| /OK3568_Linux_fs/kernel/arch/alpha/kernel/ |
| H A D | core_wildfire.c | 92 printk(KERN_ERR "Failed to request IO on qbb %d hose %d\n", in wildfire_init_hose() 95 printk(KERN_ERR "Failed to request MEM on qbb %d hose %d\n", in wildfire_init_hose() 195 printk(KERN_ERR "fast QSD_WHAMI at base %p is 0x%lx\n", fast, temp); in wildfire_hardware_probe() 222 printk(KERN_ERR "QSA_QBB_ID at base %p is 0x%lx\n", qsa, temp); in wildfire_hardware_probe() 234 printk(KERN_ERR "GPA_QBB_MAP[%d] at base %p is 0x%lx\n", in wildfire_hardware_probe() 256 printk(KERN_ERR "QSD_WHAMI at base %p is 0x%lx\n", qsd, temp); in wildfire_hardware_probe() 265 printk(KERN_ERR "QSA_QBB_POP_0 at base %p is 0x%lx\n", qsa, temp); in wildfire_hardware_probe() 272 printk(KERN_ERR "QSA_QBB_POP_1 at base %p is 0x%lx\n", qsa, temp); in wildfire_hardware_probe() 279 printk(KERN_ERR "QSA_QBB_ID at %p is 0x%lx\n", qsa, temp); in wildfire_hardware_probe() 478 printk(KERN_ERR "PCI registers for QBB %d hose %d (%p)\n", in wildfire_dump_pci_regs() [all …]
|
| /OK3568_Linux_fs/kernel/sound/isa/ |
| H A D | sc6000.c | 227 snd_printk(KERN_ERR "DSP Command (0x%x) timeout.\n", cmd); in sc6000_write() 238 snd_printk(KERN_ERR "CMD 0x%x: failed!\n", command); in sc6000_dsp_get_answer() 278 snd_printk(KERN_ERR "CMD 0x%x: failed!\n", COMMAND_5C); in sc6000_hw_cfg_write() 282 snd_printk(KERN_ERR "DATA 0x%x: failed!\n", cfg[0]); in sc6000_hw_cfg_write() 286 snd_printk(KERN_ERR "DATA 0x%x: failed!\n", cfg[1]); in sc6000_hw_cfg_write() 290 snd_printk(KERN_ERR "CMD 0x%x: failed!\n", COMMAND_C5); in sc6000_hw_cfg_write() 301 snd_printk(KERN_ERR "CMD 0x%x: failed!\n", WRITE_MDIRQ_CFG); in sc6000_cfg_write() 305 snd_printk(KERN_ERR "sc6000_cfg_write: failed!\n"); in sc6000_cfg_write() 317 snd_printk(KERN_ERR "CMD 0x%x: failed!\n", in sc6000_setup_board() 324 snd_printk(KERN_ERR "sc6000_read after CMD 0x%x: failed\n", in sc6000_setup_board() [all …]
|
| /OK3568_Linux_fs/kernel/arch/powerpc/platforms/44x/ |
| H A D | machine_check.c | 54 printk(KERN_ERR "Machine check in kernel mode.\n"); in machine_check_47x() 56 printk(KERN_ERR "Instruction Synchronous Machine Check exception\n"); in machine_check_47x() 62 printk(KERN_ERR "Instruction Read PLB Error\n"); in machine_check_47x() 64 printk(KERN_ERR "Data Read PLB Error\n"); in machine_check_47x() 66 printk(KERN_ERR "Data Write PLB Error\n"); in machine_check_47x() 68 printk(KERN_ERR "TLB Parity Error\n"); in machine_check_47x() 71 printk(KERN_ERR "I-Cache Parity Error\n"); in machine_check_47x() 74 printk(KERN_ERR "D-Cache Search Parity Error\n"); in machine_check_47x() 76 printk(KERN_ERR "GPR Parity Error\n"); in machine_check_47x() 78 printk(KERN_ERR "FPR Parity Error\n"); in machine_check_47x() [all …]
|
| /OK3568_Linux_fs/kernel/drivers/media/pci/saa7164/ |
