Searched full:cards (Results 1 – 25 of 1506) sorted by relevance
12345678910>>...61
8 tristate "AV7110 cards"22 Support for SAA7146 and AV7110 based DVB cards as produced25 This driver only supports the fullfeatured cards with55 tristate "SAA7146 DVB cards (aka Budget, Nova-PCI)"60 Support for simple SAA7146 based DVB cards61 (so called Budget- or Nova-PCI cards) without onboard65 tristate "Budget cards"81 Support for simple SAA7146 based DVB cards (so called Budget-82 or Nova-PCI cards) without onboard MPEG2 decoder, and without91 tristate "Budget cards with onboard CI connector"[all …]
... lib-1.2.7.2/src/control/cards.c alsa-lib-1.2.7.2/ ...
14 A driver for 802.11b wireless cards based on the "Hermes" or16 majority of the PCMCIA 802.11b cards (which are nearly all rebadges)17 - except for the Cisco/Aironet cards. Cards supported include the26 Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below.68 the BCM43xx driver for Airport Extreme cards.74 Enable support for PCMCIA cards supported by the "Hermes" (aka78 802.11b PCMCIA cards can be used in desktop machines. The Netgear85 Enable support for PCMCIA cards supported by the "Hermes" (aka89 802.11b PCMCIA cards can be used in desktop machines.95 Enable support for PCMCIA cards supported by the "Hermes" (aka[all …]
16 If you want to support the WaveTable functionality on cards such as22 too. "Debug detection" will add checks for the detection of cards.25 (if the card supports ISA PnP). You don't need to configure the cards134 Default: enabled, for PCI and ISA PnP cards139 Module for AdLib FM cards.144 This module supports multiple cards. It does not support autoprobe, so145 the port must be specified. For actual AdLib FM cards it will be 0x388.173 Module for sound cards based on Analog Devices AD1816A/AD1815 ISA chips.178 This module supports multiple cards, autoprobe and PnP.183 Module for sound cards based on AD1848/AD1847/CS4248 ISA chips.[all …]
10 Say Y here if you want to attach PCMCIA- or PC-cards to your Linux11 computer. These are credit-card size devices such as network cards,13 actually two varieties of these cards: 16 bit PCMCIA and 32 bit14 CardBus cards.26 This option enables support for 16-bit PCMCIA cards. Most older27 PC-cards are such 16-bit PCMCIA cards, so unless you know you're28 only using 32-bit CardBus cards, say Y or M here.30 To use 16-bit PCMCIA cards, you will need supporting software in45 Some PCMCIA cards require an updated Card Information Structure (CIS)58 CardBus is a bus mastering architecture for PC-cards, which allows[all …]
8 tristate "Support for HFC PCI cards"12 Enable support for cards with Cologne Chip AG's16 tristate "Support for HFC multiport cards (HFC-4S/8S/E1)"20 Enable support for cards with Cologne Chip AG's HFC multiport49 Enable support for AVMs FRITZ!CARD PCI cards61 tristate "Support for cards with Infineon chipset"66 Enable support for cards with ISAC + HSCX, IPAC or IPAC-SX70 tristate "Support for cards with Winbond 6692"74 Enable support for Winbond 6692 PCI chip based cards.77 tristate "Support for NETJet cards"[all …]
4 How to get the bt8xx cards working18 This class of cards has a bt878a as the PCI interface, and require the bttv driver21 Please see :doc:`bttv-cardlist` for a complete list of Cards based on the40 cards, you should also do::73 - Old TV cards without EEPROMs, sharing a common PCI subsystem ID;74 - Old TwinHan DST cards or clones with or without CA slot and not103 The autodetected values are determined by the cards' "response string".110 Running multiple cards131 When you have multiple cards, the order of the card ID should133 that removing/inserting other PCI cards may change the detection[all …]
50 The current supported PCI/PCIe cards (not including staging drivers) are60 bt878 DVB/ATSC Support for bt878 based TV cards68 dm1105 SDMC DM1105 based PCI cards70 dvb-ttpci AV7110 cards71 earth-pt1 PT1 cards72 earth-pt3 Earthsoft PT3 cards75 hopper HOPPER based cards79 mantis MANTIS based cards84 pluto2 Pluto2 cards87 smipcie SMI PCIe DVBSky cards[all …]
26 tristate "DVB/ATSC Support for bt878 based TV cards"37 Support for PCI cards based on the Bt8xx PCI bridge. Examples are38 the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards,39 the pcHDTV HD2000 cards, the DViCO FusionHDTV Lite cards, and40 some AVerMedia cards.42 Since these cards have no MPEG decoder onboard, they transmit
