l t x t x dhd_coredump dhd_upload bsscfg: %s: %s 1.363.77.0 (TOB) (r570264-20190331-1) SCR SHM DEBUG: %s: Indirect: write 0x%08x, size %d, value 0x%08x sbreg DEBUG: %s: Indirect: Read 0x%08x, size %d, value 0x%08x DEBUG: %s: Indirect: Read 0x%08x, size %d, value 0x%04x ihr scr shm DEBUG: IHR32: read 0x%08x, size %d, value 0x%08x %-3d %s 0x%-4x = 0x%-8x DEBUG: IHR16: read 0x%08x, size %d, value 0x%08x Unrecognized type %d! %-3d %s 0x%-4x = 0x%-4x shmx ihrx ihr32 Invalid selection!! Invalid option!! Invalid argument %s!! Invalid val %d!! DEBUG: SHM SIZE: read 0x%08x, size %d, value 0x%08x Read_Link_Quality Read_Local_AMP_Info Read_Local_AMP_ASSOC Write_Remote_AMP_ASSOC Create_Physical_Link Accept_Physical_Link_Request Disconnect_Physical_Link Create_Logical_Link Accept_Logical_Link Disconnect_Logical_Link Logical_Link_Cancel Short_Range_Mode Read_Connection_Accept_Timeout Write_Connection_Accept_Timeout Read_Link_Supervision_Timeout Write_Link_Supervision_Timeout Reset Enhanced_Flush Read_Best_Effort_Flush_Timeout Write_Best_Effort_Flush_Timeout Read_Logical_Link_Accept_Timeout Write_Logical_Link_Accept_Timeout Read_Buffer_Size Read_Data_Block_Size Set_Event_Mask_Page_2 Flow_Spec_Modify Read_Local_Version_Info Read_Local_Supported_Commands Read_Failed_Contact_Counter Reset_Failed_Contact_Counter unsupported HCI command: %s required args: function [size] (size 0 means max) Invalid function: %s Invalid size: %s Function %d block size: %d Setting function %d block size to %d bad val1: %s bad val2: %s error getting reorder flows from the host there are no active flows flows(%d): %d 0x%x r w required args: r|w size set not defined for %s set: missing arguments set: missing value argument for set of "%s" set: error parsing value "%s" as an integer for set of "%s" sd_hostreg required args: offset [value] sd_devreg required args: func offset [value] Invalid function number Invalid offset value Invalid value Looopback test failed. Looopback test passed. required args: offset[/size] [value] Bad arg: %s Bad size option? Defaulting to register size 4 Bad value: %s 0x%0*x rb Could not determine size of %s: %s sprom srdump Command srdump doesn't take args srwrite Unimplemented sprom command: %s -c Bad file size Could not open %s: %s Could not read %d bytes from %s CRC check failed: 0x%02x, should be 0x%02x. offset %s is not an integer value %s is not an integer max of %d words srom[%03d]: 0x%04x Failed to allocate buffer of %d bytes get: missing arguments get: error, extra arg "%s" SD1 SPI Unknown SD4 spi 0 sd1 1 sd4 2 SD Mode is: %s SDMA PIO ADMA1 ADMA2 pio dma sdma adma1 adma 3 adma2 DMA Mode is: %s ramstart %s: error obtaining ramstart Error: cannot find pointer to debug_info membytes Error: Debug info pointer is zero %s: failed reading %lu membytes from 0x%08lx Error: Invalid debug info area download download options error extra positional arg, %s unrecognized option %c filename required %s: file %s too large (%d > %d) %s: unable to open %s: %s %s: error reading file %s %s: error %d on writing %d membytes at 0x%08x active stopped invalid number %s Idleclock %d (active) Idleclock %d (stopped) Idleclock divisor %d idleclock never immediate immed invalid value %s idletime 0 (never) -1 (immediate) %d %d (invalid) get not defined for %s %d (0x%x) ramsize upload upload options error invalid address %s unrecognized option %s %s: error obtaining ramsize wb %s: Could not open %s: %s %s: failed reading %d membytes from 0x%08x %s: error writing to file %s echo send recv burst UNKNOWN , pktgen pktgen version mismatch (module %d app %d) pktgen options error invalid integer %s unrecognized dir mode %s option parsing error (key %s valstr %s) min/max error (%d/%d) Counts: %d send attempts, %d received, %d tx failures Config: mode %s %d pkts (len %d-%d) each %d ticks %slimit %d %sprint every %d ticks %sstop after %d tx failures dump dump options error Dump starts for version %s FWID 01-%x XXXXXXXXXXXXXXXXXXXX %8.8lX %8.8X consoledump %s: console not found %s: console not initialised %s: console buffer not initialised %s %s: error reading file 0x%x: exp[0x%02X] != got[0x%02X] %s: verify failed %d membytes from 0x%08x NVRAM file %s (%d bytes) too long for %d bytes buffer Cannot open NVRAM file %s: %s vars noreset norun verify dongle RAM Image size %d dongle ROM Image size %d dongle ROM Loadaddr 0x%x bustype %s: error obtaining bustype %s: error obtaining memsize %s: Failed to allocate memory %d bytes %s: error setting ramsize Adjust dongle ram size to 0x%x dwnldstate %s: failed to put dongle in download mode %s: ftell failed. %s: error loading the ramimage at addr 0x%x %s: error loading the romlibrary at addr 0x%x %s: error %d on delivering vars %s: failed to take dongle out of download mode %s: CPU is not in RUNNABLE State %s: Error in setting CPU to RUN mode. ucode & initvals download has failed proptx_opt: %d proptxstatusmode: %d proptxstatus: %d write protect[0/1] should be specified: socdevram dhd socdevram set error dhd socdevram get error socdevram: enable %d, write_protect: %d