1_BIAS_SS_DIVR_MASK		0x0001FF80
#define PMU15_PLL_PC1_BIAS_SS_DIVR_SHIFT	7
#define PMU15_PLL_PC1_BIAS_SS_RSTVAL_MASK	0x03FE0000
#define PMU15_PLL_PC1_BIAS_SS_RSTVAL_SHIFT	17
#define PMU15_PLL_PC1_BIAS_INTG_BW_MASK		0x0C000000
#define PMU15_PLL_PC1_BIAS_INTG_BW_SHIFT	26
#define PMU15_PLL_PC1_BIAS_INTG_BYP_MASK	0x10000000
#define PMU15_PLL_PC1_BIAS_INTG_BYP_SHIFT	28
#define PMU15_PLL_PC1_OPENLP_EN_MASK		0x40000000
#define PMU15_PLL_PC1_OPENLP_EN_SHIFT		30

#define PMU15_PLL_PLLCTL2			2
#define PMU15_PLL_PC2_CTEN_MASK			0x00000001
#define PMU15_PLL_PC2_CTEN_SHIFT		0

#define PMU15_PLL_PLLCTL3			3
#define PMU15_PLL_PC3_DITHER_EN_MASK		0x00000001
#define PMU15_PLL_PC3_DITHER_EN_SHIFT		0
#define PMU15_PLL_PC3_DCOCTLSP_MASK		0xFE000000
#define PMU15_PLL_PC3_DCOCTLSP_SHIFT		25
#define PMU15_PLL_PC3_DCOCTLSP_DIV2EN_MASK	0x01
#define PMU15_PLL_PC3_DCOCTLSP_DIV2EN_SHIFT	0
#define PMU15_PLL_PC3_DCOCTLSP_CH0EN_MASK	0x02
#define PMU15_PLL_PC3_DCOCTLSP_CH0EN_SHIFT	1
#define PMU15_PLL_PC3_DCOCTLSP_CH1EN_MASK	0x04
#define PMU15_PLL_PC3_DCOCTLSP_CH1EN_SHIFT	2
#define PMU15_PLL_PC3_DCOCTLSP_CH0SEL_MASK	0x18
#define PMU15_PLL_PC3_DCOCTLSP_CH0SEL_SHIFT	3
#define PMU15_PLL_PC3_DCOCTLSP_CH1SEL_MASK	0x60
#define PMU15_PLL_PC3_DCOCTLSP_CH1SEL_SHIFT	5
#define PMU15_PLL_PC3_DCOCTLSP_CHSEL_OUTP_DIV1	0
#define PMU15_PLL_PC3_DCOCTLSP_CHSEL_OUTP_DIV2	1
#define PMU15_PLL_PC3_DCOCTLSP_CHSEL_OUTP_DIV3	2
#define PMU15_PLL_PC3_DCOCTLSP_CHSEL_OUTP_DIV5	3

#define PMU15_PLL_PLLCTL4			4
#define PMU15_PLL_PC4_FLLCLK1_DIV_MASK		0x00000007
#define PMU15_PLL_PC4_FLLCLK1_DIV_SHIFT		0
#define PMU15_PLL_PC4_FLLCLK2_DIV_MASK		0x00000038
#define PMU15_PLL_PC4_FLLCLK2_DIV_SHIFT		3
#define PMU15_PLL_PC4_FLLCLK3_DIV_MASK		0x000001C0
#define PMU15_PLL_PC4_FLLCLK3_DIV_SHIFT		6
#define PMU15_PLL_PC4_DBGMODE_MASK		0x00000E00
#define PMU15_PLL_PC4_DBGMODE_SHIFT		9
#define PMU15_PLL_PC4_FLL480_CTLSP_LK_MASK	0x00001000
#define PMU15_PLL_PC4_FLL480_CTLSP_LK_SHIFT	12
#define PMU15_PLL_PC4_FLL480_CTLSP_MASK		0x000FE000
#define PMU15_PLL_PC4_FLL480_CTLSP_SHIFT	13
#define PMU15_PLL_PC4_DINPOL_MASK		0x00100000
#define PMU15_PLL_PC4_DINPOL_SHIFT		20
#define PMU15_PLL_PC4_CLKOUT_PD_MASK		0x00200000
#define PMU15_PLL_PC4_CLKOUT_PD_SHIFT		21
#define PMU15_PLL_PC4_CLKDIV2_PD_MASK		0x00400000
#define PMU15_PLL_PC4_CLKDIV2_PD_SHIFT		22
#define PMU15_PLL_PC4_CLKDIV4_PD_MASK		0x00800000
#define PMU15_PLL_PC4_CLKDIV4_PD_SHIFT		23
#define PMU15_PLL_PC4_CLKDIV8_PD_MASK		0x01000000
#define PMU15_PLL_PC4_CLKDIV8_PD_SHIFT		24
#define PMU15_PLL_PC4_CLKDIV16_PD_MASK		0x02000000
#define PMU15_PLL_PC4_CLKDIV16_PD_SHIFT		25
#define PMU15_PLL_PC4_TEST_EN_MASK		0x04000000
#define PMU15_PLL_PC4_TEST_EN_SHIFT		26

#define PMU15_PLL_PLLCTL5			5
#define PMU15_PLL_PC5_FREQTGT_MASK		0x000FFFFF
#define PMU15_PLL_PC5_FREQTGT_SHIFT		0
#define PMU15_PLL_PC5_DCOCTLSP_MASK		0x07F00000
#define PMU15_PLL_PC5_DCOCTLSP_SHIFT		20
#define PMU15_PLL_PC5_PRESCALE_MASK		0x18000000
#define PMU15_PLL_PC5_PRESCALE_SHIFT		27

#define PMU15_PLL_PLLCTL6		6
#define PMU15_PLL_PC6_FREQTGT_MASK	0x000FFFFF
#define PMU15_PLL_PC6_FREQTGT_SHIFT	0
#define PMU15_PLL_PC6_DCOCTLSP_MASK	0x07F00000
#define PMU15_PLL_PC6_DCOCTLSP_SHIFT	20
#define PMU15_PLL_PC6_PRESCALE_MASK	0x18000000
#define PMU15_PLL_PC6_PRESCALE_SHIFT	27

#define PMU15_FREQTGT_480_DEFAULT	0x19AB1
#define PMU15_FREQTGT_492_DEFAULT	0x1A4F5
#define PMU15_ARM_96MHZ			96000000	/**< 96 Mhz */
#define PMU15_ARM_98MHZ			98400000	/**< 98.4 Mhz */
#define PMU15_ARM_97MHZ			97000000	/**< 97 Mhz */

#define PMU17_PLLCTL2_NDIVTYPE_MASK		0x00000070
#define PMU17_PLLCTL2_NDIVTYPE_SHIFT		4

#define PMU17_PLLCTL2_NDIV_MODE_INT		0
#define PMU17_PLLCTL2_NDIV_MODE_INT1B8		1
#define PMU17_PLLCTL2_NDIV_MODE_MASH111		2
#define PMU17_PLLCTL2_NDIV_MODE_MASH111B8	3

#define PMU17_PLLCTL0_BBPLL_PWRDWN		0
#define PMU17_PLLCTL0_BBPLL_DRST		3
#define PMU17_PLLCTL0_BBPLL_DISBL_CLK		8

/* PLL usage in 4716/47162 */
#define	PMU4716_MAINPLL_PLL0		12

/* PLL Usages for 4368 */
#define PMU4368_P1DIV_LO_SHIFT			0
#define PMU4368_P1DIV_HI_SHIFT			2

#define PMU4368_PLL1_PC4_P1DIV_MASK		0xC0000000
#define PMU4368_PLL1_PC4_P1DIV_SHIFT		30
#define PMU4368_PLL1_PC5_P1DIV_MASK		0x00000003
#define PMU4368_PLL1_PC5_P1DIV_SHIFT		0
#define PMU4368_PLL1_PC5_NDIV_INT_MASK		0x00000ffc
#define PMU4368_PLL1_PC5_NDIV_INT_SHIFT		2
#define PMU4368_PLL1_PC5_NDIV_FRAC_MASK		0xfffff000
#define PMU4368_PLL1_PC5_NDIV_FRAC_SHIFT	12

/* PLL usage in 4369 */
#define PMU4369_PLL0_PC2_PDIV_MASK		0x000f0000
#define PMU4369_PLL0_PC2_PDIV_SHIFT		16
#define PMU4369_PLL0_PC2_NDIV_INT_MASK		0x3ff00000
#define PMU4369_PLL0_PC2_NDIV_INT_SHIFT		20
#define PMU4369_PLL0_PC3_NDIV_FRAC_MASK		0x000fffff
#define PMU4369_PLL0_PC3_NDIV_FRAC_SHIFT	0
#define PMU4369_PLL1_PC5_P1DIV_MASK		0xc0000000
#define PMU4369_PLL1_PC5_P1DIV_SHIFT		30
#define PMU4369_PLL1_PC6_P1DIV_MASK		0x00000003
#define PMU4369_PLL1_PC6_P1DIV_SHIFT		0
#define PMU4369_PLL1_PC6_NDIV_INT_MASK		0x00000ffc
#define PMU4369_PLL1_PC6_NDIV_INT_SHIFT		2
#define PMU4369_PLL1_PC6_NDIV_FRAC_MASK		0xfffff000
#define PMU4369_PLL1_PC6_NDIV_FRAC_SHIFT	12

#define PMU4369_P1DIV_LO_SHIFT		0
#define PMU4369_P1DIV_HI_SHIFT		2

#define PMU4369_PLL6VAL_P1DIV			4
#define PMU4369_PLL6VAL_P1DIV_BIT3_2		1
#define PMU4369_PLL6VAL_PRE_SCALE		(1 << 17)
#define PMU4369_PLL6VAL_POST_SCALE		(1 << 3)

/* PLL usage in 4378
* Temporay setting, update is needed.
*/
#define PMU4378_PLL0_PC2_P1DIV_MASK		0x000f0000
#define PMU4378_PLL0_PC2_P1DIV_SHIFT		16
#define PMU4378_PLL0_PC2_NDIV_INT_MASK		0x3ff00000
#define PMU4378_PLL0_PC2_NDIV_INT_SHIFT		20

/* PLL usage in 4387 */
#define PMU4387_PLL0_PC1_ICH2_MDIV_SHIFT	18
#define PMU4387_PLL0_PC1_ICH2_MDIV_MASK		0x07FC0000
#define PMU4387_PLL0_PC2_ICH3_MDIV_MASK		0x000001ff

/* PLL usage in 4388 */
#define PMU4388_APLL_NDIV_P			0x154u
#define PMU4388_APLL_NDIV_Q			0x1ffu
#define PMU4388_APLL_PDIV			0x3u
#define PMU4388_ARMPLL_I_NDIV_INT_MASK		0x01ff8000u
#define PMU4388_ARMPLL_I_NDIV_INT_SHIFT		15u

/* PLL usage in 4389 */
#define PMU4389_APLL_NDIV_P			0x154u
#define PMU4389_APLL_NDIV_Q			0x1ffu
#define PMU4389_APLL_PDIV			0x3u
#define PMU4389_ARMPLL_I_NDIV_INT_MASK		0x01ff8000u
#define PMU4389_ARMPLL_I_NDIV_INT_SHIFT		15u

/* 5357 Chip specific ChipControl register bits */
#define CCTRL5357_EXTPA                 (1<<14) /* extPA in ChipControl 1, bit 14 */
#define CCTRL5357_ANT_MUX_2o3		(1<<15) /* 2o3 in ChipControl 1, bit 15 */
#define CCTRL5357_NFLASH		(1<<16) /* Nandflash in ChipControl 1, bit 16 */
/* 43217 Chip specific ChipControl register bits */
#define CCTRL43217_EXTPA_C0             (1<<13) /* core0 extPA in ChipControl 1, bit 13 */
#define CCTRL43217_EXTPA_C1             (1<<8)  /* core1 extPA in ChipControl 1, bit 8 */

#define PMU1_PLL0_CHIPCTL0		0
#define PMU1_PLL0_CHIPCTL1		1
#define PMU1_PLL0_CHIPCTL2		2

#define SOCDEVRAM_BP_ADDR		0x1E000000
#define SOCDEVRAM_ARM_ADDR		0x00800000

#define PMU_VREG0_I_SR_CNTL_EN_SHIFT		0
#define PMU_VREG0_DISABLE_PULLD_BT_SHIFT	2
#define PMU_VREG0_DISABLE_PULLD_WL_SHIFT	3
#define PMU_VREG0_CBUCKFSW_ADJ_SHIFT		7
#define PMU_VREG0_CBUCKFSW_ADJ_MASK			0x1F
#define PMU_VREG0_RAMP_SEL_SHIFT			13
#define PMU_VREG0_RAMP_SEL_MASK				0x7
#define PMU_VREG0_VFB_RSEL_SHIFT			17
#define PMU_VREG0_VFB_RSEL_MASK				3

#define PMU_VREG4_ADDR			4

#define PMU_VREG4_CLDO_PWM_SHIFT	4
#define PMU_VREG4_CLDO_PWM_MASK		0x7

#define PMU_VREG4_LPLDO1_SHIFT		15
#define PMU_VREG4_LPLDO1_MASK		0x7
#define PMU_VREG4_LPLDO1_1p20V		0
#define PMU_VREG4_LPLDO1_1p15V		1
#define PMU_VREG4_LPLDO1_1p10V		2
#define PMU_VREG4_LPLDO1_1p25V		3
#define PMU_VREG4_LPLDO1_1p05V		4
#define PMU_VREG4_LPLDO1_1p00V		5
#define PMU_VREG4_LPLDO1_0p95V		6
#define PMU_VREG4_LPLDO1_0p90V		7

#define PMU_VREG4_LPLDO2_LVM_SHIFT	18
#define PMU_VREG4_LPLDO2_LVM_MASK	0x7
#define PMU_VREG4_LPLDO2_HVM_SHIFT	21
#define PMU_VREG4_LPLDO2_HVM_MASK	0x7
#define PMU_VREG4_LPLDO2_LVM_HVM_MASK	0x3f
#define PMU_VREG4_LPLDO2_1p00V		0
#define PMU_VREG4_LPLDO2_1p15V		1
#define PMU_VREG4_LPLDO2_1p20V		2
#define PMU_VREG4_LPLDO2_1p10V		3
#define PMU_VREG4_LPLDO2_0p90V		4	/**< 4 - 7 is 0.90V */

#define PMU_VREG4_HSICLDO_BYPASS_SHIFT	27
#define PMU_VREG4_HSICLDO_BYPASS_MASK	0x1

#define PMU_VREG5_ADDR			5
#define PMU_VREG5_HSICAVDD_PD_SHIFT	6
#define PMU_VREG5_HSICAVDD_PD_MASK	0x1
#define PMU_VREG5_HSICDVDD_PD_SHIFT	11
#define PMU_VREG5_HSICDVDD_PD_MASK	0x1

/* 43228 chipstatus  reg bits */
#define	CST43228_OTP_PRESENT		0x2

/* 4360 Chip specific ChipControl register bits */
/* 43602 uses these ChipControl definitions as well */
#define CCTRL4360_I2C_MODE			(1 << 0)
#define CCTRL4360_UART_MODE			(1 << 1)
#define CCTRL4360_SECI_MODE			(1 << 2)
#define CCTRL4360_BTSWCTRL_MODE			(1 << 3)
#define CCTRL4360_DISCRETE_FEMCTRL_MODE		(1 << 4)
#define CCTRL4360_DIGITAL_PACTRL_MODE		(1 << 5)
#define CCTRL4360_BTSWCTRL_AND_DIGPA_PRESENT	(1 << 6)
#define CCTRL4360_EXTRA_GPIO_MODE		(1 << 7)
#define CCTRL4360_EXTRA_FEMCTRL_MODE		(1 << 8)
#define CCTRL4360_BT_LGCY_MODE			(1 << 9)
#define CCTRL4360_CORE2FEMCTRL4_ON		(1 << 21)
#define CCTRL4360_SECI_ON_GPIO01		(1 << 24)

/* 4360 Chip specific Regulator Control register bits */
#define RCTRL4360_RFLDO_PWR_DOWN		(1 << 1)

/* 4360 PMU resources and chip status bits */
#define RES4360_REGULATOR          0
#define RES4360_ILP_AVAIL          1
#define RES4360_ILP_REQ            2
#define RES4360_XTAL_LDO_PU        3
#define RES4360_XTAL_PU            4
#define RES4360_ALP_AVAIL          5
#define RES4360_BBPLLPWRSW_PU      6
#define RES4360_HT_AVAIL           7
#define RES4360_OTP_PU             8
#define RES4360_AVB_PLL_PWRSW_PU   9
#define RES4360_PCIE_TL_CLK_AVAIL  10

#define CST4360_XTAL_40MZ                  0x00000001
#define CST4360_SFLASH                     0x00000002
#define CST4360_SPROM_PRESENT              0x00000004
#define CST4360_SFLASH_TYPE                0x00000004
#define CST4360_OTP_ENABLED                0x00000008
#define CST4360_REMAP_ROM                  0x00000010
#define CST4360_RSRC_INIT_MODE_MASK        0x00000060
#define CST4360_RSRC_INIT_MODE_SHIFT       5
#define CST4360_ILP_DIVEN                  0x00000080
#define CST4360_MODE_USB                   0x00000100
#define CST4360_SPROM_SIZE_MASK            0x00000600
#define CST4360_SPROM_SIZE_SHIFT           9
#define CST4360_BBPLL_LOCK                 0x00000800
#define CST4360_AVBBPLL_LOCK               0x00001000
#define CST4360_USBBBPLL_LOCK              0x00002000
#define CST4360_RSRC_INIT_MODE(cs)	((cs & CST4360_RSRC_INIT_MODE_MASK) >> \
						CST4360_RSRC_INIT_MODE_SHIFT)

#define CCTRL_4360_UART_SEL		0x2

#define CST4360_RSRC_INIT_MODE(cs)	((cs & CST4360_RSRC_INIT_MODE_MASK) >> \
						CST4360_RSRC_INIT_MODE_SHIFT)

#define PMU4360_CC1_GPIO7_OVRD          (1<<23) /* GPIO7 override */

/* 43602 PMU resources based on pmu_params.xls version v0.95 */
#define RES43602_LPLDO_PU		0
#define RES43602_REGULATOR		1
#define RES43602_PMU_SLEEP		2
#define RES43602_RSVD_3			3
#define RES43602_XTALLDO_PU		4
#define RES43602_SERDES_PU		5
#define RES43602_BBPLL_PWRSW_PU		6
#define RES43602_SR_CLK_START		7
#define RES43602_SR_PHY_PWRSW		8
#define RES43602_SR_SUBCORE_PWRSW	9
#define RES43602_XTAL_PU		10
#define	RES43602_PERST_OVR		11
#define RES43602_SR_CLK_STABLE		12
#define RES43602_SR_SAVE_RESTORE	13
#define RES43602_SR_SLEEP		14
#define RES43602_LQ_START		15
#define RES43602_LQ_AVAIL		16
#define RES43602_WL_CORE_RDY		17
#define RES43602_ILP_REQ		18
#define RES43602_ALP_AVAIL		19
#define RES43602_RADIO_PU		20
#define RES43602_RFLDO_PU		21
#define RES43602_HT_START		22
#define RES43602_HT_AVAIL		23
#define RES43602_MACPHY_CLKAVAIL	24
#define RES43602_PARLDO_PU		25
#define RES43602_RSVD_26		26

/* 43602 chip status bits */
#define CST43602_SPROM_PRESENT             (1<<1)
#define CST43602_SPROM_SIZE                (1<<10) /* 0 = 16K, 1 = 4K */
#define CST43602_BBPLL_LOCK                (1<<11)
#define CST43602_RF_LDO_OUT_OK             (1<<15) /* RF LDO output OK */

#define PMU43602_CC1_GPIO12_OVRD           (1<<28) /* GPIO12 override */

#define PMU43602_CC2_PCIE_CLKREQ_L_WAKE_EN (1<<1)  /* creates gated_pcie_wake, pmu_wakeup logic */
#define PMU43602_CC2_PCIE_PERST_L_WAKE_EN  (1<<2)  /* creates gated_pcie_wake, pmu_wakeup logic */
#define PMU43602_CC2_ENABLE_L2REFCLKPAD_PWRDWN (1<<3)
#define PMU43602_CC2_PMU_WAKE_ALP_AVAIL_EN (1<<5)  /* enable pmu_wakeup to request for ALP_AVAIL */
#define PMU43602_CC2_PERST_L_EXTEND_EN     (1<<9)  /* extend perst_l until rsc PERST_OVR comes up */
#define PMU43602_CC2_FORCE_EXT_LPO         (1<<19) /* 1=ext LPO clock is the final LPO clock */
#define PMU43602_CC2_XTAL32_SEL            (1<<30) /* 0=ext_clock, 1=xtal */

#define CC_SR1_43602_SR_ASM_ADDR	(0x0)

/* PLL CTL register values for open loop, used during S/R operation */
#define PMU43602_PLL_CTL6_VAL		0x68000528
#define PMU43602_PLL_CTL7_VAL		0x6

#define PMU43602_CC3_ARMCR4_DBG_CLK	(1 << 29)

#define CC_SR0_43602_SR_ENG_EN_MASK		0x1
#define CC_SR0_43602_SR_ENG_EN_SHIFT             0

/* GCI function sel values */
#define CC_FNSEL_HWDEF		(0u)
#define CC_FNSEL_SAMEASPIN	(1u)
#define CC_FNSEL_GPIO0		(2u)
#define CC_FNSEL_GPIO1		(3u)
#define CC_FNSEL_GCI0		(4u)
#define CC_FNSEL_GCI1		(5u)
#define CC_FNSEL_UART		(6u)
#define CC_FNSEL_SFLASH		(7u)
#define CC_FNSEL_SPROM		(8u)
#define CC_FNSEL_MISC0		(9u)
#define CC_FNSEL_MISC1		(10u)
#define CC_FNSEL_MISC2		(11u)
#define CC_FNSEL_IND		(12u)
#define CC_FNSEL_PDN		(13u)
#define CC_FNSEL_PUP		(14u)
#define CC_FNSEL_TRI		(15u)

