1*4882a593SmuzhiyunA10-OLinuXino-LIME 2*4882a593Smuzhiyun 3*4882a593SmuzhiyunIntro 4*4882a593Smuzhiyun===== 5*4882a593Smuzhiyun 6*4882a593SmuzhiyunThese are open hardware boards, all based on the Allwinner A10 SoC. 7*4882a593Smuzhiyun 8*4882a593Smuzhiyunfor more details about the boards see the following pages: 9*4882a593Smuzhiyun - https://www.olimex.com/Products/OLinuXino/open-source-hardware 10*4882a593Smuzhiyun - https://www.olimex.com/Products/OLinuXino/A10/A10-OLinuXino-LIME/ 11*4882a593Smuzhiyun 12*4882a593SmuzhiyunThe following defconfigs are available: 13*4882a593Smuzhiyun - olimex_a10_olinuxino_lime_defconfig 14*4882a593Smuzhiyun for the A10-OLinuXino-LIME board using mainline kernel 15*4882a593Smuzhiyun 16*4882a593Smuzhiyun(see http://linux-sunxi.org/Linux_Kernel for more details) 17*4882a593Smuzhiyun 18*4882a593SmuzhiyunHow to build it 19*4882a593Smuzhiyun=============== 20*4882a593Smuzhiyun 21*4882a593SmuzhiyunConfigure Buildroot: 22*4882a593Smuzhiyun 23*4882a593Smuzhiyun $ make <board>_defconfig 24*4882a593Smuzhiyun 25*4882a593SmuzhiyunCompile everything and build the rootfs image: 26*4882a593Smuzhiyun 27*4882a593Smuzhiyun $ make 28*4882a593Smuzhiyun 29*4882a593SmuzhiyunResult of the build 30*4882a593Smuzhiyun------------------- 31*4882a593Smuzhiyun 32*4882a593SmuzhiyunAfter building, you should get a tree like this: 33*4882a593Smuzhiyun 34*4882a593Smuzhiyun output/images/ 35*4882a593Smuzhiyun +-- boot.scr 36*4882a593Smuzhiyun +-- rootfs.ext2 37*4882a593Smuzhiyun +-- rootfs.ext4 -> rootfs.ext2 38*4882a593Smuzhiyun +-- sdcard.img 39*4882a593Smuzhiyun +-- sun4i-a10-olinuxino-lime.dtb (lime, mainline) 40*4882a593Smuzhiyun +-- u-boot.bin 41*4882a593Smuzhiyun +-- u-boot-sunxi-with-spl.bin 42*4882a593Smuzhiyun `-- zImage 43*4882a593Smuzhiyun 44*4882a593Smuzhiyun 45*4882a593SmuzhiyunHow to write the SD card 46*4882a593Smuzhiyun======================== 47*4882a593Smuzhiyun 48*4882a593SmuzhiyunThe sdcard.img file is a complete bootable image ready to be written 49*4882a593Smuzhiyunon the boot medium. To install it, simply copy the image to a uSD 50*4882a593Smuzhiyuncard: 51*4882a593Smuzhiyun 52*4882a593Smuzhiyun # dd if=output/images/sdcard.img of=/dev/sdX 53*4882a593Smuzhiyun 54*4882a593SmuzhiyunWhere 'sdX' is the device node of the uSD. 55*4882a593Smuzhiyun 56*4882a593SmuzhiyunEject the SD card, insert it in the A10-OLinuXino board, and power it up. 57*4882a593Smuzhiyun 58