Changes in uniphier_ld4_sld8_defconfig

577968e5669858e1d5bcb651ab28d60d20166252 - UPSTREAM: Convert CONFIG_MTD_PARTITIONS et al to Kconfig

Sun, 08 Jul 2018 03:18:22 +0000

UPSTREAM: Convert CONFIG_MTD_PARTITIONS et al to KconfigThis converts the following to Kconfig: CONFIG_MTD_PARTITIONS CONFIG_MTD_DEVICESigned-off-by: Adam Ford Change-Id: I90c45c7716965009c00d18a19f5491f19b1ab8b3Signed-off-by: Jon Lin (cherry picked from commit 9c5b00973bceb7c0192bd6b03672d69b092700b4) List of files: /rk3399_rockchip-uboot/configs/uniphier_ld4_sld8_defconfig

0e13c182e0b4ee5b7e5efee72614cd23f8a5e6fc - Move CONFIG_PANIC_HANG to Kconfig

Mon, 04 Dec 2017 03:37:00 +0000

Move CONFIG_PANIC_HANG to KconfigFreescale (NXP) boards have lots of defconfig files per board.I used "imply PANIC_HANG" for them.Change-Id: I56347810ee33ccd8bb3553b0ee95b858e827ce9bSigned-off-by: Masahiro Yamada Reviewed-by: York Sun Signed-off-by: Kever Yang (cherry picked from commit 7e3caa81e0e9cc5e2beed4a3a1c334e2119f4498) List of files: /rk3399_rockchip-uboot/configs/uniphier_ld4_sld8_defconfig

e3f24d4f2c4ce48f666ef6098e166521dde6f688 - Kconfig: Add EEPROM options to Kconfig when I2C_EEPROM is set

Sun, 13 Aug 2017 14:00:28 +0000

Kconfig: Add EEPROM options to Kconfig when I2C_EEPROM is setAdd the following options to drivers/misc/Kconfig: SYS_I2C_EEPROM_ADDR SYS_I2C_EEPROM_BUS SYS_EEPROM_SIZE SYS_EEPROM_PAGE_WRITE_BITS SYS_EEPROM_PAGE_WRITE_DELAY_MS SYS_I2C_EEPROM_ADDR_LEN SYS_I2C_EEPROM_ADDR_OVERFLOWThis does not migrate any boards, but provides a foundations forthose who want/need these optionsSigned-off-by: Adam Ford [trini: Migrate uniphier]Signed-off-by: Tom Rini List of files: /rk3399_rockchip-uboot/configs/uniphier_ld4_sld8_defconfig

e4adc8ed3c684f41a307fde275e683a391f2a7ce - Merge git://git.denx.de/u-boot-uniphier

Fri, 01 Sep 2017 14:32:35 +0000

Merge git://git.denx.de/u-boot-uniphier- add {ofnode,dev}_read_resource_byname- provide DT probe hook to Denali NAND driver- update clk/reset driver- update DT- misc cleanups List of files: /rk3399_rockchip-uboot/configs/uniphier_ld4_sld8_defconfig

b173c19663c5bbfba1cbfa66c58ddbab60634db4 - ARM: uniphier: move CONFIG_NAND to defconfig

Tue, 29 Aug 2017 06:41:32 +0000

ARM: uniphier: move CONFIG_NAND to defconfigThis imply was added when the option was moved by the moveconfig tool,but the intention is not clear. Move it to defconfig.Signed-off-by: Masahiro Yamada List of files: /rk3399_rockchip-uboot/configs/uniphier_ld4_sld8_defconfig

e2f87de0f8338d368bb35cbdee07d97c8cd0323a - ARM: uniphier: enable CONFIG_NAND_DENALI_DT

Sat, 26 Aug 2017 08:58:02 +0000

ARM: uniphier: enable CONFIG_NAND_DENALI_DTMigrate to the DT-based NAND init entry.Signed-off-by: Masahiro Yamada List of files: /rk3399_rockchip-uboot/configs/uniphier_ld4_sld8_defconfig