/* 4387 GCI function sel values */
#define CC4387_FNSEL_FUART		(3u)
#define CC4387_FNSEL_DBG_UART		(6u)
#define CC4387_FNSEL_SPI		(7u)

/* Indices of PMU voltage regulator registers */
#define PMU_VREG_0	(0u)
#define PMU_VREG_1	(1u)
#define PMU_VREG_2	(2u)
#define PMU_VREG_3	(3u)
#define PMU_VREG_4	(4u)
#define PMU_VREG_5	(5u)
#define PMU_VREG_6	(6u)
#define PMU_VREG_7	(7u)
#define PMU_VREG_8	(8u)
#define PMU_VREG_9	(9u)
#define PMU_VREG_10	(10u)
#define PMU_VREG_11	(11u)
#define PMU_VREG_12	(12u)
#define PMU_VREG_13	(13u)
#define PMU_VREG_14	(14u)
#define PMU_VREG_15	(15u)
#define PMU_VREG_16	(16u)

/* 43012 Chipcommon ChipStatus bits */
#define CST43012_FLL_LOCK	(1 << 13)
/* 43012 resources - End */

/* 43012 related Cbuck modes */
#define PMU_43012_VREG8_DYNAMIC_CBUCK_MODE0 0x00001c03
#define PMU_43012_VREG9_DYNAMIC_CBUCK_MODE0 0x00492490
#define PMU_43012_VREG8_DYNAMIC_CBUCK_MODE1 0x00001c03
#define PMU_43012_VREG9_DYNAMIC_CBUCK_MODE1 0x00490410

/* 43012 related dynamic cbuck mode mask */
#define PMU_43012_VREG8_DYNAMIC_CBUCK_MODE_MASK  0xFFFFFC07
#define PMU_43012_VREG9_DYNAMIC_CBUCK_MODE_MASK  0xFFFFFFFF

/* 4369 related VREG masks */
#define PMU_4369_VREG_5_MISCLDO_POWER_UP_MASK		(1u << 11u)
#define PMU_4369_VREG_5_MISCLDO_POWER_UP_SHIFT		11u
#define PMU_4369_VREG_5_LPLDO_POWER_UP_MASK		(1u << 27u)
#define PMU_4369_VREG_5_LPLDO_POWER_UP_SHIFT		27u
#define PMU_4369_VREG_5_LPLDO_OP_VLT_ADJ_CTRL_MASK	BCM_MASK32(23u, 20u)
#define PMU_4369_VREG_5_LPLDO_OP_VLT_ADJ_CTRL_SHIFT	20u
#define PMU_4369_VREG_5_MEMLPLDO_OP_VLT_ADJ_CTRL_MASK	BCM_MASK32(31, 28)
#define PMU_4369_VREG_5_MEMLPLDO_OP_VLT_ADJ_CTRL_SHIFT	28u

#define PMU_4369_VREG_6_MEMLPLDO_POWER_UP_MASK		(1u << 3u)
#define PMU_4369_VREG_6_MEMLPLDO_POWER_UP_SHIFT		3u

#define PMU_4369_VREG_7_PMU_FORCE_HP_MODE_MASK		(1u << 27u)
#define PMU_4369_VREG_7_PMU_FORCE_HP_MODE_SHIFT		27u
#define PMU_4369_VREG_7_WL_PMU_LP_MODE_MASK		(1u << 28u)
#define PMU_4369_VREG_7_WL_PMU_LP_MODE_SHIFT		28u
#define PMU_4369_VREG_7_WL_PMU_LV_MODE_MASK		(1u << 29u)
#define PMU_4369_VREG_7_WL_PMU_LV_MODE_SHIFT		29u

#define PMU_4369_VREG8_ASR_OVADJ_LPPFM_MASK		BCM_MASK32(4, 0)
#define PMU_4369_VREG8_ASR_OVADJ_LPPFM_SHIFT		0u

#define PMU_4369_VREG13_RSRC_EN0_ASR_MASK		BCM_MASK32(9, 9)
#define PMU_4369_VREG13_RSRC_EN0_ASR_SHIFT		9u
#define PMU_4369_VREG13_RSRC_EN1_ASR_MASK		BCM_MASK32(10, 10)
#define PMU_4369_VREG13_RSRC_EN1_ASR_SHIFT		10u
#define PMU_4369_VREG13_RSRC_EN2_ASR_MASK		BCM_MASK32(11, 11)
#define PMU_4369_VREG13_RSRC_EN2_ASR_SHIFT		11u

#define PMU_4369_VREG14_RSRC_EN_CSR_MASK0_MASK		(1u << 23u)
#define PMU_4369_VREG14_RSRC_EN_CSR_MASK0_SHIFT		23u

#define PMU_4369_VREG16_RSRC0_CBUCK_MODE_MASK		BCM_MASK32(2, 0)
#define PMU_4369_VREG16_RSRC0_CBUCK_MODE_SHIFT		0u
#define PMU_4369_VREG16_RSRC0_ABUCK_MODE_MASK		BCM_MASK32(17, 15)
#define PMU_4369_VREG16_RSRC0_ABUCK_MODE_SHIFT		15u
#define PMU_4369_VREG16_RSRC1_ABUCK_MODE_MASK		BCM_MASK32(20, 18)
#define PMU_4369_VREG16_RSRC1_ABUCK_MODE_SHIFT		18u
#define PMU_4369_VREG16_RSRC2_ABUCK_MODE_MASK		BCM_MASK32(23, 21)
#define PMU_4369_VREG16_RSRC2_ABUCK_MODE_SHIFT		21u

/* 4362 related VREG masks */
#define PMU_4362_VREG_5_MISCLDO_POWER_UP_MASK		(1u << 11u)
#define PMU_4362_VREG_5_MISCLDO_POWER_UP_SHIFT		(11u)
#define PMU_4362_VREG_5_LPLDO_POWER_UP_MASK		(1u << 27u)
#define PMU_4362_VREG_5_LPLDO_POWER_UP_SHIFT		(27u)
#define PMU_4362_VREG_5_MEMLPLDO_OP_VLT_ADJ_CTRL_MASK	BCM_MASK32(31, 28)
#define PMU_4362_VREG_5_MEMLPLDO_OP_VLT_ADJ_CTRL_SHIFT	(28u)
#define PMU_4362_VREG_6_MEMLPLDO_POWER_UP_MASK		(1u << 3u)
#define PMU_4362_VREG_6_MEMLPLDO_POWER_UP_SHIFT		(3u)

#define PMU_4362_VREG_7_PMU_FORCE_HP_MODE_MASK		(1u << 27u)
#define PMU_4362_VREG_7_PMU_FORCE_HP_MODE_SHIFT		(27u)
#define PMU_4362_VREG_7_WL_PMU_LP_MODE_MASK		(1u << 28u)
#define PMU_4362_VREG_7_WL_PMU_LP_MODE_SHIFT		(28u)
#define PMU_4362_VREG_7_WL_PMU_LV_MODE_MASK		(1u << 29u)
#define PMU_4362_VREG_7_WL_PMU_LV_MODE_SHIFT		(29u)

#define PMU_4362_VREG8_ASR_OVADJ_LPPFM_MASK		BCM_MASK32(4, 0)
#define PMU_4362_VREG8_ASR_OVADJ_LPPFM_SHIFT		(0u)

#define PMU_4362_VREG8_ASR_OVADJ_PFM_MASK		BCM_MASK32(9, 5)
#define PMU_4362_VREG8_ASR_OVADJ_PFM_SHIFT		(5u)

#define PMU_4362_VREG8_ASR_OVADJ_PWM_MASK		BCM_MASK32(14, 10)
#define PMU_4362_VREG8_ASR_OVADJ_PWM_SHIFT		(10u)

#define PMU_4362_VREG13_RSRC_EN0_ASR_MASK		BCM_MASK32(9, 9)
#define PMU_4362_VREG13_RSRC_EN0_ASR_SHIFT		9u
#define PMU_4362_VREG13_RSRC_EN1_ASR_MASK		BCM_MASK32(10, 10)
#define PMU_4362_VREG13_RSRC_EN1_ASR_SHIFT		10u
#define PMU_4362_VREG13_RSRC_EN2_ASR_MASK		BCM_MASK32(11, 11)
#define PMU_4362_VREG13_RSRC_EN2_ASR_SHIFT		11u

#define PMU_4362_VREG14_RSRC_EN_CSR_MASK0_MASK		(1u << 23u)
#define PMU_4362_VREG14_RSRC_EN_CSR_MASK0_SHIFT		(23u)

#define PMU_4362_VREG16_RSRC0_CBUCK_MODE_MASK		BCM_MASK32(2, 0)
#define PMU_4362_VREG16_RSRC0_CBUCK_MODE_SHIFT		(0u)
#define PMU_4362_VREG16_RSRC0_ABUCK_MODE_MASK		BCM_MASK32(17, 15)
#define PMU_4362_VREG16_RSRC0_ABUCK_MODE_SHIFT		(15u)
#define PMU_4362_VREG16_RSRC1_ABUCK_MODE_MASK		BCM_MASK32(20, 18)
#define PMU_4362_VREG16_RSRC1_ABUCK_MODE_SHIFT		(18u)
#define PMU_4362_VREG16_RSRC2_ABUCK_MODE_MASK		BCM_MASK32(23, 21)
#define PMU_4362_VREG16_RSRC2_ABUCK_MODE_SHIFT		21u

#define VREG0_4378_CSR_VOLT_ADJ_PWM_MASK		0x00001F00u
#define VREG0_4378_CSR_VOLT_ADJ_PWM_SHIFT		8u
#define VREG0_4378_CSR_VOLT_ADJ_PFM_MASK		0x0003E000u
#define VREG0_4378_CSR_VOLT_ADJ_PFM_SHIFT		13u
#define VREG0_4378_CSR_VOLT_ADJ_LP_PFM_MASK		0x007C0000u
#define VREG0_4378_CSR_VOLT_ADJ_LP_PFM_SHIFT		18u
#define VREG0_4378_CSR_OUT_VOLT_TRIM_ADJ_MASK		0x07800000u
#define VREG0_4378_CSR_OUT_VOLT_TRIM_ADJ_SHIFT		23u

#define PMU_4387_VREG1_CSR_OVERI_DIS_MASK		(1u << 22u)
#define PMU_4387_VREG6_WL_PMU_LV_MODE_MASK		(0x00000002u)
#define PMU_4387_VREG6_MEMLDO_PU_MASK			(0x00000008u)
#define PMU_4387_VREG8_ASR_OVERI_DIS_MASK		(1u << 7u)

#define PMU_4388_VREG6_WL_PMU_LV_MODE_SHIFT		(1u)
#define PMU_4388_VREG6_WL_PMU_LV_MODE_MASK		(1u << PMU_4388_VREG6_WL_PMU_LV_MODE_SHIFT)
#define PMU_4388_VREG6_MEMLDO_PU_SHIFT			(3u)
#define PMU_4388_VREG6_MEMLDO_PU_MASK			(1u << PMU_4388_VREG6_MEMLDO_PU_SHIFT)

#define PMU_4389_VREG6_WL_PMU_LV_MODE_SHIFT		(1u)
#define PMU_4389_VREG6_WL_PMU_LV_MODE_MASK		(1u << PMU_4389_VREG6_WL_PMU_LV_MODE_SHIFT)
#define PMU_4389_VREG6_MEMLDO_PU_SHIFT			(3u)
#define PMU_4389_VREG6_MEMLDO_PU_MASK			(1u << PMU_4389_VREG6_MEMLDO_PU_SHIFT)

#define PMU_VREG13_ASR_OVADJ_PWM_MASK			(0x001F0000u)
#define PMU_VREG13_ASR_OVADJ_PWM_SHIFT			(16u)

#define PMU_VREG14_RSRC_EN_ASR_PWM_PFM_MASK		(1u << 18u)
#define PMU_VREG14_RSRC_EN_ASR_PWM_PFM_SHIFT		(18u)

#define CSR_VOLT_ADJ_PWM_4378				(0x17u)
#define CSR_VOLT_ADJ_PFM_4378				(0x17u)
#define CSR_VOLT_ADJ_LP_PFM_4378			(0x17u)
#define CSR_OUT_VOLT_TRIM_ADJ_4378			(0xEu)

#ifdef WL_INITVALS
#define ABUCK_VOLT_SW_DEFAULT_4387			(wliv_pmu_abuck_volt) /* 1.00V */
#define CBUCK_VOLT_SW_DEFAULT_4387			(wliv_pmu_cbuck_volt) /* 0.68V */
#define CBUCK_VOLT_NON_LVM				(wliv_pmu_cbuck_volt_non_lvm) /* 0.76V */
#else
#define ABUCK_VOLT_SW_DEFAULT_4387			(0x1Fu) /* 1.00V */
#define CBUCK_VOLT_SW_DEFAULT_4387			(0xFu)  /* 0.68V */
#define CBUCK_VOLT_NON_LVM				(0x13u) /* 0.76V */
#endif

#define CC_GCI1_REG					(0x1)

#define FORCE_CLK_ON                                                    1
#define FORCE_CLK_OFF                                                   0

#define PMU1_PLL0_SWITCH_MACCLOCK_120MHZ			(0)
#define PMU1_PLL0_SWITCH_MACCLOCK_160MHZ			(1)
#define PMU1_PLL0_PC1_M2DIV_VALUE_120MHZ			8
#define PMU1_PLL0_PC1_M2DIV_VALUE_160MHZ			6

/* 4369 Related */

/*
 * PMU VREG Definitions:
 *   http://confluence.broadcom.com/display/WLAN/BCM4369+PMU+Vreg+Control+Register
 */
/* PMU VREG4 */
#define PMU_28NM_VREG4_WL_LDO_CNTL_EN				(0x1 << 10)

/* PMU VREG6 */
#define PMU_28NM_VREG6_BTLDO3P3_PU				(0x1 << 12)
#define PMU_4387_VREG6_BTLDO3P3_PU				(0x1 << 8)

/* PMU resources */
#define RES4347_XTAL_PU			6
#define RES4347_CORE_RDY_DIG		17
#define RES4347_CORE_RDY_AUX		18
#define RES4347_CORE_RDY_MAIN		22

/* 4369 PMU Resources */
#define RES4369_DUMMY			0
#define RES4369_ABUCK			1
#define RES4369_PMU_SLEEP		2
#define RES4369_MISCLDO			3
#define RES4369_LDO3P3			4
#define RES4369_FAST_LPO_AVAIL		5
#define RES4369_XTAL_PU			6
#define RES4369_XTAL_STABLE		7
#define RES4369_PWRSW_DIG		8
#define RES4369_SR_DIG			9
#define RES4369_SLEEP_DIG		10
#define RES4369_PWRSW_AUX		11
#define RES4369_SR_AUX			12
#define RES4369_SLEEP_AUX		13
#define RES4369_PWRSW_MAIN		14
#define RES4369_SR_MAIN			15
#define RES4369_SLEEP_MAIN		16
#define RES4369_DIG_CORE_RDY		17
#define RES4369_CORE_RDY_AUX		18
#define RES4369_ALP_AVAIL		19
#define RES4369_RADIO_AUX_PU		20
#define RES4369_MINIPMU_AUX_PU		21
#define RES4369_CORE_RDY_MAIN		22
#define RES4369_RADIO_MAIN_PU		23
#define RES4369_MINIPMU_MAIN_PU		24
#define RES4369_PCIE_EP_PU		25
#define RES4369_COLD_START_WAIT		26
#define RES4369_ARMHTAVAIL		27
#define RES4369_HT_AVAIL		28
#define RES4369_MACPHY_AUX_CLK_AVAIL	29
#define RES4369_MACPHY_MAIN_CLK_AVAIL	30

/*
* 4378 PMU Resources
*/
#define RES4378_DUMMY			0
#define RES4378_ABUCK			1
#define RES4378_PMU_SLEEP		2
#define RES4378_MISC_LDO		3
#define RES4378_LDO3P3_PU		4
#define RES4378_FAST_LPO_AVAIL		5
#define RES4378_XTAL_PU		6
#define RES4378_XTAL_STABLE		7
#define RES4378_PWRSW_DIG		8
#define RES4378_SR_DIG			9
#define RES4378_SLEEP_DIG		10
#define RES4378_PWRSW_AUX		11
#define RES4378_SR_AUX			12
#define RES4378_SLEEP_AUX		13
#define RES4378_PWRSW_MAIN		14
#define RES4378_SR_MAIN		15
#define RES4378_SLEEP_MAIN		16
#define RES4378_CORE_RDY_DIG		17
#define RES4378_CORE_RDY_AUX		18
#define RES4378_ALP_AVAIL		19
#define RES4378_RADIO_AUX_PU		20
#define RES4378_MINIPMU_AUX_PU		21
#define RES4378_CORE_RDY_MAIN		22
#define RES4378_RADIO_MAIN_PU		23
#define RES4378_MINIPMU_MAIN_PU	24
#define RES4378_CORE_RDY_CB		25
#define RES4378_PWRSW_CB		26
#define RES4378_ARMHTAVAIL		27
#define RES4378_HT_AVAIL		28
#define RES4378_MACPHY_AUX_CLK_AVAIL	29
#define RES4378_MACPHY_MAIN_CLK_AVAIL	30
#define RES4378_RESERVED_31		31

/*
* 4387 PMU Resources
*/
#define RES4387_DUMMY			0
#define RES4387_RESERVED_1		1
#define RES4387_FAST_LPO_AVAIL		1	/* C0 */
#define RES4387_PMU_SLEEP		2
#define RES4387_PMU_LP			2	/* C0 */
#define RES4387_MISC_LDO		3
#define RES4387_RESERVED_4		4
#define RES4387_SERDES_AFE_RET		4	/* C0 */
#define RES4387_XTAL_HQ			5
#define RES4387_XTAL_PU			6
#define RES4387_XTAL_STABLE		7
#define RES4387_PWRSW_DIG		8
#define RES4387_CORE_RDY_BTMAIN		9
#define RES4387_CORE_RDY_BTSC		10
#define RES4387_PWRSW_AUX		11
#define RES4387_PWRSW_SCAN		12
#define RES4387_CORE_RDY_SCAN		13
#define RES4387_PWRSW_MAIN		14
#define RES4387_RESERVED_15		15
#define RES4387_XTAL_PM_CLK		15	/* C0 */
#define RES4387_RESERVED_16		16
#define RES4387_CORE_RDY_DIG		17
#define RES4387_CORE_RDY_AUX		18
#define RES4387_ALP_AVAIL		19
#define RES4387_RADIO_PU_AUX		20
#define RES4387_RADIO_PU_SCAN		21
#define RES4387_CORE_RDY_MAIN		22
#define RES4387_RADIO_PU_MAIN		23
#define RES4387_MACPHY_CLK_SCAN		24
#define RES4387_CORE_RDY_CB		25
#define RES4387_PWRSW_CB		26
#define RES4387_ARMCLK_AVAIL		27
#define RES4387_HT_AVAIL		28
#define RES4387_MACPHY_CLK_AUX		29
#define RES4387_MACPHY_CLK_MAIN		30
#define RES4387_RESERVED_31		31

/* 4388 PMU Resources */
#define RES4388_DUMMY			0u
#define RES4388_FAST_LPO_AVAIL		1u
#define RES4388_PMU_LP			2u
#define RES4388_MISC_LDO		3u
#define RES4388_SERDES_AFE_RET		4u
#define RES4388_XTAL_HQ			5u
#define RES4388_XTAL_PU			6u
#define RES4388_XTAL_STABLE		7u
#define RES4388_PWRSW_DIG		8u
#define RES4388_BTMC_TOP_RDY		9u
#define RES4388_BTSC_TOP_RDY		10u
#define RES4388_PWRSW_AUX		11u
#define RES4388_PWRSW_SCAN		12u
#define RES4388_CORE_RDY_SCAN		13u
#define RES4388_PWRSW_MAIN		14u
#define RES4388_RESERVED_15		15u
#define RES4388_RESERVED_16		16u
#define RES4388_CORE_RDY_DIG		17u
#define RES4388_CORE_RDY_AUX		18u
#define RES4388_ALP_AVAIL		19u
#define RES4388_RADIO_PU_AUX		20u
#define RES4388_RADIO_PU_SCAN		21u
#define RES4388_CORE_RDY_MAIN		22u
#define RES4388_RADIO_PU_MAIN		23u
#define RES4388_MACPHY_CLK_SCAN		24u
#define RES4388_CORE_RDY_CB		25u
#define RES4388_PWRSW_CB		26u
#define RES4388_ARMCLKAVAIL		27u
#define RES4388_HT_AVAIL		28u
#define RES4388_MACPHY_CLK_AUX		29u
#define RES4388_MACPHY_CLK_MAIN		30u
#define RES4388_RESERVED_31		31u

