Changes in Makefile

e59905bf16f6e10296d2177d255e06a02d59e374 - irq: use CONFIG_ROCKCHIP_GPIO_V2 instead of CONFIG_IRQ2GPIO_V2

Thu, 28 May 2020 08:31:57 +0000

irq: use CONFIG_ROCKCHIP_GPIO_V2 instead of CONFIG_IRQ2GPIO_V2Signed-off-by: Joseph Chen Change-Id: Id8b232efce483501053bcbd779a444d395c061fc List of files: /rk3399_rockchip-uboot/drivers/irq/Makefile

5a157e97d57cf1982680f08fb2986d4206700d47 - Merge branch 'thunder-boot' into next-dev

Tue, 12 May 2020 02:37:37 +0000

Merge branch 'thunder-boot' into next-dev List of files: /rk3399_rockchip-uboot/drivers/irq/Makefile

0fdee37b0a1bc43510f82d0deb22d27904619ddb - drivers: irq: add irq to gpio v2 transfer support

Wed, 25 Mar 2020 13:11:29 +0000

drivers: irq: add irq to gpio v2 transfer supportSome platform with new GPIO IP implements the low/highregisters with write mask. This configure handles it.Signed-off-by: Joseph Chen Change-Id: I855357d29e7fba072b867c06a31a049462ebf6ff List of files: /rk3399_rockchip-uboot/drivers/irq/Makefile

41766119095f80cbdb26bf10e9ac7347bc3185a3 - irq: add virq irq-chip support

Sat, 27 Jul 2019 02:44:31 +0000

irq: add virq irq-chip supportThis patch support the device to add its interrupt controller as "irq chip"into generic interrupt framework, the other driver can request its childinterrupt like a real hardware irq.Example for PMIC: GIC-\ |- ... |- GPIO-\ |- ... |- PMIC-\ |_ virq_0 |_ virq_1 |_ virq_2 |... |_ virq_nChange-Id: I17716f3db494a85fc22b23ff18042771a6116da8Signed-off-by: Joseph Chen List of files: /rk3399_rockchip-uboot/drivers/irq/Makefile

4e6670fe63b534b8dfcf07b7547078f9298dd574 - drivers: add irq interrupt framework support

Mon, 25 Sep 2017 06:44:10 +0000

drivers: add irq interrupt framework supportThis patch add support for IRQ interrupt, FIQ not included.It will be enabled when you select CONFIG_GICV2 or CONFIG_GICV3.The framework support gic interrupt and gpio interrupt, relative APIsare provided in: ./include/irq-platform.hIf you'd like to add a new platform support into interrupt framework,please follow the steps:1. add relative definitions in the file like other platforms: ./include/irq-platform.h2. add GICD, GICC and GICR(for GICV3) base address definitions in the rkxxx-common.h, they are needed in: arch/arm/cpu/armv8/start.S;3. enable CONFIG_GICV2 or CONFIG_GICV3.Notice:1. the framework is initialize in function 'interrupt_init()' of _sequence_r[]. So you should not request irqs too early.2. IRQ stack size is configured by CONFIG_IRQ_STACK_SIZE, the default value is 8KB when CONFIG_IRQ_STACK_SIZE is absent.Change-Id: I3d9e29873c9d64cd28aabd13a61111438c5902b0Signed-off-by: Joseph Chen List of files: /rk3399_rockchip-uboot/drivers/irq/Makefile