Changes in uniphier_v8_defconfig

577968e5669858e1d5bcb651ab28d60d20166252 - UPSTREAM: Convert CONFIG_MTD_PARTITIONS et al to Kconfig

Sun, 08 Jul 2018 03:18:22 +0000

UPSTREAM: Convert CONFIG_MTD_PARTITIONS et al to KconfigThis converts the following to Kconfig: CONFIG_MTD_PARTITIONS CONFIG_MTD_DEVICESigned-off-by: Adam Ford Change-Id: I90c45c7716965009c00d18a19f5491f19b1ab8b3Signed-off-by: Jon Lin (cherry picked from commit 9c5b00973bceb7c0192bd6b03672d69b092700b4) List of files: /rk3399_rockchip-uboot/configs/uniphier_v8_defconfig

0e13c182e0b4ee5b7e5efee72614cd23f8a5e6fc - Move CONFIG_PANIC_HANG to Kconfig

Mon, 04 Dec 2017 03:37:00 +0000

Move CONFIG_PANIC_HANG to KconfigFreescale (NXP) boards have lots of defconfig files per board.I used "imply PANIC_HANG" for them.Change-Id: I56347810ee33ccd8bb3553b0ee95b858e827ce9bSigned-off-by: Masahiro Yamada Reviewed-by: York Sun Signed-off-by: Kever Yang (cherry picked from commit 7e3caa81e0e9cc5e2beed4a3a1c334e2119f4498) List of files: /rk3399_rockchip-uboot/configs/uniphier_v8_defconfig

e3f24d4f2c4ce48f666ef6098e166521dde6f688 - Kconfig: Add EEPROM options to Kconfig when I2C_EEPROM is set

Sun, 13 Aug 2017 14:00:28 +0000

Kconfig: Add EEPROM options to Kconfig when I2C_EEPROM is setAdd the following options to drivers/misc/Kconfig: SYS_I2C_EEPROM_ADDR SYS_I2C_EEPROM_BUS SYS_EEPROM_SIZE SYS_EEPROM_PAGE_WRITE_BITS SYS_EEPROM_PAGE_WRITE_DELAY_MS SYS_I2C_EEPROM_ADDR_LEN SYS_I2C_EEPROM_ADDR_OVERFLOWThis does not migrate any boards, but provides a foundations forthose who want/need these optionsSigned-off-by: Adam Ford [trini: Migrate uniphier]Signed-off-by: Tom Rini List of files: /rk3399_rockchip-uboot/configs/uniphier_v8_defconfig

e4adc8ed3c684f41a307fde275e683a391f2a7ce - Merge git://git.denx.de/u-boot-uniphier

Fri, 01 Sep 2017 14:32:35 +0000

Merge git://git.denx.de/u-boot-uniphier- add {ofnode,dev}_read_resource_byname- provide DT probe hook to Denali NAND driver- update clk/reset driver- update DT- misc cleanups List of files: /rk3399_rockchip-uboot/configs/uniphier_v8_defconfig

0cc0c544bc317548885721d2312c90185642f98c - ARM: uniphier: enable Denali NAND driver for 64bit SoCs

Tue, 29 Aug 2017 15:51:30 +0000

ARM: uniphier: enable Denali NAND driver for 64bit SoCsNow the entry to the NAND driver init can be is controlled by DT;it should not hurt to compile the driver all the time.Signed-off-by: Masahiro Yamada List of files: /rk3399_rockchip-uboot/configs/uniphier_v8_defconfig

88663126a009d0c354d832e005a5b3b511e5c7fb - configs: Resync with savedefconfig

Mon, 14 Aug 2017 23:58:53 +0000

configs: Resync with savedefconfigRsync all defconfig files using moveconfig.pySigned-off-by: Tom Rini List of files: /rk3399_rockchip-uboot/configs/uniphier_v8_defconfig

f19955a01482d118eac0fdaf530ec6e5b08cf414 - Merge git://git.denx.de/u-boot-uniphier

Wed, 26 Jul 2017 15:29:25 +0000

Merge git://git.denx.de/u-boot-uniphier List of files: /rk3399_rockchip-uboot/configs/uniphier_v8_defconfig

a3f54bc74fb20c98aefebd9ca9a250e2f3f9e538 - ARM: uniphier: enable CONFIG_CMD_FS_GENERIC

Thu, 13 Jul 2017 11:32:18 +0000

ARM: uniphier: enable CONFIG_CMD_FS_GENERICEnable file system commands such as load, ls.Signed-off-by: Masahiro Yamada List of files: /rk3399_rockchip-uboot/configs/uniphier_v8_defconfig

4f66e09bb9fbc47b73f67c3cc08ee2663e8fcdb1 - Merge branch 'master' of git://git.denx.de/u-boot

Tue, 09 May 2017 16:03:44 +0000

Merge branch 'master' of git://git.denx.de/u-bootSigned-off-by: Stefano Babic List of files: /rk3399_rockchip-uboot/configs/uniphier_v8_defconfig

12af9399e77c809fdf5f9776d5bc1865ceab577d - Merge branch 'master' of git://git.denx.de/u-boot-uniphier

Tue, 25 Apr 2017 01:08:42 +0000

Merge branch 'master' of git://git.denx.de/u-boot-uniphier List of files: /rk3399_rockchip-uboot/configs/uniphier_v8_defconfig

fed9c76641b02ccbda4119d1bee34767c8729107 - ARM: uniphier: enable PSCI sysreset for uniphier_v8_defconfig