/* 4389 PMU Resources */
#define RES4389_DUMMY			0u
#define RES4389_FAST_LPO_AVAIL		1u
#define RES4389_PMU_LP			2u
#define RES4389_MISC_LDO		3u
#define RES4389_SERDES_AFE_RET		4u
#define RES4389_XTAL_HQ			5u
#define RES4389_XTAL_PU			6u
#define RES4389_XTAL_STABLE		7u
#define RES4389_PWRSW_DIG		8u
#define RES4389_BTMC_TOP_RDY		9u
#define RES4389_BTSC_TOP_RDY		10u
#define RES4389_PWRSW_AUX		11u
#define RES4389_PWRSW_SCAN		12u
#define RES4389_CORE_RDY_SCAN		13u
#define RES4389_PWRSW_MAIN		14u
#define RES4389_RESERVED_15		15u
#define RES4389_RESERVED_16		16u
#define RES4389_CORE_RDY_DIG		17u
#define RES4389_CORE_RDY_AUX		18u
#define RES4389_ALP_AVAIL		19u
#define RES4389_RADIO_PU_AUX		20u
#define RES4389_RADIO_PU_SCAN		21u
#define RES4389_CORE_RDY_MAIN		22u
#define RES4389_RADIO_PU_MAIN		23u
#define RES4389_MACPHY_CLK_SCAN		24u
#define RES4389_CORE_RDY_CB		25u
#define RES4389_PWRSW_CB		26u
#define RES4389_ARMCLKAVAIL		27u
#define RES4389_HT_AVAIL		28u
#define RES4389_MACPHY_CLK_AUX		29u
#define RES4389_MACPHY_CLK_MAIN		30u
#define RES4389_RESERVED_31		31u

/* 4397 PMU Resources */
#define RES4397_DUMMY			0u
#define RES4397_FAST_LPO_AVAIL		1u
#define RES4397_PMU_LP			2u
#define RES4397_MISC_LDO		3u
#define RES4397_SERDES_AFE_RET		4u
#define RES4397_XTAL_HQ			5u
#define RES4397_XTAL_PU			6u
#define RES4397_XTAL_STABLE		7u
#define RES4397_PWRSW_DIG		8u
#define RES4397_BTMC_TOP_RDY		9u
#define RES4397_BTSC_TOP_RDY		10u
#define RES4397_PWRSW_AUX		11u
#define RES4397_PWRSW_SCAN		12u
#define RES4397_CORE_RDY_SCAN		13u
#define RES4397_PWRSW_MAIN		14u
#define RES4397_XTAL_PM_CLK		15u
#define RES4397_PWRSW_DRR2		16u
#define RES4397_CORE_RDY_DIG		17u
#define RES4397_CORE_RDY_AUX		18u
#define RES4397_ALP_AVAIL		19u
#define RES4397_RADIO_PU_AUX		20u
#define RES4397_RADIO_PU_SCAN		21u
#define RES4397_CORE_RDY_MAIN		22u
#define RES4397_RADIO_PU_MAIN		23u
#define RES4397_MACPHY_CLK_SCAN		24u
#define RES4397_CORE_RDY_CB		25u
#define RES4397_PWRSW_CB		26u
#define RES4397_ARMCLKAVAIL		27u
#define RES4397_HT_AVAIL		28u
#define RES4397_MACPHY_CLK_AUX		29u
#define RES4397_MACPHY_CLK_MAIN		30u
#define RES4397_RESERVED_31		31u

/* 0: BToverPCIe, 1: BToverUART */
#define CST4378_CHIPMODE_BTOU(cs)	(((cs) & (1 << 6)) != 0)
#define CST4378_CHIPMODE_BTOP(cs)	(((cs) & (1 << 6)) == 0)
#define CST4378_SPROM_PRESENT		0x00000010

#define CST4387_SFLASH_PRESENT		0x00000010U

#define CST4387_CHIPMODE_BTOU(cs)	(((cs) & (1 << 6)) != 0)
#define CST4387_CHIPMODE_BTOP(cs)	(((cs) & (1 << 6)) == 0)
#define CST4387_SPROM_PRESENT		0x00000010

/* GCI chip status */
#define GCI_CS_4369_FLL1MHZ_LOCK_MASK	(1 << 1)
#define GCI_CS_4387_FLL1MHZ_LOCK_MASK	(1 << 1)

#define GCI_CS_4387_FLL1MHZ_DAC_OUT_SHIFT	(16u)
#define GCI_CS_4387_FLL1MHZ_DAC_OUT_MASK	(0x00ff0000u)
#define GCI_CS_4389_FLL1MHZ_DAC_OUT_SHIFT	(16u)
#define GCI_CS_4389_FLL1MHZ_DAC_OUT_MASK	(0x00ff0000u)

/* GCI chip control registers */
#define GCI_CC7_AAON_BYPASS_PWRSW_SEL          13
#define GCI_CC7_AAON_BYPASS_PWRSW_SEQ_ON       14

/* 4368 GCI chip control registers */
#define GCI_CC7_PRISEL_MASK			(1 << 8 | 1 << 9)
#define GCI_CC12_PRISEL_MASK			(1 << 0 | 1 << 1)
#define GCI_CC12_PRISEL_SHIFT			0
#define GCI_CC12_DMASK_MASK			(0x3ff << 10)
#define GCI_CC16_ANT_SHARE_MASK		(1 << 16 | 1 << 17)

#define CC2_4362_SDIO_AOS_WAKEUP_MASK			(1u << 24u)
#define CC2_4362_SDIO_AOS_WAKEUP_SHIFT			24u

#define CC2_4378_MAIN_MEMLPLDO_VDDB_OFF_MASK		(1u << 12u)
#define CC2_4378_MAIN_MEMLPLDO_VDDB_OFF_SHIFT		12u
#define CC2_4378_AUX_MEMLPLDO_VDDB_OFF_MASK		(1u << 13u)
#define CC2_4378_AUX_MEMLPLDO_VDDB_OFF_SHIFT		13u
#define CC2_4378_MAIN_VDDRET_ON_MASK			(1u << 15u)
#define CC2_4378_MAIN_VDDRET_ON_SHIFT			15u
#define CC2_4378_AUX_VDDRET_ON_MASK			(1u << 16u)
#define CC2_4378_AUX_VDDRET_ON_SHIFT			16u
#define CC2_4378_GCI2WAKE_MASK				(1u << 31u)
#define CC2_4378_GCI2WAKE_SHIFT				31u
#define CC2_4378_SDIO_AOS_WAKEUP_MASK			(1u << 24u)
#define CC2_4378_SDIO_AOS_WAKEUP_SHIFT			24u
#define CC4_4378_LHL_TIMER_SELECT			(1u << 0u)
#define CC6_4378_PWROK_WDT_EN_IN_MASK			(1u << 6u)
#define CC6_4378_PWROK_WDT_EN_IN_SHIFT			6u
#define CC6_4378_SDIO_AOS_CHIP_WAKEUP_MASK		(1u << 24u)
#define CC6_4378_SDIO_AOS_CHIP_WAKEUP_SHIFT		24u

#define CC2_4378_USE_WLAN_BP_CLK_ON_REQ_MASK		(1u << 15u)
#define CC2_4378_USE_WLAN_BP_CLK_ON_REQ_SHIFT		15u
#define CC2_4378_USE_CMN_BP_CLK_ON_REQ_MASK		(1u << 16u)
#define CC2_4378_USE_CMN_BP_CLK_ON_REQ_SHIFT		16u

#define CC2_4387_MAIN_MEMLPLDO_VDDB_OFF_MASK		(1u << 12u)
#define CC2_4387_MAIN_MEMLPLDO_VDDB_OFF_SHIFT		12u
#define CC2_4387_AUX_MEMLPLDO_VDDB_OFF_MASK		(1u << 13u)
#define CC2_4387_AUX_MEMLPLDO_VDDB_OFF_SHIFT		13u
#define CC2_4387_MAIN_VDDRET_ON_MASK			(1u << 15u)
#define CC2_4387_MAIN_VDDRET_ON_SHIFT			15u
#define CC2_4387_AUX_VDDRET_ON_MASK			(1u << 16u)
#define CC2_4387_AUX_VDDRET_ON_SHIFT			16u
#define CC2_4387_GCI2WAKE_MASK				(1u << 31u)
#define CC2_4387_GCI2WAKE_SHIFT				31u
#define CC2_4387_SDIO_AOS_WAKEUP_MASK			(1u << 24u)
#define CC2_4387_SDIO_AOS_WAKEUP_SHIFT			24u
#define CC4_4387_LHL_TIMER_SELECT			(1u << 0u)
#define CC6_4387_PWROK_WDT_EN_IN_MASK			(1u << 6u)
#define CC6_4387_PWROK_WDT_EN_IN_SHIFT			6u
#define CC6_4387_SDIO_AOS_CHIP_WAKEUP_MASK		(1u << 24u)
#define CC6_4387_SDIO_AOS_CHIP_WAKEUP_SHIFT		24u

#define CC2_4387_USE_WLAN_BP_CLK_ON_REQ_MASK		(1u << 15u)
#define CC2_4387_USE_WLAN_BP_CLK_ON_REQ_SHIFT		15u
#define CC2_4387_USE_CMN_BP_CLK_ON_REQ_MASK		(1u << 16u)
#define CC2_4387_USE_CMN_BP_CLK_ON_REQ_SHIFT		16u

#define CC2_4388_MAIN_MEMLPLDO_VDDB_OFF_MASK		(1u << 12u)
#define CC2_4388_MAIN_MEMLPLDO_VDDB_OFF_SHIFT		(12u)
#define CC2_4388_AUX_MEMLPLDO_VDDB_OFF_MASK		(1u << 13u)
#define CC2_4388_AUX_MEMLPLDO_VDDB_OFF_SHIFT		(13u)
#define CC2_4388_MAIN_VDDRET_ON_MASK			(1u << 15u)
#define CC2_4388_MAIN_VDDRET_ON_SHIFT			(15u)
#define CC2_4388_AUX_VDDRET_ON_MASK			(1u << 16u)
#define CC2_4388_AUX_VDDRET_ON_SHIFT			(16u)
#define CC2_4388_GCI2WAKE_MASK				(1u << 31u)
#define CC2_4388_GCI2WAKE_SHIFT				(31u)
#define CC2_4388_SDIO_AOS_WAKEUP_MASK			(1u << 24u)
#define CC2_4388_SDIO_AOS_WAKEUP_SHIFT			(24u)
#define CC4_4388_LHL_TIMER_SELECT			(1u << 0u)
#define CC6_4388_PWROK_WDT_EN_IN_MASK			(1u << 6u)
#define CC6_4388_PWROK_WDT_EN_IN_SHIFT			(6u)
#define CC6_4388_SDIO_AOS_CHIP_WAKEUP_MASK		(1u << 24u)
#define CC6_4388_SDIO_AOS_CHIP_WAKEUP_SHIFT		(24u)

#define CC2_4388_USE_WLAN_BP_CLK_ON_REQ_MASK		(1u << 15u)
#define CC2_4388_USE_WLAN_BP_CLK_ON_REQ_SHIFT		(15u)
#define CC2_4388_USE_CMN_BP_CLK_ON_REQ_MASK		(1u << 16u)
#define CC2_4388_USE_CMN_BP_CLK_ON_REQ_SHIFT		(16u)

#define CC2_4389_MAIN_MEMLPLDO_VDDB_OFF_MASK		(1u << 12u)
#define CC2_4389_MAIN_MEMLPLDO_VDDB_OFF_SHIFT		(12u)
#define CC2_4389_AUX_MEMLPLDO_VDDB_OFF_MASK		(1u << 13u)
#define CC2_4389_AUX_MEMLPLDO_VDDB_OFF_SHIFT		(13u)
#define CC2_4389_MAIN_VDDRET_ON_MASK			(1u << 15u)
#define CC2_4389_MAIN_VDDRET_ON_SHIFT			(15u)
#define CC2_4389_AUX_VDDRET_ON_MASK			(1u << 16u)
#define CC2_4389_AUX_VDDRET_ON_SHIFT			(16u)
#define CC2_4389_GCI2WAKE_MASK				(1u << 31u)
#define CC2_4389_GCI2WAKE_SHIFT				(31u)
#define CC2_4389_SDIO_AOS_WAKEUP_MASK			(1u << 24u)
#define CC2_4389_SDIO_AOS_WAKEUP_SHIFT			(24u)
#define CC4_4389_LHL_TIMER_SELECT			(1u << 0u)
#define CC6_4389_PWROK_WDT_EN_IN_MASK			(1u << 6u)
#define CC6_4389_PWROK_WDT_EN_IN_SHIFT			(6u)
#define CC6_4389_SDIO_AOS_CHIP_WAKEUP_MASK		(1u << 24u)
#define CC6_4389_SDIO_AOS_CHIP_WAKEUP_SHIFT		(24u)

#define CC2_4389_USE_WLAN_BP_CLK_ON_REQ_MASK		(1u << 15u)
#define CC2_4389_USE_WLAN_BP_CLK_ON_REQ_SHIFT		(15u)
#define CC2_4389_USE_CMN_BP_CLK_ON_REQ_MASK		(1u << 16u)
#define CC2_4389_USE_CMN_BP_CLK_ON_REQ_SHIFT		(16u)

#define PCIE_GPIO1_GPIO_PIN    CC_GCI_GPIO_0
#define PCIE_PERST_GPIO_PIN	CC_GCI_GPIO_1
#define PCIE_CLKREQ_GPIO_PIN	CC_GCI_GPIO_2

#define VREG5_4378_MEMLPLDO_ADJ_MASK				0xF0000000
#define VREG5_4378_MEMLPLDO_ADJ_SHIFT				28
#define VREG5_4378_LPLDO_ADJ_MASK				0x00F00000
#define VREG5_4378_LPLDO_ADJ_SHIFT				20

#define VREG5_4387_MISCLDO_PU_MASK				(0x00000800u)
#define VREG5_4387_MISCLDO_PU_SHIFT				(11u)

#define VREG5_4387_MEMLPLDO_ADJ_MASK				0xF0000000
#define VREG5_4387_MEMLPLDO_ADJ_SHIFT				28
#define VREG5_4387_LPLDO_ADJ_MASK				0x00F00000
#define VREG5_4387_LPLDO_ADJ_SHIFT				20
#define VREG5_4387_MISC_LDO_ADJ_MASK				(0xfu)
#define VREG5_4387_MISC_LDO_ADJ_SHIFT				(0)

/* misc ldo voltage
 * https://drive.google.com/file/d/1JjvNhp-RIXJBtw99M4w5ww4MmDsBJbpD
 */
#define	PMU_VREG5_MISC_LDO_VOLT_0p931	(0x7u)		/* 0.93125 v */
#define	PMU_VREG5_MISC_LDO_VOLT_0p912	(0x6u)		/* 0.91250 v */
#define	PMU_VREG5_MISC_LDO_VOLT_0p893	(0x5u)		/* 0.89375 v */
#define	PMU_VREG5_MISC_LDO_VOLT_0p875	(0x4u)		/* 0.87500 v */
#define	PMU_VREG5_MISC_LDO_VOLT_0p856	(0x3u)		/* 0.85625 v */
#define	PMU_VREG5_MISC_LDO_VOLT_0p837	(0x2u)		/* 0.83750 v */
#define	PMU_VREG5_MISC_LDO_VOLT_0p818	(0x1u)		/* 0.81875 v */
#define	PMU_VREG5_MISC_LDO_VOLT_0p800	(0)		/* 0.80000 v */
#define	PMU_VREG5_MISC_LDO_VOLT_0p781	(0xfu)		/* 0.78125 v */
#define	PMU_VREG5_MISC_LDO_VOLT_0p762	(0xeu)		/* 0.76250 v */
#define	PMU_VREG5_MISC_LDO_VOLT_0p743	(0xdu)		/* 0.74375 v */
#define	PMU_VREG5_MISC_LDO_VOLT_0p725	(0xcu)		/* 0.72500 v */
#define	PMU_VREG5_MISC_LDO_VOLT_0p706	(0xbu)		/* 0.70625 v */
#define	PMU_VREG5_MISC_LDO_VOLT_0p687	(0xau)		/* 0.68750 v */
#define	PMU_VREG5_MISC_LDO_VOLT_0p668	(0x9u)		/* 0.66875 v */
#define	PMU_VREG5_MISC_LDO_VOLT_0p650	(0x8u)		/* 0.65000 v */

/* lpldo/memlpldo voltage */
#define	PMU_VREG5_LPLDO_VOLT_0_88	0xf	/* 0.88v */
#define	PMU_VREG5_LPLDO_VOLT_0_86	0xe	/* 0.86v */
#define	PMU_VREG5_LPLDO_VOLT_0_84	0xd	/* 0.84v */
#define	PMU_VREG5_LPLDO_VOLT_0_82	0xc	/* 0.82v */
#define	PMU_VREG5_LPLDO_VOLT_0_80	0xb	/* 0.80v */
#define	PMU_VREG5_LPLDO_VOLT_0_78	0xa	/* 0.78v */
#define	PMU_VREG5_LPLDO_VOLT_0_76	0x9	/* 0.76v */
#define	PMU_VREG5_LPLDO_VOLT_0_74	0x8	/* 0.74v */
#define	PMU_VREG5_LPLDO_VOLT_0_72	0x7	/* 0.72v */
#define	PMU_VREG5_LPLDO_VOLT_1_10	0x6	/* 1.10v */
#define	PMU_VREG5_LPLDO_VOLT_1_00	0x5	/* 1.00v */
#define	PMU_VREG5_LPLDO_VOLT_0_98	0x4	/* 0.98v */
#define	PMU_VREG5_LPLDO_VOLT_0_96	0x3	/* 0.96v */
#define	PMU_VREG5_LPLDO_VOLT_0_94	0x2	/* 0.94v */
#define	PMU_VREG5_LPLDO_VOLT_0_92	0x1	/* 0.92v */
#define	PMU_VREG5_LPLDO_VOLT_0_90	0x0	/* 0.90v */

/* Save/Restore engine */

/* 512 bytes block */
#define SR_ASM_ADDR_BLK_SIZE_SHIFT	(9u)

#define BM_ADDR_TO_SR_ADDR(bmaddr)	((bmaddr) >> SR_ASM_ADDR_BLK_SIZE_SHIFT)
#define SR_ADDR_TO_BM_ADDR(sraddr)	((sraddr) << SR_ASM_ADDR_BLK_SIZE_SHIFT)

/* Txfifo is 512KB for main core and 128KB for aux core
 * We use first 12kB (0x3000) in BMC buffer for template in main core and
 * 6.5kB (0x1A00) in aux core, followed by ASM code
 */
#define SR_ASM_ADDR_MAIN_4369		BM_ADDR_TO_SR_ADDR(0xC00)
#define SR_ASM_ADDR_AUX_4369		BM_ADDR_TO_SR_ADDR(0xC00)
#define SR_ASM_ADDR_DIG_4369		(0x0)

#define SR_ASM_ADDR_MAIN_4362		BM_ADDR_TO_SR_ADDR(0xc00u)
#define SR_ASM_ADDR_DIG_4362		(0x0u)

#define SR_ASM_ADDR_MAIN_4378		(0x18)
#define SR_ASM_ADDR_AUX_4378		(0xd)
/* backplane address, use last 16k of BTCM for s/r */
#define SR_ASM_ADDR_DIG_4378A0		(0x51c000)

/* backplane address, use last 32k of BTCM for s/r */
#define SR_ASM_ADDR_DIG_4378B0		(0x518000)

#define SR_ASM_ADDR_MAIN_4387		(0x18)
#define SR_ASM_ADDR_AUX_4387		(0xd)
#define SR_ASM_ADDR_SCAN_4387		(0)
/* backplane address */
#define SR_ASM_ADDR_DIG_4387		(0x800000)

#define SR_ASM_ADDR_MAIN_4387C0		BM_ADDR_TO_SR_ADDR(0xC00)
#define SR_ASM_ADDR_AUX_4387C0		BM_ADDR_TO_SR_ADDR(0xC00)
#define SR_ASM_ADDR_DIG_4387C0		(0x931000)
#define SR_ASM_ADDR_DIG_4387_C0		(0x931000)

#define SR_ASM_ADDR_MAIN_4388		BM_ADDR_TO_SR_ADDR(0xC00)
#define SR_ASM_ADDR_AUX_4388		BM_ADDR_TO_SR_ADDR(0xC00)
#define SR_ASM_ADDR_SCAN_4388		BM_ADDR_TO_SR_ADDR(0)
#define SR_ASM_ADDR_DIG_4388		(0x18520000)
#define SR_ASM_SIZE_DIG_4388		(65536u)
#define FIS_CMN_SUBCORE_ADDR_4388	(0x1640u)

#define SR_ASM_ADDR_MAIN_4389C0		BM_ADDR_TO_SR_ADDR(0xC00)
#define SR_ASM_ADDR_AUX_4389C0		BM_ADDR_TO_SR_ADDR(0xC00)
#define SR_ASM_ADDR_SCAN_4389C0		BM_ADDR_TO_SR_ADDR(0x000)
#define SR_ASM_ADDR_DIG_4389C0		(0x18520000)
#define SR_ASM_SIZE_DIG_4389C0		(8192u * 8u)

#define SR_ASM_ADDR_MAIN_4389		BM_ADDR_TO_SR_ADDR(0xC00)
#define SR_ASM_ADDR_AUX_4389		BM_ADDR_TO_SR_ADDR(0xC00)
#define SR_ASM_ADDR_SCAN_4389		BM_ADDR_TO_SR_ADDR(0x000)
#define SR_ASM_ADDR_DIG_4389		(0x18520000)
#define SR_ASM_SIZE_DIG_4389		(8192u * 8u)
#define FIS_CMN_SUBCORE_ADDR_4389	(0x1640u)

#define SR_ASM_ADDR_DIG_4397		(0x18520000)

/* SR Control0 bits */
#define SR0_SR_ENG_EN_MASK		0x1
#define SR0_SR_ENG_EN_SHIFT		0
#define SR0_SR_ENG_CLK_EN		(1 << 1)
#define SR0_RSRC_TRIGGER		(0xC << 2)
#define SR0_WD_MEM_MIN_DIV		(0x3 << 6)
#define SR0_INVERT_SR_CLK		(1 << 11)
#define SR0_MEM_STBY_ALLOW		(1 << 16)
#define SR0_ENABLE_SR_ILP		(1 << 17)
#define SR0_ENABLE_SR_ALP		(1 << 18)
#define SR0_ENABLE_SR_HT		(1 << 19)
#define SR0_ALLOW_PIC			(3 << 20)
#define SR0_ENB_PMU_MEM_DISABLE		(1 << 30)