| H A D | saa7164-fw.c | 32 printk(KERN_ERR "%s() timeout (no d/l ack)\n", in saa7164_dl_wait_ack() 48 printk(KERN_ERR "%s() timeout (no d/l clr)\n", in saa7164_dl_wait_clr() 155 printk(KERN_ERR "%s() image corrupt\n", __func__); in saa7164_downloadimage() 161 printk(KERN_ERR "%s() device memory corrupt\n", in saa7164_downloadimage() 227 printk(KERN_ERR "%s() firmware corrupt\n", in saa7164_downloadfirmware() 232 printk(KERN_ERR "%s() device memory corrupt\n", in saa7164_downloadfirmware() 237 printk(KERN_ERR "%s() no first image\n", in saa7164_downloadfirmware() 244 printk(KERN_ERR in saa7164_downloadfirmware() 252 printk(KERN_ERR in saa7164_downloadfirmware() 260 printk(KERN_ERR in saa7164_downloadfirmware() [all …]
|
| H A D | saa7164-cmd.c | 96 printk(KERN_ERR in saa7164_irq_dequeue() 102 printk(KERN_ERR "%s() ret = %x\n", __func__, ret); in saa7164_irq_dequeue() 143 printk(KERN_ERR "found timed out command on the bus\n"); in saa7164_cmd_dequeue() 147 printk(KERN_ERR "ret = %x\n", ret); in saa7164_cmd_dequeue() 156 printk(KERN_ERR "split response\n"); in saa7164_cmd_dequeue() 160 printk(KERN_ERR " timeout continue\n"); in saa7164_cmd_dequeue() 183 printk(KERN_ERR "%s() !msg\n", __func__); in saa7164_cmd_set() 206 printk(KERN_ERR "%s() set failed %d\n", __func__, ret); in saa7164_cmd_set() 226 printk(KERN_ERR "%s() set last failed %d\n", __func__, ret); in saa7164_cmd_set() 293 printk(KERN_ERR "%s(seqno=%d) seqno is invalid\n", in saa7164_cmd_wait() [all …]
|
| H A D | saa7164-api.c | 30 printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); in saa7164_api_get_load_info() 52 printk(KERN_ERR "%s() error, ret = 0x%x\n", in saa7164_api_collect_debug() 76 printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); in saa7164_api_set_debug() 86 printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); in saa7164_api_set_debug() 108 printk(KERN_ERR "%s() set error, ret = 0x%x\n", __func__, ret); in saa7164_api_set_vbi_format() 114 printk(KERN_ERR "%s() get error, ret = 0x%x\n", __func__, ret); in saa7164_api_set_vbi_format() 124 printk(KERN_ERR "%s() commit error, ret = 0x%x\n", in saa7164_api_set_vbi_format() 130 printk(KERN_ERR "%s() GET commit error, ret = 0x%x\n", in saa7164_api_set_vbi_format() 134 printk(KERN_ERR "%s() memcmp error, ret = 0x%x\n", in saa7164_api_set_vbi_format() 145 printk(KERN_ERR "%s() compare failed\n", __func__); in saa7164_api_set_vbi_format() [all …]
|
| /OK3568_Linux_fs/kernel/drivers/edac/ |
| H A D | mv64x60_edac.c | 39 printk(KERN_ERR "Error in PCI %d Interface\n", pdata->pci_hose); in mv64x60_pci_check() 40 printk(KERN_ERR "Cause register: 0x%08x\n", cause); in mv64x60_pci_check() 41 printk(KERN_ERR "Address Low: 0x%08x\n", in mv64x60_pci_check() 43 printk(KERN_ERR "Address High: 0x%08x\n", in mv64x60_pci_check() 45 printk(KERN_ERR "Attribute: 0x%08x\n", in mv64x60_pci_check() 47 printk(KERN_ERR "Command: 0x%08x\n", in mv64x60_pci_check() 87 printk(KERN_ERR "%s: Unable to get resource for " in mv64x60_pci_fixup() 133 printk(KERN_ERR "%s: Unable to get resource for " in mv64x60_pci_err_probe() 143 printk(KERN_ERR "%s: Error while requesting mem region\n", in mv64x60_pci_err_probe() 153 printk(KERN_ERR "%s: Unable to setup PCI err regs\n", __func__); in mv64x60_pci_err_probe() [all …]
