1 /* 2 * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com> 3 * 4 * Based on dockstar.h originally written by 5 * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu> 6 * 7 * Based on sheevaplug.h originally written by 8 * Prafulla Wadaskar <prafulla@marvell.com> 9 * (C) Copyright 2009 10 * Marvell Semiconductor <www.marvell.com> 11 * 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #ifndef _CONFIG_GOFLEXHOME_H 16 #define _CONFIG_GOFLEXHOME_H 17 18 /* 19 * High Level Configuration Options (easy to change) 20 */ 21 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ 22 #define CONFIG_KW88F6281 1 /* SOC Name */ 23 #define CONFIG_MACH_GOFLEXHOME /* Machine type */ 24 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 25 26 /* 27 * Default GPIO configuration and LED status 28 */ 29 #define GOFLEXHOME_OE_LOW (~(0)) 30 #define GOFLEXHOME_OE_HIGH (~(0)) 31 #define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */ 32 #define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */ 33 34 /* PHY related */ 35 #define MV88E1116_LED_FCTRL_REG 10 36 #define MV88E1116_CPRSP_CR3_REG 21 37 #define MV88E1116_MAC_CTRL_REG 21 38 #define MV88E1116_PGADR_REG 22 39 #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) 40 #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) 41 42 /* 43 * Commands configuration 44 */ 45 46 /* 47 * mv-common.h should be defined after CMD configs since it used them 48 * to enable certain macros 49 */ 50 #include "mv-common.h" 51 52 /* 53 * Environment variables configurations 54 */ 55 #ifdef CONFIG_CMD_NAND 56 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 57 #endif 58 /* 59 * max 4k env size is enough, but in case of nand 60 * it has to be rounded to sector size 61 */ 62 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 63 #define CONFIG_ENV_ADDR 0xC0000 64 #define CONFIG_ENV_OFFSET 0xC0000 /* env starts here */ 65 66 /* 67 * Default environment variables 68 */ 69 #define CONFIG_BOOTCOMMAND \ 70 "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ 71 "ubi part root; " \ 72 "ubifsmount ubi:root; " \ 73 "ubifsload 0x800000 ${kernel}; " \ 74 "bootm 0x800000" 75 76 #define CONFIG_MTDPARTS \ 77 "mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0" 78 79 #define CONFIG_EXTRA_ENV_SETTINGS \ 80 "console=console=ttyS0,115200\0" \ 81 "mtdids=nand0=orion_nand\0" \ 82 "mtdparts="CONFIG_MTDPARTS \ 83 "kernel=/boot/uImage\0" \ 84 "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0" 85 86 /* 87 * Ethernet Driver configuration 88 */ 89 #ifdef CONFIG_CMD_NET 90 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 91 #define CONFIG_PHY_BASE_ADR 0 92 #endif /* CONFIG_CMD_NET */ 93 94 /* 95 * * SATA Driver configuration 96 * */ 97 #ifdef CONFIG_MVSATA_IDE 98 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 99 #endif /*CONFIG_MVSATA_IDE*/ 100 101 /* 102 * * RTC driver configuration 103 * */ 104 #ifdef CONFIG_CMD_DATE 105 #define CONFIG_RTC_MV 106 #endif /* CONFIG_CMD_DATE */ 107 108 #endif /* _CONFIG_GOFLEXHOME_H */ 109