/* SR Control0 bits for 4369 */
#define SR0_4369_SR_ENG_EN_MASK		0x1
#define SR0_4369_SR_ENG_EN_SHIFT	0
#define SR0_4369_SR_ENG_CLK_EN		(1 << 1)
#define SR0_4369_RSRC_TRIGGER		(0xC << 2)
#define SR0_4369_WD_MEM_MIN_DIV		(0x2 << 6)
#define SR0_4369_INVERT_SR_CLK		(1 << 11)
#define SR0_4369_MEM_STBY_ALLOW		(1 << 16)
#define SR0_4369_ENABLE_SR_ILP		(1 << 17)
#define SR0_4369_ENABLE_SR_ALP		(1 << 18)
#define SR0_4369_ENABLE_SR_HT		(1 << 19)
#define SR0_4369_ALLOW_PIC		(3 << 20)
#define SR0_4369_ENB_PMU_MEM_DISABLE	(1 << 30)

/* SR Control0 bits for 4378 */
#define SR0_4378_SR_ENG_EN_MASK	0x1
#define SR0_4378_SR_ENG_EN_SHIFT	0
#define SR0_4378_SR_ENG_CLK_EN		(1 << 1)
#define SR0_4378_RSRC_TRIGGER		(0xC << 2)
#define SR0_4378_WD_MEM_MIN_DIV	(0x2 << 6)
#define SR0_4378_INVERT_SR_CLK		(1 << 11)
#define SR0_4378_MEM_STBY_ALLOW	(1 << 16)
#define SR0_4378_ENABLE_SR_ILP		(1 << 17)
#define SR0_4378_ENABLE_SR_ALP		(1 << 18)
#define SR0_4378_ENABLE_SR_HT		(1 << 19)
#define SR0_4378_ALLOW_PIC		(3 << 20)
#define SR0_4378_ENB_PMU_MEM_DISABLE	(1 << 30)

/* SR Control0 bits for 4387 */
#define SR0_4387_SR_ENG_EN_MASK		0x1
#define SR0_4387_SR_ENG_EN_SHIFT	0
#define SR0_4387_SR_ENG_CLK_EN		(1 << 1)
#define SR0_4387_RSRC_TRIGGER		(0xC << 2)
#define SR0_4387_WD_MEM_MIN_DIV		(0x2 << 6)
#define SR0_4387_WD_MEM_MIN_DIV_AUX	(0x4 << 6)
#define SR0_4387_INVERT_SR_CLK		(1 << 11)
#define SR0_4387_MEM_STBY_ALLOW		(1 << 16)
#define SR0_4387_ENABLE_SR_ILP		(1 << 17)
#define SR0_4387_ENABLE_SR_ALP		(1 << 18)
#define SR0_4387_ENABLE_SR_HT		(1 << 19)
#define SR0_4387_ALLOW_PIC		(3 << 20)
#define SR0_4387_ENB_PMU_MEM_DISABLE	(1 << 30)

/* SR Control0 bits for 4388 */
#define SR0_4388_SR_ENG_EN_MASK		0x1u
#define SR0_4388_SR_ENG_EN_SHIFT	0
#define SR0_4388_SR_ENG_CLK_EN		(1u << 1u)
#define SR0_4388_RSRC_TRIGGER		(0xCu << 2u)
#define SR0_4388_WD_MEM_MIN_DIV		(0x2u << 6u)
#define SR0_4388_INVERT_SR_CLK		(1u << 11u)
#define SR0_4388_MEM_STBY_ALLOW		(1u << 16u)
#define SR0_4388_ENABLE_SR_ILP		(1u << 17u)
#define SR0_4388_ENABLE_SR_ALP		(1u << 18u)
#define SR0_4388_ENABLE_SR_HT		(1u << 19u)
#define SR0_4388_ALLOW_PIC		(3u << 20u)
#define SR0_4388_ENB_PMU_MEM_DISABLE	(1u << 30u)

/* SR Control0 bits for 4389 */
#define SR0_4389_SR_ENG_EN_MASK		0x1
#define SR0_4389_SR_ENG_EN_SHIFT	0
#define SR0_4389_SR_ENG_CLK_EN		(1 << 1)
#define SR0_4389_RSRC_TRIGGER		(0xC << 2)
#define SR0_4389_WD_MEM_MIN_DIV		(0x2 << 6)
#define SR0_4389_INVERT_SR_CLK		(1 << 11)
#define SR0_4389_MEM_STBY_ALLOW		(1 << 16)
#define SR0_4389_ENABLE_SR_ILP		(1 << 17)
#define SR0_4389_ENABLE_SR_ALP		(1 << 18)
#define SR0_4389_ENABLE_SR_HT		(1 << 19)
#define SR0_4389_ALLOW_PIC		(3 << 20)
#define SR0_4389_ENB_PMU_MEM_DISABLE	(1 << 30)

/* SR Control1 bits */
#define SR1_INIT_ADDR_MASK			(0x000003FFu)
#define SR1_SELFTEST_ENB_MASK			(0x00004000u)
#define SR1_SELFTEST_ERR_INJCT_ENB_MASK		(0x00008000u)
#define SR1_SELFTEST_ERR_INJCT_PRD_MASK		(0xFFFF0000u)
#define SR1_SELFTEST_ERR_INJCT_PRD_SHIFT	(16u)

/* SR Control2 bits */
#define SR2_INIT_ADDR_LONG_MASK			(0x00003FFFu)

#define SR_SELFTEST_ERR_INJCT_PRD		(0x10u)

/* SR Status1 bits */
#define SR_STS1_SR_ERR_MASK			(0x00000001u)

/* =========== LHL regs =========== */
/* 4369 LHL register settings */
#define LHL4369_UP_CNT			0
#define LHL4369_DN_CNT			2
#define LHL4369_PWRSW_EN_DWN_CNT	(LHL4369_DN_CNT + 2)
#define LHL4369_ISO_EN_DWN_CNT		(LHL4369_PWRSW_EN_DWN_CNT + 3)
#define LHL4369_SLB_EN_DWN_CNT		(LHL4369_ISO_EN_DWN_CNT + 1)
#define LHL4369_ASR_CLK4M_DIS_DWN_CNT	(LHL4369_DN_CNT)
#define LHL4369_ASR_LPPFM_MODE_DWN_CNT	(LHL4369_DN_CNT)
#define LHL4369_ASR_MODE_SEL_DWN_CNT	(LHL4369_DN_CNT)
#define LHL4369_ASR_MANUAL_MODE_DWN_CNT	(LHL4369_DN_CNT)
#define LHL4369_ASR_ADJ_DWN_CNT		(LHL4369_DN_CNT)
#define LHL4369_ASR_OVERI_DIS_DWN_CNT	(LHL4369_DN_CNT)
#define LHL4369_ASR_TRIM_ADJ_DWN_CNT	(LHL4369_DN_CNT)
#define LHL4369_VDDC_SW_DIS_DWN_CNT	(LHL4369_SLB_EN_DWN_CNT + 1)
#define LHL4369_VMUX_ASR_SEL_DWN_CNT	(LHL4369_VDDC_SW_DIS_DWN_CNT + 1)
#define LHL4369_CSR_ADJ_DWN_CNT		(LHL4369_VMUX_ASR_SEL_DWN_CNT + 1)
#define LHL4369_CSR_MODE_DWN_CNT	(LHL4369_VMUX_ASR_SEL_DWN_CNT + 1)
#define LHL4369_CSR_OVERI_DIS_DWN_CNT	(LHL4369_VMUX_ASR_SEL_DWN_CNT + 1)
#define LHL4369_HPBG_CHOP_DIS_DWN_CNT	(LHL4369_VMUX_ASR_SEL_DWN_CNT + 1)
#define LHL4369_SRBG_REF_SEL_DWN_CNT	(LHL4369_VMUX_ASR_SEL_DWN_CNT + 1)
#define LHL4369_PFM_PWR_SLICE_DWN_CNT	(LHL4369_VMUX_ASR_SEL_DWN_CNT + 1)
#define LHL4369_CSR_TRIM_ADJ_DWN_CNT	(LHL4369_VMUX_ASR_SEL_DWN_CNT + 1)
#define LHL4369_CSR_VOLTAGE_DWN_CNT	(LHL4369_VMUX_ASR_SEL_DWN_CNT + 1)
#define LHL4369_HPBG_PU_EN_DWN_CNT	(LHL4369_CSR_MODE_DWN_CNT + 1)

#define LHL4369_HPBG_PU_EN_UP_CNT	(LHL4369_UP_CNT + 1)
#define LHL4369_CSR_ADJ_UP_CNT		(LHL4369_HPBG_PU_EN_UP_CNT + 1)
#define LHL4369_CSR_MODE_UP_CNT		(LHL4369_HPBG_PU_EN_UP_CNT + 1)
#define LHL4369_CSR_OVERI_DIS_UP_CNT	(LHL4369_HPBG_PU_EN_UP_CNT + 1)
#define LHL4369_HPBG_CHOP_DIS_UP_CNT	(LHL4369_HPBG_PU_EN_UP_CNT + 1)
#define LHL4369_SRBG_REF_SEL_UP_CNT	(LHL4369_HPBG_PU_EN_UP_CNT + 1)
#define LHL4369_PFM_PWR_SLICE_UP_CNT	(LHL4369_HPBG_PU_EN_UP_CNT + 1)
#define LHL4369_CSR_TRIM_ADJ_UP_CNT	(LHL4369_HPBG_PU_EN_UP_CNT + 1)
#define LHL4369_CSR_VOLTAGE_UP_CNT	(LHL4369_HPBG_PU_EN_UP_CNT + 1)
#define LHL4369_VMUX_ASR_SEL_UP_CNT	(LHL4369_CSR_MODE_UP_CNT + 1)
#define LHL4369_VDDC_SW_DIS_UP_CNT	(LHL4369_VMUX_ASR_SEL_UP_CNT + 1)
#define LHL4369_SLB_EN_UP_CNT		(LHL4369_VDDC_SW_DIS_UP_CNT + 8)
#define LHL4369_ISO_EN_UP_CNT		(LHL4369_SLB_EN_UP_CNT + 1)
#define LHL4369_PWRSW_EN_UP_CNT		(LHL4369_ISO_EN_UP_CNT + 3)
#define LHL4369_ASR_ADJ_UP_CNT		(LHL4369_PWRSW_EN_UP_CNT + 1)
#define LHL4369_ASR_CLK4M_DIS_UP_CNT	(LHL4369_PWRSW_EN_UP_CNT + 1)
#define LHL4369_ASR_LPPFM_MODE_UP_CNT	(LHL4369_PWRSW_EN_UP_CNT + 1)
#define LHL4369_ASR_MODE_SEL_UP_CNT	(LHL4369_PWRSW_EN_UP_CNT + 1)
#define LHL4369_ASR_MANUAL_MODE_UP_CNT	(LHL4369_PWRSW_EN_UP_CNT + 1)
#define LHL4369_ASR_OVERI_DIS_UP_CNT	(LHL4369_PWRSW_EN_UP_CNT + 1)
#define LHL4369_ASR_TRIM_ADJ_UP_CNT	(LHL4369_PWRSW_EN_UP_CNT + 1)

/* 4362 LHL register settings */
#define LHL4362_UP_CNT			(0u)
#define LHL4362_DN_CNT			(2u)
#define LHL4362_PWRSW_EN_DWN_CNT	(LHL4362_DN_CNT + 2)
#define LHL4362_ISO_EN_DWN_CNT		(LHL4362_PWRSW_EN_DWN_CNT + 3)
#define LHL4362_SLB_EN_DWN_CNT		(LHL4362_ISO_EN_DWN_CNT + 1)
#define LHL4362_ASR_CLK4M_DIS_DWN_CNT	(LHL4362_DN_CNT)
#define LHL4362_ASR_LPPFM_MODE_DWN_CNT	(LHL4362_DN_CNT)
#define LHL4362_ASR_MODE_SEL_DWN_CNT	(LHL4362_DN_CNT)
#define LHL4362_ASR_MANUAL_MODE_DWN_CNT	(LHL4362_DN_CNT)
#define LHL4362_ASR_ADJ_DWN_CNT		(LHL4362_DN_CNT)
#define LHL4362_ASR_OVERI_DIS_DWN_CNT	(LHL4362_DN_CNT)
#define LHL4362_ASR_TRIM_ADJ_DWN_CNT	(LHL4362_DN_CNT)
#define LHL4362_VDDC_SW_DIS_DWN_CNT	(LHL4362_SLB_EN_DWN_CNT + 1)
#define LHL4362_VMUX_ASR_SEL_DWN_CNT	(LHL4362_VDDC_SW_DIS_DWN_CNT + 1)
#define LHL4362_CSR_ADJ_DWN_CNT		(LHL4362_VMUX_ASR_SEL_DWN_CNT + 1)
#define LHL4362_CSR_MODE_DWN_CNT	(LHL4362_VMUX_ASR_SEL_DWN_CNT + 1)
#define LHL4362_CSR_OVERI_DIS_DWN_CNT	(LHL4362_VMUX_ASR_SEL_DWN_CNT + 1)
#define LHL4362_HPBG_CHOP_DIS_DWN_CNT	(LHL4362_VMUX_ASR_SEL_DWN_CNT + 1)
#define LHL4362_SRBG_REF_SEL_DWN_CNT	(LHL4362_VMUX_ASR_SEL_DWN_CNT + 1)
#define LHL4362_PFM_PWR_SLICE_DWN_CNT	(LHL4362_VMUX_ASR_SEL_DWN_CNT + 1)
#define LHL4362_CSR_TRIM_ADJ_DWN_CNT	(LHL4362_VMUX_ASR_SEL_DWN_CNT + 1)
#define LHL4362_CSR_VOLTAGE_DWN_CNT	(LHL4362_VMUX_ASR_SEL_DWN_CNT + 1)
#define LHL4362_HPBG_PU_EN_DWN_CNT	(LHL4362_CSR_MODE_DWN_CNT + 1)

#define LHL4362_HPBG_PU_EN_UP_CNT	(LHL4362_UP_CNT + 1)
#define LHL4362_CSR_ADJ_UP_CNT		(LHL4362_HPBG_PU_EN_UP_CNT + 1)
#define LHL4362_CSR_MODE_UP_CNT		(LHL4362_HPBG_PU_EN_UP_CNT + 1)
#define LHL4362_CSR_OVERI_DIS_UP_CNT	(LHL4362_HPBG_PU_EN_UP_CNT + 1)
#define LHL4362_HPBG_CHOP_DIS_UP_CNT	(LHL4362_HPBG_PU_EN_UP_CNT + 1)
#define LHL4362_SRBG_REF_SEL_UP_CNT	(LHL4362_HPBG_PU_EN_UP_CNT + 1)
#define LHL4362_PFM_PWR_SLICE_UP_CNT	(LHL4362_HPBG_PU_EN_UP_CNT + 1)
#define LHL4362_CSR_TRIM_ADJ_UP_CNT	(LHL4362_HPBG_PU_EN_UP_CNT + 1)
#define LHL4362_CSR_VOLTAGE_UP_CNT	(LHL4362_HPBG_PU_EN_UP_CNT + 1)
#define LHL4362_VMUX_ASR_SEL_UP_CNT	(LHL4362_CSR_MODE_UP_CNT + 1)
#define LHL4362_VDDC_SW_DIS_UP_CNT	(LHL4362_VMUX_ASR_SEL_UP_CNT + 1)
#define LHL4362_SLB_EN_UP_CNT		(LHL4362_VDDC_SW_DIS_UP_CNT + 8)
#define LHL4362_ISO_EN_UP_CNT		(LHL4362_SLB_EN_UP_CNT + 1)
#define LHL4362_PWRSW_EN_UP_CNT		(LHL4362_ISO_EN_UP_CNT + 3)
#define LHL4362_ASR_ADJ_UP_CNT		(LHL4362_PWRSW_EN_UP_CNT + 1)
#define LHL4362_ASR_CLK4M_DIS_UP_CNT	(LHL4362_PWRSW_EN_UP_CNT + 1)
#define LHL4362_ASR_LPPFM_MODE_UP_CNT	(LHL4362_PWRSW_EN_UP_CNT + 1)
#define LHL4362_ASR_MODE_SEL_UP_CNT	(LHL4362_PWRSW_EN_UP_CNT + 1)
#define LHL4362_ASR_MANUAL_MODE_UP_CNT	(LHL4362_PWRSW_EN_UP_CNT + 1)
#define LHL4362_ASR_OVERI_DIS_UP_CNT	(LHL4362_PWRSW_EN_UP_CNT + 1)
#define LHL4362_ASR_TRIM_ADJ_UP_CNT	(LHL4362_PWRSW_EN_UP_CNT + 1)

/* 4378 LHL register settings */
#define LHL4378_CSR_OVERI_DIS_DWN_CNT		5u
#define LHL4378_CSR_MODE_DWN_CNT		5u
#define LHL4378_CSR_ADJ_DWN_CNT		5u

#define LHL4378_CSR_OVERI_DIS_UP_CNT		1u
#define LHL4378_CSR_MODE_UP_CNT		1u
#define LHL4378_CSR_ADJ_UP_CNT			1u

#define LHL4378_VDDC_SW_DIS_DWN_CNT		3u
#define LHL4378_ASR_ADJ_DWN_CNT		3u
#define LHL4378_HPBG_CHOP_DIS_DWN_CNT		0

#define LHL4378_VDDC_SW_DIS_UP_CNT		3u
#define LHL4378_ASR_ADJ_UP_CNT			1u
#define LHL4378_HPBG_CHOP_DIS_UP_CNT		0

#define LHL4378_ASR_MANUAL_MODE_DWN_CNT	5u
#define LHL4378_ASR_MODE_SEL_DWN_CNT		5u
#define LHL4378_ASR_LPPFM_MODE_DWN_CNT		5u
#define LHL4378_ASR_CLK4M_DIS_DWN_CNT		0

#define LHL4378_ASR_MANUAL_MODE_UP_CNT		1u
#define LHL4378_ASR_MODE_SEL_UP_CNT		1u
#define LHL4378_ASR_LPPFM_MODE_UP_CNT		1u
#define LHL4378_ASR_CLK4M_DIS_UP_CNT		0

#define LHL4378_PFM_PWR_SLICE_DWN_CNT		5u
#define LHL4378_ASR_OVERI_DIS_DWN_CNT		5u
#define LHL4378_SRBG_REF_SEL_DWN_CNT		5u
#define LHL4378_HPBG_PU_EN_DWN_CNT		6u

#define LHL4378_PFM_PWR_SLICE_UP_CNT		1u
#define LHL4378_ASR_OVERI_DIS_UP_CNT		1u
#define LHL4378_SRBG_REF_SEL_UP_CNT		1u
#define LHL4378_HPBG_PU_EN_UP_CNT		0

#define	LHL4378_CSR_TRIM_ADJ_CNT_SHIFT		(16u)
#define	LHL4378_CSR_TRIM_ADJ_CNT_MASK		(0x3Fu << LHL4378_CSR_TRIM_ADJ_CNT_SHIFT)
#define LHL4378_CSR_TRIM_ADJ_DWN_CNT		0
#define LHL4378_CSR_TRIM_ADJ_UP_CNT		0

#define	LHL4378_ASR_TRIM_ADJ_CNT_SHIFT		(0u)
#define	LHL4378_ASR_TRIM_ADJ_CNT_MASK		(0x3Fu << LHL4378_ASR_TRIM_ADJ_CNT_SHIFT)
#define LHL4378_ASR_TRIM_ADJ_UP_CNT		0
#define LHL4378_ASR_TRIM_ADJ_DWN_CNT		0

#define LHL4378_PWRSW_EN_DWN_CNT		0
#define LHL4378_SLB_EN_DWN_CNT			2u
#define LHL4378_ISO_EN_DWN_CNT			1u

#define LHL4378_VMUX_ASR_SEL_DWN_CNT		4u

#define LHL4378_PWRSW_EN_UP_CNT		6u
#define LHL4378_SLB_EN_UP_CNT			4u
#define LHL4378_ISO_EN_UP_CNT			5u

#define LHL4378_VMUX_ASR_SEL_UP_CNT		2u

#define LHL4387_VMUX_ASR_SEL_DWN_CNT		(8u)
#define LHL4387_VMUX_ASR_SEL_UP_CNT		(0x14u)

/* 4387 LHL register settings for top off mode */
#define LHL4387_TO_CSR_OVERI_DIS_DWN_CNT	3u
#define LHL4387_TO_CSR_MODE_DWN_CNT		3u
#define LHL4387_TO_CSR_ADJ_DWN_CNT		0

#define LHL4387_TO_CSR_OVERI_DIS_UP_CNT	1u
#define LHL4387_TO_CSR_MODE_UP_CNT		1u
#define LHL4387_TO_CSR_ADJ_UP_CNT		0

#define LHL4387_TO_VDDC_SW_DIS_DWN_CNT		4u
#define LHL4387_TO_ASR_ADJ_DWN_CNT		3u
#define LHL4387_TO_LP_MODE_DWN_CNT		6u
#define LHL4387_TO_HPBG_CHOP_DIS_DWN_CNT	3u

#define LHL4387_TO_VDDC_SW_DIS_UP_CNT		0
#define LHL4387_TO_ASR_ADJ_UP_CNT		1u
#define LHL4387_TO_LP_MODE_UP_CNT		0
#define LHL4387_TO_HPBG_CHOP_DIS_UP_CNT	1u

#define LHL4387_TO_ASR_MANUAL_MODE_DWN_CNT	3u
#define LHL4387_TO_ASR_MODE_SEL_DWN_CNT	3u
#define LHL4387_TO_ASR_LPPFM_MODE_DWN_CNT	3u
#define LHL4387_TO_ASR_CLK4M_DIS_DWN_CNT	3u