|
| /OK3568_Linux_fs/kernel/drivers/pnp/pnpbios/ |
| H A D | bioscalls.c | 143 printk(KERN_ERR in call_pnp_bios() 145 printk(KERN_ERR in call_pnp_bios() 147 printk(KERN_ERR in call_pnp_bios() 158 printk(KERN_ERR "PnPBIOS: %s: function successful\n", module); in pnpbios_print_status() 161 printk(KERN_ERR "PnPBIOS: %s: unable to set static resources\n", in pnpbios_print_status() 165 printk(KERN_ERR "PnPBIOS: %s: invalid function number passed\n", in pnpbios_print_status() 169 printk(KERN_ERR in pnpbios_print_status() 174 printk(KERN_ERR "PnPBIOS: %s: invalid handle\n", module); in pnpbios_print_status() 177 printk(KERN_ERR "PnPBIOS: %s: invalid parameters were passed\n", in pnpbios_print_status() 181 printk(KERN_ERR "PnPBIOS: %s: unable to set resources\n", in pnpbios_print_status() [all …]
|
| /OK3568_Linux_fs/kernel/fs/ecryptfs/ |
| H A D | keystore.c | 99 ecryptfs_printk(KERN_ERR, "Five-byte packet length not " in ecryptfs_parse_packet_length() 104 ecryptfs_printk(KERN_ERR, "Error parsing packet length\n"); in ecryptfs_parse_packet_length() 166 ecryptfs_printk(KERN_ERR, "Unable to allocate memory\n"); in write_tag_64_packet() 174 ecryptfs_printk(KERN_ERR, "Error generating tag 64 packet " in write_tag_64_packet() 185 ecryptfs_printk(KERN_ERR, "Error generating tag 64 packet " in write_tag_64_packet() 225 ecryptfs_printk(KERN_ERR, "Type should be ECRYPTFS_TAG_65\n"); in parse_tag_65_packet() 230 ecryptfs_printk(KERN_ERR, "Status indicator has non-zero value " in parse_tag_65_packet() 243 ecryptfs_printk(KERN_ERR, "The message received from ecryptfsd " in parse_tag_65_packet() 249 ecryptfs_printk(KERN_ERR, in parse_tag_65_packet() 259 ecryptfs_printk(KERN_ERR, "key_size [%d] larger than " in parse_tag_65_packet() [all …]
|
| /OK3568_Linux_fs/kernel/drivers/vme/ |
| H A D | vme.c | 69 printk(KERN_ERR "Unknown resource type\n"); in find_bridge() 92 printk(KERN_ERR "No resource\n"); in vme_alloc_consistent() 98 printk(KERN_ERR "Can't find bridge\n"); in vme_alloc_consistent() 103 printk(KERN_ERR "Dev entry NULL for bridge %s\n", bridge->name); in vme_alloc_consistent() 108 printk(KERN_ERR "alloc_consistent not supported by bridge %s\n", in vme_alloc_consistent() 132 printk(KERN_ERR "No resource\n"); in vme_free_consistent() 138 printk(KERN_ERR "Can't find bridge\n"); in vme_free_consistent() 143 printk(KERN_ERR "Dev entry NULL for bridge %s\n", bridge->name); in vme_free_consistent() 148 printk(KERN_ERR "free_consistent not supported by bridge %s\n", in vme_free_consistent() 195 printk(KERN_ERR "Unknown resource type\n"); in vme_get_size() [all …]
|