88663126a009d0c354d832e005a5b3b511e5c7fb - configs: Resync with savedefconfig

Mon, 14 Aug 2017 23:58:53 +0000

configs: Resync with savedefconfigRsync all defconfig files using moveconfig.pySigned-off-by: Tom Rini List of files: /rk3399_rockchip-uboot/configs/uniphier_ld4_sld8_defconfig

8f1a80e99e4a838d1540cdb1d59ccc7785fe4618 - configs: Migrate CMD_NAND*

Sat, 29 Jul 2017 01:31:42 +0000

configs: Migrate CMD_NAND*Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFSCMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into thedefconfig files.Tested-by: Adam Ford Signed-off-by: Tom Rini Reviewed-by: Bin Meng List of files: /rk3399_rockchip-uboot/configs/uniphier_ld4_sld8_defconfig

f19955a01482d118eac0fdaf530ec6e5b08cf414 - Merge git://git.denx.de/u-boot-uniphier

Wed, 26 Jul 2017 15:29:25 +0000

Merge git://git.denx.de/u-boot-uniphier List of files: /rk3399_rockchip-uboot/configs/uniphier_ld4_sld8_defconfig

a3f54bc74fb20c98aefebd9ca9a250e2f3f9e538 - ARM: uniphier: enable CONFIG_CMD_FS_GENERIC

Thu, 13 Jul 2017 11:32:18 +0000

ARM: uniphier: enable CONFIG_CMD_FS_GENERICEnable file system commands such as load, ls.Signed-off-by: Masahiro Yamada List of files: /rk3399_rockchip-uboot/configs/uniphier_ld4_sld8_defconfig

8728c97eff5bd95f58320f886ae305f17931a374 - configs: Re-sync

Mon, 13 Mar 2017 17:48:42 +0000

configs: Re-syncSigned-off-by: Tom Rini List of files: /rk3399_rockchip-uboot/configs/uniphier_ld4_sld8_defconfig

d38de7cb03adf88e18c05d840c2528b7a5af2f9b - Merge branch 'master' of git://git.denx.de/u-boot-uniphier

Thu, 23 Feb 2017 15:12:41 +0000

Merge branch 'master' of git://git.denx.de/u-boot-uniphier - Fix regressions caused by the previous reworks - Add pin configuration support - Re-work SPL code - Update DRAM and PLL setup code - Enable needed configs, disable unneeded configs List of files: /rk3399_rockchip-uboot/configs/uniphier_ld4_sld8_defconfig

2af94aafa50fc6c198379fe730f59f3df07184d0 - ARM: uniphier: enable CONFIG_CMD_CONFIG

Tue, 21 Feb 2017 06:09:11 +0000

ARM: uniphier: enable CONFIG_CMD_CONFIGThis command is useful to see which config options are enabled onthe running U-Boot image.Signed-off-by: Masahiro Yamada List of files: /rk3399_rockchip-uboot/configs/uniphier_ld4_sld8_defconfig

c05a59d2947894350c0ea7a2507aee70b3e91d8b - ARM: uniphier: enable CONFIG_CMD_GPT

Fri, 17 Feb 2017 07:17:55 +0000

ARM: uniphier: enable CONFIG_CMD_GPTEnable CONFIG_CMD_GPT, keeping CONFIG_SPL_EFI_PARTITION because theSPL for UniPhier platform does not recognize any partitions.Signed-off-by: Masahiro Yamada List of files: /rk3399_rockchip-uboot/configs/uniphier_ld4_sld8_defconfig

6012c3b659d58ceac9b4e7f27900de6e3b09a6b4 - ARM: uniphier: disable CONFIG_SPL_DOS_PARTITION

Fri, 17 Feb 2017 07:17:39 +0000

ARM: uniphier: disable CONFIG_SPL_DOS_PARTITIONThe SPL for UniPhier platform does not recognize any partitions.Do not compile unneeded features.Signed-off-by: Masahiro Yamada List of files: /rk3399_rockchip-uboot/configs/uniphier_ld4_sld8_defconfig

5c8c6da1329f6afae318e70de97b32369ea53135 - ARM: uniphier: disable CONFIG_MTD_NOR_FLASH