remap: %d 0x%x %s 0x%04x %s , %s msg values may be a list of numbers or names from the following set. Use a + or - prefix to make an incremental change. -a -i error: expected interface name after option %s -d -u -x -h %s %s %s %s Usage: %s [-a|i <adapter>] [-h] [-d|u|x] <command> [arguments] -h this message -a, -i adapter name or number -d display values as signed integer -u display values as unsigned integer -x display values as hexdecimal Version mismatch, please upgrade %u %08x: %02x %c rh membytes options error membytes command error required args: address size [<data>] missing <data> required by -h can't have <data> arg with -r Can only write starting at long-aligned addresses. Hex (-h) must consist of whole bytes invalid hex digit %c bcmerrorstr %s: Error getting the last error on off error err trace inform info inf data ctl timer hdrs bytes intr log glom event bta iscan arpoe reorder firmwareLog control var unrecognized name, type -h for help cmds generate a short list of available commands version get version information lmtest get/set low memory test flag wlmsglevel get/set message bits msglevel errorstring wdtick watchdog tick time (ms units) msi_sim simulate MSI interrupts for the PCIE full dongle operation pcie_lpbk send a loopback message on the bus pcie_dmaxfer send a dma transfer message on the bus pcie_tx_lpbk enable/disable loopback of tx packets on the bus pcie_suspend suspend/resume pcie bus oob_bt_reg_on get/set level of BT_REG_ON pin oob_enable Enable OOB DEVICE_WAKE functionality pciereg get/set a pciereg from the device bar0secwinreg g/set any backplane address across BAR0 pciecorereg get/set a pciecorereg from the device pcieserdesreg get/set a pcieserdesreg from the device. first param is the block adress. second is the register offset, third is value of reg pciecfgreg get/set a pciecfgreg from the device sleep_allowed boolean to indicate whether the device is allowed to go to deep sleep cc_nvmshadow dump OTP/SPROM shadow in chip common enum space dump_ringupdblk dump ring update block in dhd memory dma_ring_indices allow dmaing write/read indices from dongle to host memory use interrupts on the bus pollrate number of ticks between bus polls (0 means no polling) number of ticks for activity timeout (-1: immediate, 0: never) idlecount current count of activity timeout idleclock active | stopped | <N> active (0) - do not request any change to the SD clock stopped (-1) - request SD clock be stopped on activity timeout <N> (other) - an sd_divisor value to request on activity timeout sd1idle change mode to SD1 when turning off clock at idle forceeven force SD tx/rx buffers to be even readahead enable readahead feature (look for next frame len in headers) sdrxchain enable packet chains to SDIO stack for glom receive alignctl align control frames sdalign display the (compiled in) alignment target for sd requests txbound get/set maximum number of tx frames per scheduling rxbound get/set maximum number of rx frames per scheduling txminmax get/set maximum number of tx frames per scheduling while rx frames outstanding dconpoll g/set dongle console polling interval (ms) dump information cons send string to device console (sd only) clearcounts reset the bus stats shown in the dhd dump logdump dump the timestamp logging buffer logcal logcal <n> -- log around an osl_delay of <n> usecs logstamp logstamp [<n1>] [<n2>] -- add a message to the log display start address of onchip SOCRAM display size of onchip SOCRAM checkdied Display trap or assert from dongle usb_lb_txfer usb_lb_txfer <cnt> <size> send cnt usb looback packets of size equal to len on the bus membytes [-h | -r | -i] <address> <length> [<data>] read or write data in the dongle ram -h <data> is a sequence of hex digits rather than a char string -r output binary to stdout rather hex buzzz_dump buzzz_dump download [-a <address>] [--noreset] [--norun] [--verify] <binfile> [<varsfile>] download file to specified dongle ram address and start CPU optional vars file will replace vars parsed from the CIS --noreset do not reset SOCRAM core before download --norun do not start dongle CPU after download --verify do readback verify default <address> is 0 dldn download <binfile> download file to specified dongle ram address 0 vars [<file>] override SPROM vars with <file> (before download) coredump coredump <file> dump dongle RAM content into a file in dumpfile format for use with ELF core generator consoledump dump dongle debug console buffer upload [-a <address> ] <file> [<size>] upload dongle RAM content into a file default <address> is 0, default <size> is RAM size display SPROM content write data or file content to SPROM srwrite <word-offset> <word-value> ... srwrite [-c] <srom-file-path> -c means write regardless of crc sleep enter/exit simulated host sleep (bus powerdown w/OOB wakeup) kso keep sdio on devcap brcm device capabilities devsleep Sleep CMD14 extloop external loopback: convert all tx data to echo test frames configure/report pktgen status (SDIO) -f N frequency: send/recv a burst every