| /rk3399_ARM-atf/include/lib/el3_runtime/ |
| H A D | context_el1.h | 19d52a83b755cdf6d9b7defc7eb821eb62e80310 Fri Aug 09 16:04:22 UTC 2024 Andre Przywara <andre.przywara@arm.com> feat(cpufeat): add ENABLE_FEAT_LS64_ACCDATA
Armv8.6 introduced the FEAT_LS64 extension, which provides a 64 *byte*
store instruction. A related instruction is ST64BV0, which will replace
the lowest 32 bits of the data with a value taken from the ACCDATA_EL1
system register (so that EL0 cannot alter them).
Using that ST64BV0 instruction and accessing the ACCDATA_EL1 system
register is guarded by two SCR_EL3 bits, which we should set to avoid a
trap into EL3, when lower ELs use one of those.
Add the required bits and pieces to make this feature usable:
- Add the ENABLE_FEAT_LS64_ACCDATA build option (defaulting to 0).
- Add the CPUID and SCR_EL3 bit definitions associated with FEAT_LS64.
- Add a feature check to check for the existing four variants of the
LS64 feature and detect future extensions.
- Add code to save and restore the ACCDATA_EL1 register on
secure/non-secure context switches.
- Enable the feature with runtime detection for FVP and Arm FPGA.
Please note that the *basic* FEAT_LS64 feature does not feature any trap
bits, it's only the addition of the ACCDATA_EL1 system register that
adds these traps and the SCR_EL3 bits.
Change-Id: Ie3e2ca2d9c4fbbd45c0cc6089accbb825579138a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
|
| /rk3399_ARM-atf/include/arch/aarch32/ |
| H A D | arch_features.h | 19d52a83b755cdf6d9b7defc7eb821eb62e80310 Fri Aug 09 16:04:22 UTC 2024 Andre Przywara <andre.przywara@arm.com> feat(cpufeat): add ENABLE_FEAT_LS64_ACCDATA
Armv8.6 introduced the FEAT_LS64 extension, which provides a 64 *byte*
store instruction. A related instruction is ST64BV0, which will replace
the lowest 32 bits of the data with a value taken from the ACCDATA_EL1
system register (so that EL0 cannot alter them).
Using that ST64BV0 instruction and accessing the ACCDATA_EL1 system
register is guarded by two SCR_EL3 bits, which we should set to avoid a
trap into EL3, when lower ELs use one of those.
Add the required bits and pieces to make this feature usable:
- Add the ENABLE_FEAT_LS64_ACCDATA build option (defaulting to 0).
- Add the CPUID and SCR_EL3 bit definitions associated with FEAT_LS64.
- Add a feature check to check for the existing four variants of the
LS64 feature and detect future extensions.
- Add code to save and restore the ACCDATA_EL1 register on
secure/non-secure context switches.
- Enable the feature with runtime detection for FVP and Arm FPGA.
Please note that the *basic* FEAT_LS64 feature does not feature any trap
bits, it's only the addition of the ACCDATA_EL1 system register that
adds these traps and the SCR_EL3 bits.
Change-Id: Ie3e2ca2d9c4fbbd45c0cc6089accbb825579138a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
|
| /rk3399_ARM-atf/plat/arm/board/arm_fpga/ |
| H A D | platform.mk | 19d52a83b755cdf6d9b7defc7eb821eb62e80310 Fri Aug 09 16:04:22 UTC 2024 Andre Przywara <andre.przywara@arm.com> feat(cpufeat): add ENABLE_FEAT_LS64_ACCDATA
Armv8.6 introduced the FEAT_LS64 extension, which provides a 64 *byte*
store instruction. A related instruction is ST64BV0, which will replace
the lowest 32 bits of the data with a value taken from the ACCDATA_EL1
system register (so that EL0 cannot alter them).
Using that ST64BV0 instruction and accessing the ACCDATA_EL1 system
register is guarded by two SCR_EL3 bits, which we should set to avoid a
trap into EL3, when lower ELs use one of those.
Add the required bits and pieces to make this feature usable:
- Add the ENABLE_FEAT_LS64_ACCDATA build option (defaulting to 0).
- Add the CPUID and SCR_EL3 bit definitions associated with FEAT_LS64.
- Add a feature check to check for the existing four variants of the
LS64 feature and detect future extensions.
- Add code to save and restore the ACCDATA_EL1 register on
secure/non-secure context switches.
- Enable the feature with runtime detection for FVP and Arm FPGA.
Please note that the *basic* FEAT_LS64 feature does not feature any trap
bits, it's only the addition of the ACCDATA_EL1 system register that
adds these traps and the SCR_EL3 bits.
