| /rk3399_rockchip-uboot/board/beckhoff/mx53cx9020/ |
| H A D | imximage.cfg | 98d62e618bb9475eee799b7095803285ecf3a5ae Fri Nov 04 10:57:02 UTC 2016 Patrick Bruenn <p.bruenn@beckhoff.com> arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.
The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
|
| H A D | mx53cx9020_video.c | 98d62e618bb9475eee799b7095803285ecf3a5ae Fri Nov 04 10:57:02 UTC 2016 Patrick Bruenn <p.bruenn@beckhoff.com> arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.
The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
|
| H A D | Makefile | 98d62e618bb9475eee799b7095803285ecf3a5ae Fri Nov 04 10:57:02 UTC 2016 Patrick Bruenn <p.bruenn@beckhoff.com> arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.
The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
|
| H A D | MAINTAINERS | 98d62e618bb9475eee799b7095803285ecf3a5ae Fri Nov 04 10:57:02 UTC 2016 Patrick Bruenn <p.bruenn@beckhoff.com> arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.
The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
|
| H A D | Kconfig | 98d62e618bb9475eee799b7095803285ecf3a5ae Fri Nov 04 10:57:02 UTC 2016 Patrick Bruenn <p.bruenn@beckhoff.com> arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.
The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
|
| H A D | mx53cx9020.c | 98d62e618bb9475eee799b7095803285ecf3a5ae Fri Nov 04 10:57:02 UTC 2016 Patrick Bruenn <p.bruenn@beckhoff.com> arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.
The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
|
| /rk3399_rockchip-uboot/arch/arm/dts/ |
| H A D | imx53.dtsi | 98d62e618bb9475eee799b7095803285ecf3a5ae Fri Nov 04 10:57:02 UTC 2016 Patrick Bruenn <p.bruenn@beckhoff.com> arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.
The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
|
| H A D | imx53-pinfunc.h | 98d62e618bb9475eee799b7095803285ecf3a5ae Fri Nov 04 10:57:02 UTC 2016 Patrick Bruenn <p.bruenn@beckhoff.com> arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.
The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
|
| H A D | imx53-cx9020.dts | 98d62e618bb9475eee799b7095803285ecf3a5ae Fri Nov 04 10:57:02 UTC 2016 Patrick Bruenn <p.bruenn@beckhoff.com> arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.
The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
|
| H A D | Makefile | 98d62e618bb9475eee799b7095803285ecf3a5ae Fri Nov 04 10:57:02 UTC 2016 Patrick Bruenn <p.bruenn@beckhoff.com> arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.
The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
|
| /rk3399_rockchip-uboot/include/dt-bindings/clock/ |
| H A D | imx5-clock.h | 98d62e618bb9475eee799b7095803285ecf3a5ae Fri Nov 04 10:57:02 UTC 2016 Patrick Bruenn <p.bruenn@beckhoff.com> arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.
The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
|
| /rk3399_rockchip-uboot/drivers/pinctrl/nxp/ |
| H A D | pinctrl-imx5.c | 98d62e618bb9475eee799b7095803285ecf3a5ae Fri Nov 04 10:57:02 UTC 2016 Patrick Bruenn <p.bruenn@beckhoff.com> arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.
The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
|
| H A D | Kconfig | 98d62e618bb9475eee799b7095803285ecf3a5ae Fri Nov 04 10:57:02 UTC 2016 Patrick Bruenn <p.bruenn@beckhoff.com> arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.
The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
|
| H A D | Makefile | 98d62e618bb9475eee799b7095803285ecf3a5ae Fri Nov 04 10:57:02 UTC 2016 Patrick Bruenn <p.bruenn@beckhoff.com> arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.
The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
|
| /rk3399_rockchip-uboot/drivers/fpga/ |
| H A D | Kconfig | 98d62e618bb9475eee799b7095803285ecf3a5ae Fri Nov 04 10:57:02 UTC 2016 Patrick Bruenn <p.bruenn@beckhoff.com> arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.
The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
|
| /rk3399_rockchip-uboot/configs/ |
| H A D | mx53cx9020_defconfig | 98d62e618bb9475eee799b7095803285ecf3a5ae Fri Nov 04 10:57:02 UTC 2016 Patrick Bruenn <p.bruenn@beckhoff.com> arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.
The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
|
| /rk3399_rockchip-uboot/include/configs/ |
| H A D | mx53cx9020.h | 98d62e618bb9475eee799b7095803285ecf3a5ae Fri Nov 04 10:57:02 UTC 2016 Patrick Bruenn <p.bruenn@beckhoff.com> arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.
The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
|
| /rk3399_rockchip-uboot/drivers/net/ |
| H A D | Kconfig | 98d62e618bb9475eee799b7095803285ecf3a5ae Fri Nov 04 10:57:02 UTC 2016 Patrick Bruenn <p.bruenn@beckhoff.com> arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.
The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
|
| /rk3399_rockchip-uboot/drivers/serial/ |
| H A D | Kconfig | 98d62e618bb9475eee799b7095803285ecf3a5ae Fri Nov 04 10:57:02 UTC 2016 Patrick Bruenn <p.bruenn@beckhoff.com> arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.
The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
|