N ticks -c N count: send/recv N packets each burst -t N total: stop after a total of N packets -p N print: display counts on console every N bursts -m N min: set minimum length of packet data -M N Max: set maximum length of packet data -l N len: set fixed length of packet data -s N stop after N tx failures -d dir test direction/type: send -- send packets discarded by dongle echo -- send packets to be echoed by dongle burst -- request bursts (of size <-c>) from dongle one every <-f> ticks, until <-t> total requests recv -- request dongle enter continuous send mode, read up to <-c> pkts every <-f> ticks until <-t> total reads sdf2 read/write an F2 buffer sdreset do an sdio reset and reinitialization of the device sdabort cpu get/set dongle CPU state (1/on, or 0/off) watermark setting for watermark (in 4-byte words) firstread bytes for initial header read (8 thru 32) tstoph test: stop host on header read failure retrydata request tx and rx retries for data channel checkfifo display fifo content on next rx interrupt clockpoll force polling for backplane clock availability maxsocram g/set scoramsize siregall get siregall serial enable serial make the mux do serial instead of JTAG socdevram_pkg socdevram_size socdevram_remap socdevram_remap (1: enab 0: disb) socdevram enable(1: enable, 0: disable) writeprotect(1: on 0:off) remap(1: enab 0: disb) mesbusyctrl setting for mesbusyctrl (in 4-byte words) dngl_isolation g/set dongle isolation, so the dev could be disabled with out effecting the dongle state ltrsleep_on_unload g/set sending ltr sleep message on unload config sdreg g/set sdpcmdev core register (f1) across SDIO (CMD53) g/set any backplane core register (f1) across SDIO (CMD53) sd_cis dump sdio CIS g/set device register across SDIO bus (CMD52) g/set local controller register sd_blocksize g/set block size for a function sd_blockmode g/set blockmode sd_ints g/set client ints sd_dma g/set dma usage: [PIO | SDMA | ADMA1 | ADMA2] sd_yieldcpu allow blocking (yield of CPU) on data xfer sd_minyield minimum xfer size to allow CPU yield sd_forcerb force readback when changing local interrupt settings sd_numints number of device interrupts sd_numlocalints number of non-device interrupts sd_divisor set the divisor for SDIO clock generation sd_power set the SD Card slot power sd_power_save set the SDIO3.0 power save value sd_clock turn on/off the SD Clock sd_crc turn on/off CRC checking in SPI mode sd_mode g/set SDIO bus mode (spi, sd1, sd4) sd_highspeed set the high-speed clocking mode sd_msglevel g/set debug message level sd_hciregs display host-controller interrupt registers sdiod_drive SDIO Device drive strength in milliamps. (0=tri-state, 1-12mA) devreset Move device into or out of reset state (1/reset, or 0/operational) ioctl_timeout IOCTL response timeout (milliseconds). HCI_cmd carries HCI commands to the driver usage: dhd HCI_cmd <command> <args> HCI_ACL_data carries HCI ACL data packet to the driver usage: dhd HCI_ACL_data <logical link handle> <data> proptx enable/disable the proptxtstatus feature 0 - disabled 1 - enabled ptxmode set the proptxtstatus operation mode: 0 - Unsupported 1 - Use implied credit from a packet status 2 - Use explicit credit proptx_opt enable/disable proptxtstatus optimizations to increase throughput: 0 - Unsupported 1 - Enable proptxstatus optimizations to increase throughput pmodule_ignore use/bypass the proptxtstatus module 0 - apply 1 - bypass pcredit_ignore apply/ignore the proptxtstatus credit control 0 - apply 1 - ignore ptxstatus_ignore process/ignore the proptxtstatus txstaus 0 - process 1 - ignore rxpkt_chk check/ignore rx packet for multiple AC detection 0 - ignore 1 - check sd_uhsimode g/set UHSI Mode host_reorder_flows get host reorder flows txglomsize max glom size for sdio tx txp_thresh max txp glom to flush to device on PCIE Tx txglommode glom mode for sdio tx 0- copy, 1- multidescriptor fw_hang_report enable/disable report firmware hangs for firmware reload 0 - disabled (for testing) 1 - enabled (default) tuning_mode get/set tuning mode 1 - Disabled periodic tuning 0 - Enable periodic tuning tcpack_suppress Turn tcpack_suppress on/off 0 - off 1 - on txinrx_thres get/set threshold for num of in-queued pkts to tx in rx process 0 - always send out in rx process num - amount of in-queued pkts db1_for_mb get/set doorbell1 option for Mail box interrupt, for PCIE FD0 - use default config write for mb interrupt 1 - use enumeration doorbell1 write for mb interrupt flow_prio_map 0 - Default AC priority map 1 - TID based priority map op_mode get/set operation mode when cfg80211 is used 1- STA Only 2- SOFT AP Only 3- P2P Only 4- STA + P2P assert_type set/get the asset_bypass flag assert_type <1/0> (On/Off) wowl_wakeind get wowl wake reason WAKE_EVENT_NLO_DISCOVERY_BIT 0x0001 WAKE_EVENT_AP_ASSOCIATION_LOST_BIT 0x0002 WAKE_EVENT_GTK_HANDSHAKE_ERROR_BIT 0x0004 WAKE_EVENT_4WAY_HANDSHAKE_REQUEST_BIT 0x0008 WAKE_EVENT_NET_PAKCET_BIT 0x0010 UNSPECIFIED (dhd not the wake reason) 0x0000 wmf_bss_enable enable/disable wmf features