1*4882a593SmuzhiyunIntro 2*4882a593Smuzhiyun===== 3*4882a593Smuzhiyun 4*4882a593SmuzhiyunThis default configuration will allow you to start experimenting with the 5*4882a593Smuzhiyunbuildroot environment for the Orangepi Lite2. With the current configuration 6*4882a593Smuzhiyunit will bring-up the board, and allow access through the serial console. 7*4882a593Smuzhiyun 8*4882a593SmuzhiyunOrangepi Lite2 link: 9*4882a593Smuzhiyunhttp://www.orangepi.org/Orange%20Pi%20Lite%202/ 10*4882a593Smuzhiyun 11*4882a593SmuzhiyunWiki link: 12*4882a593Smuzhiyunhttps://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Lite2 13*4882a593Smuzhiyun 14*4882a593SmuzhiyunHow to build 15*4882a593Smuzhiyun============ 16*4882a593Smuzhiyun 17*4882a593Smuzhiyun $ make orangepi_lite2_defconfig 18*4882a593Smuzhiyun $ make 19*4882a593Smuzhiyun 20*4882a593SmuzhiyunNote: you will need access to the internet to download the required 21*4882a593Smuzhiyunsources. 22*4882a593Smuzhiyun 23*4882a593SmuzhiyunHow to write the SD card 24*4882a593Smuzhiyun======================== 25*4882a593Smuzhiyun 26*4882a593SmuzhiyunOnce the build process is finished you will have an image called "sdcard.img" 27*4882a593Smuzhiyunin the output/images/ directory. 28*4882a593Smuzhiyun 29*4882a593SmuzhiyunCopy the bootable "sdcard.img" onto an SD card with "dd": 30*4882a593Smuzhiyun 31*4882a593Smuzhiyun $ sudo dd if=output/images/sdcard.img of=/dev/sdX 32*4882a593Smuzhiyun $ sudo sync 33*4882a593Smuzhiyun 34*4882a593SmuzhiyunInsert the micro SDcard in your Orangepi Lite2 and power it up. The console 35*4882a593Smuzhiyunis on the serial line, 115200 8N1. 36*4882a593Smuzhiyun 37*4882a593SmuzhiyunWiFi 38*4882a593Smuzhiyun==== 39*4882a593Smuzhiyun 40*4882a593Smuzhiyun # wpa_passphrase ACCESSPOINTNAME >> /etc/wpa_supplicant.conf 41*4882a593Smuzhiyun (type password and enter) 42*4882a593Smuzhiyun # wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -B 43*4882a593Smuzhiyun # udhcpc -i wlan0 44*4882a593Smuzhiyun # ping google.com 45