Mon, 13 Feb 2017 01:29:55 +0000

ARM: uniphier: disable CONFIG_MTD_NOR_FLASHThis feature is seldom used these days on UniPhier boards.Signed-off-by: Masahiro Yamada List of files: /rk3399_rockchip-uboot/configs/uniphier_ld4_sld8_defconfig

e856bdcfb49291d30b19603fc101bea096c48196 - flash: complete CONFIG_SYS_NO_FLASH move with renaming

Sat, 11 Feb 2017 13:43:54 +0000

flash: complete CONFIG_SYS_NO_FLASH move with renamingWe repeated partial moves for CONFIG_SYS_NO_FLASH, but this isnot completed. Finish this work by the tool.During this move, let's rename it to CONFIG_MTD_NOR_FLASH.Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH"than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic willmake the code more readable. Besides, negative meaning symbols donot fit in obj-$(CONFIG_...) style Makefiles.This commit was created as follows:[1] Edit "default n" to "default y" in the config entry in common/Kconfig.[2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH"[3] Rename the instances in defconfigs by the following: find . -path './configs/*_defconfig' | xargs sed -i \ -e '/CONFIG_SYS_NO_FLASH=y/d' \ -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/'[4] Change the conditionals by the following: find . -name '*.[ch]' | xargs sed -i \ -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \ -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \ -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \ -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/'[5] Modify the following manually - Rename the rest of instances - Remove the description from README - Create the new Kconfig entry in drivers/mtd/Kconfig - Remove the old Kconfig entry from common/Kconfig - Remove the garbage comments from include/configs/*.hSigned-off-by: Masahiro Yamada List of files: /rk3399_rockchip-uboot/configs/uniphier_ld4_sld8_defconfig

e5ec48152ad13ada83c541cdf7f47d5867c506db - Kconfig: Migrate BOARD_LATE_INIT to a select

Mon, 23 Jan 2017 00:43:11 +0000

Kconfig: Migrate BOARD_LATE_INIT to a selectThis option should not really be user selectable. Note that on PowerPCwe currently only need BOARD_LATE_INIT when CHAIN_OF_TRUST is enabled so beconditional on that.Signed-off-by: Tom Rini Acked-by: Masahiro Yamada (for UniPhier) List of files: /rk3399_rockchip-uboot/configs/uniphier_ld4_sld8_defconfig

0c9e85f67cd86d2d7a3424ea3ebff0e6db7a3915 - Merge branch 'master' of git://git.denx.de/u-boot-uniphier

Sun, 22 Jan 2017 22:07:48 +0000

Merge branch 'master' of git://git.denx.de/u-boot-uniphier - Allow to disable SPL (mainly for ATF) - Refactor SoC init code - Update DRAM settings - Add PXs3 SoC support (DT, pinctrl driver, SoC code) List of files: /rk3399_rockchip-uboot/configs/uniphier_ld4_sld8_defconfig

561ca649a8e3d459e95d23b903cd027096935278 - ARM: uniphier: make SPL optional for ARVv8 SoCs

Sat, 21 Jan 2017 09:05:22 +0000

ARM: uniphier: make SPL optional for ARVv8 SoCsWe may want to run different firmware before running U-Boot. Forexample, ARM Trusted Firmware runs before U-Boot, making U-Boota non-secure world boot loader. In this case, the SoC might beinitialized there, which enables us to skip SPL entirely.This commit removes "select SPL" to make it configurable. Thisalso enables the Multi SoC support for the UniPhier ARMv8 SoCs.(CONFIG_ARCH_UNIPHIER_V8_MULTI) Thanks to the driver model andDevice Tree, the U-Boot proper part is now written in a generic way.The board/SoC parameters reside in DT. The Multi SoC supportincreases the memory footprint a bit, but the U-Boot proper doesnot have strict memory constraint. This will mitigate the per-SoC(sometimes per-board) defconfig burden.Signed-off-by: Masahiro Yamada List of files: /rk3399_rockchip-uboot/configs/uniphier_ld4_sld8_defconfig