#define LHL4387_TO_ASR_MANUAL_MODE_UP_CNT	1u
#define LHL4387_TO_ASR_MODE_SEL_UP_CNT		1u
#define LHL4387_TO_ASR_LPPFM_MODE_UP_CNT	1u
#define LHL4387_TO_ASR_CLK4M_DIS_UP_CNT	1u

#define LHL4387_TO_PFM_PWR_SLICE_DWN_CNT	3u
#define LHL4387_TO_ASR_OVERI_DIS_DWN_CNT	3u
#define LHL4387_TO_SRBG_REF_SEL_DWN_CNT	3u
#define LHL4387_TO_HPBG_PU_EN_DWN_CNT		4u

#define LHL4387_TO_PFM_PWR_SLICE_UP_CNT	1u
#define LHL4387_TO_ASR_OVERI_DIS_UP_CNT	1u
#define LHL4387_TO_SRBG_REF_SEL_UP_CNT		1u
#define LHL4387_TO_HPBG_PU_EN_UP_CNT		1u

#define LHL4387_TO_PWRSW_EN_DWN_CNT		0
#define LHL4387_TO_SLB_EN_DWN_CNT		4u
#define LHL4387_TO_ISO_EN_DWN_CNT		2u
#define LHL4387_TO_TOP_SLP_EN_DWN_CNT		0

#define LHL4387_TO_PWRSW_EN_UP_CNT		0x16u
#define LHL4387_TO_SLB_EN_UP_CNT		0xeu
#define LHL4387_TO_ISO_EN_UP_CNT		0x10u
#define LHL4387_TO_TOP_SLP_EN_UP_CNT		2u

/* MacResourceReqTimer0/1 */
#define MAC_RSRC_REQ_TIMER_INT_ENAB_SHIFT	24
#define MAC_RSRC_REQ_TIMER_FORCE_ALP_SHIFT	26
#define MAC_RSRC_REQ_TIMER_FORCE_HT_SHIFT	27
#define MAC_RSRC_REQ_TIMER_FORCE_HQ_SHIFT	28
#define MAC_RSRC_REQ_TIMER_CLKREQ_GRP_SEL_SHIFT	29

/* for pmu rev32 and higher */
#define PMU32_MAC_MAIN_RSRC_REQ_TIMER	((1 << MAC_RSRC_REQ_TIMER_INT_ENAB_SHIFT) |	\
					 (1 << MAC_RSRC_REQ_TIMER_FORCE_ALP_SHIFT) |	\
					 (1 << MAC_RSRC_REQ_TIMER_FORCE_HT_SHIFT) |	\
					 (1 << MAC_RSRC_REQ_TIMER_FORCE_HQ_SHIFT) |	\
					 (0 << MAC_RSRC_REQ_TIMER_CLKREQ_GRP_SEL_SHIFT))

#define PMU32_MAC_AUX_RSRC_REQ_TIMER	((1 << MAC_RSRC_REQ_TIMER_INT_ENAB_SHIFT) |	\
					 (1 << MAC_RSRC_REQ_TIMER_FORCE_ALP_SHIFT) |	\
					 (1 << MAC_RSRC_REQ_TIMER_FORCE_HT_SHIFT) |	\
					 (1 << MAC_RSRC_REQ_TIMER_FORCE_HQ_SHIFT) |	\
					 (0 << MAC_RSRC_REQ_TIMER_CLKREQ_GRP_SEL_SHIFT))

/* for pmu rev38 and higher */
#define PMU32_MAC_SCAN_RSRC_REQ_TIMER	((1u << MAC_RSRC_REQ_TIMER_INT_ENAB_SHIFT) |	\
					 (1u << MAC_RSRC_REQ_TIMER_FORCE_ALP_SHIFT) |	\
					 (1u << MAC_RSRC_REQ_TIMER_FORCE_HT_SHIFT) |	\
					 (1u << MAC_RSRC_REQ_TIMER_FORCE_HQ_SHIFT) |	\
					 (0u << MAC_RSRC_REQ_TIMER_CLKREQ_GRP_SEL_SHIFT))

/* 4369 related: 4369 parameters
 * http://www.sj.broadcom.com/projects/BCM4369/gallery_backend.RC6.0/design/backplane/pmu_params.xls
 */
#define RES4369_DUMMY				0
#define RES4369_ABUCK				1
#define RES4369_PMU_SLEEP			2
#define RES4369_MISCLDO_PU			3
#define RES4369_LDO3P3_PU			4
#define RES4369_FAST_LPO_AVAIL			5
#define RES4369_XTAL_PU				6
#define RES4369_XTAL_STABLE			7
#define RES4369_PWRSW_DIG			8
#define RES4369_SR_DIG				9
#define RES4369_SLEEP_DIG			10
#define RES4369_PWRSW_AUX			11
#define RES4369_SR_AUX				12
#define RES4369_SLEEP_AUX			13
#define RES4369_PWRSW_MAIN			14
#define RES4369_SR_MAIN				15
#define RES4369_SLEEP_MAIN			16
#define RES4369_DIG_CORE_RDY			17
#define RES4369_CORE_RDY_AUX			18
#define RES4369_ALP_AVAIL			19
#define RES4369_RADIO_AUX_PU			20
#define RES4369_MINIPMU_AUX_PU			21
#define RES4369_CORE_RDY_MAIN			22
#define RES4369_RADIO_MAIN_PU			23
#define RES4369_MINIPMU_MAIN_PU			24
#define RES4369_PCIE_EP_PU			25
#define RES4369_COLD_START_WAIT			26
#define RES4369_ARMHTAVAIL			27
#define RES4369_HT_AVAIL			28
#define RES4369_MACPHY_AUX_CLK_AVAIL		29
#define RES4369_MACPHY_MAIN_CLK_AVAIL		30
#define RES4369_RESERVED_31			31

#define CST4369_CHIPMODE_SDIOD(cs)	(((cs) & (1 << 6)) != 0)	/* SDIO */
#define CST4369_CHIPMODE_PCIE(cs)	(((cs) & (1 << 7)) != 0)	/* PCIE */
#define CST4369_SPROM_PRESENT		0x00000010

#define PMU_4369_MACCORE_0_RES_REQ_MASK			0x3FCBF7FF
#define PMU_4369_MACCORE_1_RES_REQ_MASK			0x7FFB3647

/* 4362 related */
/* 4362 resource_table
 * http://www.sj.broadcom.com/projects/BCM4362/gallery_backend.RC1.mar_15_2017/design/backplane/
 * pmu_params.xls
 */
#define RES4362_DUMMY				(0u)
#define RES4362_ABUCK				(1u)
#define RES4362_PMU_SLEEP			(2u)
#define RES4362_MISCLDO_PU			(3u)
#define RES4362_LDO3P3_PU			(4u)
#define RES4362_FAST_LPO_AVAIL			(5u)
#define RES4362_XTAL_PU				(6u)
#define RES4362_XTAL_STABLE			(7u)
#define RES4362_PWRSW_DIG			(8u)
#define RES4362_SR_DIG				(9u)
#define RES4362_SLEEP_DIG			(10u)
#define RES4362_PWRSW_AUX			(11u)
#define RES4362_SR_AUX				(12u)
#define RES4362_SLEEP_AUX			(13u)
#define RES4362_PWRSW_MAIN			(14u)
#define RES4362_SR_MAIN				(15u)
#define RES4362_SLEEP_MAIN			(16u)
#define RES4362_DIG_CORE_RDY			(17u)
#define RES4362_CORE_RDY_AUX			(18u)
#define RES4362_ALP_AVAIL			(19u)
#define RES4362_RADIO_AUX_PU			(20u)
#define RES4362_MINIPMU_AUX_PU			(21u)
#define RES4362_CORE_RDY_MAIN			(22u)
#define RES4362_RADIO_MAIN_PU			(23u)
#define RES4362_MINIPMU_MAIN_PU			(24u)
#define RES4362_PCIE_EP_PU			(25u)
#define RES4362_COLD_START_WAIT			(26u)
#define RES4362_ARMHTAVAIL			(27u)
#define RES4362_HT_AVAIL			(28u)
#define RES4362_MACPHY_AUX_CLK_AVAIL		(29u)
#define RES4362_MACPHY_MAIN_CLK_AVAIL		(30u)
#define RES4362_RESERVED_31			(31u)

#define CST4362_CHIPMODE_SDIOD(cs)		(((cs) & (1 << 6)) != 0)	/* SDIO */
#define CST4362_CHIPMODE_PCIE(cs)		(((cs) & (1 << 7)) != 0)	/* PCIE */
#define CST4362_SPROM_PRESENT			(0x00000010u)

#define PMU_4362_MACCORE_0_RES_REQ_MASK		(0x3FCBF7FFu)
#define PMU_4362_MACCORE_1_RES_REQ_MASK		(0x7FFB3647u)

#define PMU_MACCORE_0_RES_REQ_TIMER		0x1d000000
#define PMU_MACCORE_0_RES_REQ_MASK		0x5FF2364F

#define PMU43012_MAC_RES_REQ_TIMER		0x1D000000
#define PMU43012_MAC_RES_REQ_MASK		0x3FBBF7FF

#define PMU_MACCORE_1_RES_REQ_TIMER		0x1d000000
#define PMU_MACCORE_1_RES_REQ_MASK		0x5FF2364F

/* defines to detect active host interface in use */
#define CHIP_HOSTIF_PCIEMODE	0x1
#define CHIP_HOSTIF_USBMODE	0x2
#define CHIP_HOSTIF_SDIOMODE	0x4
#define CHIP_HOSTIF_PCIE(sih)	(si_chip_hostif(sih) == CHIP_HOSTIF_PCIEMODE)
#define CHIP_HOSTIF_USB(sih)	(si_chip_hostif(sih) == CHIP_HOSTIF_USBMODE)
#define CHIP_HOSTIF_SDIO(sih)	(si_chip_hostif(sih) == CHIP_HOSTIF_SDIOMODE)

#define PATCHTBL_SIZE			(0x800)
#define CR4_4335_RAM_BASE                    (0x180000)
#define CR4_4345_LT_C0_RAM_BASE              (0x1b0000)
#define CR4_4345_GE_C0_RAM_BASE              (0x198000)
#define CR4_4349_RAM_BASE                    (0x180000)
#define CR4_4349_RAM_BASE_FROM_REV_9         (0x160000)
#define CR4_4350_RAM_BASE                    (0x180000)
#define CR4_4360_RAM_BASE                    (0x0)
#define CR4_43602_RAM_BASE                   (0x180000)

#define CR4_4347_RAM_BASE                    (0x170000)
#define CR4_4362_RAM_BASE                    (0x170000)
#define CR4_4364_RAM_BASE                    (0x160000)
#define CR4_4369_RAM_BASE                    (0x170000)
#define CR4_4377_RAM_BASE                    (0x170000)
#define CR4_43751_RAM_BASE                   (0x170000)
#define CR4_43752_RAM_BASE                   (0x170000)
#define CR4_4376_RAM_BASE                    (0x352000)
#define CR4_4378_RAM_BASE                    (0x352000)
#define CR4_4387_RAM_BASE                    (0x740000)
#define CR4_4385_RAM_BASE                    (0x740000)
#define CA7_4388_RAM_BASE                    (0x200000)
#define CA7_4389_RAM_BASE                    (0x200000)
#define CA7_4385_RAM_BASE                    (0x200000)

/* Physical memory in 4388a0 HWA is 64KB (8192 x 64 bits) even though
 * the memory space allows 192KB (0x1850_0000 - 0x1852_FFFF)
 */
#define HWA_MEM_BASE_4388			(0x18520000u)
#define HWA_MEM_SIZE_4388			(0x10000u)

/* 43012 PMU resources based on pmu_params.xls  - Start */
#define RES43012_MEMLPLDO_PU			0
#define RES43012_PMU_SLEEP			1
#define RES43012_FAST_LPO			2
#define RES43012_BTLPO_3P3			3
#define RES43012_SR_POK				4
#define RES43012_DUMMY_PWRSW			5
#define RES43012_DUMMY_LDO3P3			6
#define RES43012_DUMMY_BT_LDO3P3		7
#define RES43012_DUMMY_RADIO			8
#define RES43012_VDDB_VDDRET			9
#define RES43012_HV_LDO3P3			10
#define RES43012_OTP_PU				11
#define RES43012_XTAL_PU			12
#define RES43012_SR_CLK_START			13
#define RES43012_XTAL_STABLE			14
#define RES43012_FCBS				15
#define RES43012_CBUCK_MODE			16
#define RES43012_CORE_READY			17
#define RES43012_ILP_REQ			18
#define RES43012_ALP_AVAIL			19
#define RES43012_RADIOLDO_1P8			20
#define RES43012_MINI_PMU			21
#define RES43012_UNUSED				22
#define RES43012_SR_SAVE_RESTORE		23
#define RES43012_PHY_PWRSW			24
#define RES43012_VDDB_CLDO			25
#define RES43012_SUBCORE_PWRSW			26
#define RES43012_SR_SLEEP			27
#define RES43012_HT_START			28
#define RES43012_HT_AVAIL			29
#define RES43012_MACPHY_CLK_AVAIL		30
#define CST43012_SPROM_PRESENT        0x00000010

/* SR Control0 bits */
#define SR0_43012_SR_ENG_EN_MASK             0x1u
#define SR0_43012_SR_ENG_EN_SHIFT            0u
#define SR0_43012_SR_ENG_CLK_EN              (1u << 1u)
#define SR0_43012_SR_RSRC_TRIGGER            (0xCu << 2u)
#define SR0_43012_SR_WD_MEM_MIN_DIV          (0x3u << 6u)
#define SR0_43012_SR_MEM_STBY_ALLOW_MSK      (1u << 16u)
#define SR0_43012_SR_MEM_STBY_ALLOW_SHIFT    16u
#define SR0_43012_SR_ENABLE_ILP              (1u << 17u)
#define SR0_43012_SR_ENABLE_ALP              (1u << 18u)
#define SR0_43012_SR_ENABLE_HT               (1u << 19u)
#define SR0_43012_SR_ALLOW_PIC               (3u << 20u)
#define SR0_43012_SR_PMU_MEM_DISABLE         (1u << 30u)
#define CC_43012_VDDM_PWRSW_EN_MASK          (1u << 20u)
#define CC_43012_VDDM_PWRSW_EN_SHIFT         (20u)
#define CC_43012_SDIO_AOS_WAKEUP_MASK        (1u << 24u)
#define CC_43012_SDIO_AOS_WAKEUP_SHIFT       (24u)

/* 43012 - offset at 5K */
#define SR1_43012_SR_INIT_ADDR_MASK          0x3ffu
#define SR1_43012_SR_ASM_ADDR                0xAu

/* PLL usage in 43012 */
#define PMU43012_PLL0_PC0_NDIV_INT_MASK			0x0000003fu
#define PMU43012_PLL0_PC0_NDIV_INT_SHIFT		0u
#define PMU43012_PLL0_PC0_NDIV_FRAC_MASK		0xfffffc00u
#define PMU43012_PLL0_PC0_NDIV_FRAC_SHIFT		10u
#define PMU43012_PLL0_PC3_PDIV_MASK			0x00003c00u
#define PMU43012_PLL0_PC3_PDIV_SHIFT			10u
#define PMU43012_PLL_NDIV_FRAC_BITS			20u
#define PMU43012_PLL_P_DIV_SCALE_BITS			10u

#define CCTL_43012_ARM_OFFCOUNT_MASK			0x00000003u
#define CCTL_43012_ARM_OFFCOUNT_SHIFT			0u
#define CCTL_43012_ARM_ONCOUNT_MASK			0x0000000cu
#define CCTL_43012_ARM_ONCOUNT_SHIFT			2u

/* PMU Rev >= 30 */
#define PMU30_ALPCLK_ONEMHZ_ENAB			0x80000000u

/* 43012 PMU Chip Control Registers */
#define PMUCCTL02_43012_SUBCORE_PWRSW_FORCE_ON		0x00000010u
#define PMUCCTL02_43012_PHY_PWRSW_FORCE_ON		0x00000040u
#define PMUCCTL02_43012_LHL_TIMER_SELECT		0x00000800u
#define PMUCCTL02_43012_RFLDO3P3_PU_FORCE_ON		0x00008000u
#define PMUCCTL02_43012_WL2CDIG_I_PMU_SLEEP_ENAB	0x00010000u
#define PMUCCTL02_43012_BTLDO3P3_PU_FORCE_OFF		(1u << 12u)

#define PMUCCTL04_43012_BBPLL_ENABLE_PWRDN			0x00100000u
#define PMUCCTL04_43012_BBPLL_ENABLE_PWROFF			0x00200000u
#define PMUCCTL04_43012_FORCE_BBPLL_ARESET			0x00400000u
#define PMUCCTL04_43012_FORCE_BBPLL_DRESET			0x00800000u
#define PMUCCTL04_43012_FORCE_BBPLL_PWRDN			0x01000000u
#define PMUCCTL04_43012_FORCE_BBPLL_ISOONHIGH			0x02000000u
#define PMUCCTL04_43012_FORCE_BBPLL_PWROFF			0x04000000u
#define PMUCCTL04_43012_DISABLE_LQ_AVAIL			0x08000000u
#define PMUCCTL04_43012_DISABLE_HT_AVAIL			0x10000000u
#define PMUCCTL04_43012_USE_LOCK				0x20000000u
#define PMUCCTL04_43012_OPEN_LOOP_ENABLE			0x40000000u
#define PMUCCTL04_43012_FORCE_OPEN_LOOP				0x80000000u
#define PMUCCTL05_43012_DISABLE_SPM_CLK				(1u << 8u)
#define PMUCCTL05_43012_RADIO_DIG_CLK_GATING_EN			(1u << 14u)
#define PMUCCTL06_43012_GCI2RDIG_USE_ASYNCAPB			(1u << 31u)
#define PMUCCTL08_43012_XTAL_CORE_SIZE_PMOS_NORMAL_MASK		0x00000FC0u
#define PMUCCTL08_43012_XTAL_CORE_SIZE_PMOS_NORMAL_SHIFT	6u
#define PMUCCTL08_43012_XTAL_CORE_SIZE_NMOS_NORMAL_MASK		0x00FC0000u
#define PMUCCTL08_43012_XTAL_CORE_SIZE_NMOS_NORMAL_SHIFT	18u
#define PMUCCTL08_43012_XTAL_SEL_BIAS_RES_NORMAL_MASK		0x07000000u
#define PMUCCTL08_43012_XTAL_SEL_BIAS_RES_NORMAL_SHIFT		24u
#define PMUCCTL09_43012_XTAL_CORESIZE_BIAS_ADJ_NORMAL_MASK	0x0003F000u
#define PMUCCTL09_43012_XTAL_CORESIZE_BIAS_ADJ_NORMAL_SHIFT	12u
#define PMUCCTL09_43012_XTAL_CORESIZE_RES_BYPASS_NORMAL_MASK	0x00000038u
#define PMUCCTL09_43012_XTAL_CORESIZE_RES_BYPASS_NORMAL_SHIFT	3u

#define PMUCCTL09_43012_XTAL_CORESIZE_BIAS_ADJ_STARTUP_MASK	0x00000FC0u
#define PMUCCTL09_43012_XTAL_CORESIZE_BIAS_ADJ_STARTUP_SHIFT	6u
/* during normal operation normal value is reduced for optimized power */
#define PMUCCTL09_43012_XTAL_CORESIZE_BIAS_ADJ_STARTUP_VAL	0x1Fu

#define PMUCCTL13_43012_FCBS_UP_TRIG_EN				0x00000400

#define PMUCCTL14_43012_ARMCM3_RESET_INITVAL			0x00000001
#define PMUCCTL14_43012_DOT11MAC_CLKEN_INITVAL			0x00000020
#define PMUCCTL14_43012_DOT11MAC_PHY_CLK_EN_INITVAL		0x00000080
#define PMUCCTL14_43012_DOT11MAC_PHY_CNTL_EN_INITVAL		0x00000200
#define PMUCCTL14_43012_SDIOD_RESET_INIVAL			0x00000400
#define PMUCCTL14_43012_SDIO_CLK_DMN_RESET_INITVAL		0x00001000
#define PMUCCTL14_43012_SOCRAM_CLKEN_INITVAL			0x00004000
#define PMUCCTL14_43012_M2MDMA_RESET_INITVAL			0x00008000
#define PMUCCTL14_43012_DISABLE_LQ_AVAIL			0x08000000

#define VREG6_43012_MEMLPLDO_ADJ_MASK				0x0000F000
#define VREG6_43012_MEMLPLDO_ADJ_SHIFT				12

#define VREG6_43012_LPLDO_ADJ_MASK				0x000000F0
#define VREG6_43012_LPLDO_ADJ_SHIFT				4

#define VREG7_43012_PWRSW_1P8_PU_MASK				0x00400000
#define VREG7_43012_PWRSW_1P8_PU_SHIFT				22

/* 4378 PMU Chip Control Registers */
#define PMUCCTL03_4378_XTAL_CORESIZE_PMOS_NORMAL_MASK		0x001F8000
#define PMUCCTL03_4378_XTAL_CORESIZE_PMOS_NORMAL_SHIFT		15
#define PMUCCTL03_4378_XTAL_CORESIZE_PMOS_NORMAL_VAL		0x3F

#define PMUCCTL03_4378_XTAL_CORESIZE_NMOS_NORMAL_MASK		0x07E00000
#define PMUCCTL03_4378_XTAL_CORESIZE_NMOS_NORMAL_SHIFT		21
#define PMUCCTL03_4378_XTAL_CORESIZE_NMOS_NORMAL_VAL		0x3F

#define PMUCCTL03_4378_XTAL_SEL_BIAS_RES_NORMAL_MASK		0x38000000
#define PMUCCTL03_4378_XTAL_SEL_BIAS_RES_NORMAL_SHIFT		27
#define PMUCCTL03_4378_XTAL_SEL_BIAS_RES_NORMAL_VAL			0x0