Change-Id: Ie3e2ca2d9c4fbbd45c0cc6089accbb825579138a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
|
| /rk3399_ARM-atf/make_helpers/ |
| H A D | arch_features.mk | 19d52a83b755cdf6d9b7defc7eb821eb62e80310 Fri Aug 09 16:04:22 UTC 2024 Andre Przywara <andre.przywara@arm.com> feat(cpufeat): add ENABLE_FEAT_LS64_ACCDATA
Armv8.6 introduced the FEAT_LS64 extension, which provides a 64 *byte*
store instruction. A related instruction is ST64BV0, which will replace
the lowest 32 bits of the data with a value taken from the ACCDATA_EL1
system register (so that EL0 cannot alter them).
Using that ST64BV0 instruction and accessing the ACCDATA_EL1 system
register is guarded by two SCR_EL3 bits, which we should set to avoid a
trap into EL3, when lower ELs use one of those.
Add the required bits and pieces to make this feature usable:
- Add the ENABLE_FEAT_LS64_ACCDATA build option (defaulting to 0).
- Add the CPUID and SCR_EL3 bit definitions associated with FEAT_LS64.
- Add a feature check to check for the existing four variants of the
LS64 feature and detect future extensions.
- Add code to save and restore the ACCDATA_EL1 register on
secure/non-secure context switches.
- Enable the feature with runtime detection for FVP and Arm FPGA.
Please note that the *basic* FEAT_LS64 feature does not feature any trap
bits, it's only the addition of the ACCDATA_EL1 system register that
adds these traps and the SCR_EL3 bits.
Change-Id: Ie3e2ca2d9c4fbbd45c0cc6089accbb825579138a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
|
| /rk3399_ARM-atf/common/ |
| H A D | feat_detect.c | 19d52a83b755cdf6d9b7defc7eb821eb62e80310 Fri Aug 09 16:04:22 UTC 2024 Andre Przywara <andre.przywara@arm.com> feat(cpufeat): add ENABLE_FEAT_LS64_ACCDATA
Armv8.6 introduced the FEAT_LS64 extension, which provides a 64 *byte*
store instruction. A related instruction is ST64BV0, which will replace
the lowest 32 bits of the data with a value taken from the ACCDATA_EL1
system register (so that EL0 cannot alter them).
Using that ST64BV0 instruction and accessing the ACCDATA_EL1 system
register is guarded by two SCR_EL3 bits, which we should set to avoid a
trap into EL3, when lower ELs use one of those.
Add the required bits and pieces to make this feature usable:
- Add the ENABLE_FEAT_LS64_ACCDATA build option (defaulting to 0).
- Add the CPUID and SCR_EL3 bit definitions associated with FEAT_LS64.
- Add a feature check to check for the existing four variants of the
LS64 feature and detect future extensions.
- Add code to save and restore the ACCDATA_EL1 register on
secure/non-secure context switches.
- Enable the feature with runtime detection for FVP and Arm FPGA.
Please note that the *basic* FEAT_LS64 feature does not feature any trap
bits, it's only the addition of the ACCDATA_EL1 system register that
adds these traps and the SCR_EL3 bits.
Change-Id: Ie3e2ca2d9c4fbbd45c0cc6089accbb825579138a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
|
| /rk3399_ARM-atf/include/arch/aarch64/ |
| H A D | arch_helpers.h | 19d52a83b755cdf6d9b7defc7eb821eb62e80310 Fri Aug 09 16:04:22 UTC 2024 Andre Przywara <andre.przywara@arm.com> feat(cpufeat): add ENABLE_FEAT_LS64_ACCDATA
Armv8.6 introduced the FEAT_LS64 extension, which provides a 64 *byte*
store instruction. A related instruction is ST64BV0, which will replace
the lowest 32 bits of the data with a value taken from the ACCDATA_EL1
system register (so that EL0 cannot alter them).
Using that ST64BV0 instruction and accessing the ACCDATA_EL1 system
register is guarded by two SCR_EL3 bits, which we should set to avoid a
trap into EL3, when lower ELs use one of those.
Add the required bits and pieces to make this feature usable:
- Add the ENABLE_FEAT_LS64_ACCDATA build option (defaulting to 0).
- Add the CPUID and SCR_EL3 bit definitions associated with FEAT_LS64.
- Add a feature check to check for the existing four variants of the
LS64 feature and detect future extensions.
- Add code to save and restore the ACCDATA_EL1 register on
secure/non-secure context switches.
- Enable the feature with runtime detection for FVP and Arm FPGA.
Please note that the *basic* FEAT_LS64 feature does not feature any trap
bits, it's only the addition of the ACCDATA_EL1 system register that
adds these traps and the SCR_EL3 bits.
