Home
last modified time | relevance | path

Searched +full:64 +full:kb (Results 1 – 25 of 1054) sorted by relevance

12345678910>>...43

/OK3568_Linux_fs/u-boot/board/freescale/t102xrdb/
H A DREADME4 combines two or one 64-bit Power Architecture e5500 core respectively with high
14 - two e5500 cores, each with a private 256 KB L2 cache
15 - Up to 1.4 GHz with 64-bit ISA support (Power Architecture v2.06-compliant)
19 - 256 KB shared L3 CoreNet platform cache (CPC)
24 - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support
71 DDR: 64-bit 32-bit
82 - Supports 64-bit 4GB DDR3L DIMM
96 - On-board 64MB SPI flash
104 - T1023 SoC integrating two 64-bit e5500 cores up to 1.4GHz
117 - eSPI: 64MB S25FL512SAGMFI010 Spansion SPI flash.
[all …]
/OK3568_Linux_fs/u-boot/board/freescale/t1040qds/
H A DREADME8 The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA
14 - Four e5500 cores, each with a private 256 KB L2 cache
15 - 256 KB shared L3 CoreNet platform cache (CPC)
17 - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving
99 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - FPGA 4KB
100 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB
102 0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB
103 0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB
104 0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB
105 0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB
[all …]
/OK3568_Linux_fs/u-boot/board/freescale/t208xrdb/
H A DREADME12 - Four dual-threads 64-bit Power architecture e6500 cores, up to 1.8GHz
13 - 2MB L2 cache and 512KB CoreNet platform cache (CPC)
15 - One 32-/64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving
80 - On-board 64MB SPI flash
89 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB
90 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB
92 0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB
93 0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB
94 0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB
95 0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB
[all …]
/OK3568_Linux_fs/u-boot/board/freescale/t208xqds/
H A DREADME12 - Four dual-threads 64-bit Power architecture e6500 cores, up to 1.8GHz
13 - 2MB L2 cache and 512KB CoreNet platform cache (CPC)
15 - One 32-/64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving
52 - T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz
69 - Three SPI flash (16MB N25Q128A + 16MB EN25S64 + 512KB SST25WF040)
124 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB
125 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB
127 0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB
128 0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB
129 0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB
[all …]
/OK3568_Linux_fs/kernel/arch/x86/pci/
H A Dce4100.c45 #define KB (1024) macro
106 DEFINE_REG(2, 1, 0x10, (64*KB), reg_init, reg_read, reg_write)
107 DEFINE_REG(3, 0, 0x10, (64*KB), reg_init, reg_read, reg_write)
108 DEFINE_REG(4, 0, 0x10, (128*KB), reg_init, reg_read, reg_write)
109 DEFINE_REG(4, 1, 0x10, (128*KB), reg_init, reg_read, reg_write)
110 DEFINE_REG(6, 0, 0x10, (512*KB), reg_init, reg_read, reg_write)
111 DEFINE_REG(6, 1, 0x10, (512*KB), reg_init, reg_read, reg_write)
112 DEFINE_REG(6, 2, 0x10, (64*KB), reg_init, reg_read, reg_write)
114 DEFINE_REG(8, 1, 0x10, (64*KB), reg_init, reg_read, reg_write)
115 DEFINE_REG(8, 2, 0x10, (64*KB), reg_init, reg_read, reg_write)
[all …]
/OK3568_Linux_fs/u-boot/board/freescale/t104xrdb/
H A DREADME39 The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA
45 - Four e5500 cores, each with a private 256 KB L2 cache
46 - 256 KB shared L3 CoreNet platform cache (CPC)
48 - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving
124 - On-board 64MB SPI flash
158 - On-board 64MB SPI flash
168 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB
169 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB
171 0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB
172 0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB
[all …]
/OK3568_Linux_fs/u-boot/board/freescale/t102xqds/
H A DREADME4 combines two or one 64-bit Power Architecture e5500 core respectively with high
14 - two e5500 cores, each with a private 256 KB L2 cache
15 - Up to 1.4 GHz with 64-bit ISA support (Power Architecture v2.06-compliant)
19 - 256 KB shared L3 CoreNet platform cache (CPC)
24 - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support
71 DDR: 64-bit 32-bit
114 - Switch selectable to one of 16 common settings in the interval of 64 MHz-166 MHz.
