1*4882a593Smuzhiyun******************************** 2*4882a593SmuzhiyunXilinx ZCU106 board - ZynqMP SoC 3*4882a593Smuzhiyun******************************** 4*4882a593Smuzhiyun 5*4882a593SmuzhiyunThis document describes the Buildroot support for the ZCU106 board by 6*4882a593SmuzhiyunXilinx, based on the Zynq UltraScale+ MPSoC (aka ZynqMP). It has been 7*4882a593Smuzhiyuntested with the EK-U1-ZCU106-ES2 pre-production board. 8*4882a593Smuzhiyun 9*4882a593SmuzhiyunHow to build it 10*4882a593Smuzhiyun=============== 11*4882a593Smuzhiyun 12*4882a593SmuzhiyunConfigure Buildroot: 13*4882a593Smuzhiyun 14*4882a593Smuzhiyun $ make zynqmp_zcu106_defconfig 15*4882a593Smuzhiyun 16*4882a593SmuzhiyunCompile everything and build the rootfs image: 17*4882a593Smuzhiyun 18*4882a593Smuzhiyun $ make 19*4882a593Smuzhiyun 20*4882a593SmuzhiyunResult of the build 21*4882a593Smuzhiyun------------------- 22*4882a593Smuzhiyun 23*4882a593SmuzhiyunAfter building, you should get a tree like this: 24*4882a593Smuzhiyun 25*4882a593Smuzhiyun output/images/ 26*4882a593Smuzhiyun +-- atf-uboot.ub 27*4882a593Smuzhiyun +-- bl31.bin 28*4882a593Smuzhiyun +-- boot.bin 29*4882a593Smuzhiyun +-- boot.vfat 30*4882a593Smuzhiyun +-- Image 31*4882a593Smuzhiyun +-- rootfs.ext2 32*4882a593Smuzhiyun +-- rootfs.ext4 -> rootfs.ext2 33*4882a593Smuzhiyun +-- sdcard.img 34*4882a593Smuzhiyun +-- system.dtb -> zynqmp-zcu106-revA.dtb 35*4882a593Smuzhiyun +-- u-boot.bin 36*4882a593Smuzhiyun `-- zynqmp-zcu106-revA.dtb 37*4882a593Smuzhiyun 38*4882a593SmuzhiyunHow to write the SD card 39*4882a593Smuzhiyun======================== 40*4882a593Smuzhiyun 41*4882a593SmuzhiyunWARNING! This will destroy all the card content. Use with care! 42*4882a593Smuzhiyun 43*4882a593SmuzhiyunThe sdcard.img file is a complete bootable image ready to be written 44*4882a593Smuzhiyunon the boot medium. To install it, simply copy the image to an SD 45*4882a593Smuzhiyuncard: 46*4882a593Smuzhiyun 47*4882a593Smuzhiyun # dd if=output/images/sdcard.img of=/dev/sdX 48*4882a593Smuzhiyun 49*4882a593SmuzhiyunWhere 'sdX' is the device node of the SD. 50*4882a593Smuzhiyun 51*4882a593SmuzhiyunEject the SD card, insert it in the board, and power it up. 52