#define PMUCCTL00_4378_XTAL_CORESIZE_BIAS_ADJ_NORMAL_MASK	0x00000FC0
#define PMUCCTL00_4378_XTAL_CORESIZE_BIAS_ADJ_NORMAL_SHIFT	6
#define PMUCCTL00_4378_XTAL_CORESIZE_BIAS_ADJ_NORMAL_VAL	0x5

#define PMUCCTL00_4378_XTAL_RES_BYPASS_NORMAL_MASK			0x00038000
#define PMUCCTL00_4378_XTAL_RES_BYPASS_NORMAL_SHIFT			15
#define PMUCCTL00_4378_XTAL_RES_BYPASS_NORMAL_VAL			0x7

/* 4387 PMU Chip Control Registers */
#define PMUCCTL03_4387_XTAL_CORESIZE_PMOS_NORMAL_MASK		0x001F8000
#define PMUCCTL03_4387_XTAL_CORESIZE_PMOS_NORMAL_SHIFT		15
#define PMUCCTL03_4387_XTAL_CORESIZE_PMOS_NORMAL_VAL		0x3F

#define PMUCCTL03_4387_XTAL_CORESIZE_NMOS_NORMAL_MASK		0x07E00000
#define PMUCCTL03_4387_XTAL_CORESIZE_NMOS_NORMAL_SHIFT		21
#define PMUCCTL03_4387_XTAL_CORESIZE_NMOS_NORMAL_VAL		0x3F

#define PMUCCTL03_4387_XTAL_SEL_BIAS_RES_NORMAL_MASK		0x38000000
#define PMUCCTL03_4387_XTAL_SEL_BIAS_RES_NORMAL_SHIFT		27
#define PMUCCTL03_4387_XTAL_SEL_BIAS_RES_NORMAL_VAL			0x0

#define PMUCCTL00_4387_XTAL_CORESIZE_BIAS_ADJ_NORMAL_MASK	0x00000FC0
#define PMUCCTL00_4387_XTAL_CORESIZE_BIAS_ADJ_NORMAL_SHIFT	6
#define PMUCCTL00_4387_XTAL_CORESIZE_BIAS_ADJ_NORMAL_VAL	0x5

#define PMUCCTL00_4387_XTAL_RES_BYPASS_NORMAL_MASK			0x00038000
#define PMUCCTL00_4387_XTAL_RES_BYPASS_NORMAL_SHIFT			15
#define PMUCCTL00_4387_XTAL_RES_BYPASS_NORMAL_VAL			0x7

/* GPIO pins */
#define CC_PIN_GPIO_00	(0u)
#define CC_PIN_GPIO_01	(1u)
#define CC_PIN_GPIO_02	(2u)
#define CC_PIN_GPIO_03	(3u)
#define CC_PIN_GPIO_04	(4u)
#define CC_PIN_GPIO_05	(5u)
#define CC_PIN_GPIO_06	(6u)
#define CC_PIN_GPIO_07	(7u)
#define CC_PIN_GPIO_08	(8u)
#define CC_PIN_GPIO_09	(9u)
#define CC_PIN_GPIO_10	(10u)
#define CC_PIN_GPIO_11	(11u)
#define CC_PIN_GPIO_12	(12u)
#define CC_PIN_GPIO_13	(13u)
#define CC_PIN_GPIO_14	(14u)
#define CC_PIN_GPIO_15	(15u)
#define CC_PIN_GPIO_16	(16u)
#define CC_PIN_GPIO_17	(17u)
#define CC_PIN_GPIO_18	(18u)
#define CC_PIN_GPIO_19	(19u)
#define CC_PIN_GPIO_20	(20u)
#define CC_PIN_GPIO_21	(21u)
#define CC_PIN_GPIO_22	(22u)
#define CC_PIN_GPIO_23	(23u)
#define CC_PIN_GPIO_24	(24u)
#define CC_PIN_GPIO_25	(25u)
#define CC_PIN_GPIO_26	(26u)
#define CC_PIN_GPIO_27	(27u)
#define CC_PIN_GPIO_28	(28u)
#define CC_PIN_GPIO_29	(29u)
#define CC_PIN_GPIO_30	(30u)
#define CC_PIN_GPIO_31	(31u)

/* Last GPIO Pad */
#define CC_PIN_GPIO_LAST CC_PIN_GPIO_31

/* GCI chipcontrol register indices */
#define CC_GCI_CHIPCTRL_00	(0)
#define CC_GCI_CHIPCTRL_01	(1)
#define CC_GCI_CHIPCTRL_02	(2)
#define CC_GCI_CHIPCTRL_03	(3)
#define CC_GCI_CHIPCTRL_04	(4)
#define CC_GCI_CHIPCTRL_05	(5)
#define CC_GCI_CHIPCTRL_06	(6)
#define CC_GCI_CHIPCTRL_07	(7)
#define CC_GCI_CHIPCTRL_08	(8)
#define CC_GCI_CHIPCTRL_09	(9)
#define CC_GCI_CHIPCTRL_10	(10)
#define CC_GCI_CHIPCTRL_10	(10)
#define CC_GCI_CHIPCTRL_11	(11)
#define CC_GCI_CHIPCTRL_12	(12)
#define CC_GCI_CHIPCTRL_13	(13)
#define CC_GCI_CHIPCTRL_14	(14)
#define CC_GCI_CHIPCTRL_15	(15)
#define CC_GCI_CHIPCTRL_16	(16)
#define CC_GCI_CHIPCTRL_17	(17)
#define CC_GCI_CHIPCTRL_18	(18)
#define CC_GCI_CHIPCTRL_19	(19)
#define CC_GCI_CHIPCTRL_20	(20)
#define CC_GCI_CHIPCTRL_21	(21)
#define CC_GCI_CHIPCTRL_22	(22)
#define CC_GCI_CHIPCTRL_23	(23)
#define CC_GCI_CHIPCTRL_24	(24)
#define CC_GCI_CHIPCTRL_25	(25)
#define CC_GCI_CHIPCTRL_26	(26)
#define CC_GCI_CHIPCTRL_27	(27)
#define CC_GCI_CHIPCTRL_28	(28)

/* GCI chip ctrl SDTC Soft reset */
#define GCI_CHIP_CTRL_SDTC_SOFT_RESET       (1 << 31)

#define CC_GCI_XTAL_BUFSTRG_NFC (0xff << 12)

#define CC_GCI_04_SDIO_DRVSTR_SHIFT	15
#define CC_GCI_04_SDIO_DRVSTR_MASK	(0x0f << CC_GCI_04_SDIO_DRVSTR_SHIFT)	/* 0x00078000 */
#define CC_GCI_04_SDIO_DRVSTR_OVERRIDE_BIT	(1 << 18)
#define CC_GCI_04_SDIO_DRVSTR_DEFAULT_MA	14
#define CC_GCI_04_SDIO_DRVSTR_MIN_MA	2
#define CC_GCI_04_SDIO_DRVSTR_MAX_MA	16

#define CC_GCI_04_4387C0_XTAL_PM_CLK	(1u << 20u)

#define CC_GCI_05_4387C0_AFE_RET_ENB_MASK	(1u << 7u)

#define CC_GCI_CHIPCTRL_07_BTDEFLO_ANT0_NBIT	2u
#define CC_GCI_CHIPCTRL_07_BTDEFLO_ANT0_MASK	0xFu
#define CC_GCI_CHIPCTRL_07_BTDEFHI_ANT0_NBIT	11u
#define CC_GCI_CHIPCTRL_07_BTDEFHI_ANT0_MASK	1u

#define CC_GCI_CHIPCTRL_18_BTDEF_ANT0_NBIT		10u
#define CC_GCI_CHIPCTRL_18_BTDEF_ANT0_MASK		0x1Fu
#define CC_GCI_CHIPCTRL_18_BTDEFLO_ANT1_NBIT	15u
#define CC_GCI_CHIPCTRL_18_BTDEFLO_ANT1_MASK	1u
#define CC_GCI_CHIPCTRL_18_BTDEFHI_ANT1_NBIT	26u
#define CC_GCI_CHIPCTRL_18_BTDEFHI_ANT1_MASK	0x3Fu

#define CC_GCI_CHIPCTRL_19_BTDEF_ANT1_NBIT		10u
#define CC_GCI_CHIPCTRL_19_BTDEF_ANT1_MASK		0x7u

#define CC_GCI_CHIPCTRL_23_MAIN_WLSC_PRISEL_FORCE_NBIT		16u
#define CC_GCI_CHIPCTRL_23_MAIN_WLSC_PRISEL_VAL_NBIT		17u
#define CC_GCI_CHIPCTRL_23_AUX_WLSC_PRISEL_FORCE_NBIT		18u
#define CC_GCI_CHIPCTRL_23_AUX_WLSC_PRISEL_VAL_NBIT		19u
#define CC_GCI_CHIPCTRL_23_WLSC_BTSC_PRISEL_FORCE_NBIT		20u
#define CC_GCI_CHIPCTRL_23_WLSC_BTSC_PRISEL_VAL_NBIT		21u
#define CC_GCI_CHIPCTRL_23_WLSC_BTMAIN_PRISEL_FORCE_NBIT	22u
#define CC_GCI_CHIPCTRL_23_WLSC_BTMAIN_PRISEL_VAL_NBIT		23u
#define CC_GCI_CHIPCTRL_23_BTMAIN_BTSC_PRISEL_FORCE_NBIT	24u
#define CC_GCI_CHIPCTRL_23_BTMAIN_BTSC_PRISEL_VAL_NBIT		25u
#define CC_GCI_CHIPCTRL_23_LVM_MODE_DISABLE_NBIT		26u

#define CC_GCI_CHIPCTRL_23_MAIN_WLSC_PRISEL_FORCE_MASK	(1u <<\
				CC_GCI_CHIPCTRL_23_MAIN_WLSC_PRISEL_FORCE_NBIT)
#define CC_GCI_CHIPCTRL_23_MAIN_WLSC_PRISEL_VAL_MASK	(1u <<\
				CC_GCI_CHIPCTRL_23_MAIN_WLSC_PRISEL_VAL_NBIT)
#define CC_GCI_CHIPCTRL_23_AUX_WLSC_PRISEL_FORCE_MASK	(1u <<\
				CC_GCI_CHIPCTRL_23_AUX_WLSC_PRISEL_FORCE_NBIT)
#define CC_GCI_CHIPCTRL_23_AUX_WLSC_PRISEL_VAL_MASK	(1u <<\
				CC_GCI_CHIPCTRL_23_AUX_WLSC_PRISEL_VAL_NBIT)
#define CC_GCI_CHIPCTRL_23_WLSC_BTSC_PRISEL_FORCE_MASK	(1u <<\
				CC_GCI_CHIPCTRL_23_WLSC_BTSC_PRISEL_FORCE_NBIT)
#define CC_GCI_CHIPCTRL_23_WLSC_BTSC_PRISEL_VAL_MASK	(1u <<\
				CC_GCI_CHIPCTRL_23_WLSC_BTSC_PRISEL_VAL_NBIT)
#define CC_GCI_CHIPCTRL_23_WLSC_BTMAIN_PRISEL_FORCE_MASK	(1u <<\
				CC_GCI_CHIPCTRL_23_WLSC_BTMAIN_PRISEL_FORCE_NBIT)
#define CC_GCI_CHIPCTRL_23_WLSC_BTMAIN_PRISEL_VAL_MASK	(1u <<\
				CC_GCI_CHIPCTRL_23_WLSC_BTMAIN_PRISEL_VAL_NBIT)
#define CC_GCI_CHIPCTRL_23_BTMAIN_BTSC_PRISEL_FORCE_MASK	(1u <<\
				CC_GCI_CHIPCTRL_23_BTMAIN_BTSC_PRISEL_FORCE_NBIT)
#define CC_GCI_CHIPCTRL_23_BTMAIN_BTSC_PRISEL_VAL_MASK	(1u <<\
				CC_GCI_CHIPCTRL_23_BTMAIN_BTSC_PRISEL_VAL_NBIT)
#define CC_GCI_CHIPCTRL_23_LVM_MODE_DISABLE_MASK	(1u <<\
				CC_GCI_CHIPCTRL_23_LVM_MODE_DISABLE_NBIT)

/*	2G core0/core1 Pulse width register (offset : 0x47C)
*	wl_rx_long_pulse_width_2g_core0 [4:0];
*	wl_rx_short_pulse_width_2g_core0 [9:5];
*	wl_rx_long_pulse_width_2g_core1  [20:16];
*	wl_rx_short_pulse_width_2g_core1 [25:21];
*/
#define CC_GCI_CNCB_RESET_PULSE_WIDTH_2G_CORE1_NBIT	(16u)
#define CC_GCI_CNCB_RESET_PULSE_WIDTH_2G_CORE0_MASK	(0x1Fu)
#define CC_GCI_CNCB_RESET_PULSE_WIDTH_2G_CORE1_MASK	(0x1Fu <<\
				CC_GCI_CNCB_RESET_PULSE_WIDTH_2G_CORE1_NBIT)

#define CC_GCI_CNCB_SHORT_RESET_PULSE_WIDTH_2G_CORE0_NBIT	(5u)
#define CC_GCI_CNCB_LONG_RESET_PULSE_WIDTH_2G_CORE1_NBIT	(16u)
#define CC_GCI_CNCB_SHORT_RESET_PULSE_WIDTH_2G_CORE1_NBIT	(21u)

#define CC_GCI_CNCB_LONG_RESET_PULSE_WIDTH_2G_CORE0_MASK	(0x1Fu)
#define CC_GCI_CNCB_LONG_RESET_PULSE_WIDTH_2G_CORE1_MASK	(0x1Fu <<\
				CC_GCI_CNCB_LONG_RESET_PULSE_WIDTH_2G_CORE1_NBIT)
#define CC_GCI_CNCB_SHORT_RESET_PULSE_WIDTH_2G_CORE0_MASK	(0x1Fu <<\
				CC_GCI_CNCB_SHORT_RESET_PULSE_WIDTH_2G_CORE0_NBIT)
#define CC_GCI_CNCB_SHORT_RESET_PULSE_WIDTH_2G_CORE1_MASK	(0x1Fu <<\
				CC_GCI_CNCB_SHORT_RESET_PULSE_WIDTH_2G_CORE1_NBIT)

/*	5G core0/Core1 (offset : 0x480)
*	wl_rx_long_pulse_width_5g[4:0];
*	wl_rx_short_pulse_width_5g[9:5]
*/

#define CC_GCI_CNCB_SHORT_RESET_PULSE_WIDTH_5G_NBIT	(5u)

#define CC_GCI_CNCB_LONG_RESET_PULSE_WIDTH_5G_MASK	(0x1Fu)
#define CC_GCI_CNCB_SHORT_RESET_PULSE_WIDTH_5G_MASK	(0x1Fu <<\
				CC_GCI_CNCB_SHORT_RESET_PULSE_WIDTH_5G_NBIT)

#define CC_GCI_CNCB_GLITCH_FILTER_WIDTH_MASK	(0xFFu)

#define CC_GCI_RESET_OVERRIDE_NBIT	0x1u
#define CC_GCI_RESET_OVERRIDE_MASK	(0x1u << \
				CC_GCI_RESET_OVERRIDE_NBIT)

#define CC_GCI_06_JTAG_SEL_SHIFT	4u
#define CC_GCI_06_JTAG_SEL_MASK		(1u << 4u)

#define CC_GCI_NUMCHIPCTRLREGS(cap1)	((cap1 & 0xF00u) >> 8u)

#define CC_GCI_03_LPFLAGS_SFLASH_MASK		(0xFFFFFFu << 8u)
#define CC_GCI_03_LPFLAGS_SFLASH_VAL		(0xCCCCCCu << 8u)

#define CC_GCI_13_INSUFF_TREFUP_FIX_SHIFT	31u
/* Note: For 4368 B0 onwards, the shift offset remains the same,
* but the Chip Common Ctrl GCI register is 16
*/
#define CC_GCI_16_INSUFF_TREFUP_FIX_SHIFT	31u

#define GPIO_CTRL_REG_DISABLE_INTERRUPT		(3u << 9u)
#define GPIO_CTRL_REG_COUNT			40

#ifdef WL_INITVALS
#define XTAL_HQ_SETTING_4387	(wliv_pmu_xtal_HQ)
#define XTAL_LQ_SETTING_4387	(wliv_pmu_xtal_LQ)
#else
#define XTAL_HQ_SETTING_4387	(0xFFF94D30u)
#define XTAL_LQ_SETTING_4387	(0xFFF94380u)
#endif

#define CC_GCI_16_BBPLL_CH_CTRL_GRP_PD_TRIG_1_MASK		(0x00000200u)
#define CC_GCI_16_BBPLL_CH_CTRL_GRP_PD_TRIG_1_SHIFT		(9u)
#define CC_GCI_16_BBPLL_CH_CTRL_GRP_PD_TRIG_24_3_MASK		(0xFFFFFC00u)
#define CC_GCI_16_BBPLL_CH_CTRL_GRP_PD_TRIG_24_3_SHIFT		(10u)

#define CC_GCI_17_BBPLL_CH_CTRL_GRP_PD_TRIG_30_25_MASK		(0x0000FC00u)
#define CC_GCI_17_BBPLL_CH_CTRL_GRP_PD_TRIG_30_25_SHIFT		(10u)
#define CC_GCI_17_BBPLL_CH_CTRL_EN_MASK				(0x04000000u)

#define CC_GCI_20_BBPLL_CH_CTRL_GRP_MASK			(0xFC000000u)
#define CC_GCI_20_BBPLL_CH_CTRL_GRP_SHIFT			(26u)

/* GCI Chip Ctrl Regs */
#define GCI_CC28_IHRP_SEL_MASK			(7 << 24)
#define GCI_CC28_IHRP_SEL_SHIFT			(24u)

/* 30=MACPHY_CLK_MAIN, 29=MACPHY_CLK_AUX, 23=RADIO_PU_MAIN, 22=CORE_RDY_MAIN
 * 20=RADIO_PU_AUX, 18=CORE_RDY_AUX, 14=PWRSW_MAIN, 11=PWRSW_AUX
 */
#define GRP_PD_TRIGGER_MASK_4387	(0x60d44800u)

/* power down ch0=MAIN/AUX PHY_clk, ch2=MAIN/AUX MAC_clk, ch5=RFFE_clk */
#define GRP_PD_MASK_4387		(0x25u)

#define CC_GCI_CHIPCTRL_11_2x2_ANT_MASK		0x03
#define CC_GCI_CHIPCTRL_11_SHIFT_ANT_MASK	26

/* GCI chipstatus register indices */
#define GCI_CHIPSTATUS_00	(0)
#define GCI_CHIPSTATUS_01	(1)
#define GCI_CHIPSTATUS_02	(2)
#define GCI_CHIPSTATUS_03	(3)
#define GCI_CHIPSTATUS_04	(4)
#define GCI_CHIPSTATUS_05	(5)
#define GCI_CHIPSTATUS_06	(6)
#define GCI_CHIPSTATUS_07	(7)
#define GCI_CHIPSTATUS_08	(8)
#define GCI_CHIPSTATUS_09	(9)
#define GCI_CHIPSTATUS_10	(10)
#define GCI_CHIPSTATUS_11	(11)
#define GCI_CHIPSTATUS_12	(12)
#define GCI_CHIPSTATUS_13	(13)
#define GCI_CHIPSTATUS_15	(15)

/* 43021 GCI chipstatus registers */
#define GCI43012_CHIPSTATUS_07_BBPLL_LOCK_MASK	(1 << 3)

/* GCI Core Control Reg */
#define	GCI_CORECTRL_SR_MASK	(1 << 0)	/**< SECI block Reset */
#define	GCI_CORECTRL_RSL_MASK	(1 << 1)	/**< ResetSECILogic */
#define	GCI_CORECTRL_ES_MASK	(1 << 2)	/**< EnableSECI */
#define	GCI_CORECTRL_FSL_MASK	(1 << 3)	/**< Force SECI Out Low */
#define	GCI_CORECTRL_SOM_MASK	(7 << 4)	/**< SECI Op Mode */
#define	GCI_CORECTRL_US_MASK	(1 << 7)	/**< Update SECI */
#define	GCI_CORECTRL_BOS_MASK	(1 << 8)	/**< Break On Sleep */
#define	GCI_CORECTRL_FORCEREGCLK_MASK	(1 << 18)	/* ForceRegClk */

/* 4378 & 4387 GCI AVS function */
#define GCI6_AVS_ENAB			1u
#define GCI6_AVS_ENAB_SHIFT		31u
#define GCI6_AVS_ENAB_MASK		(1u << GCI6_AVS_ENAB_SHIFT)
#define GCI6_AVS_CBUCK_VOLT_SHIFT	25u
#define GCI6_AVS_CBUCK_VOLT_MASK	(0x1Fu << GCI6_AVS_CBUCK_VOLT_SHIFT)

/* GCI GPIO for function sel GCI-0/GCI-1 */
#define CC_GCI_GPIO_0			(0)
#define CC_GCI_GPIO_1			(1)
#define CC_GCI_GPIO_2			(2)
#define CC_GCI_GPIO_3			(3)
#define CC_GCI_GPIO_4			(4)
#define CC_GCI_GPIO_5			(5)
#define CC_GCI_GPIO_6			(6)
#define CC_GCI_GPIO_7			(7)
#define CC_GCI_GPIO_8			(8)
#define CC_GCI_GPIO_9			(9)
#define CC_GCI_GPIO_10			(10)
#define CC_GCI_GPIO_11			(11)
#define CC_GCI_GPIO_12			(12)
#define CC_GCI_GPIO_13			(13)
#define CC_GCI_GPIO_14			(14)
#define CC_GCI_GPIO_15			(15)

/* indicates Invalid GPIO, e.g. when PAD GPIO doesn't map to GCI GPIO */
#define CC_GCI_GPIO_INVALID		0xFF

