Changes in Makefile

02ccab1908c405fe1449457d4a0d343784a30acb - Merge branch 'master' of git://www.denx.de/git/u-boot-imx

Sun, 19 Mar 2017 18:49:26 +0000

Merge branch 'master' of git://www.denx.de/git/u-boot-imxSigned-off-by: Tom Rini Conflicts: configs/bk4r1_defconfig configs/colibri_vf_defconfig configs/pcm052_defconfig include/configs/colibri_vf.h include/configs/pcm052.h List of files: /rk3399_rockchip-uboot/drivers/pinctrl/nxp/Makefile

4aa9d4d09523679ee9463cfade86de2bbf860273 - pinctrl: Add i.MX7ULP pinctrl driver

Wed, 22 Feb 2017 08:21:49 +0000

pinctrl: Add i.MX7ULP pinctrl driverAdd i.MX7ULP pinctrl driver.Select CONFIG_PINCTRL_IMX7ULP to use this driver.Signed-off-by: Peng Fan Reviewed-by: Simon Glass Reviewed-by : Stefano Babic List of files: /rk3399_rockchip-uboot/drivers/pinctrl/nxp/Makefile

8ea05705a70135a94419b0d243666c1b51fe1f8d - Merge branch 'master' of git://www.denx.de/git/u-boot-imx

Sun, 18 Dec 2016 18:54:25 +0000

Merge branch 'master' of git://www.denx.de/git/u-boot-imxMigrate CONFIG_ARCH_USE_MEMSET/MEMCPY with this merge.Signed-off-by: Tom Rini List of files: /rk3399_rockchip-uboot/drivers/pinctrl/nxp/Makefile

98d62e618bb9475eee799b7095803285ecf3a5ae - arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC

Fri, 04 Nov 2016 10:57:02 +0000

arm: imx: add i.MX53 Beckhoff CX9020 Embedded PCAdd CX9020 board based on mx53loco.Add simplified imx53 base device tree from kernel v4.8-rc8, to reuseserial_mxc with DTE and prepare for device tree migration of otherfunctions and imx53 devices.The CX9020 differs from i.MX53 Quick Start Board by:- use uart2 instead of uart1- DVI-D connector instead of VGA- no audio- CCAT FPGA connected to emi- enable rtcSigned-off-by: Patrick Bruenn List of files: /rk3399_rockchip-uboot/drivers/pinctrl/nxp/Makefile

595af9db2422fa5ae734cfe615415b17a5098f34 - Merge branch 'master' of git://www.denx.de/git/u-boot-imx

Sun, 21 Feb 2016 12:56:16 +0000

Merge branch 'master' of git://www.denx.de/git/u-boot-imx List of files: /rk3399_rockchip-uboot/drivers/pinctrl/nxp/Makefile

c4068dfb31e16f5a27f7177a156cd7a4271ececb - pinctrl: imx: Support i.MX7D

Wed, 03 Feb 2016 02:06:08 +0000

pinctrl: imx: Support i.MX7DIntroudce i.MX7 pinctrl driver support.For now only i.MX7D supported.There are two iomux controllers in i.MX7D, iomuxc and iomuxc_lpsr.To iomuxc_lpsr, ZERO_OFFSET_VALID is set, means offset of mux_regand conf_reg can begin at 0.Signed-off-by: Peng Fan Reviewed-by: Simon Glass List of files: /rk3399_rockchip-uboot/drivers/pinctrl/nxp/Makefile

745df68d362346306900678178b8a7d5bbd73d0e - pinctrl: imx: Introduce pinctrl driver for i.MX6

Wed, 03 Feb 2016 02:06:07 +0000

pinctrl: imx: Introduce pinctrl driver for i.MX6Introduce pinctrl for i.MX61. pinctrl-imx.c is for common usage. It's used by i.MX6/7.2. Add PINCTRL_IMX PINCTRL_IMX6 Kconfig entry.3. To the pinctrl_ops implementation, only set_state is implemented. To i.MX6/7, the pinctrl dts entry is as following:&iomuxc { pinctrl-names = "default"; pinctrl_csi1: csi1grp { fsl,pins = < MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088 MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088 MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088 >; }; [.....]}; there is no property named function or groups. So pinctrl_generic_set_state can not be used here.5. This driver is a simple implementation for i.mx iomux controller, only parse the fsl,pins property and write value to registers.6. With DEBUG enabled, we can see log when "i2c bus 0": " set_state_simple op missing imx_pinctrl_set_state: i2c1grp mux_reg 0x14c, conf_reg 0x3bc, input_reg 0x5d8, mux_mode 0x0, input_val 0x1, config_val 0x4000007f write mux: offset 0x14c val 0x10 select_input: offset 0x5d8 val 0x1 write config: offset 0x3bc val 0x7f mux_reg 0x148, conf_reg 0x3b8, input_reg 0x5d4, mux_mode 0x0, input_val 0x1, config_val 0x4000007f write mux: offset 0x148 val 0x10 select_input: offset 0x5d4 val 0x1 write config: offset 0x3b8 val 0x7f " this means imx6 pinctrl driver works as expected.Signed-off-by: Peng Fan Reviewed-by: Simon Glass List of files: /rk3399_rockchip-uboot/drivers/pinctrl/nxp/Makefile