| /rk3399_rockchip-uboot/board/gdsys/common/ |
| H A D | adv7611.h | a3f9d6c7791bbf0ff7fc68d49abcc5b53c6f7e48 Wed Oct 28 10:46:32 UTC 2015 Dirk Eibach <dirk.eibach@gdsys.cc> mpc83xx: Add strider board
The gdsys strider board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.
On board peripherals include:
- 1x 10/100 Mbit/s Ethernet (optional)
- Lattice ECP3 FPGA connected via eLBC
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
[trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| H A D | ioep-fpga.h | a3f9d6c7791bbf0ff7fc68d49abcc5b53c6f7e48 Wed Oct 28 10:46:32 UTC 2015 Dirk Eibach <dirk.eibach@gdsys.cc> mpc83xx: Add strider board
The gdsys strider board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.
On board peripherals include:
- 1x 10/100 Mbit/s Ethernet (optional)
- Lattice ECP3 FPGA connected via eLBC
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
[trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| H A D | ch7301.c | a3f9d6c7791bbf0ff7fc68d49abcc5b53c6f7e48 Wed Oct 28 10:46:32 UTC 2015 Dirk Eibach <dirk.eibach@gdsys.cc> mpc83xx: Add strider board
The gdsys strider board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.
On board peripherals include:
- 1x 10/100 Mbit/s Ethernet (optional)
- Lattice ECP3 FPGA connected via eLBC
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
[trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| H A D | ch7301.h | a3f9d6c7791bbf0ff7fc68d49abcc5b53c6f7e48 Wed Oct 28 10:46:32 UTC 2015 Dirk Eibach <dirk.eibach@gdsys.cc> mpc83xx: Add strider board
The gdsys strider board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.
On board peripherals include:
- 1x 10/100 Mbit/s Ethernet (optional)
- Lattice ECP3 FPGA connected via eLBC
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
[trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| H A D | adv7611.c | a3f9d6c7791bbf0ff7fc68d49abcc5b53c6f7e48 Wed Oct 28 10:46:32 UTC 2015 Dirk Eibach <dirk.eibach@gdsys.cc> mpc83xx: Add strider board
The gdsys strider board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.
On board peripherals include:
- 1x 10/100 Mbit/s Ethernet (optional)
- Lattice ECP3 FPGA connected via eLBC
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
[trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| H A D | ioep-fpga.c | a3f9d6c7791bbf0ff7fc68d49abcc5b53c6f7e48 Wed Oct 28 10:46:32 UTC 2015 Dirk Eibach <dirk.eibach@gdsys.cc> mpc83xx: Add strider board
The gdsys strider board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.
On board peripherals include:
- 1x 10/100 Mbit/s Ethernet (optional)
- Lattice ECP3 FPGA connected via eLBC
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
[trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| H A D | osd.h | a3f9d6c7791bbf0ff7fc68d49abcc5b53c6f7e48 Wed Oct 28 10:46:32 UTC 2015 Dirk Eibach <dirk.eibach@gdsys.cc> mpc83xx: Add strider board
The gdsys strider board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.
On board peripherals include:
- 1x 10/100 Mbit/s Ethernet (optional)
- Lattice ECP3 FPGA connected via eLBC
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
[trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| H A D | osd.c | a3f9d6c7791bbf0ff7fc68d49abcc5b53c6f7e48 Wed Oct 28 10:46:32 UTC 2015 Dirk Eibach <dirk.eibach@gdsys.cc> mpc83xx: Add strider board
The gdsys strider board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.
On board peripherals include:
- 1x 10/100 Mbit/s Ethernet (optional)
- Lattice ECP3 FPGA connected via eLBC
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
[trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| H A D | Makefile | a3f9d6c7791bbf0ff7fc68d49abcc5b53c6f7e48 Wed Oct 28 10:46:32 UTC 2015 Dirk Eibach <dirk.eibach@gdsys.cc> mpc83xx: Add strider board
The gdsys strider board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.
On board peripherals include:
- 1x 10/100 Mbit/s Ethernet (optional)
- Lattice ECP3 FPGA connected via eLBC
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
[trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| /rk3399_rockchip-uboot/board/gdsys/mpc8308/ |
| H A D | Makefile | a3f9d6c7791bbf0ff7fc68d49abcc5b53c6f7e48 Wed Oct 28 10:46:32 UTC 2015 Dirk Eibach <dirk.eibach@gdsys.cc> mpc83xx: Add strider board
The gdsys strider board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.
