xref: /OK3568_Linux_fs/buildroot/board/librecomputer/lafrite/readme.txt (revision 4882a59341e53eb6f0b4789bf948001014eff981)
1*4882a593SmuzhiyunIntro
2*4882a593Smuzhiyun=====
3*4882a593Smuzhiyun
4*4882a593SmuzhiyunLibre Computer "La Frite" is a low cost SBC based around an Amlogic
5*4882a593Smuzhiyuns805x SoC (quad A53), 512MB/1GB DDR4 and a 16MB SPI NOR flash:
6*4882a593Smuzhiyun
7*4882a593Smuzhiyunhttps://libre.computer/products/boards/aml-s805x-ac/
8*4882a593Smuzhiyun
9*4882a593SmuzhiyunHow to build it
10*4882a593Smuzhiyun===============
11*4882a593Smuzhiyun
12*4882a593SmuzhiyunConfigure Buildroot:
13*4882a593Smuzhiyun
14*4882a593Smuzhiyun    $ make lafrite_defconfig
15*4882a593Smuzhiyun
16*4882a593SmuzhiyunCompile everything and build the USB flash drive image:
17*4882a593Smuzhiyun
18*4882a593Smuzhiyun    $ make
19*4882a593Smuzhiyun
20*4882a593SmuzhiyunHow to write the USB flash drive image
21*4882a593Smuzhiyun======================================
22*4882a593Smuzhiyun
23*4882a593SmuzhiyunOnce the build process is finished you will have an image called "usb.img"
24*4882a593Smuzhiyunin the output/images/ directory.
25*4882a593Smuzhiyun
26*4882a593SmuzhiyunCopy the bootable "usb.img" onto a USB flash drive with "dd":
27*4882a593Smuzhiyun
28*4882a593Smuzhiyun  $ sudo dd if=output/images/usb.img of=/dev/sdX
29*4882a593Smuzhiyun
30*4882a593SmuzhiyunHow to boot
31*4882a593Smuzhiyun===========
32*4882a593Smuzhiyun
33*4882a593SmuzhiyunInsert flash drive to the USB connector furthest away from the IR
34*4882a593Smuzhiyunreceiver and power up board. The system will boot automatically.
35