/* 4378 LHL GPIO configuration */
#define	LHL_IOCFG_P_ADDR_LHL_GPIO_DOUT_SEL_SHIFT	(3u)
#define LHL_IOCFG_P_ADDR_LHL_GPIO_DOUT_SEL_MASK	(1u << LHL_IOCFG_P_ADDR_LHL_GPIO_DOUT_SEL_SHIFT)

/* 4378 LHL SPMI bit definitions */
#define LHL_LP_CTL5_SPMI_DATA_SEL_SHIFT		(8u)
#define	LHL_LP_CTL5_SPMI_DATA_SEL_MASK		(0x3u << LHL_LP_CTL5_SPMI_CLK_DATA_SHIFT)
#define LHL_LP_CTL5_SPMI_CLK_SEL_SHIFT		(6u)
#define	LHL_LP_CTL5_SPMI_CLK_SEL_MASK		(0x3u << LHL_LP_CTL5_SPMI_CLK_SEL_SHIFT)
#define	LHL_LP_CTL5_SPMI_CLK_DATA_GPIO0		(0u)
#define	LHL_LP_CTL5_SPMI_CLK_DATA_GPIO1		(1u)
#define	LHL_LP_CTL5_SPMI_CLK_DATA_GPIO2		(2u)

/* Plese do not these following defines */
/* find the 4 bit mask given the bit position */
#define GCIMASK(pos)  (((uint32)0xF) << pos)
/* get the value which can be used to directly OR with chipcontrol reg */
#define GCIPOSVAL(val, pos)  ((((uint32)val) << pos) & GCIMASK(pos))
/* Extract nibble from a given position */
#define GCIGETNBL(val, pos)	((val >> pos) & 0xF)

/* find the 8 bit mask given the bit position */
#define GCIMASK_8B(pos)  (((uint32)0xFF) << pos)
/* get the value which can be used to directly OR with chipcontrol reg */
#define GCIPOSVAL_8B(val, pos)  ((((uint32)val) << pos) & GCIMASK_8B(pos))
/* Extract nibble from a given position */
#define GCIGETNBL_8B(val, pos)	((val >> pos) & 0xFF)

/* find the 4 bit mask given the bit position */
#define GCIMASK_4B(pos)  (((uint32)0xF) << pos)
/* get the value which can be used to directly OR with chipcontrol reg */
#define GCIPOSVAL_4B(val, pos)  ((((uint32)val) << pos) & GCIMASK_4B(pos))
/* Extract nibble from a given position */
#define GCIGETNBL_4B(val, pos)	((val >> pos) & 0xF)

/* GCI Intstatus(Mask)/WakeMask Register bits. */
#define GCI_INTSTATUS_RBI	(1 << 0)	/**< Rx Break Interrupt */
#define GCI_INTSTATUS_UB	(1 << 1)	/**< UART Break Interrupt */
#define GCI_INTSTATUS_SPE	(1 << 2)	/**< SECI Parity Error Interrupt */
#define GCI_INTSTATUS_SFE	(1 << 3)	/**< SECI Framing Error Interrupt */
#define GCI_INTSTATUS_SRITI	(1 << 9)	/**< SECI Rx Idle Timer Interrupt */
#define GCI_INTSTATUS_STFF	(1 << 10)	/**< SECI Tx FIFO Full Interrupt */
#define GCI_INTSTATUS_STFAE	(1 << 11)	/**< SECI Tx FIFO Almost Empty Intr */
#define GCI_INTSTATUS_SRFAF	(1 << 12)	/**< SECI Rx FIFO Almost Full */
#define GCI_INTSTATUS_SRFNE	(1 << 14)	/**< SECI Rx FIFO Not Empty */
#define GCI_INTSTATUS_SRFOF	(1 << 15)	/**< SECI Rx FIFO Not Empty Timeout */
#define GCI_INTSTATUS_EVENT  (1 << 21)   /* GCI Event Interrupt */
#define GCI_INTSTATUS_LEVELWAKE (1 << 22)   /* GCI Wake Level Interrupt */
#define GCI_INTSTATUS_EVENTWAKE (1 << 23)   /* GCI Wake Event Interrupt */
#define GCI_INTSTATUS_GPIOINT	(1 << 25)	/**< GCIGpioInt */
#define GCI_INTSTATUS_GPIOWAKE	(1 << 26)	/**< GCIGpioWake */
#define GCI_INTSTATUS_LHLWLWAKE	(1 << 30)	/* LHL WL wake */

/* GCI IntMask Register bits. */
#define GCI_INTMASK_RBI		(1 << 0)	/**< Rx Break Interrupt */
#define GCI_INTMASK_UB		(1 << 1)	/**< UART Break Interrupt */
#define GCI_INTMASK_SPE		(1 << 2)	/**< SECI Parity Error Interrupt */
#define GCI_INTMASK_SFE		(1 << 3)	/**< SECI Framing Error Interrupt */
#define GCI_INTMASK_SRITI	(1 << 9)	/**< SECI Rx Idle Timer Interrupt */
#define GCI_INTMASK_STFF	(1 << 10)	/**< SECI Tx FIFO Full Interrupt */
#define GCI_INTMASK_STFAE	(1 << 11)	/**< SECI Tx FIFO Almost Empty Intr */
#define GCI_INTMASK_SRFAF	(1 << 12)	/**< SECI Rx FIFO Almost Full */
#define GCI_INTMASK_SRFNE	(1 << 14)	/**< SECI Rx FIFO Not Empty */
#define GCI_INTMASK_SRFOF	(1 << 15)	/**< SECI Rx FIFO Not Empty Timeout */
#define GCI_INTMASK_EVENT (1 << 21)   /* GCI Event Interrupt */
#define GCI_INTMASK_LEVELWAKE   (1 << 22)   /* GCI Wake Level Interrupt */
#define GCI_INTMASK_EVENTWAKE   (1 << 23)   /* GCI Wake Event Interrupt */
#define GCI_INTMASK_GPIOINT	(1 << 25)	/**< GCIGpioInt */
#define GCI_INTMASK_GPIOWAKE	(1 << 26)	/**< GCIGpioWake */
#define GCI_INTMASK_LHLWLWAKE	(1 << 30)	/* LHL WL wake */

/* GCI WakeMask Register bits. */
#define GCI_WAKEMASK_RBI	(1 << 0)	/**< Rx Break Interrupt */
#define GCI_WAKEMASK_UB		(1 << 1)	/**< UART Break Interrupt */
#define GCI_WAKEMASK_SPE	(1 << 2)	/**< SECI Parity Error Interrupt */
#define GCI_WAKEMASK_SFE	(1 << 3)	/**< SECI Framing Error Interrupt */
#define GCI_WAKE_SRITI		(1 << 9)	/**< SECI Rx Idle Timer Interrupt */
#define GCI_WAKEMASK_STFF	(1 << 10)	/**< SECI Tx FIFO Full Interrupt */
#define GCI_WAKEMASK_STFAE	(1 << 11)	/**< SECI Tx FIFO Almost Empty Intr */
#define GCI_WAKEMASK_SRFAF	(1 << 12)	/**< SECI Rx FIFO Almost Full */
#define GCI_WAKEMASK_SRFNE	(1 << 14)	/**< SECI Rx FIFO Not Empty */
#define GCI_WAKEMASK_SRFOF	(1 << 15)	/**< SECI Rx FIFO Not Empty Timeout */
#define GCI_WAKEMASK_EVENT   (1 << 21)   /* GCI Event Interrupt */
#define GCI_WAKEMASK_LEVELWAKE  (1 << 22)   /* GCI Wake Level Interrupt */
#define GCI_WAKEMASK_EVENTWAKE  (1 << 23)   /* GCI Wake Event Interrupt */
#define GCI_WAKEMASK_GPIOINT	(1 << 25)	/**< GCIGpioInt */
#define GCI_WAKEMASK_GPIOWAKE	(1 << 26)	/**< GCIGpioWake */
#define GCI_WAKEMASK_LHLWLWAKE	(1 << 30)	/* LHL WL wake */

#define	GCI_WAKE_ON_GCI_GPIO1	1
#define	GCI_WAKE_ON_GCI_GPIO2	2
#define	GCI_WAKE_ON_GCI_GPIO3	3
#define	GCI_WAKE_ON_GCI_GPIO4	4
#define	GCI_WAKE_ON_GCI_GPIO5	5
#define	GCI_WAKE_ON_GCI_GPIO6	6
#define	GCI_WAKE_ON_GCI_GPIO7	7
#define	GCI_WAKE_ON_GCI_GPIO8	8
#define	GCI_WAKE_ON_GCI_SECI_IN	9

#define	PMU_EXT_WAKE_MASK_0_SDIO		(1u << 2u)
#define	PMU_EXT_WAKE_MASK_0_PCIE_PERST		(1u << 5u)

#define PMU_4362_EXT_WAKE_MASK_0_SDIO		(1u << 1u | 1u << 2u)

/* =========== LHL regs =========== */
#define LHL_PWRSEQCTL_SLEEP_EN			(1 << 0)
#define LHL_PWRSEQCTL_PMU_SLEEP_MODE		(1 << 1)
#define LHL_PWRSEQCTL_PMU_FINAL_PMU_SLEEP_EN	(1 << 2)
#define LHL_PWRSEQCTL_PMU_TOP_ISO_EN		(1 << 3)
#define LHL_PWRSEQCTL_PMU_TOP_SLB_EN		(1 << 4)
#define LHL_PWRSEQCTL_PMU_TOP_PWRSW_EN		(1 << 5)
#define LHL_PWRSEQCTL_PMU_CLDO_PD		(1 << 6)
#define LHL_PWRSEQCTL_PMU_LPLDO_PD		(1 << 7)
#define LHL_PWRSEQCTL_PMU_RSRC6_EN		(1 << 8)

#define PMU_SLEEP_MODE_0	(LHL_PWRSEQCTL_SLEEP_EN |\
				LHL_PWRSEQCTL_PMU_FINAL_PMU_SLEEP_EN)

#define PMU_SLEEP_MODE_1	(LHL_PWRSEQCTL_SLEEP_EN |\
				  LHL_PWRSEQCTL_PMU_SLEEP_MODE |\
				  LHL_PWRSEQCTL_PMU_FINAL_PMU_SLEEP_EN |\
				  LHL_PWRSEQCTL_PMU_TOP_ISO_EN |\
				  LHL_PWRSEQCTL_PMU_TOP_SLB_EN |\
				  LHL_PWRSEQCTL_PMU_TOP_PWRSW_EN |\
				  LHL_PWRSEQCTL_PMU_CLDO_PD |\
				  LHL_PWRSEQCTL_PMU_RSRC6_EN)

#define PMU_SLEEP_MODE_2	(LHL_PWRSEQCTL_SLEEP_EN |\
				  LHL_PWRSEQCTL_PMU_SLEEP_MODE |\
				  LHL_PWRSEQCTL_PMU_FINAL_PMU_SLEEP_EN |\
				  LHL_PWRSEQCTL_PMU_TOP_ISO_EN |\
				  LHL_PWRSEQCTL_PMU_TOP_SLB_EN |\
				  LHL_PWRSEQCTL_PMU_TOP_PWRSW_EN |\
				  LHL_PWRSEQCTL_PMU_CLDO_PD |\
				  LHL_PWRSEQCTL_PMU_LPLDO_PD |\
				  LHL_PWRSEQCTL_PMU_RSRC6_EN)

#define LHL_PWRSEQ_CTL				(0x000000ff)

/* LHL Top Level Power Up Control Register (lhl_top_pwrup_ctl_adr, Offset 0xE78)
* Top Level Counter values for isolation, retention, Power Switch control
*/
#define LHL_PWRUP_ISOLATION_CNT			(0x6 << 8)
#define LHL_PWRUP_RETENTION_CNT			(0x5 << 16)
#define LHL_PWRUP_PWRSW_CNT			(0x7 << 24)
/* Mask is taken only for isolation 8:13 , Retention 16:21 ,
* Power Switch control 24:29
*/
#define LHL_PWRUP_CTL_MASK			(0x3F3F3F00)
#define LHL_PWRUP_CTL				(LHL_PWRUP_ISOLATION_CNT |\
						LHL_PWRUP_RETENTION_CNT |\
						LHL_PWRUP_PWRSW_CNT)

#define LHL_PWRUP2_CLDO_DN_CNT			(0x0)
#define LHL_PWRUP2_LPLDO_DN_CNT			(0x0 << 8)
#define LHL_PWRUP2_RSRC6_DN_CN			(0x4 << 16)
#define LHL_PWRUP2_RSRC7_DN_CN			(0x0 << 24)
#define LHL_PWRUP2_CTL_MASK			(0x3F3F3F3F)
#define LHL_PWRUP2_CTL				(LHL_PWRUP2_CLDO_DN_CNT |\
						LHL_PWRUP2_LPLDO_DN_CNT |\
						LHL_PWRUP2_RSRC6_DN_CN |\
						LHL_PWRUP2_RSRC7_DN_CN)

/* LHL Top Level Power Down Control Register (lhl_top_pwrdn_ctl_adr, Offset 0xE74) */
#define LHL_PWRDN_SLEEP_CNT			(0x4)
#define LHL_PWRDN_CTL_MASK			(0x3F)

/* LHL Top Level Power Down Control 2 Register (lhl_top_pwrdn2_ctl_adr, Offset 0xE80) */
#define LHL_PWRDN2_CLDO_DN_CNT			(0x4)
#define LHL_PWRDN2_LPLDO_DN_CNT			(0x4 << 8)
#define LHL_PWRDN2_RSRC6_DN_CN			(0x3 << 16)
#define LHL_PWRDN2_RSRC7_DN_CN			(0x0 << 24)
#define LHL_PWRDN2_CTL				(LHL_PWRDN2_CLDO_DN_CNT |\
						LHL_PWRDN2_LPLDO_DN_CNT |\
						LHL_PWRDN2_RSRC6_DN_CN |\
						LHL_PWRDN2_RSRC7_DN_CN)
#define LHL_PWRDN2_CTL_MASK			(0x3F3F3F3F)

#define LHL_FAST_WRITE_EN			(1 << 14)

#define LHL_WL_MACTIMER_MASK			0xFFFFFFFF
/* Write 1 to clear */
#define LHL_WL_MACTIMER_INT_ST_MASK		(0x1u)

/* WL ARM Timer0 Interrupt Mask (lhl_wl_armtim0_intrp_adr) */
#define LHL_WL_ARMTIM0_INTRP_EN			0x00000001
#define LHL_WL_ARMTIM0_INTRP_EDGE_TRIGGER	0x00000002

/* WL ARM Timer0 Interrupt Status (lhl_wl_armtim0_st_adr) */
#define LHL_WL_ARMTIM0_ST_WL_ARMTIM_INT_ST	0x00000001

/* WL MAC TimerX Interrupt Mask (lhl_wl_mactimX_intrp_adr) */
#define LHL_WL_MACTIM_INTRP_EN			0x00000001
#define LHL_WL_MACTIM_INTRP_EDGE_TRIGGER	0x00000002

/* WL MAC TimerX Interrupt Status (lhl_wl_mactimX_st_adr) */
#define LHL_WL_MACTIM_ST_WL_MACTIM_INT_ST	0x00000001

/* LHL Wakeup Status (lhl_wkup_status_adr) */
#define LHL_WKUP_STATUS_WR_PENDING_ARMTIM0	0x00100000

#define LHL_PS_MODE_0	0
#define LHL_PS_MODE_1	1

/* GCI EventIntMask Register SW bits */
#define GCI_MAILBOXDATA_TOWLAN	(1 << 0)
#define GCI_MAILBOXDATA_TOBT		(1 << 1)
#define GCI_MAILBOXDATA_TONFC		(1 << 2)
#define GCI_MAILBOXDATA_TOGPS		(1 << 3)
#define GCI_MAILBOXDATA_TOLTE		(1 << 4)
#define GCI_MAILBOXACK_TOWLAN		(1 << 8)
#define GCI_MAILBOXACK_TOBT		(1 << 9)
#define GCI_MAILBOXACK_TONFC		(1 << 10)
#define GCI_MAILBOXACK_TOGPS		(1 << 11)
#define GCI_MAILBOXACK_TOLTE		(1 << 12)
#define GCI_WAKE_TOWLAN				(1 << 16)
#define GCI_WAKE_TOBT				(1 << 17)
#define GCI_WAKE_TONFC				(1 << 18)
#define GCI_WAKE_TOGPS				(1 << 19)
#define GCI_WAKE_TOLTE				(1 << 20)
#define GCI_SWREADY					(1 << 24)

/* GCI SECI_OUT TX Status Regiser bits */
#define GCI_SECIOUT_TXSTATUS_TXHALT		(1 << 0)
#define GCI_SECIOUT_TXSTATUS_TI			(1 << 16)

/* 43012 MUX options */
#define MUXENAB43012_HOSTWAKE_MASK	(0x00000001)
#define MUXENAB43012_GETIX(val, name) (val - 1)

/*
* Maximum delay for the PMU state transition in us.
* This is an upper bound intended for spinwaits etc.
*/
#if defined(BCMQT) && defined(BCMDONGLEHOST)
#define PMU_MAX_TRANSITION_DLY	1500000
#else
#define PMU_MAX_TRANSITION_DLY	15000
#endif /* BCMDONGLEHOST */

/* PMU resource up transition time in ILP cycles */
#define PMURES_UP_TRANSITION	2

#if !defined(BCMDONGLEHOST)
/*
* Information from BT to WLAN over eci_inputlo, eci_inputmi &
* eci_inputhi register.  Rev >=21
*/
/* Fields in eci_inputlo register - [0:31] */
#define	ECI_INLO_TASKTYPE_MASK	0x0000000f /* [3:0] - 4 bits */
#define ECI_INLO_TASKTYPE_SHIFT 0
#define	ECI_INLO_PKTDUR_MASK	0x000000f0 /* [7:4] - 4 bits */
#define ECI_INLO_PKTDUR_SHIFT	4
#define	ECI_INLO_ROLE_MASK	0x00000100 /* [8] - 1 bits */
#define ECI_INLO_ROLE_SHIFT	8
#define	ECI_INLO_MLP_MASK	0x00000e00 /* [11:9] - 3 bits */
#define ECI_INLO_MLP_SHIFT	9
#define	ECI_INLO_TXPWR_MASK	0x000ff000 /* [19:12] - 8 bits */
#define ECI_INLO_TXPWR_SHIFT	12
#define	ECI_INLO_RSSI_MASK	0x0ff00000 /* [27:20] - 8 bits */
#define ECI_INLO_RSSI_SHIFT	20
#define	ECI_INLO_VAD_MASK	0x10000000 /* [28] - 1 bits */
#define ECI_INLO_VAD_SHIFT	28

/*
* Register eci_inputlo bitfield values.
* - BT packet type information bits [7:0]
*/
/*  [3:0] - Task (link) type */
#define BT_ACL				0x00
#define BT_SCO				0x01
#define BT_eSCO				0x02
#define BT_A2DP				0x03
#define BT_SNIFF			0x04
#define BT_PAGE_SCAN			0x05
#define BT_INQUIRY_SCAN			0x06
#define BT_PAGE				0x07
#define BT_INQUIRY			0x08
#define BT_MSS				0x09
#define BT_PARK				0x0a
#define BT_RSSISCAN			0x0b
#define BT_MD_ACL			0x0c
#define BT_MD_eSCO			0x0d
#define BT_SCAN_WITH_SCO_LINK		0x0e
#define BT_SCAN_WITHOUT_SCO_LINK	0x0f
/* [7:4] = packet duration code */
/* [8] - Master / Slave */
#define BT_MASTER			0
#define BT_SLAVE			1
/* [11:9] - multi-level priority */
#define BT_LOWEST_PRIO			0x0
#define BT_HIGHEST_PRIO			0x3
/* [19:12] - BT transmit power */
/* [27:20] - BT RSSI */
/* [28] - VAD silence */
/* [31:29] - Undefined */
/* Register eci_inputmi values - [32:63] - none defined */
/* [63:32] - Undefined */

/* Information from WLAN to BT over eci_output register. */
/* Fields in eci_output register - [0:31] */
#define ECI48_OUT_MASKMAGIC_HIWORD 0x55550000
#define ECI_OUT_CHANNEL_MASK(ccrev) ((ccrev) < 35 ? 0xf : (ECI48_OUT_MASKMAGIC_HIWORD | 0xf000))
#define ECI_OUT_CHANNEL_SHIFT(ccrev) ((ccrev) < 35 ? 0 : 12)
#define ECI_OUT_BW_MASK(ccrev) ((ccrev) < 35 ? 0x70 : (ECI48_OUT_MASKMAGIC_HIWORD | 0xe00))
#define ECI_OUT_BW_SHIFT(ccrev) ((ccrev) < 35 ? 4 : 9)
#define ECI_OUT_ANTENNA_MASK(ccrev) ((ccrev) < 35 ? 0x80 : (ECI48_OUT_MASKMAGIC_HIWORD | 0x100))
#define ECI_OUT_ANTENNA_SHIFT(ccrev) ((ccrev) < 35 ? 7 : 8)
#define ECI_OUT_SIMUL_TXRX_MASK(ccrev) \
	((ccrev) < 35 ? 0x10000 : (ECI48_OUT_MASKMAGIC_HIWORD | 0x80))
#define ECI_OUT_SIMUL_TXRX_SHIFT(ccrev) ((ccrev) < 35 ? 16 : 7)
#define ECI_OUT_FM_DISABLE_MASK(ccrev) \
	((ccrev) < 35 ? 0x40000 : (ECI48_OUT_MASKMAGIC_HIWORD | 0x40))
#define ECI_OUT_FM_DISABLE_SHIFT(ccrev) ((ccrev) < 35 ? 18 : 6)

/* Indicate control of ECI bits between s/w and dot11mac.
 * 0 => FW control, 1=> MAC/ucode control