| /OK3568_Linux_fs/kernel/drivers/net/wireless/intersil/orinoco/ |
| H A D | orinoco_nortel.c | 97 printk(KERN_ERR PFX "brg1 answer1 wrong\n"); in orinoco_nortel_hw_init() 110 printk(KERN_ERR PFX "brg1 timed out\n"); in orinoco_nortel_hw_init() 114 printk(KERN_ERR PFX "brg2 answer1 wrong\n"); in orinoco_nortel_hw_init() 118 printk(KERN_ERR PFX "brg2 answer2 wrong\n"); in orinoco_nortel_hw_init() 122 printk(KERN_ERR PFX "brg2 answer3 wrong\n"); in orinoco_nortel_hw_init() 131 printk(KERN_ERR PFX "Error setting COR value (reg=%x)\n", in orinoco_nortel_hw_init() 151 printk(KERN_ERR PFX "Cannot enable PCI device\n"); in orinoco_nortel_init_one() 157 printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); in orinoco_nortel_init_one() 163 printk(KERN_ERR PFX "Cannot map bridge registers\n"); in orinoco_nortel_init_one() 170 printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n"); in orinoco_nortel_init_one() [all …]
|
| H A D | orinoco_plx.c | 133 printk(KERN_ERR PFX "Busy timeout\n"); in orinoco_plx_cor_reset() 157 printk(KERN_ERR PFX "The CIS value of Prism2 PC " in orinoco_plx_hw_init() 172 printk(KERN_ERR PFX "Cannot enable interrupts\n"); in orinoco_plx_hw_init() 190 printk(KERN_ERR PFX "Cannot enable PCI device\n"); in orinoco_plx_init_one() 196 printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); in orinoco_plx_init_one() 202 printk(KERN_ERR PFX "Cannot map bridge registers\n"); in orinoco_plx_init_one() 209 printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n"); in orinoco_plx_init_one() 216 printk(KERN_ERR PFX "Cannot map chipset registers\n"); in orinoco_plx_init_one() 225 printk(KERN_ERR PFX "Cannot allocate network device\n"); in orinoco_plx_init_one() 239 printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); in orinoco_plx_init_one() [all …]
|
| H A D | orinoco_tmd.c | 83 printk(KERN_ERR PFX "Busy timeout\n"); in orinoco_tmd_cor_reset() 101 printk(KERN_ERR PFX "Cannot enable PCI device\n"); in orinoco_tmd_init_one() 107 printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); in orinoco_tmd_init_one() 113 printk(KERN_ERR PFX "Cannot map bridge registers\n"); in orinoco_tmd_init_one() 120 printk(KERN_ERR PFX "Cannot map chipset registers\n"); in orinoco_tmd_init_one() 129 printk(KERN_ERR PFX "Cannot allocate network device\n"); in orinoco_tmd_init_one() 142 printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); in orinoco_tmd_init_one() 149 printk(KERN_ERR PFX "Initial reset failed\n"); in orinoco_tmd_init_one() 155 printk(KERN_ERR PFX "orinoco_init() failed\n"); in orinoco_tmd_init_one() 161 printk(KERN_ERR PFX "orinoco_if_add() failed\n"); in orinoco_tmd_init_one()
|
| /OK3568_Linux_fs/kernel/drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd_indep_power/ |