134 Enable support for Advantech PCL-726 and compatible ISA cards.169 A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards179 Enable support for Advantech PCL-814 and PCL-816 ISA cards189 Enable support for Advantech PCL-818 ISA cards199 Enable support for Advantech PCM-3724 PC/104 cards.235 Enable support for Analog Devices RTI-800/815 ISA cards243 Enable support for Analog Devices RTI-802 ISA cards251 Enable support for Keithley Metrabyte DAC02 compatible ISA cards.261 Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.271 and compatible ISA and PC/104 cards:[all …]
6 Support for CAN cards from Softing Gmbh & some cards8 Softing Gmbh CAN cards come with 1 or 2 physical buses.9 Those cards typically use Dual Port RAM to communicate11 and PCMCIA cards. This driver operates on a platform device,20 tristate "Softing Gmbh CAN pcmcia cards"24 Support for PCMCIA cards from Softing Gmbh & some cards
10 questions about these cards. If you say Y, you will be asked for23 A driver 802.11b wireless cards based on the Atmel fast-vnet26 Many cards based on this chipset do not have flash memory34 tristate "Atmel at76c506 PCI cards"37 Enable support for PCI and mini-PCI cards containing the41 tristate "Atmel at76c502/at76c504 PCMCIA cards"47 Enable support for PCMCIA cards containing the51 tristate "Atmel at76c503/at76c505/at76c505a USB cards"
15 the questions about National Semiconductor 8390 cards. If you say Y,25 (PC-card) Fast Ethernet card to your computer. These cards are77 If you have an Acorn system with one of these network cards, you81 tristate "Macintosh NS 8390 based ethernet cards"86 Ethernet cards using an NS8390 chipset or its equivalent, say Y.108 Many Ethernet cards without a specific driver are compatible with122 This driver is for NE2000 compatible PCI cards. It will not work123 with ISA NE2000 cards (they have their own driver, "NE2000/NE1000127 This driver also works for the following NE2000 clone cards:162 Support for cards based on the National Semiconductor DP83902AV[all …]
10 questions about these cards. If you say Y, you will be asked for16 tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"25 PCI 802.11 wireless cards.26 It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X37 tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"47 802.11 wireless cards. This driver is the same as the Aironet49 It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X53 802.11b cards.
11 that there are 2 main types of cards and all other cards are14 become more clear exactly what cards are supported.16 Right now these cards are known to work with the COPS driver. The17 LT-200 cards work in a somewhat more limited capacity than the18 DL200 cards, which work very well and are in use by many people.27 Other cards possibly supported mode unknown though:41 To load multiple COPS driver Localtalk cards you can do one of the following::69 * For multiple cards, Ethernet and LocalTalk::74 * For multiple LocalTalk cards, and an Ethernet card.
10 This selects the "Tulip" family of EISA/PCI network cards.20 cards and also works with cards based on the DECchip21 21040 (Tulip series) chips. Some LinkSys PCI cards are24 cards, below. However, most people with a network card of this type48 cards and also works with cards based on the DECchip 49 21140 (Tulip series) chips. Some LinkSys PCI cards are52 cards, above. However, most people with a network card of this type113 This is support for the DIGITAL series of PCI/EISA Ethernet cards.138 This driver is for DM9102(A)/DM9132/DM9801 compatible PCI cards from
14 CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche21 This driver is for the one or two channel CPC-CARD cards from35 tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"38 This driver is for the PCIcanx and PCIcan cards (1, 2 or42 tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards"45 This driver is for the PCAN-PCI/PCIe/miniPCI cards50 bool "PEAK PCAN-ExpressCard Cards"71 tristate "PLX90xx PCI-bridge based Cards"74 This driver is for CAN interface cards based on
37 * Some MMC cards experience performance degradation with CMD2340 * - Certain Toshiba cards.42 * N.B. This doesn't affect SD cards.56 * Some SD cards lockup while using CMD23 multiblock transfers.66 * Some MMC cards need longer data read timeout than indicated in CSD.105 * Some SD cards reports discard support while they don't115 * Certain Hynix eMMC 4.41 cards might get broken when HPI feature116 * is used so disable the HPI feature for such buggy cards.121 * Certain Micron (Numonyx) eMMC 4.5 cards might get broken when HPI122 * feature is used so disable the HPI feature for such buggy cards.