On board peripherals include:
- 1x 10/100 Mbit/s Ethernet (optional)
- Lattice ECP3 FPGA connected via eLBC
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
[trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| H A D | Kconfig | a3f9d6c7791bbf0ff7fc68d49abcc5b53c6f7e48 Wed Oct 28 10:46:32 UTC 2015 Dirk Eibach <dirk.eibach@gdsys.cc> mpc83xx: Add strider board
The gdsys strider board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.
On board peripherals include:
- 1x 10/100 Mbit/s Ethernet (optional)
- Lattice ECP3 FPGA connected via eLBC
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
[trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| H A D | MAINTAINERS | a3f9d6c7791bbf0ff7fc68d49abcc5b53c6f7e48 Wed Oct 28 10:46:32 UTC 2015 Dirk Eibach <dirk.eibach@gdsys.cc> mpc83xx: Add strider board
The gdsys strider board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.
On board peripherals include:
- 1x 10/100 Mbit/s Ethernet (optional)
- Lattice ECP3 FPGA connected via eLBC
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
[trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| H A D | strider.c | a3f9d6c7791bbf0ff7fc68d49abcc5b53c6f7e48 Wed Oct 28 10:46:32 UTC 2015 Dirk Eibach <dirk.eibach@gdsys.cc> mpc83xx: Add strider board
The gdsys strider board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.
On board peripherals include:
- 1x 10/100 Mbit/s Ethernet (optional)
- Lattice ECP3 FPGA connected via eLBC
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
[trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| /rk3399_rockchip-uboot/configs/ |
| H A D | strider_cpu_defconfig | a3f9d6c7791bbf0ff7fc68d49abcc5b53c6f7e48 Wed Oct 28 10:46:32 UTC 2015 Dirk Eibach <dirk.eibach@gdsys.cc> mpc83xx: Add strider board
The gdsys strider board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.
On board peripherals include:
- 1x 10/100 Mbit/s Ethernet (optional)
- Lattice ECP3 FPGA connected via eLBC
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
[trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| H A D | strider_con_defconfig | a3f9d6c7791bbf0ff7fc68d49abcc5b53c6f7e48 Wed Oct 28 10:46:32 UTC 2015 Dirk Eibach <dirk.eibach@gdsys.cc> mpc83xx: Add strider board
The gdsys strider board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.
On board peripherals include:
- 1x 10/100 Mbit/s Ethernet (optional)
- Lattice ECP3 FPGA connected via eLBC
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
[trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| /rk3399_rockchip-uboot/arch/powerpc/cpu/mpc83xx/ |
| H A D | Kconfig | a3f9d6c7791bbf0ff7fc68d49abcc5b53c6f7e48 Wed Oct 28 10:46:32 UTC 2015 Dirk Eibach <dirk.eibach@gdsys.cc> mpc83xx: Add strider board
The gdsys strider board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.
On board peripherals include:
- 1x 10/100 Mbit/s Ethernet (optional)
- Lattice ECP3 FPGA connected via eLBC
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
[trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| /rk3399_rockchip-uboot/include/ |
| H A D | gdsys_fpga.h | a3f9d6c7791bbf0ff7fc68d49abcc5b53c6f7e48 Wed Oct 28 10:46:32 UTC 2015 Dirk Eibach <dirk.eibach@gdsys.cc> mpc83xx: Add strider board
The gdsys strider board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.
On board peripherals include:
- 1x 10/100 Mbit/s Ethernet (optional)
- Lattice ECP3 FPGA connected via eLBC
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
[trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
| /rk3399_rockchip-uboot/include/configs/ |
| H A D | strider.h | a3f9d6c7791bbf0ff7fc68d49abcc5b53c6f7e48 Wed Oct 28 10:46:32 UTC 2015 Dirk Eibach <dirk.eibach@gdsys.cc> mpc83xx: Add strider board
The gdsys strider board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.
On board peripherals include:
- 1x 10/100 Mbit/s Ethernet (optional)
- Lattice ECP3 FPGA connected via eLBC
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
[trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now]
Signed-off-by: Tom Rini <trini@konsulko.com>
|