wmf_psta_disable disable/enable wmf for proxy sta wmf_ucast_igmp enable/disable wmf unicast igmp features wmf_mcast_data_sendup enable/disable wmf multicast data sendup wmf_ucast_upnp enable/disable wmf unicast upnp features ap_isolate set/get AP isolation proxy_arp enable/disable proxy arp features dhcp_unicast enable/disable dhcp unicast features block_ping enable/disable block ping features grat_arp enable/disable grat arp features dev_def set/get dev_def pmac Get mac obj values such as of SHM and IHR usage: dhd -i IF pmac <type> <address> -s <step size> -n <num> -b <bitmap> <step size> = 0 or 2 or 4 <num> : how many to print <bitmap> : 32-bit value wifiaction rwlwifivsaction %s: socket : ? /proc/net/dev sh Enter the shell command (e.g ls(Linux) or dir(Win CE) dhd dhd_check %s: Unrecognized command "%s", type -h for help /dev/hnd0 devnode already opened! --wince --socket --dongle serial device open error --wifi wl %s: wl driver adapter not found could not parse as an ethernet MAC address Retry again 0123456789 Error at inet_ntoa Error in IP address Enter correct IP address/hostname format generic_dload ucode initvals ucdload_chunk_len err in getting ucode chunk len, exiting error while writing %s to the memory Unable to allocate %d bytes! Short read in hdr read for %s! Error: trx bad hdr not a valid ucode.trx ucdload_status err in ucdload_status, exiting ucode is already downloaded error while downloading ucode, exiting error while downloading initvals, exiting wl device is not present -- %s: missing " = " in long param "%s" %s: missing value after " = " in long param "%s" %s: only single char options, error on param "%s" %s: missing value parameter after "%s" rem_ptr->msg.len=%d rem_ptr->data_len=%d data_len is:%d No of frames=%d Malloc failed for serial fragmented framelocal result Total bytes=%d Frame (Reverse):%d query_info_fe: Reading CDC header failed query_info_fe: Send command failed query_info_fe: Reading CDC header failed query_info_fe: needed size(%d) > actualsize(%ld) query_info_fe: No results! ServerIP:%s,ServerPort:%d Error in getting the Socket Descriptor query_info_fe: Reading CDC header failed query_info_fe: needed size(%d) > actual size(%ld) Mem alloc fails for shell cmd buffer Insufficient length for shell cmd buffer Error in getting the SocDes shell_info_fe: Send command failed kill rwl_socket_shellresp: Receiving CDCheader failed rwl_socket_shellresp: Mem alloc fails rwl_socket_shellresp: No results! shell_info_fe: Receiving CDCheader failed Mem alloc fails shell_info_fe: No results! shell_info_fe: Receiving CDC header failed Mem alloc fails for shell response buffer shell_info_fe:Receiving CDC header failed Malloc failed for shell response rwl_shell_information_fe(wifi):Send command failed rwl_shell_information_fe(wifi):error in reading shell response Malloc failed for query information fecharacter buf ir_queryinformation_fe : retry %dcmd %d ir_queryinformation_fe :Error in reading the frag bytes rwl_queryinformation_fe: Unknownremote_type %d Malloc failed for set_info_fe character buf retry %d cmd %d ir_setinformation_fe: Sendcommand failed findserver ir_setinformation_fe: failed to readthe response rwl_setinformation_fe: Unknown remote_type:%d Usage: wl/dhd [--linuxdut/linux] [--debug] [--serial port no] [--ReadTimeout n] [--interactive] [--clientbatch] --linuxdut/linux removes the WLC_OID_BASE when sending the IOCTL command --debug prints out tx packets sending down the serial line, and other debug info --serial enables the remoteWL serial port number --interactive enables using WL in interactive mode --clientbatch enables command batchinng on the client, the default is batching on driver Usage: wl/dhd --dongle <Device Name> <command> <Device Name> COM1/COM2 (WinXP) or /dev/ttyS0 or /dev/ttyS1 (Linux) <command> - wl, shell or dhd command Depending on the client you are using(wl or dhd) shell command usage: sh <command> Usage: wl/dhd --socket <IP ADDRESS> [<PORT>] <command> <IPADDRESS> IP address of server machine <PORT> Port no of server If <PORT> is omitted, use default port number 8000 Usage: wl/dhd --wifi <MAC Address> <command> <MAC Address> MAC Address Autodetect: %d Autodetect failed, rwl server is either too old or unreachable. Use --nodetect to disable autodetect. join sup_wpa wsec set_pmk legacylink list disassoc xlist ioc %s:malloc(%d) failed malloc(%d) failed, free %d batched commands and exit batching mode batching %dth command %d calling add_one_batched_cmd() at non-command-batching mode, weird IOCTL GET command %d is not supported in batching mode rwl_open_serial:%s open COM failed with error %d. tcsetattr:setspeed Baud_rate set is:%d tcsetattr: tcgetattr: tcgetattr:VMIN is:%d tcgetattr:VTIME is:%d Failed to connect() to server errno:%d Error at rwl_bindSocket() Error at rwl_listensocket() Error at rwl_acceptConnection() Failed to send() wanted to send %d bytes sent only %d bytes Failed to Receive() asked %d bytes got %d bytes socket open error WriteToPort Failed Errno:%d rwl_write_serial_port failed numwritten %ld != len %ld ReadFromPort Failed asked for %d bytes got %d bytes Can't open serial port rwl_opensocket Fails: errno:%d Can't open socket rwl_open_transport: Unknown remote_type %d eth0 USAGE ERROR:Incorrect network interface USAGE ERROR:Incorrect port USAGE ERROR INFO: Network Interface:%s, Port:%d Error at SetTCPSocketOpt() Waiting for client to connect... Error at rwl_closeSocket() close_pipe: Unknown remote_type %d Err: command len exceeds buf len. Checkinitialization cmds rwl_wifi_allocate_actionframe: unable to allocate frame remote_CDC_DATA_wifi_rx: Error in reading the frame %d malloc failure Read bogus subtype %d Missing frag number %d Purge Error in reading the frame rwl_wifi_purge_actionframes:Purge Error in reading the frame Scan in progress. rwl_wifi_find_server_response: Failedto Send the Frame %d rwl_find_remote_wifi_server : Failed to allocate rwl_find_remote_wifi_server : Failed to allocate cur_etheraddr Error getting current Mac addr Scanning Channel: %d ... Failed to set the specified channel %d Failed to Send the Frame %d Server is on channel # %d Failed to set the specifiedchannel %d REF now moved to thechannel of server # %d Server is operating on diffrent channel.continue scanning remote_CDC_wifi_tx: data_len (%d) > buf_len (%d) data size exceeds data_len %d remote_CDC_wifi_tx: Failed to allocate memory Unable to read the action frame %d error remote_CDC_tx: data_len (%d) > buf_len (%d) rwl %d %d %d %d rwl %x %d %d %d CDC Header:No of bytes to be sent=%d Data:No of bytes to be sent=%d CDC_Tx: Header: Write failed CDC_Tx: Header: numwritten %ld != n_bytes %d Data_Tx: Header: Write failed Data_Tx: Header: numwritten %ld != len %d CDC_Tx: Header: numwritten %ld != len %d Packet sent! CDC_Tx: Data: Write failed remote_CDC_tx: Failed to get allocated buffer remote_CDC_rx_hdr: Header Read failed remote_CDC_rx_hdr: numread:%d remote_CDC_rx_hdr:No data to receive Unknown Transport Type remote_CDC_rx: remote data len (%d) > msg len (%d) remote_CDC_rx_hdr: Data Receivefailed remote_CDC_rx:Data Receive failed sockconnet SockDes=%d Server is not running mpc slow_timer fast_timer glacial_timer <unknown> /dev/socket/logdw /dev/stderr : (null) bionic/libc/bionic/libc_logging.cpp conversion specifier unsupported sign/precision unsupported libc FORTIFY_SOURCE: %s. Calling abort(). pthread_create sched_setscheduler call failed: %s pthread_create failed: couldn't allocate thread pthread_create failed: couldn't allocate %zd-byte stack: %s pthread_create failed: couldn't mprotect PROT_NONE %zd-byte stack guard region: %s pthread_create failed: clone failed: %s Unknown error %d Real-time %s signal %d Hangup Interrupt Quit Illegal instruction Trap Aborted Floating point exception Killed Bus error Segmentation fault Broken pipe Alarm clock Terminated User signal 1 User signal 2 Child exited Power failure Window size changed Urgent I/O condition I/O possible Stopped (signal) Stopped Continue Stopped (tty input) Stopped (tty output) Virtual timer expired Profiling timer expired CPU time limit exceeded File size limit exceeded Stack fault Bad system call Success Operation not permitted No such file or directory No such process Interrupted system call I/O error No such device or address Argument list too long Exec format error Bad file number No child processes Try again Out of memory Permission denied Bad address Block device required Device or resource busy File exists Cross-device link No such device Not a directory Is a directory Invalid argument File table overflow Too many open files Not a typewriter Text file busy File too large No space left on device Illegal seek Read-only file system Too many links Math argument out of domain of func Math result not representable Resource deadlock would occur File name too long No record locks available Function not implemented Directory not empty Too many symbolic links encountered No message of desired type Identifier removed Channel number out of range Level 2 not synchronized Level 3 halted Level 3 reset Link number out of range Protocol driver not attached No CSI structure available Level 2 halted Invalid exchange Invalid request descriptor Exchange full No anode Invalid request code Invalid slot Bad font file format Device not a stream No data available Timer expired Out of streams resources Machine is not on the network Package not installed Object is remote Link has been severed Advertise error Srmount error Communication error on send Protocol error Multihop attempted RFS specific error Not a data message Value too large for defined data type Name not unique on network File descriptor in bad state Remote address changed Can not access a needed shared library Accessing a corrupted shared library .lib section in a.out corrupted Attempting to link in too many shared libraries Cannot exec a shared library directly Illegal byte sequence Interrupted system call should be restarted Streams pipe error Too many users Socket operation on non-socket Destination address required Message too long Protocol wrong type for socket Protocol