1Nexbox A95X 2 3Intro 4===== 5 6Nexbox A95X is a low cost Android STB based around an Amlogic s905(x) SoC 7(quad A53), 8/16GB eMMC and 1/2GB RAM. To use this defconfig, wires to the 8internal UART solder pads must be added. See the linux-meson page for 9details: 10 11http://linux-meson.com/doku.php?id=nexbox_a95x_s905 12 13Both the s905 (gxbb) and s905x (gxl) variant is supported. 14 15This default configuration will allow you to start experimenting with the 16buildroot environment for the A95X. With the current configuration it will 17bring-up the board from microSD, and allow access through the serial 18console. 19 20How to build it 21=============== 22 23Configure Buildroot: 24 25 $ make nexbox_a95x_defconfig 26 27Compile everything and build the SD card image: 28 29 $ make 30 31How to write the SD card 32======================== 33 34Once the build process is finished you will have an image called "sdcard.img" 35in the output/images/ directory. 36 37Copy the bootable "sdcard.img" onto a microSD card with "dd": 38 39 $ sudo dd if=output/images/sdcard.img of=/dev/sdX 40 41How to boot 42=========== 43 44Insert microSD card and connect serial cable. Power board and stop 45U-Boot by pressing any key. Boot the system by typing: 46 47fatload mmc 0:1 0x1070000 boot.scr 48autoscr 0x1070000 49