| /OK3568_Linux_fs/kernel/arch/arm/boot/dts/ |
| H A D | gemini-nas4220b.dts | 110 pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV";
114 pins = "Y7 GMAC0 RXC", "Y11 GMAC1 RXC";
118 pins = "T8 GMAC0 TXEN", "W11 GMAC1 TXEN";
122 pins = "U8 GMAC0 TXC";
131 pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
132 "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
133 "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
134 "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
141 /* Set up drive strength on GMAC0 to 16 mA */
|
| H A D | gemini-sq201.dts | 185 pins = "V8 GMAC0 RXDV";
189 pins = "Y7 GMAC0 RXC";
193 pins = "T8 GMAC0 TXEN";
197 pins = "U8 GMAC0 TXC";
218 pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
219 "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
220 "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
221 "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
228 /* Set up drive strength on GMAC0 and GMAC1 to 16 mA */
|
| H A D | gemini-dlink-dns-313.dts | 228 pins = "R8 GMAC0 RXDV", "U11 GMAC1 RXDV";
232 pins = "T8 GMAC0 RXC";
240 pins = "P8 GMAC0 TXEN", "V11 GMAC1 TXEN";
244 pins = "V7 GMAC0 TXC", "P10 GMAC1 TXC";
249 pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1",
250 "P9 GMAC0 RXD2", "R9 GMAC0 RXD3",
258 pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1",
259 "R7 GMAC0 TXD2", "P7 GMAC0 TXD3";
262 /* Set up drive strength on GMAC0 to 16 mA */
|
| H A D | gemini-sl93512r.dts | 205 pins = "V7 GMAC0 TXC";
209 pins = "P8 GMAC0 TXEN";
213 pins = "T8 GMAC0 RXC";
217 pins = "R8 GMAC0 RXDV";
222 pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1",
223 "P9 GMAC0 RXD2", "R9 GMAC0 RXD3",
232 pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1",
233 "R7 GMAC0 TXD2", "P7 GMAC0 TXD3";
|
| H A D | gemini-dlink-dir-685.dts | 239 ethernet = <&gmac0>;
401 pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV",
402 "Y7 GMAC0 RXC", "Y11 GMAC1 RXC",
403 "T8 GMAC0 TXEN", "W11 GMAC1 TXEN",
404 "U8 GMAC0 TXC", "V11 GMAC1 TXC",
405 "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
406 "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
407 "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
408 "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
415 /* Set up drive strength on GMAC0 to 16 mA */
|
| H A D | qcom-ipq8064-rb3011.dts | 11 ethernet0 = &gmac0;
58 ethernet = <&gmac0>;
219 &gmac0 {
|
| H A D | socfpga_cyclone5_mcvevk.dts | 13 ethernet0 = &gmac0;
30 &gmac0 {
|
| H A D | bcm53015-meraki-mr26.dts | 62 &gmac0 {
127 ethernet = <&gmac0>;
|
| H A D | socfpga_arria10_socdk.dtsi | 12 ethernet0 = &gmac0;
69 &gmac0 {
|
| /OK3568_Linux_fs/u-boot/arch/arm/dts/ |
| H A D | rk3588-vccio3-pinctrl.dtsi | 55 gmac0 {
56 gmac0_miim: gmac0-miim {
64 gmac0_clkinout: gmac0-clkinout {
70 gmac0_rx_bus2: gmac0-rx-bus2 {
80 gmac0_tx_bus2: gmac0-tx-bus2 {
90 gmac0_rgmii_clk: gmac0-rgmii-clk {
98 gmac0_rgmii_bus: gmac0-rgmii-bus {
110 gmac0_ppsclk: gmac0-ppsclk {
116 gmac0_ppstring: gmac0-ppstring {
122 gmac0_ptp_refclk: gmac0-ptp-refclk {
[all …]
|
| H A D | socfpga_cyclone5_mcvevk.dts | 18 ethernet0 = &gmac0;
33 &gmac0 {
|
| H A D | rk3568-pinctrl.dtsi | 453 gmac0 {
454 gmac0_miim: gmac0-miim {
461 gmac0_clkinout: gmac0-clkinout {
466 gmac0_rx_er: gmac0-rx-er {
471 gmac0_rx_bus2: gmac0-rx-bus2 {
480 gmac0_tx_bus2: gmac0-tx-bus2 {
489 gmac0_rgmii_clk: gmac0-rgmii-clk {