| H A D | dhd_custom_msm.c | 95 printk(KERN_ERR "%s: Faiiled to request gpio %d for WL_REG_ON\n", in dhd_wifi_init_gpio() 98 printk(KERN_ERR "%s: gpio_request WL_REG_ON done - WLAN_EN: GPIO %d\n", in dhd_wifi_init_gpio() 103 printk(KERN_ERR "%s: WL_REG_ON failed to pull up\n", __FUNCTION__); in dhd_wifi_init_gpio() 105 printk(KERN_ERR "%s: WL_REG_ON is pulled up\n", __FUNCTION__); in dhd_wifi_init_gpio() 123 printk(KERN_ERR "%s: Failed to request gpio %d for WLAN_HOST_WAKE\n", in dhd_wifi_init_gpio() 127 printk(KERN_ERR "%s: gpio_request WLAN_HOST_WAKE done" in dhd_wifi_init_gpio() 154 printk(KERN_ERR "%s: WL_REG_ON is failed to pull up\n", __FUNCTION__); in dhd_wlan_power() 163 printk(KERN_ERR "%s: WL_REG_ON is " in dhd_wlan_power() 169 printk(KERN_ERR "%s: WL_REG_ON is failed to pull up\n", __FUNCTION__); in dhd_wlan_power() 224 printk(KERN_ERR "%s: failed to initiate GPIO, ret=%d\n", in dhd_wlan_init() [all …]
|
| /OK3568_Linux_fs/kernel/sound/isa/opti9xx/ |
| H A D | miro.c | 180 snd_printk(KERN_ERR "aci_busy_wait() time out\n"); in aci_busy_wait() 190 snd_printk(KERN_ERR "aci busy, aci_write(0x%x) stopped.\n", byte); in aci_write() 203 snd_printk(KERN_ERR "aci busy, aci_read() stopped.\n"); in aci_read() 266 snd_printk(KERN_ERR "snd_miro_get_capture() failed: %d\n", in snd_miro_get_capture() 286 snd_printk(KERN_ERR "snd_miro_put_capture() failed: %d\n", in snd_miro_put_capture() 328 snd_printk(KERN_ERR "snd_miro_get_preamp() failed: %d\n", in snd_miro_get_preamp() 348 snd_printk(KERN_ERR "snd_miro_put_preamp() failed: %d\n", in snd_miro_put_preamp() 380 snd_printk(KERN_ERR "snd_miro_put_amp() to %d failed: %d\n", value, error); in snd_miro_put_amp() 436 snd_printk(KERN_ERR "aci_getvalue(%d) failed: %d\n", right_reg, right_val); in snd_miro_get_double() 442 snd_printk(KERN_ERR "aci_getvalue(%d) failed: %d\n", left_reg, left_val); in snd_miro_get_double() [all …]
|
| /OK3568_Linux_fs/external/rkwifibt/drivers/bcmdhd/ |
| H A D | dhd_custom_msm.c | 93 printk(KERN_ERR "%s: Faiiled to request gpio %d for WL_REG_ON\n", in dhd_wifi_init_gpio() 96 printk(KERN_ERR "%s: gpio_request WL_REG_ON done - WLAN_EN: GPIO %d\n", in dhd_wifi_init_gpio() 101 printk(KERN_ERR "%s: WL_REG_ON failed to pull up\n", __FUNCTION__); in dhd_wifi_init_gpio() 103 printk(KERN_ERR "%s: WL_REG_ON is pulled up\n", __FUNCTION__); in dhd_wifi_init_gpio() 121 printk(KERN_ERR "%s: Faiiled to request gpio %d for WLAN_HOST_WAKE\n", in dhd_wifi_init_gpio() 125 printk(KERN_ERR "%s: gpio_request WLAN_HOST_WAKE done" in dhd_wifi_init_gpio() 150 printk(KERN_ERR "%s: WL_REG_ON is failed to pull up\n", __FUNCTION__); in dhd_wlan_power() 159 printk(KERN_ERR "%s: WL_REG_ON is " in dhd_wlan_power() 165 printk(KERN_ERR "%s: WL_REG_ON is failed to pull up\n", __FUNCTION__); in dhd_wlan_power() 234 printk(KERN_ERR "%s: failed to initiate GPIO, ret=%d\n", in dhd_wlan_init() [all …]
|
| /OK3568_Linux_fs/kernel/drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd/ |
