| /OK3568_Linux_fs/kernel/arch/m68k/fpsp040/ |
| H A D | stan.S | 27 | k = N mod 2, so in particular, k = 0 or 1. 62 BOUNDS1: .long 0x3FD78000,0x4004BC7E 63 TWOBYPI: .long 0x3FE45F30,0x6DC9C883 65 TANQ4: .long 0x3EA0B759,0xF50F8688 66 TANP3: .long 0xBEF2BAA5,0xA8924F04 68 TANQ3: .long 0xBF346F59,0xB39BA65F,0x00000000,0x00000000 70 TANP2: .long 0x3FF60000,0xE073D3FC,0x199C4A00,0x00000000 72 TANQ2: .long 0x3FF90000,0xD23CD684,0x15D95FA1,0x00000000 74 TANP1: .long 0xBFFC0000,0x8895A6C5,0xFB423BCA,0x00000000 76 TANQ1: .long 0xBFFD0000,0xEEF57E0D,0xA84BC8CE,0x00000000 [all …]
|
| H A D | get_op.S | 9 | determines the opclass (0, 2, or 3) and branches to the 17 | - For unnormalized numbers (opclass 0, 2, or 3) the 23 | - For denormalized numbers (opclass 0 or 2) the number(s) is not 71 .long 0x40000000,0xc90fdaa2,0x2168c235 |pi 73 .long 0x40000000,0xc90fdaa2,0x2168c234 |pi 75 .long 0x40000000,0xc90fdaa2,0x2168c235 |pi 79 .long 0x3ffd0000,0x9a209a84,0xfbcff798 |log10(2) 80 .long 0x40000000,0xadf85458,0xa2bb4a9a |e 81 .long 0x3fff0000,0xb8aa3b29,0x5c17f0bc |log2(e) 82 .long 0x3ffd0000,0xde5bd8a9,0x37287195 |log10(e) [all …]
|
| /OK3568_Linux_fs/u-boot/include/configs/ |
| H A D | astro_mcf5373l.h | 29 #define ASTRO_ID 0xF8 31 #define ASTRO_ID 0xFA 33 #define ASTRO_ID 0xF9 35 #define ASTRO_ID 0xFC 37 #define ASTRO_ID 0xFB 53 #define CONFIG_SYS_TEXT_BASE 0x40020000 54 #define ENABLE_JFFS 0 56 #define CONFIG_SYS_TEXT_BASE 0x00000000 73 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 74 #define CONFIG_SYS_FSL_I2C_OFFSET 0x58000 [all …]
|
| /OK3568_Linux_fs/buildroot/board/qemu/m68k-mcf5208/ |
| H A D | linux.config | 10 CONFIG_RAMBASE=0x40000000 11 CONFIG_RAMSIZE=0x0 12 CONFIG_VECTORBASE=0x40000000 13 CONFIG_KERNELBASE=0x40020000
|
| /OK3568_Linux_fs/kernel/arch/m68k/configs/ |
| H A D | m5208evb_defconfig | 15 CONFIG_RAMBASE=0x40000000 16 CONFIG_RAMSIZE=0x2000000 17 CONFIG_VECTORBASE=0x40000000 18 CONFIG_KERNELBASE=0x40020000
|
| /OK3568_Linux_fs/u-boot/arch/arm/include/asm/arch-tegra/ |
| H A D | tegra.h | 11 #define NV_PA_ARM_PERIPHBASE 0x50040000 12 #define NV_PA_PG_UP_BASE 0x60000000 13 #define NV_PA_TMRUS_BASE 0x60005010 14 #define NV_PA_CLK_RST_BASE 0x60006000 15 #define NV_PA_FLOW_BASE 0x60007000 16 #define NV_PA_GPIO_BASE 0x6000D000 17 #define NV_PA_EVP_BASE 0x6000F000 18 #define NV_PA_APB_MISC_BASE 0x70000000 19 #define NV_PA_APB_MISC_GP_BASE (NV_PA_APB_MISC_BASE + 0x0800) 20 #define NV_PA_APB_UARTA_BASE (NV_PA_APB_MISC_BASE + 0x6000) [all …]
|
| /OK3568_Linux_fs/kernel/arch/arm/boot/dts/ |
| H A D | spear310.dtsi | 15 ranges = <0x40000000 0x40000000 0x10000000 16 0xb0000000 0xb0000000 0x10000000 17 0xd0000000 0xd0000000 0x30000000>; 21 reg = <0xb4000000 0x1000>; 29 reg = <0x44000000 0x1000 /* FSMC Register */ 30 0x40000000 0x0010 /* NAND Base DATA */ 31 0x40020000 0x0010 /* NAND Base ADDR */ 32 0x40010000 0x0010>; /* NAND Base CMD */ 37 shirq: interrupt-controller@0xb4000000 { 39 reg = <0xb4000000 0x1000>; [all …]
|
| H A D | mps2.dtsi | 53 #clock-cells = <0>; 59 #clock-cells = <0>; 65 #clock-cells = <0>; 71 #clock-cells = <0>; 77 #clock-cells = <0>; 84 #clock-cells = <0>; 92 #clock-cells = <0>; 100 #clock-cells = <0>; 108 #clock-cells = <0>; 116 #clock-cells = <0>; [all …]