155 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - FPGA 4KB
156 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB
158 0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB
[all …]
/OK3568_Linux_fs/kernel/arch/sh/mm/
H A DKconfig23 range 9 64 if PAGE_SIZE_16KB
25 range 7 64 if PAGE_SIZE_64KB
27 range 11 64
41 The page size is not necessarily 4KB. Keep this in mind when
167 bool "4kB"
172 bool "8kB"
175 This enables 8kB pages as supported by SH-X2 and later MMUs.
178 bool "16kB"
181 This enables 16kB pages on MMU-less SH systems.
184 bool "64kB"
[all …]
/OK3568_Linux_fs/kernel/arch/ia64/
H A DKconfig62 The Itanium Processor Family is Intel's 64-bit successor to
63 the 32-bit X86 line. The IA-64 Linux project has a home
67 config 64BIT
130 Select your IA-64 processor type. The default is Itanium.
131 This choice is safe for all IA-64 systems, but may not perform
146 bool "4KB"
148 This lets you select the page size of the kernel. For best IA-64
149 performance, a page size of 8KB or 16KB is recommended. For best
150 IA-32 compatibility, a page size of 4KB should be selected (the vast
152 size). For Itanium 2 or newer systems, a page size of 64KB can also
[all …]
/OK3568_Linux_fs/kernel/arch/parisc/
H A DKconfig4 select ARCH_32BIT_OFF_T if !64BIT
32 select GENERIC_ATOMIC64 if !64BIT
87 default "arch/parisc/configs/generic-32bit_defconfig" if !64BIT
88 default "arch/parisc/configs/generic-64bit_defconfig" if 64BIT
138 default 3 if 64BIT && PARISC_PAGE_SIZE_4KB
159 Specifying "PA8000" here will allow you to select a 64-bit kernel
166 712, 715/64, 715/80, 715/100, 715/100XC, 725/100, 743, 748,
226 config 64BIT
227 bool "64-bit kernel"
230 Enable this if you want to support 64bit kernel on PA-RISC platform.
[all …]
/OK3568_Linux_fs/kernel/Documentation/admin-guide/cgroup-v1/
H A Dhugetlb.rst33 For a system supporting three hugepage sizes (64k, 32M and 1G), the control
44 hugetlb.64KB.limit_in_bytes
45 hugetlb.64KB.max_usage_in_bytes
46 hugetlb.64KB.usage_in_bytes
47 hugetlb.64KB.failcnt
48 hugetlb.64KB.rsvd.limit_in_bytes
49 hugetlb.64KB.rsvd.max_usage_in_bytes
50 hugetlb.64KB.rsvd.usage_in_bytes
51 hugetlb.64KB.rsvd.failcnt
/OK3568_Linux_fs/u-boot/doc/
H A DREADME.N121311 - 32/64/128/256 BTB.
23 - 32/64/128-entry 4-way set-associati.ve main TLB.
27 - 4KB & 1MB.
28 - 8KB & 1MB.
33 - Cache size: 8KB/16KB/32KB/64KB.
38 - Size: 4KB to 1MB.
H A DREADME.b4860qds90 - 2 KB internal memory space including
173 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - FPGA 4 KB
175 0xF_FF80_0000 0xF_FF80_FFFF IFC NAND Flash 64 KB
179 0xF_F800_0000 0xF_F800_FFFF PCIe I/O Space 64 KB
182 0xF_F000_0000 0xF_F3FF_FFFF Free 64 MB
203 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - FPGA 4 KB
205 0xF_FF80_0000 0xF_FF80_FFFF IFC NAND Flash 64 KB
209 0xF_F800_0000 0xF_F800_FFFF PCIe I/O Space 64 KB
212 0xF_F000_0000 0xF_F3FF_FFFF Free 64 MB
230 0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB
[all …]
/OK3568_Linux_fs/u-boot/board/freescale/ls1046ardb/
H A DREADME27 - 8GB 64bits DDR4 SDRAM. Support rates of up to 2133MT/s
34 - DSPI: 64 MB high-speed flash Memory for boot code and storage (up to 108MHz)
46 0x00_1000_0000 - 0x00_1000_FFFF OCRAM0 64KB
47 0x00_1001_0000 - 0x00_1001_FFFF OCRAM1 64KB
49 0x00_7E80_0000 - 0x00_7E80_FFFF IFC - NAND Flash 64KB
50 0x00_7FB0_0000 - 0x00_7FB0_0FFF IFC - CPLD 4KB
67 0x00_4090_0000 - 0x00_4093_FFFF FMan ucode 256KB
68 0x00_4094_0000 - 0x00_4097_FFFF QE/uQE firmware 256KB
/OK3568_Linux_fs/u-boot/arch/x86/
H A DKconfig8 prompt "Run U-Boot in 32/64-bit mode"
12 even on 64-bit machines. In this case SPL is not used, and U-Boot
15 Alternatively it can be run as a 64-bit binary, thus requiring a
16 64-bit machine. In this case SPL runs in 32-bit mode (via 16-bit
17 start-up) then jumps to U-Boot in 64-bit mode.