| H A D | dhd_custom_msm.c | 93 printk(KERN_ERR "%s: Faiiled to request gpio %d for WL_REG_ON\n", in dhd_wifi_init_gpio() 96 printk(KERN_ERR "%s: gpio_request WL_REG_ON done - WLAN_EN: GPIO %d\n", in dhd_wifi_init_gpio() 101 printk(KERN_ERR "%s: WL_REG_ON failed to pull up\n", __FUNCTION__); in dhd_wifi_init_gpio() 103 printk(KERN_ERR "%s: WL_REG_ON is pulled up\n", __FUNCTION__); in dhd_wifi_init_gpio() 121 printk(KERN_ERR "%s: Faiiled to request gpio %d for WLAN_HOST_WAKE\n", in dhd_wifi_init_gpio() 125 printk(KERN_ERR "%s: gpio_request WLAN_HOST_WAKE done" in dhd_wifi_init_gpio() 150 printk(KERN_ERR "%s: WL_REG_ON is failed to pull up\n", __FUNCTION__); in dhd_wlan_power() 159 printk(KERN_ERR "%s: WL_REG_ON is " in dhd_wlan_power() 165 printk(KERN_ERR "%s: WL_REG_ON is failed to pull up\n", __FUNCTION__); in dhd_wlan_power() 234 printk(KERN_ERR "%s: failed to initiate GPIO, ret=%d\n", in dhd_wlan_init() [all …]
|
| /OK3568_Linux_fs/kernel/drivers/net/wireless/rockchip_wlan/infineon/bcmdhd/ |
| H A D | dhd_custom_msm.c | 121 printk(KERN_ERR "%s: Faiiled to request gpio %d for WL_REG_ON\n", in dhd_wifi_init_gpio() 124 printk(KERN_ERR "%s: gpio_request WL_REG_ON done - WLAN_EN: GPIO %d\n", in dhd_wifi_init_gpio() 129 printk(KERN_ERR "%s: WL_REG_ON failed to pull up\n", __FUNCTION__); in dhd_wifi_init_gpio() 131 printk(KERN_ERR "%s: WL_REG_ON is pulled up\n", __FUNCTION__); in dhd_wifi_init_gpio() 149 printk(KERN_ERR "%s: Faiiled to request gpio %d for WLAN_HOST_WAKE\n", in dhd_wifi_init_gpio() 153 printk(KERN_ERR "%s: gpio_request WLAN_HOST_WAKE done" in dhd_wifi_init_gpio() 181 printk(KERN_ERR "%s: WL_REG_ON is failed to pull up\n", __FUNCTION__); in dhd_wlan_power() 190 printk(KERN_ERR "%s: WL_REG_ON is " in dhd_wlan_power() 196 printk(KERN_ERR "%s: WL_REG_ON is failed to pull up\n", __FUNCTION__); in dhd_wlan_power() 275 printk(KERN_ERR "%s: failed to initiate GPIO, ret=%d\n", in dhd_wlan_init() [all …]
|
| /OK3568_Linux_fs/external/rkwifibt/drivers/infineon/ |
| H A D | dhd_custom_msm.c | 114 printk(KERN_ERR "%s: Faiiled to request gpio %d for WL_REG_ON\n", in dhd_wifi_init_gpio() 117 printk(KERN_ERR "%s: gpio_request WL_REG_ON done - WLAN_EN: GPIO %d\n", in dhd_wifi_init_gpio() 122 printk(KERN_ERR "%s: WL_REG_ON failed to pull up\n", __FUNCTION__); in dhd_wifi_init_gpio() 124 printk(KERN_ERR "%s: WL_REG_ON is pulled up\n", __FUNCTION__); in dhd_wifi_init_gpio() 142 printk(KERN_ERR "%s: Faiiled to request gpio %d for WLAN_HOST_WAKE\n", in dhd_wifi_init_gpio() 146 printk(KERN_ERR "%s: gpio_request WLAN_HOST_WAKE done" in dhd_wifi_init_gpio() 174 printk(KERN_ERR "%s: WL_REG_ON is failed to pull up\n", __FUNCTION__); in dhd_wlan_power() 183 printk(KERN_ERR "%s: WL_REG_ON is " in dhd_wlan_power() 189 printk(KERN_ERR "%s: WL_REG_ON is failed to pull up\n", __FUNCTION__); in dhd_wlan_power() 270 printk(KERN_ERR "%s: failed to initiate GPIO, ret=%d\n", in dhd_wlan_init() [all …]
|
| /OK3568_Linux_fs/kernel/drivers/net/wireless/rockchip_wlan/cywdhd/bcmdhd/ |