|
| H A D | stm32f7-pinctrl.dtsi | 15 ranges = <0 0x40020000 0x3000>; 17 st,syscfg = <&syscfg 0x8>; 25 reg = <0x0 0x400>; 26 clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOA)>; 35 reg = <0x400 0x400>; 36 clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOB)>; 45 reg = <0x800 0x400>; 46 clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOC)>; 55 reg = <0xc00 0x400>; 56 clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOD)>; [all …]
|
| H A D | stm32h743.dtsi | 54 #clock-cells = <0>; 56 clock-frequency = <0>; 60 #clock-cells = <0>; 66 #clock-cells = <0>; 68 clock-frequency = <0>; 75 reg = <0x40000c00 0x400>; 82 #size-cells = <0>; 84 reg = <0x40002400 0x400>; 95 trigger@0 { 97 reg = <0>; [all …]
|
| H A D | stm32f4-pinctrl.dtsi | 51 ranges = <0 0x40020000 0x3000>; 53 st,syscfg = <&syscfg 0x8>; 61 reg = <0x0 0x400>; 62 clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>; 71 reg = <0x400 0x400>; 72 clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>; 81 reg = <0x800 0x400>; 82 clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>; 91 reg = <0xc00 0x400>; 92 clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>; [all …]
|
| H A D | vfxxx.dtsi | 33 #clock-cells = <0>; 39 #clock-cells = <0>; 46 offset = <0x0>; 47 mask = <0x1000>; 66 reg = <0x40000000 0x00070000>; 71 reg = <0x40001000 0x800>; 76 reg = <0x40001800 0x400>; 85 reg = <0x40018000 0x2000>, 86 <0x40024000 0x1000>, 87 <0x40025000 0x1000>; [all …]
|
| /OK3568_Linux_fs/u-boot/doc/device-tree-bindings/pinctrl/ |
| H A D | st,stm32-pinctrl.txt | 26 - 0 for active high 49 ranges = <0 0x40020000 0x3000>; 55 reg = <0x0 0x400>; 56 resets = <&reset_ahb1 0>; 83 - port: The gpio port index (PA = 0, PB = 1, ..., PK = 11) 84 - line: The line offset within the port (PA0 = 0, PA1 = 1, ..., PA15 = 15) 86 * 0 : GPIO IN 87 * 1 : Alternate Function 0 106 < 0 > : Low speed 115 usart1_pins_a: usart1@0 { [all …]
|
| /OK3568_Linux_fs/kernel/Documentation/devicetree/bindings/pinctrl/ |
| H A D | st,stm32-pinctrl.yaml | 46 - The field mask of IRQ mux, needed if different of 0xf. 57 '^gpio@[0-9a-f]*$': 103 minimum: 0 113 '-[0-9]*$': 132 - port: The gpio port index (PA = 0, PB = 1, ..., PK = 11) 133 - line: The line offset within the port (PA0 = 0, PA1 = 1, ..., PA15 = 15) 135 * 0 : GPIO 136 * 1 : Alternate Function 0 175 0: Low speed 180 enum: [0, 1, 2, 3] [all …]
|
| /OK3568_Linux_fs/u-boot/arch/arm/dts/ |
| H A D | stm32f746.dtsi | 56 #clock-cells = <0>; 58 clock-frequency = <0>; 66 reg = <0x40028000 0x8000>; 78 reg = <0xA0000000 0x1000>; 79 clocks = <&rcc 0 STM32F7_AHB3_CLOCK(FMC)>; 86 #size-cells = <0>; 87 reg = <0xA0001000 0x1000>, <0x90000000 0x10000000>; 91 clocks = <&rcc 0 STM32F7_AHB3_CLOCK(QSPI)>; 96 reg = <0x40011000 0x400>; 98 clocks = <&rcc 0 STM32F7_APB2_CLOCK(USART1)>; [all …]
|
| /OK3568_Linux_fs/kernel/arch/m68k/ifpsp060/ |