19 For now, 32-bit mode is recommended, as 64-bit is still
27 64-bit machines. When booting a 64-bit kernel, U-Boot will switch
28 to 64-bit just before starting the kernel. Only the bottom 4GB of
33 bool "64-bit"
39 Build U-Boot as a 64-bit binary with a 32-bit SPL. This is
[all …]
/OK3568_Linux_fs/kernel/Documentation/arm64/
H A Dmemory.rst9 tables with a 4KB page size and up to 3 levels with a 64KB page size.
12 with the 4KB page configuration, allowing 39-bit (512GB) or 48-bit
14 64KB pages, only 2 levels of translation tables, allowing 42-bit (4TB)
18 only available when running with a 64KB page size and expands the
29 AArch64 Linux memory layout with 4KB pages + 4 levels (48-bit)::
40 fffffdfffe5f9000 fffffdfffe9fffff 4124KB fixed mappings
48 AArch64 Linux memory layout with 64KB pages + 3 levels (52-bit with HW support)::
60 fffffc1ffe590000 fffffc1ffe9fffff 4544KB fixed mappings
68 Translation table lookup with 4KB pages::
83 Translation table lookup with 64KB pages::
[all …]
/OK3568_Linux_fs/kernel/lib/lz4/
H A Dlz4hc_compress.c65 hc4->nextToUpdate = 64 * KB; in LZ4HC_init()
66 hc4->base = start - 64 * KB; in LZ4HC_init()
68 hc4->dictBase = start - 64 * KB; in LZ4HC_init()
69 hc4->dictLimit = 64 * KB; in LZ4HC_init()
70 hc4->lowLimit = 64 * KB; in LZ4HC_init()
111 const U32 lowLimit = (hc4->lowLimit + 64 * KB > (U32)(ip - base)) in LZ4HC_InsertAndFindBestMatch()
113 : (U32)(ip - base) - (64 * KB - 1); in LZ4HC_InsertAndFindBestMatch()
183 const U32 lowLimit = (hc4->lowLimit + 64 * KB > (U32)(ip - base)) in LZ4HC_InsertAndGetWiderMatch()
185 : (U32)(ip - base) - (64 * KB - 1); in LZ4HC_InsertAndGetWiderMatch()
593 * for pointers (32 or 64 bits) in LZ4_compress_HC_extStateHC()
[all …]
H A Dlz4_compress.c43 static const int LZ4_64Klimit = ((64 * KB) + (MFLIMIT - 1));
71 return (U32)(((sequence << 24) * prime5bytes) >> (64 - hashLog)); in LZ4_hash5()
75 return (U32)(((sequence >> 24) * prime8bytes) >> (64 - hashLog)); in LZ4_hash5()
230 /* Size too large (not within 64K limit) */ in LZ4_compress_generic()
555 /* Size too large (not within 64K limit) */ in LZ4_compress_destSize_generic()
795 if ((dictEnd - p) > 64 * KB) in LZ4_loadDict()
796 p = dictEnd - 64 * KB; in LZ4_loadDict()
797 dict->currentOffset += 64 * KB; in LZ4_loadDict()
819 U32 const delta = LZ4_dict->currentOffset - 64 * KB; in LZ4_renormDictT()
829 LZ4_dict->currentOffset = 64 * KB; in LZ4_renormDictT()
[all …]
/OK3568_Linux_fs/u-boot/include/configs/
H A Dxtfpga.h45 * LX60 0x04000000 64 MB
62 /* Lx60 can only map 128kb memory (instead of 256kb) when running under OCD */
64 # define CONFIG_SYS_MONITOR_LEN 0x00020000 /* 128KB */
66 # define CONFIG_SYS_MONITOR_LEN 0x00040000 /* 256KB */
69 #define CONFIG_SYS_MALLOC_LEN (256 << 10) /* heap 256KB */
72 #define CONFIG_SYS_BOOTPARAMS_LEN (64 << 10)
164 * Bit 7 maps the first 128KB of ROM address space at CONFIG_SYS_ROM_BASE to
212 # define CONFIG_SYS_FLASH_SECT_SZ 0x10000 /* block size 64KB */
213 # define CONFIG_SYS_FLASH_PARMSECT_SZ 0x2000 /* param size 8KB */
218 # define CONFIG_SYS_FLASH_SECT_SZ 0x20000 /* block size 128KB */
[all …]
/OK3568_Linux_fs/kernel/drivers/w1/slaves/
H A DKconfig15 tristate "Simple 64bit memory family implementation"
18 simple 64bit memory rom(ds2401/ds2411/ds1990*) to your wire.
74 organized as 7 pages of 16 bytes each with 64bit
86 tristate "1kb EEPROM family support (DS2431)"
89 1kb EEPROM family device (DS2431)
92 tristate "4kb EEPROM family support (DS2433)"
95 4kb EEPROM family device (DS2433).