not available Protocol not supported Socket type not supported Operation not supported on transport endpoint Protocol family not supported Address family not supported by protocol Address already in use Cannot assign requested address Network is down Network is unreachable Network dropped connection because of reset Software caused connection abort Connection reset by peer No buffer space available Transport endpoint is already connected Transport endpoint is not connected Cannot send after transport endpoint shutdown Too many references: cannot splice Connection timed out Connection refused Host is down No route to host Operation already in progress Operation now in progress Stale NFS file handle Structure needs cleaning Not a XENIX named type file No XENIX semaphores available Is a named type file Remote I/O error Quota exceeded No medium found Wrong medium type Operation Canceled Required key not available Key has expired Key has been revoked Key was rejected by service Owner died State not recoverable ANDROID_PROPERTY_WORKSPACE /system/etc/hosts # gethostby*.getanswer: asked for "%s %s %s", got type "%s" /dev/socket/dnsproxyd r+ ^ ANDROID_DNS_MODE local hosts gethostbyname gethostbyname %u %s %d %u.%u.%u.%u.in-addr.arpa %x.%x. ip6.arpa gethostbyaddr %s %d %d %u gethostbyaddr files dns net.change %lu.%.2lu . %d BADTYPE TYPE%d BADCLASS CLASS%d ;; memory allocation failure ;; ns_parserr: %s ;; %s SECTION: ;; %s, type = %s, class = %s ; EDNS: version: %zu, udp=%u, flags=%04zx ; NSID: ; NSID ( ) ; OPT=%u ; OPT=%u: ;; ns_sprintrr: %s init debug aaonly(unimpl) usevc primry(unimpl) igntc recurs defnam styopn dnsrch insecure1 insecure2 noaliases inet6 edns0 dname dnssec no-tld-query no-nibble2 ?0x%lx? %u ;; ns_initparse: %s ;; ->>HEADER<<- opcode: %s, status: %s, id: %d ; flags: qr aa tc rd ra ?? ad cd ; %s: %d , %s: %d [af%d] - ; error: unknown LOC RR version %d %.2d %.2d.%.3d %c %d %.2d %.2d.%.3d %c %s%d.%.2dm %sm %sm %sm %04d%02d%02d%02d%02d%02d CLASS type NOERROR no error FORMERR format error SERVFAIL server failed NXDOMAIN no such domain name NOTIMP not implemented REFUSED refused YXDOMAIN domain name exists YXRRSET rrset exists NXRRSET rrset doesn't exist NOTAUTH not authoritative NOTZONE Not in zone BADSIG bad signature BADKEY bad key BADTIME bad time A address NS name server MD mail destination (deprecated) MF mail forwarder (deprecated) CNAME canonical name SOA start of authority MB mailbox MG mail group member MR mail rename NULL null WKS well-known service (deprecated) PTR domain name pointer HINFO host information MINFO mailbox information MX mail exchanger TXT text RP responsible person AFSDB DCE or AFS server X25 X25 address ISDN ISDN address RT router NSAP nsap address NSAP_PTR SIG signature KEY key PX mapping information GPOS geographical position (withdrawn) AAAA IPv6 address LOC location NXT next valid name (unimplemented) EID endpoint identifier (unimplemented) NIMLOC NIMROD locator (unimplemented) SRV server selection ATMA ATM address (unimplemented) NAPTR naptr KX key exchange CERT certificate IPv6 address (experminental) DNAME non-terminal redirection OPT opt apl DS delegation signer SSFP SSH fingerprint IPSECKEY IPSEC key RRSIG rrsig NSEC nsec DNSKEY DNS key DHCID dynamic host configuration identifier NSEC3 nsec3 NSEC3PARAM NSEC3 parameters HIP host identity protocol SPF sender policy framework TKEY tkey TSIG transaction signature IXFR incremental zone transfer AXFR zone transfer ZXFR compressed zone transfer MAILB mailbox-related data (deprecated) MAILA mail agent (deprecated) URN Naming Authority Key Exchange Certificate A6 IPv6 Address SINK Kitchen Sink (experimental) EDNS Options ANY "any" DLV DNSSEC look-aside validation PKIX PKIX (X.509v3) Certificate SPKI SPKI certificate PGP PGP certificate URL URL Private OID OID Private RSA RSA KEY with MD5 hash DH Diffie Hellman DSA Digital Signature Algorithm EXPIREONLY No algorithm PRIVATE Algorithm obtained from OID ZONE PREREQUISITE UPDATE ADDITIONAL QUERY ANSWER AUTHORITY IN CH CHAOS HS HESIOD NONE /dev/urandom ip6.int ;; res_init()... default dnsrch list: ;; %s ;; ..END.. RES_OPTIONS ;; res_setoptions("%s", "%s")... env ndots: ;; ndots=%d timeout: ;; timeout=%d attempts: ;; attempts=%d ;; res_setoptions("%s", "%s").. ;; debug no_tld_query rotate no-check-names nibble: nibble2: v6revmode: single both ;; res_query(%s, %d, %d) ;; res_query: mkquery failed ;; res_nquery: retry without EDNS0 ;; res_query: send error ;; rcode = (%s), counts = an:%d ns:%d ar:%d <Nil> ;; res_nquerydomain(%s, %s, %d, %d) %s.%s res_send: %s: %s res_send: %s ([%s].%s): %s ;; res_send() ;; Querying server (# %d) address = %s socket(vc) setsockopt bind/vc connect/vc write failed ;; response truncated ;; undersized: %d ;; old answer (unexpected): socket(dg) bind(dg) connect(dg) ;; new DG socket ;; timeout select recvfrom ;; old answer: ;; not our server: server rejected query with EDNS0: ;; wrong query name: server rejected query: ;; truncated answer ;; got answer: read failed read(vc) IQUERY CQUERYM CQUERYU NOTIFY 6 7 8 9 10 11 12 13 ZONEINIT ZONEREF udp tcp " "\ \ unknown IPSECKEY gateway type unknown RR type RR format error @ %s %s ( %lu ; serial ; refresh ; retry ; expiry ) ; minimum %u %u %u %u %u %u %u ( %d ) 0x%04x %u %u ; key_tag= %u %s %d %d %lu %s %d %d %d record too long to print %u bytes %02X ( %u \# %u%s ; %s ; %d%c \[x %02x %1x /%d] bionic/libc/upstream-netbsd/lib/libc/inet/nsap_addr.c ascii != NULL binary != NULL %u.