1*4882a593SmuzhiyunHow to get started with the MinnowBoard MAX 2*4882a593Smuzhiyun=========================================== 3*4882a593Smuzhiyun 4*4882a593Smuzhiyun1. Build 5*4882a593Smuzhiyun 6*4882a593Smuzhiyun Apply the defconfig: 7*4882a593Smuzhiyun 8*4882a593Smuzhiyun $ make minnowboard_max_defconfig 9*4882a593Smuzhiyun 10*4882a593Smuzhiyun Add any additional packages required and build: 11*4882a593Smuzhiyun 12*4882a593Smuzhiyun $ make 13*4882a593Smuzhiyun 14*4882a593Smuzhiyun2. Write the SD card 15*4882a593Smuzhiyun 16*4882a593Smuzhiyun The build process will create a SD card image in output/images. 17*4882a593Smuzhiyun Write the image to an mSD card, insert into the MinnowBoard MAX 18*4882a593Smuzhiyun and power the board on. 19*4882a593Smuzhiyun 20*4882a593Smuzhiyun $ dd if=output/images/sdcard.img of=/dev/mmcblk0; sync 21*4882a593Smuzhiyun 22*4882a593Smuzhiyun The system starts two consoles: one on the serial port 23*4882a593Smuzhiyun and one on HDMI. 24*4882a593Smuzhiyun 25*4882a593Smuzhiyun3. Enjoy 26*4882a593Smuzhiyun 27*4882a593SmuzhiyunAdditional information about this board can be found at 28*4882a593Smuzhiyunhttp://www.minnowboard.org/. 29