496 gmac0_rgmii_bus: gmac0-rgmii-bus {
2176 gmac0_tx_bus2_level3: gmac0-tx-bus2-level3 {
2185 gmac0_rgmii_bus_level3: gmac0-rgmii-bus-level3 {
[all …]
|
| /OK3568_Linux_fs/kernel/arch/arm64/boot/dts/rockchip/ |
| H A D | rk3588-vccio3-pinctrl.dtsi | 60 gmac0 {
62 gmac0_miim: gmac0-miim {
71 gmac0_clkinout: gmac0-clkinout {
78 gmac0_rx_bus2: gmac0-rx-bus2 {
89 gmac0_tx_bus2: gmac0-tx-bus2 {
100 gmac0_rgmii_clk: gmac0-rgmii-clk {
109 gmac0_rgmii_bus: gmac0-rgmii-bus {
122 gmac0_ppsclk: gmac0-ppsclk {
129 gmac0_ppstring: gmac0-ppstring {
136 gmac0_ptp_refclk: gmac0-ptp-refclk {
[all …]
|
| H A D | rk3562-evb1-lp4x-v10-sii9022-rgb2hdmi.dts | 26 * The pins of gmac0 and rgb are multiplexed
28 &gmac0 {
|
| H A D | rk3562-evb1-lp4x-v10-rgb2lvds.dts | 72 * The pins of gmac0 and rgb are multiplexed
74 &gmac0 {
|
| H A D | rk3562-evb1-lp4x-v10-rgb-FX070-DHM11BOE-A.dts | 70 * The pins of gmac0/pcie2x1/pdm_codec and rgb are multiplexed
72 &gmac0 {
|
| /OK3568_Linux_fs/kernel/drivers/pinctrl/ |
| H A D | pinctrl-gemini.c | 403 PINCTRL_PIN(240, "P7 GMAC0 TXD3"),
404 PINCTRL_PIN(241, "P8 GMAC0 TXEN"),
405 PINCTRL_PIN(242, "P9 GMAC0 RXD2"),
422 PINCTRL_PIN(258, "R7 GMAC0 TXD2"),
423 PINCTRL_PIN(259, "R8 GMAC0 RXDV"),
424 PINCTRL_PIN(260, "R9 GMAC0 RXD3"),
441 PINCTRL_PIN(276, "T7 GMAC0 TXD1"),
442 PINCTRL_PIN(277, "T8 GMAC0 RXC"),
443 PINCTRL_PIN(278, "T9 GMAC0 CRS"),
460 PINCTRL_PIN(294, "U7 GMAC0 TXD0"),
[all …]
|
| /OK3568_Linux_fs/kernel/drivers/net/ethernet/cortina/ |
| H A D | gemini.h | 333 * GMAC0 offset 0x8000
367 * GMAC0 offset 0x8004
387 * GMAC0 offset 0x8008
411 * GMAC0 offset 0x8040
435 * GMAC0 offset 0x8044
475 * GMAC0 offset 0x8048
484 * GMAC0 offset 0x804C
516 * GMAC0 offset 0x8060
582 * GMAC0 offset 0x8064
596 * GMAC0 offset 0x8068
[all …]
|
| /OK3568_Linux_fs/external/dpdk/gmac/kernel5.10/ |
| H A D | kernel_dts.diff | 17 /delete-node/ &gmac0;
47 + rockchip,ethernet = <&gmac0>;
51 gmac0: ethernet@fe2a0000 {
|
| /OK3568_Linux_fs/external/dpdk/gmac/kernel4.19/ |
| H A D | kernel_dts.diff | 17 /delete-node/ &gmac0;
47 + rockchip,ethernet = <&gmac0>;
51 gmac0: ethernet@fe2a0000 {
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/net/dsa/ |
| H A D | mt7530.txt | 128 ethernet = <&gmac0>;
142 gmac0: mac@0 {
215 ethernet = <&gmac0>;
232 gmac0: mac@0 {
303 ethernet = <&gmac0>;
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/edac/ |
| H A D | socfpga-eccmgr.txt | 164 altr,ecc-parent = <&gmac0>;
172 altr,ecc-parent = <&gmac0>;
331 altr,ecc-parent = <&gmac0>;
338 altr,ecc-parent = <&gmac0>;
|
| /OK3568_Linux_fs/kernel/arch/arm64/boot/dts/intel/ |
| H A D | socfpga_agilex_socdk.dts | 12 ethernet0 = &gmac0;
58 &gmac0 {
|
| /OK3568_Linux_fs/kernel/drivers/net/dsa/qca/ |
| H A D | ar9331.c | 24 * GMAC0---------------RMII--------------------/ \-CFG_SW_PHY_ADDR_SWAP
27 * GMAC0 and MAC5 are connected together and use same PHY. Depending on
28 * configuration it can be PHY4 (default) or PHY0. Only GMAC0 or MAC5 can be
29 * used at same time. If GMAC0 is used (default) then MAC5 should be disabled.
32 * PHY4 is connected to GMAC0/MAC5 bundle and PHY0 is connected to MAC1. If this
33 * bit is set, PHY4 is connected to MAC1 and PHY0 is connected to GMAC0/MAC5
|
| /OK3568_Linux_fs/kernel/arch/arm64/boot/dts/altera/ |
| H A D | socfpga_stratix10_socdk.dts | 13 ethernet0 = &gmac0;
77 &gmac0 {
|