1Buildroot for Embest RIoTboard 2============================== 3 4This is a small development board, based on Freescale IMX6 Solo SoC 5(single core ARM Cortex-A9). 6 7More details about the board can be found at: 8 9 http://www.embest-tech.com/riotboard 10 111. Compiling buildroot 12---------------------- 13 14$ make riotboard_defconfig 15$ make 16 172. Installing buildroot 18----------------------- 19 20Prepare an SD-card and plug it into your card reader. Always double 21check the block device before writing to it, as writing to the wrong 22block device can cause irrecoverable data loss. Now you can write the 23image to your SD-card: 24 25sudo dd if=output/images/sdcard.img of=/dev/<sdcard-block-device> bs=1M 26 273. Running buildroot 28-------------------- 29 30Position the board so you can read the label "RIoTboard" on the right 31side of SW1 DIP switches. Configure the SW1 swiches like this: 32 331 0 1 0 0 1 0 1 34ON OFF ON OFF OFF ON OFF ON 35 36Now plug your prepared SD-card in slot J6. Connect a serial console 37(115200, 8, N, 1) to header J18. Connect a 5V/1A power supply to the 38board and enjoy. 39