| H A D | fpsp.sa | 1 .long 0x60ff0000,0x17400000,0x60ff0000,0x15f40000 2 .long 0x60ff0000,0x02b60000,0x60ff0000,0x04700000 3 .long 0x60ff0000,0x1b100000,0x60ff0000,0x19aa0000 4 .long 0x60ff0000,0x1b5a0000,0x60ff0000,0x062e0000 5 .long 0x60ff0000,0x102c0000,0x51fc51fc,0x51fc51fc 6 .long 0x51fc51fc,0x51fc51fc,0x51fc51fc,0x51fc51fc 7 .long 0x51fc51fc,0x51fc51fc,0x51fc51fc,0x51fc51fc 8 .long 0x51fc51fc,0x51fc51fc,0x51fc51fc,0x51fc51fc 9 .long 0x2f00203a,0xff2c487b,0x0930ffff,0xfef8202f 10 .long 0x00044e74,0x00042f00,0x203afef2,0x487b0930 [all …]
|
| /OK3568_Linux_fs/kernel/drivers/ata/ |
| H A D | ahci_tegra.c | 27 #define SATA_CONFIGURATION_0 0x180 28 #define SATA_CONFIGURATION_0_EN_FPCI BIT(0) 31 #define SCFG_OFFSET 0x1000 33 #define T_SATA0_CFG_1 0x04 34 #define T_SATA0_CFG_1_IO_SPACE BIT(0) 39 #define T_SATA0_CFG_9 0x24 40 #define T_SATA0_CFG_9_BASE_ADDRESS 0x40020000 42 #define SATA_FPCI_BAR5 0x94 43 #define SATA_FPCI_BAR5_START_MASK (0xfffffff << 4) 44 #define SATA_FPCI_BAR5_START (0x0040020 << 4) [all …]
|
| /OK3568_Linux_fs/u-boot/drivers/net/ |
| H A D | zynq_gem.c | 33 #define ZYNQ_GEM_PHYMNTNC_OP_MASK 0x40020000 /* operation mask bits */ 34 #define ZYNQ_GEM_PHYMNTNC_OP_R_MASK 0x20000000 /* read operation */ 35 #define ZYNQ_GEM_PHYMNTNC_OP_W_MASK 0x10000000 /* write operation */ 39 #define ZYNQ_GEM_RXBUF_EOF_MASK 0x00008000 /* End of frame. */ 40 #define ZYNQ_GEM_RXBUF_SOF_MASK 0x00004000 /* Start of frame. */ 41 #define ZYNQ_GEM_RXBUF_LEN_MASK 0x00003FFF /* Mask for length field */ 43 #define ZYNQ_GEM_RXBUF_WRAP_MASK 0x00000002 /* Wrap bit, last BD */ 44 #define ZYNQ_GEM_RXBUF_NEW_MASK 0x00000001 /* Used bit.. */ 45 #define ZYNQ_GEM_RXBUF_ADD_MASK 0xFFFFFFFC /* Mask for address */ 48 #define ZYNQ_GEM_TXBUF_WRAP_MASK 0x40000000 [all …]
|
| /OK3568_Linux_fs/kernel/arch/m68k/ifpsp060/src/ |
| H A D | fplsp.S | 37 short 0x0000 39 short 0x0000 41 short 0x0000 44 short 0x0000 46 short 0x0000 48 short 0x0000 51 short 0x0000 53 short 0x0000 55 short 0x0000 58 short 0x0000 [all …]
|
| H A D | fpsp.S | 43 set _off_bsun, 0x00 44 set _off_snan, 0x04 45 set _off_operr, 0x08 46 set _off_ovfl, 0x0c 47 set _off_unfl, 0x10 48 set _off_dz, 0x14 49 set _off_inex, 0x18 50 set _off_fline, 0x1c 51 set _off_fpu_dis, 0x20 52 set _off_trap, 0x24 [all …]
|
| H A D | pfpsp.S | 42 set _off_bsun, 0x00 43 set _off_snan, 0x04 44 set _off_operr, 0x08 45 set _off_ovfl, 0x0c 46 set _off_unfl, 0x10 47 set _off_dz, 0x14 48 set _off_inex, 0x18 49 set _off_fline, 0x1c 50 set _off_fpu_dis, 0x20 51 set _off_trap, 0x24 [all …]
|
| /OK3568_Linux_fs/external/rkwifibt/drivers/rtl8822cs/hal/phydm/rtl8822c/ |
| H A D | halhwimg8822c_bb.c | 30 #define CUT_DONT_CARE 0xf 31 #define RFE_DONT_CARE 0xff 32 #define PARA_IF 0x8 33 #define PARA_ELSE_IF 0x9 34 #define PARA_ELSE 0xa 35 #define PARA_END 0xb 36 #define PARA_CHK 0x4 47 u32 cut_para = 0, rfe_para = 0; in halbb_sel_headline() 48 u32 compare_target = 0; in halbb_sel_headline() 49 u32 cut_max = 0; in halbb_sel_headline() [all …]
|
| /OK3568_Linux_fs/kernel/drivers/net/wireless/realtek/rtw88/ |
| H A D | rtw8822c_table.c | 16 0x80000015, 0x00000000, 0x40000000, 0x00000000, 17 0x1D90, 0x300001FF, 18 0x1D90, 0x300101FE, 19 0x1D90, 0x300201FD, 20 0x1D90, 0x300301FC, 21 0x1D90, 0x300401FB, 22 0x1D90, 0x300501FA, 23 0x1D90, 0x300601F9, 24 0x1D90, 0x300701F8, 25 0x1D90, 0x300801F7, [all …]
|