| H A D | dhd_custom_msm.c | 121 printk(KERN_ERR "%s: Faiiled to request gpio %d for WL_REG_ON\n", in dhd_wifi_init_gpio() 124 printk(KERN_ERR "%s: gpio_request WL_REG_ON done - WLAN_EN: GPIO %d\n", in dhd_wifi_init_gpio() 129 printk(KERN_ERR "%s: WL_REG_ON failed to pull up\n", __FUNCTION__); in dhd_wifi_init_gpio() 131 printk(KERN_ERR "%s: WL_REG_ON is pulled up\n", __FUNCTION__); in dhd_wifi_init_gpio() 149 printk(KERN_ERR "%s: Faiiled to request gpio %d for WLAN_HOST_WAKE\n", in dhd_wifi_init_gpio() 153 printk(KERN_ERR "%s: gpio_request WLAN_HOST_WAKE done" in dhd_wifi_init_gpio() 181 printk(KERN_ERR "%s: WL_REG_ON is failed to pull up\n", __FUNCTION__); in dhd_wlan_power() 190 printk(KERN_ERR "%s: WL_REG_ON is " in dhd_wlan_power() 196 printk(KERN_ERR "%s: WL_REG_ON is failed to pull up\n", __FUNCTION__); in dhd_wlan_power() 277 printk(KERN_ERR "%s: failed to initiate GPIO, ret=%d\n", in dhd_wlan_init() [all …]
|
| /OK3568_Linux_fs/kernel/arch/powerpc/platforms/cell/ |
| H A D | ras.c | 38 printk(KERN_ERR "Global Checkstop FIR : 0x%016llx\n", in dump_fir() 40 printk(KERN_ERR "Global Recoverable FIR : 0x%016llx\n", in dump_fir() 42 printk(KERN_ERR "Global MachineCheck FIR : 0x%016llx\n", in dump_fir() 47 printk(KERN_ERR "IOC FIR : 0x%016llx\n", in dump_fir() 56 printk(KERN_ERR "System Error Interrupt on CPU %d !\n", cpu); in cbe_system_error_exception() 69 printk(KERN_ERR "Unhandled Maintenance interrupt on CPU %d !\n", cpu); in cbe_maintenance_exception() 81 printk(KERN_ERR "Unhandled Thermal interrupt on CPU %d !\n", cpu); in cbe_thermal_exception() 89 printk(KERN_ERR "Machine Check Interrupt on CPU %d !\n", cpu); in cbe_machine_check_handler() 145 printk(KERN_ERR "%s: error enabling PTCAL on node %d!\n", in cbe_ptcal_enable_on_node() 195 printk(KERN_ERR "%s: node %pOF is missing node-id?\n", in cbe_ptcal_enable() [all …]
|
| /OK3568_Linux_fs/kernel/drivers/net/wireless/rockchip_wlan/rtl8189es/os_dep/linux/ |
| H A D | sdio_ops_linux.c | 70 DBG_871X(KERN_ERR "%s: FAIL!(%d) addr=0x%05x\n", __func__, *err, addr); in sd_f0_read8() 105 DBG_871X(KERN_ERR "%s: FAIL!(%d) addr=0x%05x val=0x%02x\n", __func__, *err, addr, v); in sd_f0_write8() 139 DBG_871X(KERN_ERR "%s: FAIL!(%d) addr=0x%05x\n", __func__, err, addr+i); in _sd_cmd52_read() 217 DBG_871X(KERN_ERR "%s: FAIL!(%d) addr=0x%05x val=0x%02x\n", __func__, err, addr+i, pdata[i]); in _sd_cmd52_write() 290 DBG_871X(KERN_ERR "%s: FAIL!(%d) addr=0x%05x\n", __func__, *err, addr); in _sd_read8() 326 DBG_871X(KERN_ERR "%s: FAIL!(%d) addr=0x%05x\n", __func__, *err, addr); in sd_read8() 362 DBG_871X(KERN_ERR "%s: FAIL!(%d) addr=0x%05x\n", __func__, *err, addr); in sd_read16() 396 DBG_871X(KERN_ERR "%s: (%d) addr=0x%05x, val=0x%x\n", __func__, *err, addr, v); in _sd_read32() 409 DBG_871X(KERN_ERR "%s: (%d) addr=0x%05x, val=0x%x, try_cnt=%d\n", __func__, *err, addr, v, i); in _sd_read32() 424 …DBG_871X(KERN_ERR "%s: FAIL!(%d) addr=0x%05x, val=0x%x, try_cnt=%d\n", __func__, *err, addr, v, i); in _sd_read32() [all …]