%u.%u.%u %x nan NAN INF stack corruption detected abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789 :+-._ Local time zone must be set--see zic manual page ,M4.1.0,M10.5.0 posixrules localtime short read ANDROID_ROOT %s: %s not set! %s: couldn't allocate %zu-byte path %s/%s /usr/share/zoneinfo/tzdata %s: could not read header of "%s": %s tzdata %s: bad magic in "%s": "%.6s" %s: couldn't allocate %zd-byte index for "%s" %s: could not read index of "%s": %s %s: couldn't find any tzdata when looking for %s! %s: couldn't seek to index in "%s": %s %s: could not seek to %ld in "%s": %s TZ persist.sys.timezone FD_ISSET: file descriptor < 0 FD_ISSET: file descriptor >= FD_SETSIZE FD_ISSET: set is too small FD_CLR: file descriptor < 0 FD_CLR: file descriptor >= FD_SETSIZE FD_CLR: set is too small FD_SET: file descriptor < 0 FD_SET: file descriptor >= FD_SETSIZE FD_SET: set is too small read: prevented write past end of buffer read: count > SSIZE_MAX strchr: prevented read past end of buffer strlen: prevented read past end of buffer strncat: prevented write past end of buffer strncpy: prevented write past end of buffer strncpy: prevented read past end of buffer vsprintf: prevented write past end of buffer %s:%d: assertion "%s" failed %s:%d: %s: assertion "%s" failed longjmp botch %m BIONIC_DNSCACHE ;; res_nmkquery(%s, %s, %s, %s) ;; res_nopt() ;; res_opt()... ENDS0 DNSSEC Infinity NaN heap corruption detected by %s libc_malloc invalid address or address of corrupt block %p passed to %s max system bytes = %10lu system bytes = %10lu in use bytes = %10lu dhd_get_ramstart dhd_download dhd_verify_file_bytes dhd_load_file_bytes dhd_get_debug_info dhd_consoledump dhd_ramsize_adj dhd_dldn dhd_get_dev_type __dhd_drvio_ioctl proc_ucode_download N% kJ o ! c- F )g B  1Z 5 { ^ R 9w V s= G ,b C f( j $O n K v8 S <r W [0 ~_ z 4 \ y7 X 3} ? q Tu ;P #m H i' L @ e + D/ aU p > Q: t 6x ] |2 Y * d A` .E I l" M &h wlu_wlc_wrapper $ ( , 0 gethostby*.getanswer: asked for "%s", got "%s" d ' @B ; x @ 0123456789ABCDEFGHIJKLMNOPQRSTUV=0123456789abcdefghijklmnopqrstuv 0123456789 inet_nsap_ntoa ! " # $ % & ' ( ) * + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ a b c d e f g h i j k l m n o p q r s t u v w x y z [ \ ] ^ _ ` a b c d e f g h i j k l m n o p q r s t u v w x y z { | } ~  ! " # $ % & ' ( ) * + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ \ ] ^ _ ` A B C D E F G H I J K L M N O P Q R S T U V W X Y Z { | } ~  0123456789abcdef 0123456789 0123456789ABCDEF 0123456789abcdef0123456789ABCDEF !"#$%&'()*+,-./0123456789:;<=>?@abcdefghijklmnopqrstuvwxyz[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ GMT __bionic_open_tzdata_path __bionic_open_tzdata m n 7 ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/ ? $@ Y@ @ @ @ j @ .A cA A e A _ B vH7B mB @ 0 B B 4& k C 7y AC W4vC Ngm C = ` X C@ x DP KD M D } 7y AC n F ? O8M2 0 Hw Z< s O utry_realloc_chunk dlfree dispose_chunk add_segment release_unused_segments tmalloc_small dlmalloc_real tmalloc_large prepend_alloc ((((( AAAAAA BBBBBB tcpmux t echo t echo u discard t sink null discard u sink null systat t users daytime t daytime u netstat t qotd t quote msp t msp u chargen t ttytst source chargen u ttytst source ftp-data t ftp t fsp u fspd ssh t ssh u telnet t smtp t mail time %t timserver time %u timserver rlp 'u resource nameserver *t name whois +t nicname tacacs 1t tacacs 1u re-mail-ck 2t re-mail-ck 2u domain 5t nameserver domain 5u nameserver mtp 9t tacacs-ds At tacacs-ds Au bootps Ct bootps Cu bootpc Dt bootpc Du tftp Eu gopher Ft gopher Fu rje Mt netrjs finger Ot www Pt http www Pu link Wt ttylink kerberos Xt kerberos5 krb5 kerberos-sec kerberos Xu kerberos5 krb5 kerberos-sec supdup _t hostnames et hostname iso-tsap ft tsap acr-nema ht dicom acr-nema hu dicom csnet-ns it cso-ns csnet-ns iu cso-ns rtelnet kt rtelnet ku pop2 mt postoffice pop-2 pop2 mu pop-2 pop3 nt pop-3 pop3 nu pop-3 sunrpc ot portmapper sunrpc ou portmapper auth qt authentication tap ident sftp st uucp-path ut nntp wt readnews untp ntp {t ntp {u pwdgen t pwdgen u loc-srv t epmap loc-srv u epmap netbios-ns t netbios-ns u netbios-dgm t netbios-dgm u netbios-ssn t netbios-ssn u imap2 t imap imap2 u imap snmp t snmp u snmp-trap t snmptrap snmp-trap u snmptrap cmip-man t cmip-man u cmip-agent t cmip-agent u mailq t mailq u xdmcp t xdmcp u nextstep t NeXTStep NextStep nextstep u NeXTStep NextStep bgp t bgp u prospero t prospero u irc t irc u smux t smux u at-rtmp t at-rtmp u at-nbp t at-nbp u at-echo t at-echo u at-zis t at-zis u qmtp t qmtp u z3950 t wais z3950 u wais ipx t ipx u imap3 t imap3 u pawserv Yt pawserv Yu zserv Zt zserv Zu