Change-Id: Ie3e2ca2d9c4fbbd45c0cc6089accbb825579138a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
|
| H A D | arch_features.h | 19d52a83b755cdf6d9b7defc7eb821eb62e80310 Fri Aug 09 16:04:22 UTC 2024 Andre Przywara <andre.przywara@arm.com> feat(cpufeat): add ENABLE_FEAT_LS64_ACCDATA
Armv8.6 introduced the FEAT_LS64 extension, which provides a 64 *byte*
store instruction. A related instruction is ST64BV0, which will replace
the lowest 32 bits of the data with a value taken from the ACCDATA_EL1
system register (so that EL0 cannot alter them).
Using that ST64BV0 instruction and accessing the ACCDATA_EL1 system
register is guarded by two SCR_EL3 bits, which we should set to avoid a
trap into EL3, when lower ELs use one of those.
Add the required bits and pieces to make this feature usable:
- Add the ENABLE_FEAT_LS64_ACCDATA build option (defaulting to 0).
- Add the CPUID and SCR_EL3 bit definitions associated with FEAT_LS64.
- Add a feature check to check for the existing four variants of the
LS64 feature and detect future extensions.
- Add code to save and restore the ACCDATA_EL1 register on
secure/non-secure context switches.
- Enable the feature with runtime detection for FVP and Arm FPGA.
Please note that the *basic* FEAT_LS64 feature does not feature any trap
bits, it's only the addition of the ACCDATA_EL1 system register that
adds these traps and the SCR_EL3 bits.
Change-Id: Ie3e2ca2d9c4fbbd45c0cc6089accbb825579138a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
|
| H A D | arch.h | 19d52a83b755cdf6d9b7defc7eb821eb62e80310 Fri Aug 09 16:04:22 UTC 2024 Andre Przywara <andre.przywara@arm.com> feat(cpufeat): add ENABLE_FEAT_LS64_ACCDATA
Armv8.6 introduced the FEAT_LS64 extension, which provides a 64 *byte*
store instruction. A related instruction is ST64BV0, which will replace
the lowest 32 bits of the data with a value taken from the ACCDATA_EL1
system register (so that EL0 cannot alter them).
Using that ST64BV0 instruction and accessing the ACCDATA_EL1 system
register is guarded by two SCR_EL3 bits, which we should set to avoid a
trap into EL3, when lower ELs use one of those.
Add the required bits and pieces to make this feature usable:
- Add the ENABLE_FEAT_LS64_ACCDATA build option (defaulting to 0).
- Add the CPUID and SCR_EL3 bit definitions associated with FEAT_LS64.
- Add a feature check to check for the existing four variants of the
LS64 feature and detect future extensions.
- Add code to save and restore the ACCDATA_EL1 register on
secure/non-secure context switches.
- Enable the feature with runtime detection for FVP and Arm FPGA.
Please note that the *basic* FEAT_LS64 feature does not feature any trap
bits, it's only the addition of the ACCDATA_EL1 system register that
adds these traps and the SCR_EL3 bits.
Change-Id: Ie3e2ca2d9c4fbbd45c0cc6089accbb825579138a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
|
| /rk3399_ARM-atf/lib/el3_runtime/aarch64/ |
| H A D | context_mgmt.c | 19d52a83b755cdf6d9b7defc7eb821eb62e80310 Fri Aug 09 16:04:22 UTC 2024 Andre Przywara <andre.przywara@arm.com> feat(cpufeat): add ENABLE_FEAT_LS64_ACCDATA
Armv8.6 introduced the FEAT_LS64 extension, which provides a 64 *byte*
store instruction. A related instruction is ST64BV0, which will replace
the lowest 32 bits of the data with a value taken from the ACCDATA_EL1
system register (so that EL0 cannot alter them).
Using that ST64BV0 instruction and accessing the ACCDATA_EL1 system
register is guarded by two SCR_EL3 bits, which we should set to avoid a
trap into EL3, when lower ELs use one of those.
Add the required bits and pieces to make this feature usable:
- Add the ENABLE_FEAT_LS64_ACCDATA build option (defaulting to 0).
- Add the CPUID and SCR_EL3 bit definitions associated with FEAT_LS64.
- Add a feature check to check for the existing four variants of the
LS64 feature and detect future extensions.
- Add code to save and restore the ACCDATA_EL1 register on
secure/non-secure context switches.
- Enable the feature with runtime detection for FVP and Arm FPGA.
Please note that the *basic* FEAT_LS64 feature does not feature any trap
bits, it's only the addition of the ACCDATA_EL1 system register that
adds these traps and the SCR_EL3 bits.
