readme.txt
1Acme Systems Arietta G25
2
3Intro
4=====
5
6This default configuration will allow you to start experimenting with the
7buildroot environment for the Arietta G25. With the current configuration
8it will bring-up the board, and allow access through the serial console.
9
10You can find additional informations, tutorials and a very comprehensive
11documentation on http://www.acmesystems.it/arietta.
12
13Build instructions
14==================
15
16To build an image for the Arietta G25 choose the configuration
17corresponding to the Arietta variant.
18
19For 128MB RAM variant type:
20
21$ make acmesystems_arietta_g25_128mb_defconfig
22
23else for 256MB RAM variant type:
24
25$ make acmesystems_arietta_g25_256mb_defconfig
26
27To customize the configuration chosen type:
28
29$ make menuconfig
30
31When you are ready to start building Buildroot type:
32
33$ make
34
35How to write the microSD card
36=============================
37
38Once the build process is finished you will have an image called "sdcard.img"
39in the output/images/ directory.
40
41Copy the bootable "sdcard.img" onto an SD card with "dd":
42
43 $ sudo dd if=output/images/sdcard.img of=/dev/sdX
44
45Insert the microSD card into the Arietta slot and power it.
46
47The image just built is fairly basic and the only output
48you will get is on serial console, please consider to use a DPI
49cable (http://www.acmesystems.it/DPI)
50