fatserv [t fatserv [u rpc2portmap qt rpc2portmap qu codaauth2 rt codaauth2 ru clearcase st Clearcase clearcase su Clearcase ulistserv tt ulistserv tu ldap t ldap u imsp t imsp u https t https u snpp t snpp u microsoft-ds t microsoft-ds u saft t saft u isakmp t isakmp u rtsp *t rtsp *u nqs _t nqs _u npmp-local bt dqs313_qmaster npmp-local bu dqs313_qmaster npmp-gui ct dqs313_execd npmp-gui cu dqs313_execd hmmp-ind dt dqs313_intercell hmmp-ind du dqs313_intercell ipp wt ipp wu exec t biff u comsat login t who u whod shell t cmd syslog u printer t spooler talk u ntalk u route u router routed timed u timeserver tempo t newdate courier t rpc conference t chat netnews t readnews netwall u gdomap t gdomap u uucp t uucpd klogin t kshell t krcmd afpovertcp $t afpovertcp $u remotefs ,t rfs_server rfs nntps 3t snntp nntps 3u snntp submission Kt submission Ku ldaps |t ldaps |u tinc t tinc u silc t silc u kerberos-adm t webster t webster u rsync it rsync iu ftps-data t ftps t telnets t telnets u imaps t imaps u ircs t ircs u pop3s t pop3s u socks 8t socks 8u proofd Et proofd Eu rootd Ft rootd Fu openvpn t openvpn u rmiregistry Kt rmiregistry Ku kazaa t kazaa u nessus t nessus u lotusnote Ht lotusnotes lotusnote Hu lotusnotes ms-sql-s t ms-sql-s u ms-sql-m t ms-sql-m u ingreslock t ingreslock u prospero-np t prospero-np u datametrics mt old-radius datametrics mu old-radius sa-msg-port nt old-radacct sa-msg-port nu old-radacct kermit qt kermit qu l2f t l2tp l2f u l2tp radius t radius u radius-acct t radacct radius-acct u radacct unix-status t log-server t remoteping t nfs t nfs u rtcm-sc104 5t rtcm-sc104 5u cvspserver at cvspserver au venus ~t venus ~u venus-se t venus-se u codasrv t codasrv u codasrv-se t codasrv-se u mon t mon u dict Dt dict Du gpsd t gpsd u gds_db t gds_db u icpv2 :t icp icpv2 :u icp mysql t mysql u nut t nut u distcc 0t distcc 0u daap it daap iu svn jt subversion svn ju subversion iax t iax u radmin-port #t radmin-port #u rfe u rfe t sip t sip u sip-tls t sip-tls u xmpp-client ft jabber-client xmpp-client fu jabber-client xmpp-server t jabber-server xmpp-server u jabber-server cfengine t cfengine u postgresql 8t postgres postgresql 8u postgres x11 pt x11-0 x11 pu x11-0 x11-1 qt x11-1 qu x11-2 rt x11-2 ru x11-3 st x11-3 su x11-4 tt x11-4 tu x11-5 ut x11-5 uu x11-6 vt x11-6 vu x11-7 wt x11-7 wu gnutella-svc t gnutella-svc u gnutella-rtr t gnutella-rtr u afs3-fileserver Xt bbs afs3-fileserver Xu bbs afs3-callback Yt afs3-callback Yu afs3-prserver Zt afs3-prserver Zu afs3-vlserver [t afs3-vlserver [u afs3-kaserver \t afs3-kaserver \u afs3-volser ]t afs3-volser ]u afs3-errors ^t afs3-errors ^u afs3-bos _t afs3-bos _u afs3-update `t afs3-update `u afs3-rmtsys at afs3-rmtsys au font-service t xfs font-service u xfs bacula-dir# t bacula-dir# u bacula-fd# t bacula-fd# u bacula-sd# t bacula-sd# u amanda'`t amanda'`u hkp,kt hkp,ku bprd5 t bprd5 u bpdbm5 t bpdbm5 u bpjava-msvc5 t bpjava-msvc5 u vnetd5 t vnetd5 u bpcd5 t bpcd5 u vopied5 t vopied5 u wnn6W t wnn6W u kerberos4 u kerberos-iv kdc kerberos4 t kerberos-iv kdc kerberos_master u kerberos_master t passwd_server u krb_prop t krb5_prop hprop krbupdate t kreg kpasswd t kpwd swat t kpop Ut knetd t zephyr-srv 6u zephyr-clt 7u zephyr-hm 8u eklogin 9t kx ?t iprop It supfilesrv gt supfiledbg gt linuxconf bt poppassd jt poppassd ju ssmtp t smtps moira_db t moira_update t moira_ureg u spamd t omirr (t omirrd omirr (u omirrd customs t customs u skkserv t predict u rmtcfg t wipld t xtel !t xtelw "t support t sieve t cfinger t ndtp t frox It ninstall ft ninstall fu zebrasrv (t zebra )t ripd *t ripngd +t ospfd ,t bgpd -t ospf6d .t ospfapi /t isisd 0t afbackup t afbackup u afmbackup t afmbackup u xtell t fax t hylafax t distmp3 t munin Ut lrrd enbd-cstatd t enbd-sstatd t pcrd t noclog t noclog u hostmon t hostmon u rplay u rplay t rptp u rptp t nsca #t mrtd *t bgpsim +t canna 0t sane-port t sane saned ircd t zope-ftp Ut webcache t tproxy t omniorb t omniorb u clc-build-daemon# t xinetd# t mandelspawn$ u mandelbrot zope% t kamanda'at kamanda'au amandaidx'bt amidxtape'ct smsqp+ t smsqp+ u xpilot; t xpilot; u sgi-cmsdBiu sgi-crsdBju sgi-gcdBku sgi-cadBlt isdnlogN+t isdnlogN+u vboxdN,t vboxdN,u binkp_ t aspj t aspj u dircproxy t tfido t fido t
E A M e l < y & 0 S ` " G O q  ! g r q ( q 8 ] n q B L  u n M U 9 B W _ h q f q q Y q : A u ~ ` q $ 1 O Z + f ` i [ ' - j n { F E K c Y k k ; B i s & / < C x x } , V e | > y y } } & . @ M G u ) E U u & K S w q M V , 5 Z e ? N 5 A Q 9 d | & ) 6 c q ! [ h y $ M \ 1 : [ c s 9 x r | @ 3 r x | @ @ @ (* 4 memcpy: prevented write past end of buffer memset: prevented write past end of buffer strcat: prevented write past end of buffer strcpy: prevented write past end of buffer h 0 @ /dev/__properties__ 0000000000000000 } 9 } 9 <~ 9 ~ } ~ K
GCC: (GNU) 4.8 clang version 3.5
.shstrtab .text .note.android.ident .ARM.exidx .ARM.extab .rodata .eh_frame .eh_frame_hdr .data.rel.ro.local .preinit_array .init_array .fini_array .got .data .bss .comment .note.gnu.gold-version .ARM.attributes .gnu_debuglink