1STM32F429 Discovery 2=================== 3 4This tutorial describes how to use the predefined Buildroot 5configuration for the STM32F429 Discovery evaluation platform. 6 7Supported HW 8------------ 9 10 - STM32F429I-DISCO evaluation board 11 - STM32F429I-DISC1 evaluation board 12 13Building 14-------- 15 16 make stm32f429_disco_defconfig 17 make 18 19Wire the UART 20------------- 21 22Use a USB to TTL adapter, and connect: 23 24 - RX to PA9 25 - TX to PA10 26 - GND to one of the GND available on the board 27 28The UART is configured at 115200. 29 30Flashing 31-------- 32 33 ./board/stmicroelectronics/stm32f429-disco/flash.sh output/ \ 34 {stm32f429discovery|stm32f429disc1} 35 36It will flash the minimal bootloader, the Device Tree Blob, and the 37kernel image which includes the root filesystem as initramfs. 38