4 DEC EtherWORKS Ethernet De4x5 cards8 Corporation series of EtherWORKS Ethernet cards:16 but it will now attempt to support all cards which conform to the26 So far the driver is known to work with the following cards:37 DE434, DE435 and DE500 cards and benchmarked with 'ttcp': it transferred99 Should you have a need to restrict the driver to DIGITAL only cards, you124 all cards running the dc2114x series chips in particular. Cards using130 (quad 21041 MAC) cards also appear to work despite their incorrectly133 I have added a temporary fix for interrupt problems when some SCSI cards134 share the same interrupt as the DECchip based cards. The problem occurs[all …]
17 Connect-IB cards by Mellanox Technologies.27 Build support for the Innova family of network cards by Mellanox28 Technologies. Innova network cards are comprised of a ConnectX chip131 Build IPsec support for the Innova family of network cards by Mellanox132 Technologies. Innova network cards are comprised of a ConnectX chip145 Build IPsec support for the Connect-X family of network cards by Mellanox172 Build TLS support for the Innova family of network cards by Mellanox173 Technologies. Innova network cards are comprised of a ConnectX chip188 Build TLS support for the Connect-X family of network cards by Mellanox
19 If you have one of those cards and wish to use it under Linux,47 V.36 interface) to your Linux box. The cards can work as the52 the firmware to the cards and to set them up. Look at the55 details about the cards and the driver itself.174 Driver for PCI200SYN cards by Goramo sp. j.188 Driver for wanXL PCI cards by SBE Inc.211 Alternative driver for PC300 RSV/X21 PCI cards made by224 Driver for RISCom/N2 single or dual channel ISA cards by230 Note that N2csu and N2dds cards are not supported by this driver.241 Driver for C101 SuperSync ISA cards by Moxa Technologies Co., Ltd.[all …]
25 expansion cards in your Amiga that conform to the Amiga27 expansion cards that do not fit in the Zorro slots but fit in e.g.36 600. If you intend to use pcmcia cards say Y; otherwise say N.54 operate ISA cards on Atari. Only 8 bit cards are supported, and57 driver for RTL8019AS based NE2000 compatible network cards.
35 Supports ATM cards based on the Efficient Networks "Lanai"184 25 and for 155 Mbps, including IDT cards and the Fore ForeRunnerLE195 found in most 155Mbps NICStAR based ATM cards, namely in the196 ForeRunner LE155 cards. This driver provides detection of cable~206 Support for the PHYsical layer chip in ForeRunner LE25 cards. In254 here if you have one of these cards.276 This is a driver for the Horizon chipset ATM adapter cards once278 named horizon) here if you have one of these cards.300 This is a driver for the Interphase (i)ChipSAR adapter cards306 for more info about the cards. Say Y (or M to compile as a module[all …]
12 TV cards.23 Conexant 2388x based TV cards using ALSA.38 This adds support for MPEG encoder cards based on the46 tristate "DVB/ATSC Support for cx2388x based TV cards"69 This adds support for DVB/ATSC cards based on the80 This adds DVB-T support for cards based on the
59 /* Qlogic Cards only exist at 0x230 or 0x330 (the chip itself in __qlogicfas_detect()60 * decodes the address - I check 230 first since MIDI cards are in __qlogicfas_detect()63 * Theoretically, two Qlogic cards can coexist in the same system. in __qlogicfas_detect()137 static struct qlogicfas408_priv *cards; variable158 priv->next = cards; in qlogicfas_detect()159 cards = priv; in qlogicfas_detect()202 /* no cards found */ in qlogicfas_init()203 printk(KERN_INFO "%s: no cards were found, please specify " in qlogicfas_init()216 for (priv = cards; priv != NULL; priv = priv->next) in qlogicfas_exit()