Change-Id: Ie3e2ca2d9c4fbbd45c0cc6089accbb825579138a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
|
| /rk3399_ARM-atf/docs/getting_started/ |
| H A D | build-options.rst | 19d52a83b755cdf6d9b7defc7eb821eb62e80310 Fri Aug 09 16:04:22 UTC 2024 Andre Przywara <andre.przywara@arm.com> feat(cpufeat): add ENABLE_FEAT_LS64_ACCDATA
Armv8.6 introduced the FEAT_LS64 extension, which provides a 64 *byte*
store instruction. A related instruction is ST64BV0, which will replace
the lowest 32 bits of the data with a value taken from the ACCDATA_EL1
system register (so that EL0 cannot alter them).
Using that ST64BV0 instruction and accessing the ACCDATA_EL1 system
register is guarded by two SCR_EL3 bits, which we should set to avoid a
trap into EL3, when lower ELs use one of those.
Add the required bits and pieces to make this feature usable:
- Add the ENABLE_FEAT_LS64_ACCDATA build option (defaulting to 0).
- Add the CPUID and SCR_EL3 bit definitions associated with FEAT_LS64.
- Add a feature check to check for the existing four variants of the
LS64 feature and detect future extensions.
- Add code to save and restore the ACCDATA_EL1 register on
secure/non-secure context switches.
- Enable the feature with runtime detection for FVP and Arm FPGA.
Please note that the *basic* FEAT_LS64 feature does not feature any trap
bits, it's only the addition of the ACCDATA_EL1 system register that
adds these traps and the SCR_EL3 bits.
Change-Id: Ie3e2ca2d9c4fbbd45c0cc6089accbb825579138a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
|
| /rk3399_ARM-atf/plat/arm/board/fvp/ |
| H A D | platform.mk | 19d52a83b755cdf6d9b7defc7eb821eb62e80310 Fri Aug 09 16:04:22 UTC 2024 Andre Przywara <andre.przywara@arm.com> feat(cpufeat): add ENABLE_FEAT_LS64_ACCDATA
Armv8.6 introduced the FEAT_LS64 extension, which provides a 64 *byte*
store instruction. A related instruction is ST64BV0, which will replace
the lowest 32 bits of the data with a value taken from the ACCDATA_EL1
system register (so that EL0 cannot alter them).
Using that ST64BV0 instruction and accessing the ACCDATA_EL1 system
register is guarded by two SCR_EL3 bits, which we should set to avoid a
trap into EL3, when lower ELs use one of those.
Add the required bits and pieces to make this feature usable:
- Add the ENABLE_FEAT_LS64_ACCDATA build option (defaulting to 0).
- Add the CPUID and SCR_EL3 bit definitions associated with FEAT_LS64.
- Add a feature check to check for the existing four variants of the
LS64 feature and detect future extensions.
- Add code to save and restore the ACCDATA_EL1 register on
secure/non-secure context switches.
- Enable the feature with runtime detection for FVP and Arm FPGA.
Please note that the *basic* FEAT_LS64 feature does not feature any trap
bits, it's only the addition of the ACCDATA_EL1 system register that
adds these traps and the SCR_EL3 bits.
Change-Id: Ie3e2ca2d9c4fbbd45c0cc6089accbb825579138a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
|
| /rk3399_ARM-atf/ |
| H A D | Makefile | 19d52a83b755cdf6d9b7defc7eb821eb62e80310 Fri Aug 09 16:04:22 UTC 2024 Andre Przywara <andre.przywara@arm.com> feat(cpufeat): add ENABLE_FEAT_LS64_ACCDATA
Armv8.6 introduced the FEAT_LS64 extension, which provides a 64 *byte*
store instruction. A related instruction is ST64BV0, which will replace
the lowest 32 bits of the data with a value taken from the ACCDATA_EL1
system register (so that EL0 cannot alter them).
Using that ST64BV0 instruction and accessing the ACCDATA_EL1 system
register is guarded by two SCR_EL3 bits, which we should set to avoid a
trap into EL3, when lower ELs use one of those.
Add the required bits and pieces to make this feature usable:
- Add the ENABLE_FEAT_LS64_ACCDATA build option (defaulting to 0).
- Add the CPUID and SCR_EL3 bit definitions associated with FEAT_LS64.
- Add a feature check to check for the existing four variants of the
LS64 feature and detect future extensions.
- Add code to save and restore the ACCDATA_EL1 register on
secure/non-secure context switches.
- Enable the feature with runtime detection for FVP and Arm FPGA.
Please note that the *basic* FEAT_LS64 feature does not feature any trap
bits, it's only the addition of the ACCDATA_EL1 system register that
adds these traps and the SCR_EL3 bits.
Change-Id: Ie3e2ca2d9c4fbbd45c0cc6089accbb825579138a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
|