|
| /OK3568_Linux_fs/kernel/sound/isa/sb/ |
| H A D | jazz16.c | 87 snd_printk(KERN_ERR "config port region is already in use.\n"); in jazz16_configure_ports() 110 snd_printk(KERN_ERR "I/O port region is already in use.\n"); in jazz16_detect_board() 191 snd_printk(KERN_ERR "please specify port\n"); in snd_jazz16_match() 194 snd_printk(KERN_ERR "incorrect port specified\n"); in snd_jazz16_match() 199 snd_printk(KERN_ERR "dma8 must be 1 or 3\n"); in snd_jazz16_match() 204 snd_printk(KERN_ERR "dma16 must be 5 or 7\n"); in snd_jazz16_match() 209 snd_printk(KERN_ERR "incorrect mpu_port specified\n"); in snd_jazz16_match() 215 snd_printk(KERN_ERR "mpu_irq must be 2, 3, 5 or 7\n"); in snd_jazz16_match() 243 snd_printk(KERN_ERR "unable to find a free IRQ\n"); in snd_jazz16_probe() 252 snd_printk(KERN_ERR "unable to find a free DMA8\n"); in snd_jazz16_probe() [all …]
|
| /OK3568_Linux_fs/kernel/drivers/mtd/ |
| H A D | mtdoops.c | 147 printk(KERN_ERR "mtdoops: all blocks bad!\n"); in mtdoops_workfunc_erase() 153 printk(KERN_ERR "mtdoops: mtd_block_isbad failed, aborting\n"); in mtdoops_workfunc_erase() 169 printk(KERN_ERR "mtdoops: block_markbad failed, aborting\n"); in mtdoops_workfunc_erase() 192 printk(KERN_ERR "mtdoops: Cannot write from panic without panic_write\n"); in mtdoops_write() 200 printk(KERN_ERR "mtdoops: write failure at %ld (%td of %ld written), error %d\n", in mtdoops_write() 232 printk(KERN_ERR "mtdoops: read failure at %ld (%td of %d read), err %d\n", in find_next_position() 304 printk(KERN_ERR "mtdoops: MTD partition %d not big enough for mtdoops\n", in mtdoops_notify_add() 309 printk(KERN_ERR "mtdoops: eraseblock size of MTD partition %d too small\n", in mtdoops_notify_add() 314 printk(KERN_ERR "mtdoops: mtd%d is too large (limit is %d MiB)\n", in mtdoops_notify_add() 325 printk(KERN_ERR "mtdoops: could not allocate page array\n"); in mtdoops_notify_add() [all …]
|
| /OK3568_Linux_fs/kernel/drivers/soc/fsl/qe/ |
| H A D | ucc_fast.c | 147 printk(KERN_ERR "%s: illegal UCC number\n", __func__); in ucc_fast_init() 153 printk(KERN_ERR "%s: max_rx_buf_length not aligned\n", in ucc_fast_init() 160 printk(KERN_ERR "%s: urfs is too small\n", __func__); in ucc_fast_init() 165 printk(KERN_ERR "%s: urfs is not aligned\n", __func__); in ucc_fast_init() 170 printk(KERN_ERR "%s: urfet is not aligned.\n", __func__); in ucc_fast_init() 175 printk(KERN_ERR "%s: urfset is not aligned\n", __func__); in ucc_fast_init() 180 printk(KERN_ERR "%s: utfs is not aligned\n", __func__); in ucc_fast_init() 185 printk(KERN_ERR "%s: utfet is not aligned\n", __func__); in ucc_fast_init() 190 printk(KERN_ERR "%s: utftt is not aligned\n", __func__); in ucc_fast_init() 196 printk(KERN_ERR "%s: Cannot allocate private data\n", in ucc_fast_init() [all …]
|