Thu, 20 Apr 2017 07:54:42 +0000

ARM: uniphier: enable PSCI sysreset for uniphier_v8_defconfigThis configuration is supposed to be used with ARM Trusted Firmware,so the SYSTEM_RESET is implemented in BL31. Invoke PSCI instead ofU-Boot's own reset code because we need to coordinate with SCP(System Control Processor) for the system-level power management.Signed-off-by: Masahiro Yamada List of files: /rk3399_rockchip-uboot/configs/uniphier_v8_defconfig

8728c97eff5bd95f58320f886ae305f17931a374 - configs: Re-sync

Mon, 13 Mar 2017 17:48:42 +0000

configs: Re-syncSigned-off-by: Tom Rini List of files: /rk3399_rockchip-uboot/configs/uniphier_v8_defconfig

d38de7cb03adf88e18c05d840c2528b7a5af2f9b - Merge branch 'master' of git://git.denx.de/u-boot-uniphier

Thu, 23 Feb 2017 15:12:41 +0000

Merge branch 'master' of git://git.denx.de/u-boot-uniphier - Fix regressions caused by the previous reworks - Add pin configuration support - Re-work SPL code - Update DRAM and PLL setup code - Enable needed configs, disable unneeded configs List of files: /rk3399_rockchip-uboot/configs/uniphier_v8_defconfig

2af94aafa50fc6c198379fe730f59f3df07184d0 - ARM: uniphier: enable CONFIG_CMD_CONFIG

Tue, 21 Feb 2017 06:09:11 +0000

ARM: uniphier: enable CONFIG_CMD_CONFIGThis command is useful to see which config options are enabled onthe running U-Boot image.Signed-off-by: Masahiro Yamada List of files: /rk3399_rockchip-uboot/configs/uniphier_v8_defconfig

c05a59d2947894350c0ea7a2507aee70b3e91d8b - ARM: uniphier: enable CONFIG_CMD_GPT

Fri, 17 Feb 2017 07:17:55 +0000

ARM: uniphier: enable CONFIG_CMD_GPTEnable CONFIG_CMD_GPT, keeping CONFIG_SPL_EFI_PARTITION because theSPL for UniPhier platform does not recognize any partitions.Signed-off-by: Masahiro Yamada List of files: /rk3399_rockchip-uboot/configs/uniphier_v8_defconfig

5c8c6da1329f6afae318e70de97b32369ea53135 - ARM: uniphier: disable CONFIG_MTD_NOR_FLASH

Mon, 13 Feb 2017 01:29:55 +0000

ARM: uniphier: disable CONFIG_MTD_NOR_FLASHThis feature is seldom used these days on UniPhier boards.Signed-off-by: Masahiro Yamada List of files: /rk3399_rockchip-uboot/configs/uniphier_v8_defconfig

1b280978c0da23b0058123eaabb55f7f69adf2ce - ARM: uniphier: enable generic EHCI driver for uniphier_v8_defconfig

Tue, 07 Feb 2017 12:25:13 +0000

ARM: uniphier: enable generic EHCI driver for uniphier_v8_defconfigThe LD11 SoC is equipped with USB EHCI controllers.Signed-off-by: Masahiro Yamada List of files: /rk3399_rockchip-uboot/configs/uniphier_v8_defconfig

e856bdcfb49291d30b19603fc101bea096c48196 - flash: complete CONFIG_SYS_NO_FLASH move with renaming

Sat, 11 Feb 2017 13:43:54 +0000

flash: complete CONFIG_SYS_NO_FLASH move with renamingWe repeated partial moves for CONFIG_SYS_NO_FLASH, but this isnot completed. Finish this work by the tool.During this move, let's rename it to CONFIG_MTD_NOR_FLASH.Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH"than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic willmake the code more readable. Besides, negative meaning symbols donot fit in obj-$(CONFIG_...) style Makefiles.This commit was created as follows:[1] Edit "default n" to "default y" in the config entry in common/Kconfig.[2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH"[3] Rename the instances in defconfigs by the following: find . -path './configs/*_defconfig' | xargs sed -i \ -e '/CONFIG_SYS_NO_FLASH=y/d' \ -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/'[4] Change the conditionals by the following: find . -name '*.[ch]' | xargs sed -i \ -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \ -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \ -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \ -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/'[5] Modify the following manually - Rename the rest of instances - Remove the description from README - Create the new Kconfig entry in drivers/mtd/Kconfig - Remove the old Kconfig entry from common/Kconfig - Remove the garbage comments from include/configs/*.hSigned-off-by: Masahiro Yamada List of files: /rk3399_rockchip-uboot/configs/uniphier_v8_defconfig

e5ec48152ad13ada83c541cdf7f47d5867c506db - Kconfig: Migrate BOARD_LATE_INIT to a select

Mon, 23 Jan 2017 00:43:11 +0000

Kconfig: Migrate BOARD_LATE_INIT to a selectThis option should not really be user selectable. Note that on PowerPCwe currently only need BOARD_LATE_INIT when CHAIN_OF_TRUST is enabled so beconditional on that.Signed-off-by: Tom Rini Acked-by: Masahiro Yamada (for UniPhier) List of files: /rk3399_rockchip-uboot/configs/uniphier_v8_defconfig

0c9e85f67cd86d2d7a3424ea3ebff0e6db7a3915 - Merge branch 'master' of git://git.denx.de/u-boot-uniphier

Sun, 22 Jan 2017 22:07:48 +0000

Merge branch 'master' of git://git.denx.de/u-boot-uniphier - Allow to disable SPL (mainly for ATF) - Refactor SoC init code - Update DRAM settings - Add PXs3 SoC support (DT, pinctrl driver, SoC code) List of files: /rk3399_rockchip-uboot/configs/uniphier_v8_defconfig