Home
last modified time | relevance | path

Searched refs:SW4 (Results 1 – 12 of 12) sorted by relevance

/rk3399_rockchip-uboot/board/freescale/p1010rdb/
H A DREADME.P1010RDB-PB67 SW4[1:4]= 1010
73 SW4[1:4]= 1111 and SW3[3:4]= 00 for 16bit NOR boot
74 SW4[1:4]= 1010 and SW3[3:4]= 01 for 8bit NAND boot
75 SW4[1:4]= 0110 and SW3[3:4]= 00 for SPI boot
76 SW4[1:4]= 0111 and SW3[3:4]= 10 for SD boot
153 set SW1[8]=0, SW4[1:4]= 1111 and SW3[3:4]= 00, then power on the board
157 set SW1[8]=1, SW4[1:4]= 1111 and SW3[3:4]= 00, then power on the board
162 Set SW4[1:4]= 1010 and SW3[3:4]= 01, then power on the board
168 set SW4[1:4]= 0110 and SW3[3:4]= 00, then power on the board
175 set SW4[1:4]= 0111 and SW3[3:4]= 10, then power on the board
H A DREADME.P1010RDB-PA82 SW4[1:4]= 1111 and SW6[4]=0 for boot from 16bit NOR flash
83 SW4[1:4]= 1000 and SW6[4]=1 for boot from 8bit NAND flash
84 SW4[1:4]= 0110 and SW6[4]=0 for boot from SPI flash
111 3. Check SW4[1:4]= 1111 and SW6[4]=0, then power on.
146 3. Check SW4[1:4]= 1000 and SW6[4]=1, then power on.
165 3. Check SW4[1:4]= 0110 and SW6[4]=0, then power on.
/rk3399_rockchip-uboot/board/freescale/common/
H A Dmc34vr500.c31 if (sw > SW4) { in mc34vr500_get_sw_volt()
70 if (sw > SW4 || sw_volt < 625) in mc34vr500_set_sw_volt()
/rk3399_rockchip-uboot/board/freescale/ls1046ardb/
H A Dls1046ardb.c112 return mc34vr500_get_sw_volt(SW4); in get_serdes_volt()
117 return mc34vr500_set_sw_volt(SW4, svdd); in set_serdes_volt()
/rk3399_rockchip-uboot/include/power/
H A Dmc34vr500_pmic.h169 SW4, enumerator
/rk3399_rockchip-uboot/board/freescale/mpc8641hpcn/
H A DREADME48 SW4(1-2) = 11 CONFIG_SYS_HOSTMODE = 11 :: both prots host/root
49 SW4(3-4) = 11 CONFIG_SYS_BOOTSEQ = 11 :: no boot seq
50 SW4(5-8) = 0011 CONFIG_SYS_IOPORT = 0011 :: both PEX
/rk3399_rockchip-uboot/board/freescale/mpc837xemds/
H A DREADME17 SW4[8] is the bit labeled 8 on Switch 4.
27 SW4[1-8]= 0000_0110 (core PLL setting)
/rk3399_rockchip-uboot/doc/
H A DREADME.mpc85xxcds135 SW4=10001000
160 SW4=11111110
174 SW4=11110011
/rk3399_rockchip-uboot/board/freescale/mpc832xemds/
H A DREADME18 SW4[8] is the bit labeled 8 on Switch 4.
29 SW4[1-8]= 0001_0010 (Flash boot on local bus, system PLL setting)
/rk3399_rockchip-uboot/board/freescale/mx35pdk/
H A DREADME77 (SW1-SW2) and on the DEBUG board (SW4-SW10).
/rk3399_rockchip-uboot/board/sbc8548/
H A DREADME237 SW4 settings are readable from the EPLD and are currently not used for
/rk3399_rockchip-uboot/board/freescale/t102xqds/
H A DREADME195 SRDS_PRTCL_S1 SD1_REF_CLK1 SD1_REF_CLK2 SW4[1:4]