113 tristate "512b/1kb/16kb EPROM family support"
117 512b/1kb/16kb EPROM family device (DS250x).
151 4kb EEPROM with PIO family device (DS28E04).
/OK3568_Linux_fs/kernel/Documentation/translations/zh_CN/arm64/
H A Dmemory.txt33 页大小为 4KB 的 4 级转换表和页大小为 64KB 的 3 级转换表。
35 AArch64 Linux 使用 3 级或 4 级转换表，其页大小配置为 4KB，对于用户和内核
37 对于页大小为 64KB的配置，仅使用 2 级转换表，有 42-bit (4TB) 的虚拟地址空间，但内存布局相同。
45 AArch64 Linux 在页大小为 4KB，并使用 3 级转换表时的内存布局：
53 AArch64 Linux 在页大小为 4KB，并使用 4 级转换表时的内存布局：
61 AArch64 Linux 在页大小为 64KB，并使用 2 级转换表时的内存布局：
69 AArch64 Linux 在页大小为 64KB，并使用 3 级转换表时的内存布局：
80 4KB 页大小的转换表查找：
95 64KB 页大小的转换表查找：
/OK3568_Linux_fs/kernel/arch/powerpc/include/asm/book3s/64/
H A Dhash-4k.h5 #define H_PTE_INDEX_SIZE 9 // size: 8B << 9 = 4KB, maps: 2^9 x 4KB = 2MB
6 #define H_PMD_INDEX_SIZE 7 // size: 8B << 7 = 1KB, maps: 2^7 x 2MB = 256MB
7 #define H_PUD_INDEX_SIZE 9 // size: 8B << 9 = 4KB, maps: 2^9 x 256MB = 128GB
8 #define H_PGD_INDEX_SIZE 9 // size: 8B << 9 = 4KB, maps: 2^9 x 128GB = 64TB
11 * Each context is 512TB. But on 4k we restrict our max TASK size to 64TB
12 * Hence also limit max EA bits to 64TB.
18 * Our page table limit us to 64TB. For 64TB physical memory, we only need 64GB
93 * 4K PTE format is different from 64K PTE format. Saving the hash_slot is just
94 * a matter of returning the PTE bits that need to be modified. On 64K PTE,
/OK3568_Linux_fs/kernel/tools/testing/selftests/tc-testing/tc-tests/actions/
H A Dpolice.json20 "matchPattern": "action order [0-9]*: police 0x1 rate 1Kbit burst 10Kb",
69 "matchPattern": "action order [0-9]*: police 0x62 rate 90Kbit burst 10Kb mtu 1Kb",
90 …"cmdUnderTest": "$TC actions add action police rate 90kbit burst 10k mtu 2kb peakrate 100kbit inde…
93 …"matchPattern": "action order [0-9]*: police 0x3 rate 90Kbit burst 10Kb mtu 2Kb peakrate 100Kbit",
114 … "cmdUnderTest": "$TC actions add action police rate 5kbit burst 6kb peakrate 10kbit index 9",
117 "matchPattern": "action order [0-9]*: police 0x9 rate 5Kb burst 10Kb",
138 "cmdUnderTest": "$TC actions add action police rate 1mbit burst 100k overhead 64 index 64",
140 "verifyCmd": "$TC actions get action police index 64",
141 … "action order [0-9]*: police 0x40 rate 1Mbit burst 100Kb mtu 2Kb action reclassify overhead 64b",
165 …"matchPattern": "action order [0-9]*: police 0x8 rate 2Mbit burst 200Kb mtu 2Kb action reclassify…
[all …]
/OK3568_Linux_fs/kernel/include/linux/
H A Dlz4.h53 * (examples : 10 -> 1KB; 12 -> 4KB ; 16 -> 64KB; 20 -> 1MB; etc.)
56 * Default value is 14, for 16KB, which nicely fits into Intel x86 L1 cache
374 * Return : dictionary size, in bytes (necessarily <= 64 KB)
392 * blocks (up to 64 KB) remain read-accessible while
394 * which can be smaller than 64 KB.
463 * Return : dictionary size, in bytes (necessarily <= 64 KB)
536 * where they were decoded (up to 64 KB)
541 * including very small ones ( < 64 KB).
547 * including small ones ( < 64 KB).
548 * - _At least_ 64 KB + 8 bytes + maxBlockSize.
[all …]
/OK3568_Linux_fs/buildroot/arch/
H A DConfig.in.arc22 bool "ARC HS38 with 64-bit mpy"
25 MMU, caches and 64-bit multiplier.
98 The following options are available for MMU v3 and v4: 4kB,
99 8kB and 16 kB.
101 The default is 8 kB (that really matches the only page size
107 bool "4KB"
111 bool "8KB"
117 bool "16KB"

12345678910>>...43