 * Current assignment (ccrev >= 35):
 *  0 - TxConf (ucode)
 * 38 - FM disable (wl)
 * 39 - Allow sim rx (ucode)
 * 40 - Num antennas (wl)
 * 43:41 - WLAN channel exclusion BW (wl)
 * 47:44 - WLAN channel (wl)
 *
 * (ccrev < 35)
 * 15:0 - wl
 * 16 -
 * 18 - FM disable
 * 30 - wl interrupt
 * 31 - ucode interrupt
 * others - unassigned (presumed to be with dot11mac/ucode)
 */
#define ECI_MACCTRL_BITS	0xbffb0000
#define ECI_MACCTRLLO_BITS	0x1
#define ECI_MACCTRLHI_BITS	0xFF

#endif /* !defined(BCMDONGLEHOST) */

/* SECI Status (0x134) & Mask (0x138) bits - Rev 35 */
#define SECI_STAT_BI	(1 << 0)	/* Break Interrupt */
#define SECI_STAT_SPE	(1 << 1)	/* Parity Error */
#define SECI_STAT_SFE	(1 << 2)	/* Parity Error */
#define SECI_STAT_SDU	(1 << 3)	/* Data Updated */
#define SECI_STAT_SADU	(1 << 4)	/* Auxiliary Data Updated */
#define SECI_STAT_SAS	(1 << 6)	/* AUX State */
#define SECI_STAT_SAS2	(1 << 7)	/* AUX2 State */
#define SECI_STAT_SRITI	(1 << 8)	/* Idle Timer Interrupt */
#define SECI_STAT_STFF	(1 << 9)	/* Tx FIFO Full */
#define SECI_STAT_STFAE	(1 << 10)	/* Tx FIFO Almost Empty */
#define SECI_STAT_SRFE	(1 << 11)	/* Rx FIFO Empty */
#define SECI_STAT_SRFAF	(1 << 12)	/* Rx FIFO Almost Full */
#define SECI_STAT_SFCE	(1 << 13)	/* Flow Control Event */

/* SECI configuration */
#define SECI_MODE_UART			0x0
#define SECI_MODE_SECI			0x1
#define SECI_MODE_LEGACY_3WIRE_BT	0x2
#define SECI_MODE_LEGACY_3WIRE_WLAN	0x3
#define SECI_MODE_HALF_SECI		0x4

#define SECI_RESET		(1 << 0)
#define SECI_RESET_BAR_UART	(1 << 1)
#define SECI_ENAB_SECI_ECI	(1 << 2)
#define SECI_ENAB_SECIOUT_DIS	(1 << 3)
#define SECI_MODE_MASK		0x7
#define SECI_MODE_SHIFT		4 /* (bits 5, 6, 7) */
#define SECI_UPD_SECI		(1 << 7)

#define SECI_AUX_TX_START       (1 << 31)
#define SECI_SLIP_ESC_CHAR	0xDB
#define SECI_SIGNOFF_0		SECI_SLIP_ESC_CHAR
#define SECI_SIGNOFF_1     0
#define SECI_REFRESH_REQ	0xDA

/* seci clk_ctl_st bits */
#define CLKCTL_STS_HT_AVAIL_REQ		(1 << 4)
#define CLKCTL_STS_SECI_CLK_REQ		(1 << 8)
#define CLKCTL_STS_SECI_CLK_AVAIL	(1 << 24)

#define SECI_UART_MSR_CTS_STATE		(1 << 0)
#define SECI_UART_MSR_RTS_STATE		(1 << 1)
#define SECI_UART_SECI_IN_STATE		(1 << 2)
#define SECI_UART_SECI_IN2_STATE	(1 << 3)

/* GCI RX FIFO Control Register */
#define	GCI_RXF_LVL_MASK	(0xFF << 0)
#define	GCI_RXF_TIMEOUT_MASK	(0xFF << 8)

/* GCI UART Registers' Bit definitions */
/* Seci Fifo Level Register */
#define	SECI_TXF_LVL_MASK	(0x3F << 8)
#define	TXF_AE_LVL_DEFAULT	0x4
#define	SECI_RXF_LVL_FC_MASK	(0x3F << 16)

/* SeciUARTFCR Bit definitions */
#define	SECI_UART_FCR_RFR		(1 << 0)
#define	SECI_UART_FCR_TFR		(1 << 1)
#define	SECI_UART_FCR_SR		(1 << 2)
#define	SECI_UART_FCR_THP		(1 << 3)
#define	SECI_UART_FCR_AB		(1 << 4)
#define	SECI_UART_FCR_ATOE		(1 << 5)
#define	SECI_UART_FCR_ARTSOE		(1 << 6)
#define	SECI_UART_FCR_ABV		(1 << 7)
#define	SECI_UART_FCR_ALM		(1 << 8)

/* SECI UART LCR register bits */
#define SECI_UART_LCR_STOP_BITS		(1 << 0) /* 0 - 1bit, 1 - 2bits */
#define SECI_UART_LCR_PARITY_EN		(1 << 1)
#define SECI_UART_LCR_PARITY		(1 << 2) /* 0 - odd, 1 - even */
#define SECI_UART_LCR_RX_EN		(1 << 3)
#define SECI_UART_LCR_LBRK_CTRL		(1 << 4) /* 1 => SECI_OUT held low */
#define SECI_UART_LCR_TXO_EN		(1 << 5)
#define SECI_UART_LCR_RTSO_EN		(1 << 6)
#define SECI_UART_LCR_SLIPMODE_EN	(1 << 7)
#define SECI_UART_LCR_RXCRC_CHK		(1 << 8)
#define SECI_UART_LCR_TXCRC_INV		(1 << 9)
#define SECI_UART_LCR_TXCRC_LSBF	(1 << 10)
#define SECI_UART_LCR_TXCRC_EN		(1 << 11)
#define	SECI_UART_LCR_RXSYNC_EN		(1 << 12)

#define SECI_UART_MCR_TX_EN		(1 << 0)
#define SECI_UART_MCR_PRTS		(1 << 1)
#define SECI_UART_MCR_SWFLCTRL_EN	(1 << 2)
#define SECI_UART_MCR_HIGHRATE_EN	(1 << 3)
#define SECI_UART_MCR_LOOPBK_EN		(1 << 4)
#define SECI_UART_MCR_AUTO_RTS		(1 << 5)
#define SECI_UART_MCR_AUTO_TX_DIS	(1 << 6)
#define SECI_UART_MCR_BAUD_ADJ_EN	(1 << 7)
#define SECI_UART_MCR_XONOFF_RPT	(1 << 9)

/* SeciUARTLSR Bit Mask */
#define	SECI_UART_LSR_RXOVR_MASK	(1 << 0)
#define	SECI_UART_LSR_RFF_MASK		(1 << 1)
#define	SECI_UART_LSR_TFNE_MASK		(1 << 2)
#define	SECI_UART_LSR_TI_MASK		(1 << 3)
#define	SECI_UART_LSR_TPR_MASK		(1 << 4)
#define	SECI_UART_LSR_TXHALT_MASK	(1 << 5)

/* SeciUARTMSR Bit Mask */
#define	SECI_UART_MSR_CTSS_MASK		(1 << 0)
#define	SECI_UART_MSR_RTSS_MASK		(1 << 1)
#define	SECI_UART_MSR_SIS_MASK		(1 << 2)
#define	SECI_UART_MSR_SIS2_MASK		(1 << 3)

/* SeciUARTData Bits */
#define SECI_UART_DATA_RF_NOT_EMPTY_BIT	(1 << 12)
#define SECI_UART_DATA_RF_FULL_BIT	(1 << 13)
#define SECI_UART_DATA_RF_OVRFLOW_BIT	(1 << 14)
#define	SECI_UART_DATA_FIFO_PTR_MASK	0xFF
#define	SECI_UART_DATA_RF_RD_PTR_SHIFT	16
#define	SECI_UART_DATA_RF_WR_PTR_SHIFT	24

/* LTECX: ltecxmux */
#define LTECX_EXTRACT_MUX(val, idx)	(getbit4(&(val), (idx)))

/* LTECX: ltecxmux MODE */
#define LTECX_MUX_MODE_IDX		0
#define LTECX_MUX_MODE_WCI2		0x0
#define LTECX_MUX_MODE_GPIO		0x1

/* LTECX GPIO Information Index */
#define LTECX_NVRAM_FSYNC_IDX	0
#define LTECX_NVRAM_LTERX_IDX	1
#define LTECX_NVRAM_LTETX_IDX	2
#define LTECX_NVRAM_WLPRIO_IDX	3

/* LTECX WCI2 Information Index */
#define LTECX_NVRAM_WCI2IN_IDX	0
#define LTECX_NVRAM_WCI2OUT_IDX	1

/* LTECX: Macros to get GPIO/FNSEL/GCIGPIO */
#define LTECX_EXTRACT_PADNUM(val, idx)	(getbit8(&(val), (idx)))
#define LTECX_EXTRACT_FNSEL(val, idx)	(getbit4(&(val), (idx)))
#define LTECX_EXTRACT_GCIGPIO(val, idx)	(getbit4(&(val), (idx)))

/* WLAN channel numbers - used from wifi.h */

/* WLAN BW */
#define ECI_BW_20   0x0
#define ECI_BW_25   0x1
#define ECI_BW_30   0x2
#define ECI_BW_35   0x3
#define ECI_BW_40   0x4
#define ECI_BW_45   0x5
#define ECI_BW_50   0x6
#define ECI_BW_ALL  0x7

/* WLAN - number of antenna */
#define WLAN_NUM_ANT1 TXANT_0
#define WLAN_NUM_ANT2 TXANT_1

/* otpctrl1 0xF4 */
#define OTPC_FORCE_PWR_OFF	0x02000000
/* chipcommon s/r registers introduced with cc rev >= 48 */
#define CC_SR_CTL0_ENABLE_MASK             0x1
#define CC_SR_CTL0_ENABLE_SHIFT              0
#define CC_SR_CTL0_EN_SR_ENG_CLK_SHIFT       1 /* sr_clk to sr_memory enable */
#define CC_SR_CTL0_RSRC_TRIGGER_SHIFT        2 /* Rising edge resource trigger 0 to sr_engine  */
#define CC_SR_CTL0_MIN_DIV_SHIFT             6 /* Min division value for fast clk in sr_engine */
#define CC_SR_CTL0_EN_SBC_STBY_SHIFT        16 /* Allow Subcore mem StandBy? */
#define CC_SR_CTL0_EN_SR_ALP_CLK_MASK_SHIFT 18
#define CC_SR_CTL0_EN_SR_HT_CLK_SHIFT       19
#define CC_SR_CTL0_ALLOW_PIC_SHIFT          20 /* Allow pic to separate power domains */
#define CC_SR_CTL0_MAX_SR_LQ_CLK_CNT_SHIFT  25
#define CC_SR_CTL0_EN_MEM_DISABLE_FOR_SLEEP 30

#define CC_SR_CTL1_SR_INIT_MASK             0x3FF
#define CC_SR_CTL1_SR_INIT_SHIFT            0

#define	ECI_INLO_PKTDUR_MASK	0x000000f0 /* [7:4] - 4 bits */
#define ECI_INLO_PKTDUR_SHIFT	4

/* gci chip control bits */
#define GCI_GPIO_CHIPCTRL_ENAB_IN_BIT		0
#define GCI_GPIO_CHIPCTRL_ENAB_OP_BIT		1
#define GCI_GPIO_CHIPCTRL_INVERT_BIT		2
#define GCI_GPIO_CHIPCTRL_PULLUP_BIT		3
#define GCI_GPIO_CHIPCTRL_PULLDN_BIT		4
#define GCI_GPIO_CHIPCTRL_ENAB_BTSIG_BIT	5
#define GCI_GPIO_CHIPCTRL_ENAB_OD_OP_BIT	6
#define GCI_GPIO_CHIPCTRL_ENAB_EXT_GPIO_BIT	7

/* gci GPIO input status bits */
#define GCI_GPIO_STS_VALUE_BIT			0
#define GCI_GPIO_STS_POS_EDGE_BIT		1
#define GCI_GPIO_STS_NEG_EDGE_BIT		2
#define GCI_GPIO_STS_FAST_EDGE_BIT		3
#define GCI_GPIO_STS_CLEAR			0xF

#define GCI_GPIO_STS_EDGE_TRIG_BIT			0
#define GCI_GPIO_STS_NEG_EDGE_TRIG_BIT		1
#define GCI_GPIO_STS_DUAL_EDGE_TRIG_BIT		2
#define GCI_GPIO_STS_WL_DIN_SELECT		6

#define GCI_GPIO_STS_VALUE	(1 << GCI_GPIO_STS_VALUE_BIT)

/* SR Power Control */
#define SRPWR_DMN0_PCIE			(0)				/* PCIE */
#define SRPWR_DMN0_PCIE_SHIFT		(SRPWR_DMN0_PCIE)		/* PCIE */
#define SRPWR_DMN0_PCIE_MASK		(1 << SRPWR_DMN0_PCIE_SHIFT)	/* PCIE */
#define SRPWR_DMN1_ARMBPSD		(1)				/* ARM/BP/SDIO */
#define SRPWR_DMN1_ARMBPSD_SHIFT	(SRPWR_DMN1_ARMBPSD)		/* ARM/BP/SDIO */
#define SRPWR_DMN1_ARMBPSD_MASK		(1 << SRPWR_DMN1_ARMBPSD_SHIFT)	/* ARM/BP/SDIO */
#define SRPWR_DMN2_MACAUX		(2)				/* MAC/Phy Aux */
#define SRPWR_DMN2_MACAUX_SHIFT		(SRPWR_DMN2_MACAUX)		/* MAC/Phy Aux */
#define SRPWR_DMN2_MACAUX_MASK		(1 << SRPWR_DMN2_MACAUX_SHIFT)	/* MAC/Phy Aux */
#define SRPWR_DMN3_MACMAIN		(3)				/* MAC/Phy Main */
#define SRPWR_DMN3_MACMAIN_SHIFT	(SRPWR_DMN3_MACMAIN)		/* MAC/Phy Main */
#define SRPWR_DMN3_MACMAIN_MASK		(1 << SRPWR_DMN3_MACMAIN_SHIFT)	/* MAC/Phy Main */

#define SRPWR_DMN4_MACSCAN		(4)				/* MAC/Phy Scan */
#define SRPWR_DMN4_MACSCAN_SHIFT	(SRPWR_DMN4_MACSCAN)		/* MAC/Phy Scan */
#define SRPWR_DMN4_MACSCAN_MASK		(1 << SRPWR_DMN4_MACSCAN_SHIFT)	/* MAC/Phy Scan */

#define SRPWR_DMN_MAX		(5)
/* all power domain mask */
#define SRPWR_DMN_ALL_MASK(sih)		si_srpwr_domain_all_mask(sih)

#define SRPWR_REQON_SHIFT		(8)	/* PowerOnRequest[11:8] */
#define SRPWR_REQON_MASK(sih)		(SRPWR_DMN_ALL_MASK(sih) << SRPWR_REQON_SHIFT)

#define SRPWR_STATUS_SHIFT		(16)	/* ExtPwrStatus[19:16], RO */
#define SRPWR_STATUS_MASK(sih)		(SRPWR_DMN_ALL_MASK(sih) << SRPWR_STATUS_SHIFT)

#define SRPWR_BT_STATUS_SHIFT		(20)	/* PowerDomain[20:21], RO */
#define SRPWR_BT_STATUS_MASK		(0x3)

#define SRPWR_DMN_ID_SHIFT		(28)	/* PowerDomain[31:28], RO */
#define SRPWR_DMN_ID_MASK		(0xF)

#define SRPWR_UP_DOWN_DELAY		100	/* more than 3 ILP clocks */

/* PMU Precision Usec Timer */
#define PMU_PREC_USEC_TIMER_ENABLE	0x1

/* Random Number/Bit Generator defines */
#define	MASK_1BIT(offset)			(0x1u << offset)

#define	CC_RNG_CTRL_0_RBG_EN_SHIFT		(0u)
#define	CC_RNG_CTRL_0_RBG_EN_MASK		(0x1FFFu << CC_RNG_CTRL_0_RBG_EN_SHIFT)
#define	CC_RNG_CTRL_0_RBG_EN			(0x1FFFu)
#define CC_RNG_CTRL_0_RBG_DEV_CTRL_SHIFT	(12u)
#define CC_RNG_CTRL_0_RBG_DEV_CTRL_MASK		(0x3u << CC_RNG_CTRL_0_RBG_DEV_CTRL_SHIFT)
#define CC_RNG_CTRL_0_RBG_DEV_CTRL_1MHz		(0x3u << CC_RNG_CTRL_0_RBG_DEV_CTRL_SHIFT)
#define CC_RNG_CTRL_0_RBG_DEV_CTRL_2MHz		(0x2u << CC_RNG_CTRL_0_RBG_DEV_CTRL_SHIFT)
#define CC_RNG_CTRL_0_RBG_DEV_CTRL_4MHz		(0x1u << CC_RNG_CTRL_0_RBG_DEV_CTRL_SHIFT)
#define CC_RNG_CTRL_0_RBG_DEV_CTRL_8MHz		(0x0u << CC_RNG_CTRL_0_RBG_DEV_CTRL_SHIFT)

/* RNG_FIFO_COUNT */
/* RFC - RNG FIFO COUNT */
#define CC_RNG_FIFO_COUNT_RFC_SHIFT		(0u)
#define CC_RNG_FIFO_COUNT_RFC_MASK		(0xFFu << CC_RNG_FIFO_COUNT_RFC_SHIFT)

/* RNG interrupt */
#define CC_RNG_TOT_BITS_CNT_IRQ_SHIFT		(0u)
#define CC_RNG_TOT_BITS_CNT_IRQ_MASK		(0x1u << CC_RNG_TOT_BITS_CNT_IRQ_SHIFT)
#define CC_RNG_TOT_BITS_MAX_IRQ_SHIFT		(1u)
#define CC_RNG_TOT_BITS_MAX_IRQ_MASK		(0x1u << CC_RNG_TOT_BITS_MAX_IRQ_SHIFT)
#define CC_RNG_FIFO_FULL_IRQ_SHIFT		(2u)
#define CC_RNG_FIFO_FULL_IRQ_MASK		(0x1u << CC_RNG_FIFO_FULL_IRQ_SHIFT)
#define CC_RNG_FIFO_OVER_RUN_IRQ_SHIFT		(3u)
#define CC_RNG_FIFO_OVER_RUN_IRQ_MASK		(0x1u << CC_RNG_FIFO_OVER_RUN_IRQ_SHIFT)
#define CC_RNG_FIFO_UNDER_RUN_IRQ_SHIFT		(4u)
#define CC_RNG_FIFO_UNDER_RUN_IRQ_MASK		(0x1u << CC_RNG_FIFO_UNDER_RUN_IRQ_SHIFT)
#define CC_RNG_NIST_FAIL_IRQ_SHIFT		(5u)
#define CC_RNG_NIST_FAIL_IRQ_MASK		(0x1u << CC_RNG_NIST_FAIL_IRQ_SHIFT)
#define	CC_RNG_STARTUP_TRANSITION_MET_IRQ_SHIFT	(17u)
#define	CC_RNG_STARTUP_TRANSITION_MET_IRQ_MASK	(0x1u << \
						CC_RNG_STARTUP_TRANSITION_MET_IRQ_SHIFT)
#define	CC_RNG_MASTER_FAIL_LOCKOUT_IRQ_SHIFT	(31u)
#define	CC_RNG_MASTER_FAIL_LOCKOUT_IRQ_MASK	(0x1u << \
						CC_RNG_MASTER_FAIL_LOCKOUT_IRQ_SHIFT)

/* FISCtrlStatus */
#define PMU_CLEAR_FIS_DONE_SHIFT	1u
#define PMU_CLEAR_FIS_DONE_MASK	(1u << PMU_CLEAR_FIS_DONE_SHIFT)

#define PMU_FIS_FORCEON_ALL_SHIFT	4u
#define PMU_FIS_FORCEON_ALL_MASK	(1u << PMU_FIS_FORCEON_ALL_SHIFT)

#define PMU_FIS_DN_TIMER_VAL_SHIFT	16u
#define PMU_FIS_DN_TIMER_VAL_MASK	0x7FFF0000u

#define PMU_FIS_DN_TIMER_VAL_4378	0x2f80u	/* micro second */
#define PMU_FIS_DN_TIMER_VAL_4388	0x3f80u	/* micro second */
#define PMU_FIS_DN_TIMER_VAL_4389	0x3f80u	/* micro second */

#define PMU_FIS_PCIE_SAVE_EN_SHIFT	5u
#define PMU_FIS_PCIE_SAVE_EN_VALUE	(1u << PMU_FIS_PCIE_SAVE_EN_SHIFT)

#define PMU_REG6_RFLDO_CTRL              0x000000E0
#define PMU_REG6_RFLDO_CTRL_SHFT         5

#define PMU_REG6_BTLDO_CTRL              0x0000E000
#define PMU_REG6_BTLDO_CTRL_SHFT         13

/* ETBMemCtrl */
#define CC_ETBMEMCTRL_FORCETMCINTFTOETB_SHIFT	1u
#define CC_ETBMEMCTRL_FORCETMCINTFTOETB_MASK	(1u << CC_ETBMEMCTRL_FORCETMCINTFTOETB_SHIFT)

/* SSSR dumps locations on the backplane space */
#define BCM4387_SSSR_DUMP_AXI_MAIN		0xE8C00000u
#define BCM4387_SSSR_DUMP_MAIN_SIZE		160000u
#define BCM4387_SSSR_DUMP_AXI_AUX		0xE8400000u
#define BCM4387_SSSR_DUMP_AUX_SIZE		160000u
#define BCM4387_SSSR_DUMP_AXI_SCAN		0xE9400000u
#define BCM4387_SSSR_DUMP_SCAN_SIZE		32768u

#endif	/* _SBCHIPC_H */